Transcript
4K 100 4K 100 KITS
KEY FEATURES • • • • • •
Excellent 3 way system for rear desk application Good power handling (100 w RMS / 200 w maximum) Extended frequency range (50-20000 Hz) Excellent sensitivity (94 dB) Paper cone on woofer and middle range units Aluminium tweeter diaphragm
WOOFER SPECIFICATIONS Nominal diameter Nominal impedance Power handling / maximum Sensitivity Frequency range Resonant frequency, fs D.C. voice coil resistance, Re Mechanical quality factor, Qms Electrical quality factor, Qes Total quality factor, Qts Equivalent air volume to Cms, Vas Efficiency, ho (%) Effective surface area, Sd Xmax
250 mm. 10 in. 4 ohms 100 W RMS / 200 W 95 dB 1w @ 1m 60 - 6000 Hz 57 Hz 3.9 ohms. 3.47 0.39 0.35 44 l. 2.1 380 cm2 3 mm
MID FREQ FREQ DRIVER DRIVER SPECIFICATIONS SPECIFICATIONS MID Nominal diameter Nominal impedance Power handling / maximum Sensitivity Frequency range
130 mm. 5.25 in. 4 ohms 30 W RMS / 60 W 87 dB 1w @ 1m 85 - 12500 Hz
TWEETER SPECIFICATIONS Nominal impedance Power handling / maximum Sensitivity Frequency range
CAJA CERRADA MOUNTING INFORMATION Woofer baffle cutout diameter Woofer mounting depth Mid range unit cutout diameter Mid range unit mounting depth Tweeter baffle cutout diameter Tweeter mounting depth Filter external dimensions
233 mm. 9.17 in. 103 mm. 4.06 in. 113 mm. 4.45 in. 55 mm. 2.17 in. 94 mm. 3.70 in. 39 mm. 1.54 in. 144 x 104 x 51 mm. 5.67 x 4.09 x 2 in.
FREQUENCY RESPONSE
4 ohms 25 W RMS / 50 W 94 dB 1w @ 1m 1 - 16 kHz
FILTER SPECIFICATIONS Power handling Crossover frequency Attenuation slope H.F. attenuation
150 W RMS 0.9 - 5 kHz 6 - 12 dB/oct. -3 dB, -6 dB
Note: on axis frequency response measured with loudspeaker standing on infinite baffle in anechoic chamber, 1w @ 1m.
097
Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain) ·Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail:
[email protected]·