Transcript
Hanron Lighting CO., Ltd ------ Professional LED Strip Lights M anufacturer
4W Square Panel Light Hanron Lighting Co., Limited’s LED Panel Light series 4W is designed and manufactured to replace the 25W incandescent /Halogen bulb, the superior SMD LED solution and purity aluminum radiator material helps the luminous efficacy high to 60LM/W, it is designed in excellent thermal management in conjoint structure by forging and stamping technology.
Feature 1. More than 84% electricity saving compare with ordinary energy-saving lamp. 2. Excellent heat dissipation structure, low light decay, and long lifespan (>25,000hrs) 3. Healthy light without ultraviolet and radiation 4. Both Dimmable and Non-Dimmable Available 5. Ideal for general lighting in hotels, restaurants, shops, offices and homes
Application Widespread used in commercial lighting project, villa, restaurant, hotel, meeting room, table lamp, decoration lamp, garden lamp.
Tel : +86 755 2359 5836
Mail:
[email protected]
Web: www.hanronlighting.com
Hanron Lighting CO., Ltd ------ Professional LED Strip Lights M anufacturer
Parameter Luminous Power Item No.
CRI Voltage Beam Flux
(W)
CCT
Dimension Cut-out L E D
LED
Material (Ra)
(V)
Angle
(mm)
(mm)
T y p e Q'ty(pcs)
(lm) AC100-240V
HR07-S304W
4W
250
3000K >80
Aluminum 120°
/50-60Hz AC100-240V
HR07-S40-4W 4W
250
4000K >80
6000K >80
20
107*107*23 90*90 SMD2835
20
Aluminum 120°
/50-60Hz
107*107*23 90*90 SMD2835 +PC
AC100-240V 250
20
Aluminum 120°
/50-60Hz
HR07-S60-4W 4W
107*107*23 90*90 SMD2835 +PC
+PC
Luminous Intensity Distribution curve
Tel : +86 755 2359 5836
Mail:
[email protected]
Web: www.hanronlighting.com
Hanron Lighting CO., Ltd ------ Professional LED Strip Lights M anufacturer
Installation
1.
Make a hole
2.
Connect the power wire
3.
Push spring
4.
Put the lamp into the hole
Caution 1.
Make sure operating conditions are in conformity with the information provided on the Products and its packaging
2.
Ambient temperature of the products in within the operating temperature range -40℃ to +65℃
3.
Relative humidity in the installation must be lower than 80% RH, never exceeds the IP rating of the products
4.
Prohibit any contact to the metal part of bulb base after connected to the power.
5.
Please check whether any bulbs damage caused by delivery or not before you unpacked and prepare to use the bulbs. If yes, please don't use it and inform the supplier. Tel : +86 755 2359 5836
Mail:
[email protected]
Web: www.hanronlighting.com
