4k Hdmi Over Hdbaset™ 2.0 Extender Set With Usb 2.0

Transcript

WYRESTORM PRODUCT SPECIFICATION SHEET 4K HDMI over HDBaseT™ 2.0 Extender Set with USB 2.0 | 2-way audio | Bi-directional IR & RS-232 EX-100-4K-PRO Key Features • • • • • Utilizes HDBaseT™ 2.0 for the latest in transmission technology 1080p transmission can be extended up to 150m/492ft over Cat6/6a cable Additional bi-directional audio channel allows for transfer of 5.1 digital audio between transmitter and receiver USB 2.0 ports offer full data transfer capability. Single host and dual device ports on both TX and RX 10/100 Ethernet ports on TX & RX for connection of 3 devices per extender pair WyreStorm’s first HDBaseT 2.0 device offers the very latest in transmission technology for a 4K ready HDCP 2.2 compatible solution up to 100m/328ft that’s overflowing with device connectivity for one of the most powerful and fully featured HDBaseT extender solutions on the market. Additional Features & Benefits • Featuring HDBaseT 2.0 offering the very latest in single cable transmission technology • 4K transmission (4096x2160@60hz/4:2:0) to 100m/328ft • 1080p transmission (1920x1080p@60Hz/48bit) to 150m/492ft • 5Play compliance supporting the extension of 4K and HD video, HD audio, Ethernet, Control and power along a single Cat6 cable • Dual USB 2.0 pass-through offering full data transfer capability and KVM functionality with single host and dual device ports on both Transmitter and Receiver • Dual Ethernet ports on Transmitter and Receiver for 10/100 LAN connection of three devices per extender pair • Bi-directional S/PDIF to both units sends and receives digital audio signals at either end • DIP Switch selection for direction of USB control, long cable mode and firmware update • Two-way PoH enables either device to be powered remotely • Audio embed on Transmitter and audio de-embed on Receiver via 3.5mm jack connection • Backwards compatible with HDBaseT 1.0 Transmitters or Receivers • HDCP 2.2 compliant • HDMI v1.4 • 3D supported • Cable termination follows IEEE-568B standards • LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link. • Threaded bushings allow use of both standard and locking DC power plugs • Phoenix port for additional power connection • Energy efficient universal power supply included • Mounting brackets included In the Box 1x EX-100-4K-PRO Transmitter 1x EX-100-4K-PRO Receiver 1x 12V DC 2A Power Supply (US/UK/EU) 2x 2-pin Screw Down Phoenix Connectors 2x 3-pin Screw Down Phoenix Connectors 2x IR Emitters 2x Wide-band IR Receivers (30-50KHz) 4x Mounting Brackets (1pr for TX and 1pr for RX) 1x Quickstart Guide US OFFICE: EMEA OFFICE:   TEL: +1 518-289-1293 TEL: + 44 (0) 1793 230 343 WYRESTORM PRODUCT SPECIFICATION SHEET Specification Audio and Video Inputs Outputs Communication and Control Transmitter 1x HDMI 19-pin type A 1x Line In 3.5mm (1/8in) Stereo Jack 1x S/PDIF In TOSLINK (Digital Optical) Receiver 1x S/PDIF In TOSLINK (Digital Optical) HDMI HDCP 2.2 | CEC DVI/D supported with adapter (not included) HDBaseT 1x 8-pin RJ-45 female HDCP 2.2 | CEC | PoH (2-way) | Bidirectional IR and RS-232 Transmitter 1x S/PDIF Out TOSLINK (Digital Optical) Receiver 1x HDMI 19-pin type A 1x Line Out 3.5mm (1/8in) Stereo Jack 1x S/PDIF Out TOSLINK (Digital Optical) Ethernet 2x 8-pin RJ-45 female 10/100 Mbps auto-negotiating IR 1x 3.5mm (1/8in) Mono – IR TX 1x 3.5mm (1/8in) Stereo – IR RX Bidirectional over HDBaseT RS-232 1x 3-pin Screw Down Phoenix Connector Bidirectional over HDBaseT USB 2.0 1x USB Type A: Local Host Control 2x USB Type B:Remote Host over HDBaseT Audio Formats 2ch PCM | Up to 7.1 DTS-X and Dolby Atmos Video Resolution (Max) HDMI 1920x1080 @60Hz 48bit (15m/50ft) 4096x2160p @60Hz 24bit 4:2:0 (7m/23ft) Using Cat5/5e 1920x1080@60Hz 36bit (100m/328ft) 1920x1080@60Hz 3D 36bit (100m/328ft) Using Cat6/6a 1920x1080@60Hz 36bit (150m/492ft) 1920x1080@60Hz 3D 36bit (150m/492ft) 3840x2160p@24/25/30Hz 4:4:4 24bit (100m/328ft) 4096x2160p@60Hz 4:2:0 24bit (100m/328ft) Color Depth 1080p: 48bit | 4K UHD: 24bit Maximum Pixel Clock 297 MHz 1x 5.5mm Male Barrel Jack 1x 2-pin Screw Down Phoenix Connector Input: 100~240V AC 50/60Hz Output: 12V DC 2A Max Power Consumption 26.5W PoH (2-way) 48V 15.4W Environmental Operating Temperature 32°F ~ 113°F (0°C ~ 45°C) 10% ~ 90%, non-condensing Storage Temperature -4°F to ~ 158°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing Height 20mm/0.79in Width 272mm/10.70in Depth 99mm/3.89in Weight 0.72kg/1.58lbs Regulatory Safety and Emission Personal Computer EX-100-4K-PRO Transmitter (TX) Power Supply Dimensions and Weight Basic Wiring Diagram Ethernet Cat5e/6/6a HDMI Power USB 2.0 Host CE | FCC Analog Audio 12 DC 2A Power Supply Hearing Induction Loop Digital Audio Ethernet Cat5e/6/6a Router or Switch EX-100-4K-PRO Receiver (RX) 12 DC 2A Power Supply RS-232 from Control System Ethernet Cat5e/6/6a HDMI RS-232 Short Throw Projector USB Flash Drive HDBaseT Cat5e/6/6a KEY Interactive Whiteboard Isochronous USB 2.0 Data Amplifier For additional product information visit wyrestorm.com For technical support contact: North America: +1 844-280-WYRE (9973) EMEA/ROW: +44 (0) 1793 230 343 160516