Preview only show first 10 pages with watermark. For full document please download

5000 Raceway Deep Device Plate Installation Instructions

   EMBED

Share

Transcript

5007C-2 Deep Device Plate Installation Instructions 5007C-2 Deep devices such as Ground Fault Circuit Interrupters, Surge Suppressor Outlets and/or the Communications Activation Series inserts, may be utilized in the Wiremold Access™ 5000 Raceway System using this Deep Device Plate. A typical installation is illustrated in Figure 1. Twist off the two Spacers attached to the 5007C Device Bracket (see Figure 3). Snap the Device Mounting Bracket, 5007C into the base channel provided as in Figure 2. Assemble the device to the Device Bracket utilizing the Spacers as shown in Figure 1. Assemble the Deep Device Plate to the Raceway Base. Engage the hooks located next to the double window opening, to the lower (large) lip of the Raceway Base. Rotate the Device Plate toward the wall snapping it into place (see Figure 4). Assemble the desired Face Plate as shown in Figure 1. Figure 1 Trim Cover 5000T Deep Device Plate 5007C-2 5507 Series Face Plates Raceway Base 5000B Device Bracket w/Spacers 5007C St’d Blank Insert CASBLNK Raceway Cover 5000C CAS Series Inserts Figure 2 Figure 3 Base 5000B Device Bracket 5007C Device Bracket 5007C Spacer Figure 4 Finished Assembly Deep Device Plate Hook to Lip of Base The Wiremold Company 60 Woodlawn Street West Hartford, CT 06133-2500 ©1995 The Wiremold Company 40933 695