4k Hdmi Over Hdbaset™ 2.0 Extender Set With Usb 2.0 - D

Transcript

WYRESTORM PRODUCT SPECIFICATION SHEET 4K HDMI over HDBaseT™ 2.0 Extender Set with USB 2.0 | 2-way audio | Bi-directional IR & RS-232 EX-100-4K-PRO Key Features • • • • • Utilizes HDBaseT™ 2.0 for the latest in transmission technology 1080p transmission can be extended up to 150m/492ft over Cat6/6a cable Additional bi-directional audio channel allows for transfer of 5.1 digital audio between transmitter and receiver USB 2.0 ports offer full data transfer capability. Single host and dual device ports on both TX and RX 10/100 Ethernet ports on TX & RX for connection of 3 devices per extender pair WyreStorm’s first HDBaseT 2.0 device offers the very latest in transmission technology for a 4K ready HDCP 2.2 compatible solution up to 100m/328ft that’s overflowing with device connectivity for one of the most powerful and fully featured HDBaseT extender solutions on the market. Additional Features & Benefits • Featuring HDBaseT 2.0 offering the very latest in single cable transmission technology • 4K transmission (4096x2160@60hz/4:2:0) to 100m/328ft • 1080p transmission (1920x1080p@60Hz/48bit) to 150m/492ft • 5Play compliance supporting the extension of 4K and HD video, HD audio, Ethernet, Control and power along a single Cat6 cable • Dual USB 2.0 pass-through offering full data transfer capability and KVM functionality with single host and dual device ports on both Transmitter and Receiver • Dual Ethernet ports on Transmitter and Receiver for 10/100 LAN connection of three devices per extender pair • Bi-directional S/PDIF to both units sends and receives digital audio signals at either end • DIP Switch selection for direction of USB control, long cable mode and firmware update • Two-way PoH enables either device to be powered remotely • Audio embed on Transmitter and audio de-embed on Receiver via 3.5mm jack connection • Backwards compatible with HDBaseT 1.0 Transmitters or Receivers • HDCP 2.2 compliant • HDMI v1.4 • 3D supported • Cable termination follows IEEE-568B standards • LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link. • Threaded bushings allow use of both standard and locking DC power plugs • Phoenix port for additional power connection • Energy efficient universal power supply included • Mounting brackets included In the Box 1x EX-100-4K-PRO Transmitter 1x EX-100-4K-PRO Receiver 1x 12V DC 2A Power Supply (US/UK/EU) 2x 2-pin Screw Down Phoenix Connectors 2x 3-pin Screw Down Phoenix Connectors 2x IR Emitters 2x Wide-band IR Receivers (30-50KHz) 4x Mounting Brackets (1pr for TX and 1pr for RX) 1x Quickstart Guide US OFFICE: EMEA OFFICE:   TEL: +1 518-289-1293 TEL: + 44 (0) 1793 230 343 WYRESTORM PRODUCT SPECIFICATION SHEET Specification Environmental Audio and Video Audio Formats 2ch analog and Up to 7.1 DTS-HD Master Audio and Dolby TrueHD Operating Temperature 32°F ~ 113°F (0°C ~ 45°C) 10% ~ 90%, non-condensing Video Resolution 4096 x 2160p @ 60Hz 4:2:0 1920 x 1080 @ 60Hz (1080p60) Storage Temperature -4°F ~ 140°F (-20°C ~ 70°C) 10% ~ 90%, non-condensing Color Depth 48bit (1080p) | 24bit (4K) Dimensions and Weight Maximum Pixel Clock 297 MHz Height 20mm/0.79in Width 272mm/10.7in HDBaseT HDCP 2.2 | EDID | PoH | USB 2.0 | Bi-directional IR and RS-232 Depth 99mm/3.89in Weight 0.72kg/1.58lbs HDMI HDCP 2.2 | EDID | CEC DVI/D supported with adapter (not included) Regulatory Communication and Control Safety and Emission Ethernet 10/100 Mbps auto-negotiating IR Bi-directional over HDBaseT RS-232 Bi-directional over HDBaseT USB Local Host Control | Remote Host over HDBaseT CE | FCC | RoHS Power PoH 48V 15.4W Power Supply Input: 100~240V AC 50/60Hz Output: 12V DC 2A Max Power Consumption 26.5W Basic Wiring Diagram AV Receiver HDMI Source Router or Switch Ethernet Cat5e/6/6a IR TX HDMI from source Digital Audio EX-100-4K-PRO Transmitter (TX) KEY HDMI HDBaseT / Ethernet IR TX and RX 12 DC 2A Power Supply or HDBaseT Cat5e/6/6a IR to Control System CAB-IR-LINK (Sold Separately) Digital Audio Power EX-100-4K-PRO Receiver (RX) HDMI IR TX Ethernet Cat5e/6/6a Digital Audio return to TX IR RX For additional product information visit wyrestorm.com For technical support contact: North America: +1 844-280-WYRE (9973) HDMI Display EMEA/ROW: +44 (0) 1793 230 343 151014