Transcript
Distributed by: BEST MATERIALS ® Ph: 800-474-7570, 602-272-8128 www.BestMaterials.com Email:
[email protected]
ABRASIVES
DIAMONDS
EQUIPMENT, SAWS & ACCESSORIES
SEE PAGES 4-41
SEE PAGES 42-61
SEE PAGES 62-95
Distributed by: BEST MATERIALS ® Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.BestMaterials.com Email:
[email protected]
SYMBOLS Laser Weld These are diamond blades where the segments or rim are welded to the core using laser technology.
EQUIPMENT FOR: STAFDA/FASTENERS/ BUILDING & CONSTRUCTION SUPPLY
ABRASIVES
Direct Sintering Technology Plus
NEW PRODUCTS.................... 4
Pearl Abrasive’s DST™ Plus is the latest segment bonding technology. This special bonding technique allows the diamond blade to have higher segments, thus improving blade life.
GRINDING .......................................... 6 DEPRESSED CENTER WHEELS, FLEXIBLE WHEELS, CUP STONES, MAXIDISCS™, WIRE BRUSHES, ACID BRUSH, SCRATCH BRUSHES, CARBIDE BUR, BENCH WHEELS
CUTTING .......................................... 26 Pearl Abrasive’s strong bonding process between the diamond matrix and core. DST™ promotes superior performance and blade safety.
INDUSTRIAL TOOL STORES
TILE
INDEX
Pearl Abrasive’s ADM™ is a special diamond patterning and layering technology. The diamonds are placed in specific patterns, layers and concentrations in order to achieve real cutting enhancements.
Direct Sintering Technology
RENTAL
WELDING & ORNAMENTAL IRON
ADM™ (Advanced Diamond Matrix)
Vacuum Brazed Technology VBT™ allows for approximately 60% to 75% more diamond particles to be exposed on the core. This exposure produces the aggressive cutting action.
Synthetic Resinoid Technology ™
A unique Pearl Abrasive exclusive grain which allows for superior abrasive performance and gets as much as 40% increased grinding efficiency. Great for stainless steel.
THIN CUT-OFF WHEELS, CUT-OFF WHEELS, SPECIALTY CUT-OFF WHEELS
SURFACE PREP ................................ 34 TURBO-CUT™, STRIPPING DISCS, FLAP WHEELS, QUICKMOUNT™, NON-WOVEN DISCS, SURFACE PREP WHEELS
SANDING .......................................... 36 FIBER DISCS, FIL-FREE DISCS, RESIN CLOTH BELTS, SHOP ROLLS, SANDPAPER SHEETS
DIAMONDS NEW PRODUCTS.................. 42 WAVED CORE TURBO RIM BLADES .... 44
STONE FABRICATION
Dry
FLAT CORE TURBO RIM BLADES ........ 45
Wet
HIGH SPEED TURBO
MASONRY/BRICK/ BLOCK
SEGMENTED BLADES ........................ 46 SPECIALTY BLADES .......................... 48
TOOL ICONS
TILE & STONE BLADES
.................... 51
CRACK-CHASER™ BLADES ................ 56
PAINT & HARDWARE LUMBER & ROOFING
........................ 45
CUP WHEELS .................................. 57 CORE BITS Right Angle Grinder
Right Angle Grinder
Circular Saw
Gas Powered Saw
...................................... 59
POLISHING PADS
............................ 61
IRON SUPPLY AUTOMOTIVE Chop Saw
WOODWORKING SUPPLY FLOORING SUPPLY
Core Drilling Machine
Shop Roll
Tile Saw
EQUIPMENT, SAWS AND ACCESSORIES NEW PRODUCTS.................. 62 FLOOR PREPARATION ........................ 65
Stationary Saw
Stationary/ Masonry Saw
Walk Behind Saw - High HP
Portable Belt Sander
JANITORIAL
HEXPIN® PLATES, SUPERCLUTCH™, HEXPIN® APPLICATION CHART, ATTACHMENTS, BUFFER, BUFFER ATTACHMENT
DUST CONTAINMENT ........................ 75 VACU-GUARD™, QUIKATTACH™, BUF-VAC™, SAW VAC™, WATERKIT
PLUMBING
POWER TOOL ACCESSORIES .............. 78 Hexpin® Plate
Die Grinder
Power Drill
Floor Grinder
MARINE
BLADE ROLLERS™, SAW HANDLE™
PRO SAWS & EQUIPMENT ................ 80 TILE SAWS, CO-ACTION™ SAW, RAIL SAW, BRICK/MASONRY SAWS, GAS POWERED CONCRETE SAWS, CORE DRILL RIGS, FLOOR GRINDERS, FLOOR SCRAPERS
Walk Behind Pneumatic Saw - Low HP Orbital Sander
Wet Polisher
Pedestal Grinder Bench Wheel
Floor Buffer
Sandpaper Sheets
Drill Press
ACCESSORIES .................................. 94 ROTO-WEDGE™ SPACERS, TUSCAN LEVELING SYSTEM™
E X C I T I N G
NEW
ABRASIVE PRODUCTS P4™ MULTI-CUT RESCUE/ UTILITY BLADE EXCELLENT FOR METAL STUDS AND DUCTILE IRON!
6" ZIRCONIA GREENBACK™ MAXIDISC™ FLAP DISC
T-29 PT. NUMBER
SPECS
MAX6040ZG MAX6060ZG MAX6080ZG
6 x 7/8 6 x 7/8 6 x 7/8
GRIT
MAX RPM PCS/BOX
Z40 Z60 Z80
10,200 10,200 10,200
10 10 10
Z40 Z60 Z80
10,200 10,200 10,200
10 10 10
WITH 5/8-11 THREAD
MAX6040ZGQ 6 x 5/8-11 MAX6060ZGQ 6 x 5/8-11 MAX6080ZGQ 6 x 5/8-11
PROVIDES UP TO 100X MORE LIFE THAN TRADITIONAL ABRASIVE WHEELS WHEN CUTTING METALS!
6" ZIRCONIA SILVER LINE™ MAXIDISC™ FLAP DISC
T-27 PT. NUMBER
SPECS
GRIT
MX6040ZT MX640ZTH MX6060ZT MX660ZTH MX6080ZT MX680ZTH MX6120ZT MX6120ZTH
6 x 7/8 6 x 5/8-11 6 x 7/8 6 x 5/8-11 6 x 7/8 6 x 5/8-11 6 x 7/8 6 x 5/8-11
Z40 Z40 Z60 Z60 Z80 Z80 Z120 Z120
MAX RPM PCS/BOX
10,200 10,200 10,200 10,200 10,200 10,200 10,200 10,200
10 10 10 10 10 10 10 10
BENEFITS: - EXTRA LONG LIFE - FAST CLEAN CUT - 12" TO 16" BLADES HAVE DIAMOND ELECTROPLATED SIDE PROTECTION WHICH PROTECTS THE CORE, REDUCES HEAT AND PREVENTS BINDING - VACUUM BRAZED TECHNOLOGY FUSED TO STEEL CORE FOR PROTECTION, DURABILITY AND HEAT RESISTANCE - DESIGNED TO BE USED ON A VARIETY OF MATERIALS - EXCELLENT FOR EMERGENCY SITUATIONS - DRY CUTTING PT. NUMBER
SPECS
MAX RPM
DIA045MC DIA005MC DIA007MC DIA012MC DIA014MC DIA016MC
4-1/2 x .080 x 7/8, 5/8 5 x .080 x 7/8, 5/8 7 x .095 x 7/8, ◊, 5/8 12 x .125 x 1, 20mm w/ side protection 14 x .125 x 1, 20mm w/ side protection 16 x .125 x 1, 20mm w/ side protection
13,000 12,000 8,730 6,115 5,500 3,820
For Metal Studs, Ductile Iron, Concrete, Asphalt, Masonry, Steel, Stainless Steel, Aluminum, Stucco, Tile Backer Board, Roof Tile, Corrugated Roofing, PVC, Plastic, Wood, Pipe, Dry Wall, Rebar. VBT™ VACUUM BRAZED TECHNOLOGY VBT™ allows for more diamond particles to be exposed on the core. This exposure produces the aggressive cutting action.
4
T-27 ZIRCONIA FATMAX™ MAXIDISC™ FLAP DISC
T-27 PT. NUMBER
SPECS
GRIT
MAX4540ZJ7 MAX4540ZJ7H MAX4560ZJ7 MAX4560ZJ7H MAX4580ZJ7 MAX4580ZJ7H MAX45120ZJ7 MAX45120ZJ7H MAX5040ZJ7 MAX5040ZJ7H MAX5060ZJ7 MAX5060ZJ7H MAX5080ZJ7 MAX5080ZJ7H MAX5120ZJ7 MAX5120ZJ7H
4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11
Z40 Z40 Z60 Z60 Z80 Z80 Z120 Z120 Z40 Z40 Z60 Z60 Z80 Z80 Z120 Z120
MAX RPM PCS/BOX
13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
CARBIDE BURS
TC-1000™ TITANIUM CARBIDE TIP BLADE
Pearl Abrasive Co. offers a new line of tungsten carbide burs in the most popular shapes and sizes. Pearl supplies both Double Cut carbide burs for ferrous metal as well as the Aluminum Cut for non-ferrous metals. - PRECISION GROUND TUNGSTEN CARBIDE FOR AGGRESSIVE CUTTING AND LONG LIFE • DOUBLE CUT ALLOWS FOR SMOOTH OPERATION WITH LITTLE OR NO VIBRATION • IDEAL FOR SMALLER, HARD-TO-REACH AREAS • EXCELLENT FOR WELD DRESSING, SMOOTHING CASTINGS AND SHAPING HOLES • 1/4" SHANK
DOUBLE CUT The most popular bur for ferrous materials. The flutes are precision ground in both left and right directions, offering aggressive stock removal and a smooth finish.
Pearl’s Titanium Carbide Tip Metal blade (TC-1000™) is designed to cut a variety of mild ferrous metals with fewer burs, less dust and reduced material burning than abrasive products. It provides much longer life than traditional abrasive wheels. The Pearl TC-1000™ is engineered with a triple chip design for added durability.
CARBIDE TIP
PT. NUMBER
SPECS
CBSA1P CBSA3P CBSA5P CBSB5P CBSC3P CBSC5P CBSD1P CBSD3P CBSD5P CBSE3P CBSE5P CBSF1P CBSF3P CBSF5P CBSG3P CBSL4P CBKITP
1/4 x 3/4 x 1/4 SA1 32,000 3/8 x 3/4 x 1/4 SA3 19,000 1/2 x 1 x 1/4 SA5 16,000 1/2 x 1 x 1/4 SB5 16,000 3/8 x 3/4 x 1/4 SC3 19,000 1/2 x 1 x 1/4 SC5 16,000 1/4 x 7/32 x 1/4 SD1 32,000 3/8 x 5/16 x 1/4 SD3 19,000 1/2 x 7/16 x 1/4 SD5 16,000 3/8 x 5/8 x 1/4 SE3 19,000 1/2 x 7/8 x 1/4 SE5 16,000 1/4 x 3/4 x 1/4 SF1 32,000 3/8 x 3/4 x 1/4 SF3 19,000 1/2 x 1 x 1/4 SF5 16,000 3/8 x 3/4 x 1/4 SG3 19,000 1/2 x 1-1/8 x 1/4 SL4 16,000 (8) Incl: SA5, SC3, SC5, SD5, SF3, SF5, SG3 and SL4
TYPE
MAX RPM
For Ferrous Metals, Iron, Steel, Stainless Steel, Other High Tensile Alloys.
ALUMINUM CUT
BENEFITS: - TITANIUM CARBIDE FOR EXTRA LONG LIFE - MINIMAL VIBRATION - TRIPLE CHIP DESIGN FOR ADDED DURABILITY - DESIGNED TO BE USED ON A VARIETY OF FERROUS MATERIALS - CUTS CLEAN AND COOL - ABLE TO BE RE-SHARPENED PT. NUMBER
SPECS
TC007M TC725M TC008M TC009M TC014M
7 x 20mm 7-1/4 x ◊, 5/8 8 x 5/8 9x1 14 x 1
NO. OF TEETH
MAX RPM
36 48 50 48 80
3,500 5,800 5,000 2,700 1,500
For Ferrous Metal, Angle Iron, Conduit, Metal Studs, Pipe, Aluminum, Plastic.
The Aluminum Cut is designed to be used on Non-Ferrous metals and has an open cut for aggressive stock removal, as well as avoids loading of material on softer metals. PT. NUMBER
SPECS
CBSA3ALP CBSA5ALP CBSC3ALP CBSD5ALP CBSE5ALP CBSF3ALP CBSF5ALP CBSL5ALP
3/8 x 3/4 x 1/4 1/2 x 1 x 1/4 3/8 x 3/4 x 1/4 1/2 x 7/16 x 1/4 1/2 x 7/8 x 1/4 3/8 x 3/4 x 1/4 1/2 x 1 x 1/4 5/8 x 1-3/16 x 1/4
TYPE
SA3-AL SA5-AL SC3-AL SD5-AL SE5-AL SF3-AL SF5-AL SL5-AL
MAX RPM
35,000 30,000 35,000 30,000 30,000 35,000 30,000 22,000
For Non-Ferrous Metals, Aluminum, Brass, Copper, Magnesium, Soft Steel, Hard Rubber, Zinc Alloys.
5
ABRASIVES
DEPRESSED CENTER GRINDING WHEELS
DEPRESSED CENTER GRINDING WHEELS
METAL ALUMINUM OXIDE SILVER LINE™ METAL Ferrous Metals, Iron, Steel.
Pearl’s depressed center grinding wheels are especially well suited for grinding, weld dressing and deburring. Pearl depressed center wheels are engineered for aggressive stock removal and extra long life.
All wheels are fully reinforced
and meet or exceed US/Canada safety standards and specifications.
T-27 PT. NUMBER
DC4010T DC4003T DC4030T DC4510T DC4510TH DC5010T DC5010TH DC6020T DC6020TH DC7020T DC7020TH DC9020T DC9020TH
SPECS
GRIT
MAX RPM PCS/BOX
4 x 5/32 x 5/8 4 x 1/4 x 3/8 4 x 1/4 x 5/8 4-1/2 x 1/4 x 7/8 4-1/2 x 1/4 x 5/8-11 5 x 1/4 x 7/8 5 x 1/4 x 5/8-11 6 x 1/4 x 7/8 6 x 1/4 x 5/8-11 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11
A24R A24R A24R A24R A24R A24R A24R A24R A24R A24S A24S A24S A24S
13,700 13,700 13,700 13,300 13,300 12,000 12,000 10,200 10,200 8,500 8,500 6,500 6,500
25 25 25 25 10 25 10 10 10 10 10 10 10
FOR PIPELINE DC4505T 4-1/2 x 1/8 x 7/8 DC4505TH 4-1/2 x 1/8 x 5/8-11 DC5005T 5 x 1/8 x 7/8 DC5005TH 5 x 1/8 x 5/8-11 DC701PT 7 x 1/8 x 7/8 DC701PTH 7 x 1/8 x 5/8-11 DC901PT 9 x 1/8 x 7/8 DC901PTH 9 x 1/8 x 5/8-11
A24R A24R A24R A24R A24S A24S A24S A24S
13,300 13,300 12,000 12,000 8,500 8,500 6,500 6,500
25 10 25 10 10 10 10 10
T-27
6
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
ABRASIVES
DEPRESSED CENTER GRINDING WHEELS
METAL
METAL
ALUMINUM OXIDE PREMIUM
ALUMINUM OXIDE REDLINE™ MAX-A.O.™
METAL
METAL
Ferrous Metals, Iron, Steel.
Ferrous Metals, Iron, Steel and Stainless Steel.
T-27 PT. NUMBER
DC4010 DC4020 DC4030 DC4040 DC4510 DC4510H DC5010 DC5010H DC7020 DC7020H DC9020 DC9020H
T-27 SPECS
4 x 5/32 x 5/8 4 x 5/32 x 5/8 4 x 1/4 x 5/8 4 x 1/4 x 5/8 4-1/2 x 1/4 x 7/8 4-1/2 x 1/4 x 5/8-11 5 x 1/4 x 7/8 5 x 1/4 x 5/8-11 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11
GRIT
A24R A36R A24R A36R A24R A24R A24R A24R A24S A24S A24S A24S
MAX RPM PCS/BOX
13,700 13,700 13,700 13,700 13,300 13,300 12,000 12,000 8,500 8,500 6,500 6,500
25 25 25 25 25 10 25 10 10 10 10 10
PT. NUMBER
DCRED40 DCRED45 DCRED45H DCRED50 DCRED50H DCRED60 DCRED60H DCRED70 DCRED70H DCRED90 DCRED90H
SPECS
GRIT
MAX RPM PCS/BOX
4 x 1/4 x 5/8 4-1/2 x 1/4 x 7/8 4-1/2 x 1/4 x 5/8-11 5 x 1/4 x 7/8 5 x 1/4 x 5/8-11 6 x 1/4 x 7/8 6 x 1/4 x 5/8-11 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11
A/WA24R A/WA24R A/WA24R A/WA24R A/WA24R A/WA24R A/WA24R A/WA24S A/WA24S A/WA24S A/WA24S
13,700 13,300 13,300 12,000 12,000 10,200 10,200 8,500 8,500 6,500 6,500
25 25 10 25 10 10 10 10 10 10 10
FOR PIPELINE DCRED45P 4-1/2 x 1/8 x 7/8 DCRED45PH 4-1/2 x 1/8 x 5/8-11 DCRED50P 5 x 1/8 x 7/8 DCRED50PH 5 x 1/8 x 5/8-11 DCRED60P 6 x 1/8 x 7/8 DCRED60PH 6 x 1/8 x 5/8-11 DCRED70P 7 x 1/8 x 7/8 DCRED70PH 7 x 1/8 x 5/8-11 DCRED90P 9 x 1/8 x 7/8 DCRED90PH 9 x 1/8 x 5/8-11
A/WA30S A/WA30S A/WA30S A/WA30S A/WA30R A/WA30R A/WA30S A/WA30S A/WA30S A/WA30S
13,300 13,300 12,000 12,000 10,200 10,200 8,500 8,500 6,500 6,500
25 10 25 10 10 10 10 10 10 10
T-27 T-27 FOR PIPELINE DC4505 4-1/2 x 1/8 x 7/8 DC4505H 4-1/2 x 1/8 x 5/8-11 DC5005 5 x 1/8 x 7/8 DC5005H 5 x 1/8 x 5/8-11 DC701P 7 x 1/8 x 7/8 DC701PH 7 x 1/8 x 5/8-11 DC901P 9 x 1/8 x 7/8 DC901PH 9 x 1/8 x 5/8-11
A24R A24R A24R A24R A24S A24S A24S A24S
13,300 13,300 12,000 12,000 8,500 8,500 6,500 6,500
25 10 25 10 10 10 10 10
T-28 DC704C DC704CH DC904C DC904CH
7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11
A24S A24S A24S A24S
8,500 8,500 6,500 6,500
10 10 10 10
REUSABLE ADAPTER FOR DEPRESSED CENTER WHEEL PART NO.
HUBKIT
SIZE
5/8-11
7
DEPRESSED CENTER GRINDING WHEELS
ABRASIVES
REDLINE™ MAX A.O. DEPRESSED CENTER GRINDING WHEEL
33% MORE EFFICIENT THAN STANDARD ALUMINUM OXIDE! Pearl’s innovative MAX A.O. super grain is highly efficient MAX A.O. is a hybrid grain mixture with unique crystalline properties that enable individual grain particles to remain extremely sharp and durable. The MAX A.O. grain has excellent friability characteristics that allow for optimally-timed fracturing of abrasive crystals, constantly exposing sharp cutting edges to the work surface. The result is significantly increased efficiency and performance when compared to traditional aluminum oxide wheels.
Less vibration The Redline™ MAX A.O. wheel’s combination of a proprietary bonding system and the MAX A.O. grain create a wheel that offers near perfect balance, with significantly less vibration or “wheel chatter.” This is extremely helpful in improving grinding efficiency and grinding speed. It is also very helpful in making the wheel user friendly, decreasing both operator fatigue and wear on the angle grinder.
Cooler grinding Because the Redline™ MAX A.O. wheel runs significantly cooler than standard grinding wheels, it is ideal for applications in which burning the material can be a problem. The MAX A.O. wheel dissipates heat better than standard aluminum oxide grinding wheels, resulting in increased performance and less chance of marring the workpiece.
Non-loading The multiple cutting edges of the MAX A.O. grain combined with the enhanced resin mixture result in stock removal rates that are significantly higher than standard grinding wheels. In addition, the constant renewal of fresh cutting edges greatly decreases wheel loading, ensuring consistent performance.
Increased grinding efficiency YOUR TIME IS VALUABLE! Manufacturers are constantly searching for ways of increasing productivity and are using efficiency ratings and production output to judge the effectiveness of abrasive products. The Pearl Redline™ MAX A.O. wheel has been designed with cutting efficiency in mind, providing greater productivity for the operator.
8
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
ABRASIVES
DEPRESSED CENTER GRINDING WHEELS
METAL/STAINLESS STEEL
METAL/STAINLESS STEEL
SRT™ CONTAMINANT FREE
ZIRCONIA
Fe + S + Cl <0.1%
METAL/STAINLESS STEEL
METAL/STAINLESS STEEL
Ferrous Metals, Iron, Steel and Other High Tensile Alloys.
Ferrous Metals, Iron, Steel and Stainless Steel.
T-27
T-27
PT. NUMBER
SPECS
DCSRT40 DCSRT45 DCSRT45H DCSRT50 DCSRT50H DCSRT70 DCSRT70H DCSRT90 DCSRT90H
4 x 1/4 x 5/8 4-1/2 x 1/4 x 7/8 4-1/2 x 1/4 x 5/8-11 5 x 1/4 x 7/8 5 x 1/4 x 5/8-11 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11
GRIT
SRT24 SRT24 SRT24 SRT24 SRT24 SRT24 SRT24 SRT24 SRT24
MAX RPM PCS/BOX
13,700 13,300 13,300 12,000 12,000 8,500 8,500 6,500 6,500
25 25 10 25 10 10 10 10 10
PT. NUMBER
SPECS
GRIT
DC4030Z DC4510Z DC4510ZH DC5010Z DC5010ZH DC703Z DC703ZH DC903Z DC903ZH
4 x 1/4 x 5/8 4-1/2 x 1/4 x 7/8 4-1/2 x 1/4 x 5/8-11 5 x 1/4 x 7/8 5 x 1/4 x 5/8-11 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11
Z24T Z24T Z24T Z24T Z24T Z24T Z24T Z24T Z24T
MAX RPM PCS/BOX
13,700 13,300 13,300 12,000 12,000 8,500 8,500 6,500 6,500
25 25 10 25 10 10 10 10 10
FOR PIPELINE DC4505Z 4-1/2 x 1/8 x 7/8 DC4505ZH 4-1/2 x 1/8 x 5/8-11 DC5005Z 5 x 1/8 x 7/8 DC5005ZH 5 x 1/8 x 5/8-11 DC701PZ 7 x 1/8 x 7/8 DC701PZH 7 x 1/8 x 5/8-11 DC901PZ 9 x 1/8 x 7/8 DC901PZH 9 x 1/8 x 5/8-11
Z24T Z24T Z24T Z24T Z24T Z24T Z24T Z24T
13,300 13,300 12,000 12,000 8,500 8,500 6,500 6,500
25 10 25 10 10 10 10 10
GRIT
MAX RPM PCS/BOX
T-27
MASONRY
ALUMINUM
SILICON CARBIDE PREMIUM
D.A. SERIES
MASONRY
ALUMINUM
Concrete, Stone, Cast Iron and Non-Ferrous Metals.
Soft Non-Ferrous Metals, Copper, Brass, Bronze etc.
T-27
T-27
PT. NUMBER
SPECS
GRIT
DM4030 DM4510 DM4510H DM5010 DM5010H DM7010 DM7010H DM9010 DM9010H
4 x 1/4 x 5/8 4-1/2 x 1/4 x 7/8 4-1/2 x 1/4 x 5/8-11 5 x 1/4 x 7/8 5 x 1/4 x 5/8-11 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11
C24S C24S C24S C24S C24S C24S C24S C24S C24S
MAX RPM PCS/BOX
13,700 13,300 13,300 12,000 12,000 8,500 8,500 6,500 6,500
25 25 10 25 10 10 10 10 10
PT. NUMBER
SPECS
DA4030 DA4510 DA4510H DA5010 DA5010H DA7020 DA7020H
4 x 1/4 x 5/8 4-1/2 x 1/4 x 7/8 4-1/2 x 1/4 x 5/8-11 5 x 1/4 x 7/8 5 x 1/4 x 5/8-11 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11
AL24M AL24M AL24M AL24M AL24M AL24M AL24M
13,700 13,300 13,300 12,000 12,000 8,500 8,500
25 25 10 25 10 10 10
9
ABRASIVES
FLEXIBLE GRINDING WHEELS
FLEXIBLE GRINDING WHEELS
GRINDING, SHAPING, FINISHING OR SANDING... ONE WHEEL DOES IT ALL! Pearl Abrasive flexible grinding wheels combine the benefits of depressed center grinding wheels, resin fiber discs (sanding discs) and flap discs into one revolutionary product.
FLEXIBILITY INCREASES GRINDING SURFACE
Flexible wheels are extremely versatile Pearl flexible grinding wheels combine the benefits of traditional fiber discs, grinding wheels and flap discs to produce a product that is truly versatile and capable of meeting all your grinding, shaping, finishing or sanding needs.
Increase grinding surface area Because of their flexibility, there is more wheel surface on the material being ground, making for faster grinding efficiency.
Superior surface finish When a smooth finish is important and contours and corners have to be blended, flexible wheels get the job done.
Less vibration A flexible grinding wheel absorbs vibration resulting in less fatigue and downtime.
Exclusive non-woven reinforcement Pearl Abrasive flexible wheels are double-reinforced with a top layer of non-woven fabric and an internal layer of reinforcing cloth. This adds the element of safety and stability to the wheel.
10
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
ABRASIVES
FLEXIBLE GRINDING WHEELS
FLEXIBLE GRINDING WHEELS METAL/STAINLESS STEEL METAL
SRT™
ALUMINUM OXIDE
CONTAMINANT FREE Fe + S + Cl <0.1%
METAL
METAL/STAINLESS STEEL
Ferrous Metals, Iron, Steel and Stainless Steel.
Ferrous Metals, Iron, Steel and Other High Tensile Alloys.
T-27
T-27
PT. NUMBER
SPECS
FAC4036 FAC4046 FAC4060 FAC4080 FAC4120 FAC4536 FAC4536H FAC4546 FAC4546H FAC4560 FAC4560H FAC4580 FAC4580H FAC5036 FAC5036H FAC5046 FAC5046H FAC5060 FAC5060H FAC5080 FAC5080H FAC7024 FAC7024H FAC7036 FAC7036H FAC7046 FAC7046H FAC7060 FAC7060H FAC7080 FAC7080H FAC7120 FAC7120H FAC9036 FAC9036H FAC9046 FAC9046H FAC9060 FAC9060H
4 x 1/8 x 5/8 4 x 1/8 x 5/8 4 x 1/8 x 5/8 4 x 1/8 x 5/8 4 x 1/8 x 5/8 4-1/2 x 1/8 x 7/8 4-1/2 x 1/8 x 5/8-11 4-1/2 x 1/8 x 7/8 4-1/2 x 1/8 x 5/8-11 4-1/2 x 1/8 x 7/8 4-1/2 x 1/8 x 5/8-11 4-1/2 x 1/8 x 7/8 4-1/2 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 9 x 1/8 x 7/8 9 x 1/8 x 5/8-11 9 x 1/8 x 7/8 9 x 1/8 x 5/8-11 9 x 1/8 x 7/8 9 x 1/8 x 5/8-11
GRIT
AC36 AC46 AC60 AC80 AC120 AC36 AC36 AC46 AC46 AC60 AC60 AC80 AC80 AC36 AC36 AC46 AC46 AC60 AC60 AC80 AC80 AC24 AC24 AC36 AC36 AC46 AC46 AC60 AC60 AC80 AC80 AC120 AC120 AC36 AC36 AC46 AC46 AC60 AC60
MAX RPM PCS/BOX
13,700 13,700 13,700 13,700 13,700 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 6,500 6,500 6,500 6,500 6,500 6,500
25 25 25 25 25 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
PT. NUMBER
SPECS
FLEX4036 FLEX4046 FLEX4060 FLEX4080 FLEX4120 FLEX4536 FLEX453H FLEX4546 FLEX454H FLEX4560 FLEX456H FLEX4580 FLEX458H FLEX4512 FLEX451H FLEX5036 FLEX5036H FLEX5046 FLEX5046H FLEX5060 FLEX5060H FLEX5080 FLEX5080H FLEX5120 FLEX5120H FLEX7036 FLEX736H FLEX7046 FLEX746H FLEX7060 FLEX760H FLEX7080 FLEX780H FLEX7120 FLEX712H
4 x 1/8 x 5/8 4 x 1/8 x 5/8 4 x 1/8 x 5/8 4 x 1/8 x 5/8 4 x 1/8 x 5/8 4-1/2 x 1/8 x 7/8 4-1/2 x 1/8 x 5/8-11 4-1/2 x 1/8 x 7/8 4-1/2 x 1/8 x 5/8-11 4-1/2 x 1/8 x 7/8 4-1/2 x 1/8 x 5/8-11 4-1/2 x 1/8 x 7/8 4-1/2 x 1/8 x 5/8-11 4-1/2 x 1/8 x 7/8 4-1/2 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 5 x 1/8 x 7/8 5 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11
GRIT
SRT 36 SRT 46 SRT 60 SRT 80 SRT 120 SRT 36 SRT 36 SRT 46 SRT 46 SRT 60 SRT 60 SRT 80 SRT 80 SRT 120 SRT 120 SRT 36 SRT 36 SRT 46 SRT 46 SRT 60 SRT 60 SRT 80 SRT 80 SRT 120 SRT 120 SRT 36 SRT 36 SRT 46 SRT 46 SRT 60 SRT 60 SRT 80 SRT 80 SRT 120 SRT 120
MAX RPM PCS/BOX
13,700 13,700 13,700 13,700 13,700 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500
25/200 25/200 25/200 25/200 25/200 25/200 10 25/200 10 25/200 10 25/200 10 25/200 10 25 10 25 10 25 10 25 10 25 10 10 10 10 10 10 10 10 10 10 10
11
FLEXIBLE GRINDING WHEELS FLEXIBLE GRINDING WHEELS/T-11 GRINDING CUP STONES
ALUMINUM & STONE
ABRASIVES
PLASTIC BACKUP PADS FOR FLEX WHEELS
SILICON CARBIDE ALUMINUM & STONE Concrete, Stone, Cast Iron and Non-Ferrous Metals.
T-27 PT. NUMBER
SPECS
GRIT
FCC7036 FCC7036H FCC7046 FCC7046H
7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11
CC36 CC36 CC46 CC46
MAX RPM PCS/BOX
8,500 8,500 8,500 8,500
10 10 10 10
PART NO.
SPECS
FPD40 FPD50 FPD70 FPD90
2-1/2 for 4" wheels 3-3/8 for 4-1/2" & 5" wheels 4-3/8 for 7" wheels 5-3/4 for 9" wheels
MAX RPM
13,700 13,300 8,500 6,500
TYPE 11 GRINDING CUP STONE Pearl Abrasive Co.’s maximum value Type 11 Cup Stones were developed for both grinding performance and quality. Pearl’s Cup Stones utilize the highest quality abrasive grain and resin bond to ensure that the stone will withstand the toughest grinding applications.
METAL
CONCRETE
ALUMINUM OXIDE
SILICON CARBIDE CONCRETE Stone, Cast Iron and NonFerrous Metals.
METAL Ferrous Metals, Iron, Steel.
T-11
T-11
12
PT. NUMBER
SPECS
CSA416 CSA516 CSA616
4 x 2 x 5/8-11 5 x 2 x 5/8-11 6 x 2 x 5/8-11
GRIT
A16Q A16Q A16Q
MAX RPM PCS/BOX
9,000 7,200 6,000
10 10 10
PT. NUMBER
SPECS
CSC416 CSC516 CSC616
4 x 2 x 5/8-11 5 x 2 x 5/8-11 6 x 2 x 5/8-11
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
GRIT
C16Q C16Q C16Q
MAX RPM PCS/BOX
9,000 7,200 6,000
10 10 10
ABRASIVES
MAXIDISC™ - FLAP DISCS
GREENBACK™ ZIRCONIA MAXIDISC™ - TRIMMABLE DISCS
EASY TRIM BACKING SAVES TIME AND MONEY! Greenback’s™ nylon Easy Trim backing allows you to shave off the green backing as the flaps wear down exposing more flap length. This translates into fewer wheel changes, saving you down time thus reducing your product usage and labor cost.
Non-warping nylon back Reinforced with fiberglass, gives the Greenback™ flap disc more strength and durability than the competitions plastic back even under the most severe conditions.
Combination polyester/cotton flap The best zirconia grains, on a special combination polyester/cotton flap, hold the grain more securely and resist clogging.
Less vibrations Polyester/cotton flaps cushion the backing thus reducing vibration and noise.
Easy grit identification Never wonder what grit you are putting on your grinder. Even after extensive use you can still identify the grit.
Runs cooler Exclusive outer coating, over the best premium Zirconia grains available, make the Pearl Abrasive Greenback™ Maxidisc™ flap disc run cooler and last longer as well as providing lubrication to prevent burn marks and discoloration of the finished material.
Available with 5/8-11 thread
13
APPLICATIONS
RADIAL FLAP DISC
the pearl maxidisc system
Pearl Abrasive offers an assortment of Maxidiscs™ for specific applications on a variety of materials. • Stainless Steel • Carbon Steel • Sheet Metal • Iron • High Tensile Alloys • Food and Dairy Equipment
CHOOSE YOUR APPLICATIONS GENERAL USES
™
CHOOSE THE MAXIDISC™ THAT IS RIGHT FOR YOU!
ABRASIVE MATERIALS • Pearl Abrasive uses only the best abrasive grains and backing material for our Maxidiscs™. • We only use 100% polyester or a combination of polyester/ cotton, NEVER PAPER. • Pearl’s unique way of embedding the grains to a durable polyester or polyester/cotton backing results in a construction that provides superior performance and life.
1. APPLICATIONS
CHOOSE THE GRAIN Choose the grain type specific to the job, meaning the material that is being worked on, in order to have the best outcome. Each abrasive grain has a specific fracturing characteristic making it useful for grinding operations on specific materials. As the disc comes in contact with the work piece the surface grains wear away exposing new sharper grains. This constant fracturing away produces the finished product.
MATCH THE GRIT TO YOUR APPLICATION
2. ABRASIVE MATERIALS 3. DISC CONFIGURATIONS 4. HUB BACKING TYPES When choosing a Maxidisc™ there are a number of things that you need to consider. The grain type for the job application, the abrasive material and shape used in the manufacturing of the Maxidisc™. Pearl Abrasive uses only top quality grains and backing materials.
DISC CONFIGURATIONS
CHOOSE YOUR FLEXIBILITY
Pearl Abrasive offers a variety of flap configurations for specific applications. Variables to consider in overall flap configuration are: • Flap Angle - For flexibility. • Disc Shape - For aggressiveness.
CHOOSE YOUR SHAPE
HUB BACKING TYPES
14
CHOOSE YOUR HUB BACKING
• POLISHING • GRINDING • STOCK REMOVAL
• WELD BLENDING • CLEANING • FINISHING
• EDGE CHAMFERING • BURR REMOVAL • SANDING
• Building construction • Air ducts • Food equipment fabrication • Stainless steel fabrication • Liquid storage tank fabricators
• Mold and die polishing • Elevator manufacturers • Fiberglass boat building/repair • Sheet metal fabricators • Bridge builders
• Paint removal • Railroad car builders • Enclosure manufacturers • Construction equipment sales/repair • Propeller manufacturers
ALUMINUM OXIDE
ZIRCONIA
Premium Blue-fired, Friable Aluminum Oxide with active grinding agent. The wedge shape of this tough grain is made for long life and stock removal. The cutting edges work great for grinding and cutting: • Ferrous metals. • Iron. • Steel.
100% Zirconia with active grinding agent.
24
36
A very hard and sharp abrasive grain that allows for very fast stock removal and at the same time runs cool. Silicon carbide grains work well with very light pressure. This grain is made to work well on:
• Stone, concrete, marble and granite. • Non-ferrous metals such as aluminum, bronze as well as glass.
COARSE FINISH 40
60
80
• Fire sprinkler manufacturers • Dairy equipment manufacturers • Truck and car body fabrication • Ornamental iron shops • Aircraft manufacturers
ZIRCONIA FOR STAINLESS STEEL
Manufactured crystalline compound with active grinding agent.
This extremely tough and sharp gain is made for high stock removal. Long life and cool running are characteristics of the high performance grain. Its constant selfsharpening edges work well on: • Ferrous metals. • Stainless steel. • Other high tensile alloys.
COARSE GRINDING GRIT
SILICON CARBIDE
• DEFLASHING • PAINT REMOVAL
MEDIUM FINISH 100
120
Proprietary zirconia with special active grinding agent. This special grain was developed for superior work on stainless steel. The mixture of zirconia and aluminum oxide was developed to avoid overheating, glazing and discoloration. It has exceptional stock removal properties. • Stainless steel.
FINISH
150
180
220
FINE FINISH
320
400
600
Removal of heavy duty welding bead Grinding on structural steel Removal of imperfections Rust removal and surface preparation Mold and die polishing Removal of burr and flash Blending Clean Finish
LESS FLEXIBILITY
STOCK REMOVAL/GRINDING
Discs with less flexibility are designed for aggressive stock removal. Discs with low flexibility are excellent for grinding where a lot of material needs to be removed.
TYPE 29
Use Type 29 Maxidiscs™ for the maximum aggressiveness and full use of each flap when grinding at an angle.
TRIMMABLE
HIGH FLEXIBILITY
SANDING/BLENDING
Discs with high flexibility are designed for light grinding, sanding, blending, and finishing. Highly flexible discs are also ideal for increased flexibility when working on uneven or curved surfaces.
TYPE 27
Use Type 27 Maxidiscs™ for smooth grinding, blending and increased flexibility.
NON-TRIMMABLE
15
ABRASIVES
MAXIDISC™ - RADIAL FLAP DISCS RADIAL FLAP DISC
the pearl maxidisc system ™
CHOOSE THE MAXIDISC™ THAT IS RIGHT FOR YOU!
METAL
METAL
ALUMINUM OXIDE SILVER LINE™
ALUMINUM OXIDE PREMIUM
T-27
100% COTTON
50% POLYESTER 50% COTTON
T-27
100% COTTON
T-27
T-27
16
100% POLYESTER
SHAPE
SHAPE 50% POLYESTER 50% COTTON
FLEXIBILITY
100% POLYESTER
BACKING
Ferrous Metals, Iron, Steel, Aluminum, Non-Ferrous Metals.
FLEXIBILITY
METAL
Ferrous Metals, Iron, Steel, Aluminum, Non-Ferrous Metals. BACKING
METAL
PT. NUMBER
SPECS
GRIT
MX4040T MX4060T MX4080T MX4120T MX4540T MX4540TH MX4560T MX4560TH MX4580T MX4580TH MX45120T MX4512TH MX5040T MX5040TH MX5060T MX5060TH MX5080T MX5080TH MX5120T MX5120TH MX7040T MX7040TH MX7060T MX7060TH MX7080T MX7080TH MX7120T MX7120TH
4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11
A40 A60 A80 A120 A40 A40 A60 A60 A80 A80 A120 A120 A40 A40 A60 A60 A80 A80 A120 A120 A40 A40 A60 A60 A80 A80 A120 A120
MAX RPM PCS/BOX
15,300 15,300 15,300 15,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
PT. NUMBER
SPECS
GRIT
MAX4040 MAX4060 MAX4080 MAX4100 MAX4120 MAX4540 MAX4540H MAX4560 MAX4560H MAX4580 MAX4580H MAX45100 MAX4510H MAX45120 MAX4512H MAX5040 MAX5040H MAX5060 MAX5060H MAX5080 MAX5080H MAX5100 MAX5100H MAX5120 MAX5120H MAX7040 MAX7040H MAX7060 MAX7060H MAX7080 MAX7080H
4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11
A40 A60 A80 A100 A120 A40 A40 A60 A60 A80 A80 A100 A100 A120 A120 A40 A40 A60 A60 A80 A80 A100 A100 A120 A120 A40 A40 A60 A60 A80 A80
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
MAX RPM PCS/BOX
15,300 15,300 15,300 15,300 15,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 8,600 8,600 8,600 8,600 8,600 8,600
10/100 10/100 10/100 10/100 10/100 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10
MAXIDISC™ - FLAP DISCS MAXIDISC™ - RADIAL FLAP DISCS
ABRASIVES
RADIAL FLAP DISC
the pearl maxidisc system ™
CHOOSE THE MAXIDISC™ THAT IS RIGHT FOR YOU!
STONE/GLASS
METAL
SILICON CARBIDE
ALUMINUM OXIDE CLASSIC™
STONE/GLASS
METAL
50% POLYESTER 50% COTTON
T-27
100% COTTON
100% POLYESTER
SHAPE
BACKING
SHAPE
FLEXIBILITY
BACKING
100% POLYESTER
FLEXIBILITY
Marble, Granite, Stone, Glass, Cast Iron, Non-Ferrous Metals.
Ferrous Metals, Iron, Steel.
50% POLYESTER 50% COTTON
100% COTTON
T-27
T-27
T-27 PT. NUMBER
SPECS
GRIT
MAX4040K MAX4060K MAX4080K MAX4100K MAX4540K MAX4540KH MAX4560K MAX4560KH MAX4580K MAX4580KH MAX45100K MAX4510KH
4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11
A40 A60 A80 A100 A40 A40 A60 A60 A80 A80 A100 A100
MAX RPM PCS/BOX
13,700 13,700 13,700 13,700 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000
PLASTIC BACKUP PADS FOR CLASSIC™ MAXIDISC™
PART NO.
SPECS
FPD40 FPD50 FPD70 FPD90
2-1/2 for 4" wheels 3-3/8 for 4-1/2" & 5" wheels 4-3/8 for 7" wheels 5-3/4 for 9" wheels
MAX RPM
13,700 13,300 8,500 6,500
10 10 10 10 10 10 10 10 10 10 10 10
PT. NUMBER
SPECS
GRIT
MAX4080C MAX4120C MAX4240C MAX4320C MAX4400C MAX4600C MAX4580C MX4580CH MAX4512C MX4512CH MAX4524C MX4524CH MAX4532C MX4532CH MAX4540C MX4540CH MAX4560C MX4560CH MAX7080C MX7080CH MAX7120C MX7120CH MAX7240C MX7240CH MAX7320C MX7320CH MAX7400C MX7400CH MAX7600C MX7600CH
4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11
C80 C120 C240 C320 C400 C600 C80 C80 C120 C120 C240 C240 C320 C320 C400 C400 C600 C600 C80 C80 C120 C120 C240 C240 C320 C320 C400 C400 C600 C600
MAX RPM PCS/BOX
15,300 15,300 15,300 15,300 15,300 15,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600
10/100 10/100 10/100 10/100 10/100 10/100 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10
MAXIDISC™ ADAPTER PART NO.
SIZE
MAX5838
5/8 to 3/8, for 4" Maxidisc™
17
MAXIDISC™ - FLAP DISCS MAXIDISC™ - RADIAL FLAP DISCS
ABRASIVES
RADIAL FLAP DISC
the pearl maxidisc system ™
CHOOSE THE MAXIDISC™ THAT IS RIGHT FOR YOU!
METAL/STAINLESS STEEL ZIRCONIA SILVER LINE™ METAL/STAINLESS STEEL
50% POLYESTER 50% COTTON
SHAPE
FLEXIBILITY
100% POLYESTER
BACKING
Ferrous Metals, Iron, Steel, Stainless Steel.
T-27
100% COTTON
T-29
T-27 PT. NUMBER
MX4040ZT MX4060ZT MX4080ZT MX4120ZT MX4540ZT MX454ZTH MX4560ZT MX456ZTH MX4580ZT MX458ZTH MX45120ZT MX45120ZTH MX5040ZT MX540ZTH MX5060ZT MX560ZTH MX5080ZT MX580ZTH MX5120ZT MX5120ZTH NEW! MX6040ZT NEW! MX640ZTH NEW! MX6060ZT NEW! MX660ZTH NEW! MX6080ZT NEW! MX680ZTH NEW! MX6120ZT NEW! MX6120ZTH MX7040ZT MX740ZTH MX7060ZT MX760ZTH MX7080ZT MX780ZTH MX7120ZT MX7120ZTH
18
SPECS
GRIT
4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 6 x 7/8 6 x 5/8-11 6 x 7/8 6 x 5/8-11 6 x 7/8 6 x 5/8-11 6 x 7/8 6 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11
Z40 Z60 Z80 Z120 Z40 Z40 Z60 Z60 Z80 Z80 Z120 Z120 Z40 Z40 Z60 Z60 Z80 Z80 Z120 Z120 Z40 Z40 Z60 Z60 Z80 Z80 Z120 Z120 Z40 Z40 Z60 Z60 Z80 Z80 Z120 Z120
MAX RPM PCS/BOX
15,300 15,300 15,300 15,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200 10,200 10,200 10,200 10,200 10,200 10,200 10,200 10,200 8,600 8,600 8,600 8,600 8,600 8,600 8,600 8,600
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
T-29
MX454Z9T MX454Z9TH MX456Z9T MX456Z9TH MX458Z9T MX458Z9TH MX504Z9T MX504Z9TH MX506Z9T MX506Z9TH MX508Z9T MX508Z9TH MX704Z9T MX704Z9TH MX706Z9T MX706Z9TH MX708Z9T MX708Z9TH
4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
Z40 Z40 Z60 Z60 Z80 Z80 Z40 Z40 Z60 Z60 Z80 Z80 Z40 Z40 Z60 Z60 Z80 Z80
13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 8,600 8,600 8,600 8,600 8,600 8,600
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
MAXIDISC™ - FLAP DISCS MAXIDISC™ - RADIAL FLAP DISCS
ABRASIVES
RADIAL FLAP DISC
the pearl maxidisc system ™
CHOOSE THE MAXIDISC™ THAT IS RIGHT FOR YOU!
METAL/STAINLESS STEEL ZIRCONIA PREMIUM
T-29 100% POLYESTER
GRIT
PT. NUMBER
MAX RPM PCS/BOX
4 x 5/8 4 x 5/8 4 x 5/8 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11 7 x 7/8 7 x 5/8-11
Z40 Z60 Z80 Z60 Z60 Z80 Z80 Z40 Z40 Z60 Z60 Z80 Z80 Z40 Z40 Z60 Z60 Z80 Z80
15,300 15,300 15,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 8,600 8,600 8,600 8,600 8,600 8,600
10/100 10/100 10/100 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10 10/100 10
4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11
Z40 Z40 Z60 Z60 Z80 Z80
13,300 13,300 13,300 13,300 13,300 13,300
10 10 10 10 10 10
MAX4540ZG MAX4560ZG MAX4580ZG MAX45120ZG MAX5040ZG MAX5060ZG MAX5080ZG MAX5120ZG NEW! MAX6040ZG NEW! MAX6060ZG NEW! MAX6080ZG
SPECS
GRIT
4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 6 x 7/8 6 x 7/8 6 x 7/8
Z40 Z60 Z80 Z120 Z40 Z60 Z80 Z120 Z40 Z60 Z80
MAX RPM PCS/BOX
13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 10,200 10,200 10,200
10 10 10 10 10 10 10 10 10 10 10
WITH 5/8-11 THREAD
METAL/STAINLESS STEEL ZIRCONIA GREENBACK™ METAL/STAINLESS STEEL
Ferrous Metals, Iron, Steel, Stainless Steel, Hard Materials.
T-29
MAX4540Z9 MAX4540Z9H MAX4560Z9 MAX4560Z9H MAX4580Z9 MAX4580Z9H
TRIMMABLE
100% POLYESTER
50% POLYESTER 50% COTTON
SHAPE
SPECS
BACKING
MAX4040Z MAX4060Z MAX4080Z MAX4560Z MAX456ZH MAX4580Z MAX458ZH MAX5040Z MAX504ZH MAX5060Z MAX506ZH MAX5080Z MAX508ZH MAX7040Z MAX704ZH MAX7060Z MAX706ZH MAX7080Z MAX708ZH
T-29
100% COTTON
T-29
T-27 PT. NUMBER
50% POLYESTER 50% COTTON
SHAPE
T-27
FLEXIBILITY
100% COTTON
FLEXIBILITY
50% POLYESTER 50% COTTON
BACKING
Ferrous Metals, Iron, Steel, Stainless Steel, Hard Materials. SHAPE
METAL/STAINLESS STEEL
Ferrous Metals, Iron, Steel, Stainless Steel. FLEXIBILITY
METAL/STAINLESS STEEL
BACKING
100% POLYESTER
METAL/STAINLESS STEEL ZIRCONIA GREENBACK™
T-29
100% COTTON
TRIMMABLE
T-29 PT. NUMBER
MAX4540ZGQ MAX4560ZGQ MAX4580ZGQ MAX45120ZGQ MAX5040ZGQ MAX5060ZGQ MAX5080ZGQ MAX5120ZGQ NEW! MAX6040ZGQ NEW! MAX6060ZGQ NEW! MAX6080ZGQ
SPECS
GRIT
4-1/2 x 5/8-11 4-1/2 x 5/8-11 4-1/2 x 5/8-11 4-1/2 x 5/8-11 5 x 5/8-11 5 x 5/8-11 5 x 5/8-11 5 x 5/8-11 6 x 5/8-11 6 x 5/8-11 6 x 5/8-11
Z40 Z60 Z80 Z120 Z40 Z60 Z80 Z120 Z40 Z60 Z80
MAX RPM PCS/BOX
13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 10,200 10,200 10,200
10 10 10 10 10 10 10 10 10 10 10
19
ABRASIVES
MAXIDISC™ - RADIAL FLAP DISCS RADIAL FLAP DISC
the pearl maxidisc system ™
CHOOSE THE MAXIDISC™ THAT IS RIGHT FOR YOU!
METAL/STAINLESS STEEL ZIRCONIA FATMAX™ (JUMBO)
STAINLESS STEEL SPECIAL COAT ZIRCONIA STAINLESSMAX™ CONTAMINANT FREE Fe + S + Cl <0.1%
METAL/STAINLESS STEEL
- KEEPS MATERIAL COOL
T-29
T-27 GRIT
4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11
Z40 Z40 Z60 Z60 Z80 Z80 Z120 Z120 Z40 Z40 Z60 Z60 Z80 Z80 Z120 Z120
PT. NUMBER
SPECS
GRIT
MAX4540ZJ9 MAX4540ZJ9H MAX4560ZJ9 MAX4560ZJ9H MAX4580ZJ9 MAX4580ZJ9H MAX45120ZJ9 MAX45120ZJ9H MAX5040ZJ9 MAX5040ZJ9H MAX5060ZJ9 MAX5060ZJ9H MAX5080ZJ9 MAX5080ZJ9H MAX5120ZJ9 MAX5120ZJ9H
4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11
Z40 Z40 Z60 Z60 Z80 Z80 Z120 Z120 Z40 Z40 Z60 Z60 Z80 Z80 Z120 Z120
NEW! MAX4540ZJ7H NEW! MAX4560ZJ7 NEW! MAX4560ZJ7H NEW! MAX4580ZJ7 NEW! MAX4580ZJ7H NEW! MAX45120ZJ7 NEW! MAX45120ZJ7H NEW! MAX5040ZJ7 NEW! MAX5040ZJ7H NEW! MAX5060ZJ7 NEW! MAX5060ZJ7H NEW! MAX5080ZJ7 NEW! MAX5080ZJ7H NEW! MAX5120ZJ7 NEW! MAX5120ZJ7H
T-27
100% COTTON
MAX RPM PCS/BOX
13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200
T-27
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
T-29
20
50% POLYESTER 50% COTTON
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
SPECS
MAX4540ZS MAX4540ZSH MAX4560ZS MAX4560ZSH MAX4580ZS MAX4580ZSH MAX5040ZS MAX5040ZSH MAX5060ZS MAX5060ZSH MAX5080ZS MAX5080ZSH
4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11 5 x 7/8 5 x 5/8-11
GRIT
MAX RPM PCS/BOX
Z40 Z40 Z60 Z60 Z80 Z80 Z40 Z40 Z60 Z60 Z80 Z80
13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200
10 10 10 10 10 10 10 10 10 10 10 10
METAL/STAINLESS STEEL ZIRCONIA TUFF MAX™
MAX RPM PCS/BOX
13,300 13,300 13,300 13,300 13,300 13,300 13,300 13,300 12,200 12,200 12,200 12,200 12,200 12,200 12,200 12,200
PT. NUMBER
- FOR FAST & HEAVY STOCK REMOVAL METAL/STAINLESS STEEL
Ferrous Metals, Iron, Steel, Stainless Steel.
100% POLYESTER
50% POLYESTER 50% COTTON
SHAPE
SPECS
FLEXIBILITY
PT. NUMBER NEW! MAX4540ZJ7
100% POLYESTER
SHAPE
T-27
BACKING
100% COTTON
FLEXIBILITY
SHAPE
STAINLESS STEEL
BACKING
50% POLYESTER 50% COTTON
FLEXIBILITY
100% POLYESTER
BACKING
Ferrous Metals, Iron, Steel, Stainless Steel.
100% COTTON
T-27
T-27 PT. NUMBER
SPECS
MAX4536Z MAX4536ZH MAX4540Z MAX454ZH
4-1/2 x 7/8 4-1/2 x 5/8-11 4-1/2 x 7/8 4-1/2 x 5/8-11
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
GRIT
Z36 Z36 Z40 Z40
MAX RPM PCS/BOX
13,300 13,300 13,300 13,300
10 10 10 10
ABRASIVES
SRT™ SERIES (SYNTHETIC RESINOID TECHNOLOGY)
CUT-OFF WHEEL
DEPRESSED CENTER WHEEL
FLEXIBLE WHEEL
THE FASTEST WHEELS ON THE MARKET! OUTPERFORMS ZIRCONIA! Engineered grain SRT™ grain has been engineered to last longer and consistently produce the highest quality finish of any product on the market today.
Binding element The proprietary bonding agents used to produce SRT™ products give the SRT™ grain its unique color, as well as providing more strength and durability to the wheels. This in turn lessens the vibration the operator feels and improves the overall efficiency of the product.
Heat buildup Heat buildup causes an undesirable finish SRT™ products have been engineered to run considerably cooler than competitive products in the field. Better heat dispersal increases the performance as well as the appearance of the completed work.
Non-contaminating Pearl's SRT™ grains are harder than other abrasive grains therefore they can penetrate and cut even the hardest materials such as stainless steel without contamination. (Except SRT™ Cut-off wheels).
Superior quality finish Pearl's SRT™ grains remain consistently sharp thus enabling the wheel to produce a consistent finish with increased grinding efficiency. FOR USE ON:
STAINLESS STEEL AND HIGH TENSILE ALLOYS
21
ABRASIVES
WIRE BRUSHES
WIRE BRUSHES KNOT WHEEL STRINGER BEAD TWIST TEMPERED WIRE
CRIMPED CUP TEMPERED WIRE
PT. NUMBER
SPECS
CLWBC258 CLWBC458 CLWBC558 CLWBC658
2-3/4 x .015 x 5/8-11 4 x .015 x 5/8-11 5 x .015 x 5/8-11 6 x .015 x 5/8-11
MAX RPM
PT. NUMBER
SPECS
MAX RPM
12,500 8,500 8,000 6,000
CLWBK458B CLWBK558B CLWBK658B
4 x .020 x 5/8-11 5 x .020 x 5/8-11 6 x .020 x 5/8-11
20,000 12,000 12,000
STAINLESS WIRE
Made with 302 stainless CLWBK458BS 4 x .020 x 5/8-11 20,000 CLWBK558BS 5 x .020 x 5/8-11 12,000 CLWBK658BS 6 x .020 x 5/8-11 12,000
KNOT CUP TEMPERED WIRE
PT. NUMBER
SPECS
CLWBK258 CLWBK458 CLWBK558 CLWBK658
2-3/4 x .020 x 5/8-11 4 x .020 x 5/8-11 5 x .020 x 5/8-11 6 x .020 x 5/8-11
MAX RPM
12,500 8,500 6,500 6,000
STAINLESS WIRE CLWBK258S CLWBK458S CLWBK558S CLWBK658S
Made with 302 stainless 2-3/4 x .020 x 5/8-11 12,500 4 x .020 x 5/8-11 8,500 5 x .020 x 5/8-11 6,500 6 x .020 x 5/8-11 6,000
KNOT WHEEL REGULAR TWIST TEMPERED WIRE
PT. NUMBER
SPECS
CLWBK458T 4 x .020 x 5/8-11 CLWBK558T 5 x .020 x 5/8-11 PIPELINER CLWBP658 6 x .020 x 5/8-11
MAX RPM
20,000 12,000 9,000
STAINLESS WIRE
Made with 302 stainless CLWBK458TS 4 x .020 x 5/8-11 20,000 CLWBK558TS 5 x .020 x 5/8-11 12,000 CLWBK658TS 6 x .020 x 5/8-11 9,000
BANDED (BRIDLE) KNOT CUP TEMPERED WIRE CRIMPED WHEEL TEMPERED WIRE PT. NUMBER
SPECS
CLWBB258 CLWBB458 CLWBB558
2-3/4 x .020 x 5/8-11 4 x .020 x 5/8-11 5 x .020 x 5/8-11
MAX RPM
11,000 8,500 6,500
PT. NUMBER
SPECS
CLWBCW458 4 x .015 x 5/8-11
22
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
MAX RPM
12,500
WIRE BRUSHES WIRE BRUSHES
ABRASIVES
CRIMPED WHEEL END BRUSH TEMPERED WIRE
BENCH WHEEL WIRE BRUSHES TEMPERED WIRE
PT. NUMBER
SPECS
CLBW610 CLBW612 CLBW710 CLBW810 CLBW1010
6 x 3/4 x 2, 5/8 6 x 5/8 x 5/8 7 x 3/4 x 2, 5/8 8 x 3/4 x 3-1/8 x 2, 5/8 10 x 3/4 x 4, 2, 5/8
MAX RPM
PT. NUMBER
SPECS
6,000 6,000 6,000 4,500 3,600
CLCWEB112 CLCWEB212 CLCWEB300
1-1/2 x.0118 x 1/4 2-1/2 x .0118 x 1/4 3 x .0118 x 1/4
All with arbor reducers 0.014 wire.
MAX RPM
6,000 6,000 6,000
STAINLESS WIRE
Made with 302 stainless CLCWEB112S 1-1/2 x.0118 x 1/4 6,000 CLCWEB212S 2-1/2 x .0118 x 1/4 6,000 CLCWEB300S 3 x .0118 x 1/4 6,000
WIREBRUSH ADAPTER PART NO.
SPECS
WBAD5810
5/8-11 to M10 x 1.25 arbor adapter
CRIMPED END BRUSH TEMPERED WIRE
PT. NUMBER
SPECS
CLCEB34 CLCEB1
3/4 x .014 x 1/4 1 x .020 x 1/4
STAINLESS WIRE CLCEB34S CLCEB1S
12" CRACK CLEANING BRUSH TEMPERED WIRE
SPECS
CLWBK12
12 x .025 x 1
20,000 20,000 Made with 302 stainless 20,000 20,000
KNOT END BRUSH TEMPERED WIRE
Removes fillings from expansion joints. Longer wire to get deeper into crevices. Number of knots-34. Excellent for working on concrete or asphalt. PT. NUMBER
3/4 x .010 x 1/4 1 x .014 x 1/4
MAX RPM
MAX RPM
8,500
PT. NUMBER
SPECS
CLKEB34 CLKEB1
3/4 x .014 x 1/4 1 x .014 x 1/4
STAINLESS WIRE CLKEB34S CLKEB1S
3/4 x .014 x 1/4 1 x .014 x 1/4
MAX RPM
20,000 20,000 Made with 302 stainless 20,000 20,000
23
SCRATCH BRUSHES ACID BRUSHES, SCRATCH BRUSHES AND CARBIDE BURR
ABRASIVES
NEW!
ACID BRUSHES
CARBIDE BUR Pearl Abrasive Co. offers a new line of tungsten carbide burs in the most popular shapes and sizes. Pearl supplies both Double Cut carbide burs for ferrous metal as well as the Aluminum Cut for non-ferrous metals.
ACID BRUSH
PT. NUMBER
SPECS
PCS/BOX
CLAB600 CLAB650 CLAB618
6 x 3/8 x 7/8 6-1/2 x 7/16 x 13/16 6-1/8 x 9/16 x 7/8
12/144 12/144 12/144
SCRATCH BRUSHES
DOUBLE CUT The most popular bur for ferrous materials. The flutes are precision ground in both left and right directions, offering aggressive stock removal and a smooth finish.
3 X 7 SMALL CLEANING WIRE SCRATCH BRUSH Length of Brush = 1-7/16 in. • Block Width = 7/16 in. Overall Length = 7-3/4 in.
PT. NUMBER
SPECS
SCB37 SCB37S SCB37B
3 x 7 Carbon Steel 3 x 7 Stainless Steel 3 x 7 Brass
PCS/BOX
12 12 12
3 X 19 CURVED HANDLE WIRE SCRATCH BRUSH Length of Brush = 6 in. • Brush area Width = 31/32 in. Overall Length = 13-11/16 in.
PT. NUMBER
SPECS
SCB319 SCB319S SCB319K
3 x 19 Carbon Steel 3 x 19 Stainless Steel 3 x 19 Carbon Steel w/ scraper
PCS/BOX
12 12 12
4 X 16 SHOE HANDLE WIRE SCRATCH BRUSH
24
SPECS
SCB416 SCB416S SCB416K
4 x 16 Carbon Steel 4 x 16 Stainless Steel 4 x 16 Carbon Steel w/ scraper
METAL Ferrous Metals, Iron, Steel, Stainless Steel, Other High Tensile Alloys. PT. NUMBER
SPECS
CBSA1P CBSA3P CBSA5P CBSB5P CBSC3P CBSC5P CBSD1P CBSD3P CBSD5P CBSE3P CBSE5P CBSF1P CBSF3P CBSF5P CBSG3P CBSL4P CBKITP
1/4 x 3/4 x 1/4 SA1 32,000 3/8 x 3/4 x 1/4 SA3 19,000 1/2 x 1 x 1/4 SA5 16,000 1/2 x 1 x 1/4 SB5 16,000 3/8 x 3/4 x 1/4 SC3 19,000 1/2 x 1 x 1/4 SC5 16,000 1/4 x 7/32 x 1/4 SD1 32,000 3/8 x 5/16 x 1/4 SD3 19,000 1/2 x 7/16 x 1/4 SD5 16,000 3/8 x 5/8 x 1/4 SE3 19,000 1/2 x 7/8 x 1/4 SE5 16,000 1/4 x 3/4 x 1/4 SF1 32,000 3/8 x 3/4 x 1/4 SF3 19,000 1/2 x 1 x 1/4 SF5 16,000 3/8 x 3/4 x 1/4 SG3 19,000 1/2 x 1-1/8 x 1/4 SL4 16,000 (8) Incl: SA5, SC3, SC5, SD5, SF3, SF5, SG3 and SL4
TYPE
MAX RPM
ALUMINUM CUT The Aluminum Cut is designed to be used on NonFerrous metals and has an open cut for aggressive stock removal, as well as avoids loading of material on softer metals.
NON-FERROUS METAL
Length of Brush = 5-1/4 in. • Block Width = 1-1/8 in. Overall Length = 10 in.
PT. NUMBER
- PRECISION GROUND TUNGSTEN CARBIDE FOR AGGRESSIVE CUTTING AND LONG LIFE • DOUBLE CUT ALLOWS FOR SMOOTH OPERATION WITH LITTLE OR NO VIBRATION • IDEAL FOR SMALLER, HARD-TO-REACH AREAS • EXCELLENT FOR WELD DRESSING, SMOOTHING CASTINGS AND SHAPING HOLES • 1/4" SHANK
PCS/BOX
12 12 12
Non-Ferrous Metals, Aluminum, Brass, Copper, Magnesium, Soft Steel, Hard Rubber, Zinc Alloys. PT. NUMBER
SPECS
CBSA3ALP CBSA5ALP CBSC3ALP CBSD5ALP CBSE5ALP CBSF3ALP CBSF5ALP CBSL5ALP
3/8 x 3/4 x 1/4 1/2 x 1 x 1/4 3/8 x 3/4 x 1/4 1/2 x 7/16 x 1/4 1/2 x 7/8 x 1/4 3/8 x 3/4 x 1/4 1/2 x 1 x 1/4 5/8 x 1-3/16 x 1/4
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
TYPE
SA3-AL SA5-AL SC3-AL SD5-AL SE5-AL SF3-AL SF5-AL SL5-AL
MAX RPM
35,000 30,000 35,000 30,000 30,000 35,000 30,000 22,000
BENCH GRINDING WHEELS BENCH GRINDING WHEELS
ABRASIVES
BENCH GRINDING WHEELS Pearl’s bench grinding wheels are designed for use on work benches or floor standing machines. Wheels are not affected by water, oils or acids. Each wheel is balanced and ring tested. One size wheel can fit several different machines using the included bushing set. Use Aluminum Oxide bench grinding wheels for general purpose tool sharpening, light to heavy stock removal on ferrous metals carbon steel, steel and iron. Use Green Silicon Carbide bench grinding wheels for fast burr-free grinding of tungsten carbide tipped tools, ferrous and non-ferrous metals.
GREEN SILICON CARBIDE
METAL ALUMINUM OXIDE METAL
Tungsten Carbide-Tipped Tools, Ferrous and Non-Ferrous Metals.
Ferrous Metals, Iron, Steel.
T-1
T-1
PT. NUMBER
SPECS
BA612036 BA612060 BA634024 BA634036 BA634046 BA634060 BA634080 BA610024 BA610036 BA610046 BA610060 BA610080 BA710024 BA710036 BA710046 BA710060 BA710080 BA810024 BA810036 BA810046 BA810060 BA810080 BA101024 BA101036 BA101060 BA122024 BA122036 BA122060
6 x 1/2 x 1 6 x 1/2 x 1 6 x 3/4 x 1 6 x 3/4 x 1 6 x 3/4 x 1 6 x 3/4 x 1 6 x 3/4 x 1 6x1x1 6x1x1 6x1x1 6x1x1 6x1x1 7x1x1 7x1x1 7x1x1 7x1x1 7x1x1 8x1x1 8x1x1 8x1x1 8x1x1 8x1x1 10 x 1 x 1-1/4 10 x 1 x 1-1/4 10 x 1 x 1-1/4 12 x 2 x 1-1/4 12 x 2 x 1-1/4 12 x 2 x 1-1/4
GRIT
MAX RPM
PT. NUMBER
SPECS
GRIT
MAX RPM
A36 A60 A24 A36 A46 A60 A80 A24 A36 A46 A60 A80 A24 A36 A46 A60 A80 A24 A36 A46 A60 A80 A24 A36 A60 A24 A36 A60
4,140 4,140 4,140 4,140 4,140 4,140 4,140 4,140 4,140 4,140 4,140 4,140 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 3,600 2,485 2,485 1,800 1,800 1,800 1,800
BG612060 BG612080 BG612120 BG634060 BG634080 BG634120 BG610060 BG610080 BG610120 BG710060 BG710080 BG710120 BG810060 BG810080 BG810120 BG101060 BG101080 BG101120 BG122060 BG122080 BG122120
6 x 1/2 x 1 6 x 1/2 x 1 6 x 1/2 x 1 6 x 3/4 x 1 6 x 3/4 x 1 6 x 3/4 x 1 6x1x1 6x1x1 6x1x1 7x1x1 7x1x1 7x1x1 8x1x1 8x1x1 8x1x1 10 x 1 x 1-1/4 10 x 1 x 1-1/4 10 x 1 x 1-1/4 12 x 2 x 1-1/4 12 x 2 x 1-1/4 12 x 2 x 1-1/4
C60 C80 C120 C60 C80 C120 C60 C80 C120 C60 C80 C120 C60 C80 C120 C60 C80 C120 C60 C80 C120
4,140 4,140 4,140 4,140 4,140 4,140 4,140 4,140 4,140 3,600 3,600 3,600 3,600 3,600 3,600 2,485 2,485 2,485 1,800 1,800 1,800
Wheel includes a nested reducing bushing set: 6 - 8" wheels (1 to 3/4, 5/8 and 1/2"). 10 - 12" wheels (1-1/4 to 1").
Wheel includes a nested reducing bushing set: 6 - 8" wheels (1 to 3/4, 5/8 and 1/2"). 10 - 12" wheels (1-1/4 to 1").
25
ABRASIVES
THIN CUT-OFF WHEELS
THIN CUT-OFF WHEELS Type 1 (41) and Type 27 (42) Slimcut are thin cut-off wheels from Pearl. Pearl Abrasive has an expanded line of thin cut-off wheels that meet a variety of performance standards and price demands.
METAL
METAL
ALUMINUM OXIDE SLIMCUT40™ PR0-V™
ALUMINUM OXIDE SLIMCUT40™ CONTAMINANT FREE Fe + S + Cl <0.1%
METAL
METAL
Ferrous Metals, Iron, Steel, Non-Ferrous, Sheet Metals, Copper, Stainless Steel.
Ferrous Metals, Iron, Steel, Non-Ferrous, Sheet Metals, Copper, Stainless Steel.
T-1 PT. NUMBER
SPECS
PVCW4532A PVCW0532A PVCW0632A
4-1/2 x .040 x 7/8 5 x .040 x 7/8 6 x .040 x 7/8
GRIT
A46 A46 A46
MAX RPM PCS/BOX
13,300 12,200 10,200
25 25 25
T-1 PT. NUMBER
SPECS
CW4532A CW0532A CW0532B CW0632A CW0632B CW0632C CW0632D CW0732A CW0716A
4-1/2 x .040 x 7/8 5 x .040 x 7/8 5 x .040 x 5/8 6 x .040 x 7/8 6 x .040 x 5/8 6 x .040 x 1/2 6 x .040 x 3/8 7 x .040 x 7/8 7 x 1/16 x 7/8
METAL
METAL
ALUMINUM OXIDE SLIMCUT45™ PR0-V™
ALUMINUM OXIDE SLIMCUT45™
GRIT
A46 A46 A46 A46 A46 A46 A46 A46 A60
MAX RPM PCS/BOX
13,300 12,200 12,200 10,200 10,200 10,200 10,200 8,500 8,500
25 25 25 25 25 25 25 25 25
CONTAMINANT FREE Fe + S + Cl <0.1%
METAL
METAL
Ferrous Metals, Iron, Steel, Non-Ferrous, Sheet Metals, Copper, Stainless Steel.
Ferrous Metals, Iron, Steel, Non-Ferrous, Sheet Metals, Copper, Stainless Steel.
T-27
26
T-27
PT. NUMBER
SPECS
PVDCW45A PVDCW05A PVDCW06A
4-1/2 x .045 x 7/8 5 x .045 x 7/8 6 x .045 x 7/8
GRIT
A46 A46 A46
MAX RPM PCS/BOX
13,300 12,200 10,200
25 25 25
PT. NUMBER
SPECS
DCW04A DCW45A DCW05A DCW06A DCW07A
4 x .045 x 5/8 4-1/2 x .045 x 7/8 5 x .045 x 7/8 6 x .045 x 7/8 7 x .045 x 7/8
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
GRIT
A46 A46 A46 A46 A46
MAX RPM PCS/BOX
13,700 13,300 12,200 10,200 8,500
25 25 25 25 25
ABRASIVES
THIN CUT-OFF WHEELS
NOW IN STACKABLE PLASTIC CONTAINERS. 25 wheels per container. • Protects wheels from damage and moisture. • Easy to carry and store.
METAL
METAL
ALUMINUM OXIDE SLIMCUT45™ PLUS
ALUMINUM OXIDE SLIMCUT45™ REDLINE™ MAX-A.O.™
CONTAMINANT FREE Fe + S + Cl <0.1%
METAL
METAL
Ferrous Metals, Iron, Steel, Non-Ferrous, Sheet Metals, Copper, Stainless Steel.
Ferrous Metals, Iron, Steel, Non-Ferrous, Sheet Metals, Copper, Stainless Steel.
T-1
T-1 PT. NUMBER
SPECS
CWPL4532A CWPL0532A CWPL0632A CWPL0732A
4-1/2 x .045 x 7/8 5 x .045 x 7/8 6 x .045 x 7/8 7 x .062 x 7/8
GRIT
A46 A46 A46 A46
MAX RPM PCS/BOX
13,300 12,200 10,200 8,500
25 25 25 25
PT. NUMBER
SPECS
CWRED4532A CWRED0532A CWRED0632A CWRED0732A
4-1/2 x .045 x 7/8 5 x .045 x 7/8 6 x .045 x 7/8 7 x .062 x 7/8
METAL
METAL
ALUMINUM OXIDE SLIMCUT45™ PLUS
ALUMINUM OXIDE SLIMCUT45™ REDLINE™ MAX-A.O.™
CONTAMINANT FREE Fe + S + Cl <0.1%
METAL
METAL
Ferrous Metals, Iron, Steel, Non-Ferrous, Sheet Metals, Copper, Stainless Steel.
Ferrous Metals, Iron, Steel, Non-Ferrous, Sheet Metals, Copper, Stainless Steel.
GRIT
A46 A46 A46 A46
MAX RPM PCS/BOX
13,300 12,200 10,200 8,500
25 25 25 25
T-27
T-27 PT. NUMBER
SPECS
DCWPL45A DCWPL05A DCWPL06A DCWPL07A
4-1/2 x .045 x 7/8 5 x .045 x 7/8 6 x .045 x 7/8 7 x .062 x 7/8
GRIT
A46 A46 A46 A46
MAX RPM PCS/BOX
13,300 12,200 10,200 8,500
25 25 25 25
PT. NUMBER
SPECS
DCWRED45A DCWRED05A DCWRED06A DCWRED07A
4-1/2 x .045 x 7/8 5 x .045 x 7/8 6 x .045 x 7/8 7 x .062 x 7/8
GRIT
A46 A46 A46 A46
MAX RPM PCS/BOX
13,300 12,200 10,200 8,500
25 25 25 25
27
CUT-OFF WHEELS CUT-OFF WHEELS
ABRASIVES
CUT OFF WHEELS SMALL DIAMETER CUT-OFF WHEELS FOR CIRCULAR SAWS AND GRINDERS
METAL
METAL
ALUMINUM OXIDE SILVER LINE™
ALUMINUM OXIDE PREMIUM
METAL
METAL
Ferrous Metals, Iron, Steel, Angle Iron, Rebar, Pipes.
Ferrous Metals, Iron, Steel, Angle Iron, Rebar, Pipes.
T-1
T-1
28
PT. NUMBER
SPECS
GRIT
CW0310T CW0320T CW0330T CW0340T CW0350T CW0360T CW0410T CW0420T CW0430T CW0440T CW0490T CW4510T CW071DT CW0716T
3 x 1/16 x 3/8 3 x 1/8 x 3/8 3 x 1/16 x 1/4 3 x 1/8 x 1/4 3 x 1/32 x 3/8 3 x 1/32 x 1/4 4 x 1/16 x 3/8 4 x 1/8 x 3/8 4 x 1/16 x 5/8 4 x 1/8 x 5/8 4 x 1/32 x 3/8 4-1/2 x 1/16 x 7/8 7 x 1/8 x ◊, 5/8 7 x 1/16 x 5/8
A46T A46T A46T A46T A60T A60T A46T A46T A46T A46T A60T A46T A30R A46T
MAX RPM PCS/BOX
25,000 25,000 25,000 25,000 25,000 25,000 19,000 19,000 19,000 19,000 19,000 13,300 8,500 8,500
25 25 25 25 25 25 25 25 25 25 25 25 25 25
PT. NUMBER
SPECS
CW201638 CW201814 CW201838 CW251614 CW251638 CW251838 CW0310 CW0320 CW0330 CW0340 CW0350 CW0410 CW0420 CW0430 CW0440 CW0450 CW0460 CW0470 CW0480 CW0490 CW049A CW4510 CW4520 CW061D CW0710D CW0810D
2 x 1/16 x 3/8 2 x 1/8 x 1/4 2 x 1/8 x 3/8 2-1/2 x 1/16 x 1/4 2-1/2 x 1/16 x 3/8 2-1/2 x 1/8 x 3/8 3 x 1/16 x 3/8 3 x 1/8 x 3/8 3 x 1/16 x 1/4 3 x 1/8 x 1/4 3 x 1/32 x 3/8 4 x 1/16 x 3/8 4 x 1/8 x 3/8 4 x 1/16 x 5/8 4 x 1/8 x 5/8 4 x 1/16 x 1/4 4 x 1/8 x 1/4 4 x 1/16 x 7/8 4 x 1/8 x 7/8 4 x 1/32 x 3/8 4 x 1/32 x 5/8 4-1/2 x 1/16 x 7/8 4-1/2 x 1/8 x 7/8 6 x 1/8 x ◊, 5/8 7 x 1/8 x ◊, 5/8 8 x 1/8 x ◊, 5/8
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
GRIT
A54T A54T A54T A54T A54T A54T A46T A46T A46T A46T A60T A46T A46T A46T A46T A46T A46T A46T A46T A60T A60T A46T A46S A36R A36R A36R
MAX RPM PCS/BOX
38,200 38,200 38,200 29,300 29,300 29,300 25,000 25,000 25,000 25,000 25,000 19,000 19,000 19,000 19,000 19,000 19,000 19,000 19,000 19,000 19,000 13,300 13,300 10,100 8,500 6,800
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
CUT-OFF WHEELS CUT-OFF WHEELS
ABRASIVES
Pearl offers a wide variety of grain configurations to meet all possible cutting requirements. Each wheel is fully reinforced and designed for long life and fast cutting performance. Available sizes 2" to 20" diameters.
METAL
METAL/STAINLESS STEEL
ZIRCONIA
SRT™
METAL
METAL/STAINLESS STEEL Ferrous Metals, Iron, steel and Other High Tensile Alloys.
Ferrous Metals, Iron, Steel.
T-1
T-1
PT. NUMBER
SPECS
CW0310Z CW0330Z CW0350Z CW0410Z CW0430Z CW0490Z
3 x 1/16 x 3/8 3 x 1/16 x 1/4 3 x 1/32 x 3/8 4 x 1/16 x 3/8 4 x 1/16 x 5/8 4 x 1/32 x 3/8
GRIT
Z30 Z30 Z60 Z30 Z30 Z60
MAX RPM PCS/BOX
25,000 25,000 25,000 19,000 19,000 19,000
25 25 25 25 25 25
MASONRY
PT. NUMBER
SPECS
CW310SRT CW330SRT CW350SRT CW410SRT CW430SRT CW490SRT CW071DSR
3 x 1/16 x 3/8 3 x 1/16 x 1/4 3 x 1/32 x 3/8 4 x 1/16 x 3/8 4 x 1/16 x 5/8 4 x 1/32 x 3/8 7 x 1/8 x ◊, 5/8
GRIT
SRT46 SRT46 SRT60 SRT46 SRT46 SRT60 SRT36
MAX RPM PCS/BOX
25,000 25,000 25,000 19,000 19,000 19,000 8,500
25 25 25 25 25 25 25
MANDRELS AND ADAPTERS FOR CUT-OFF WHEELS
SILICON CARBIDE PREMIUM MASONRY
MANDRELS
Concrete, Stone, Cast Iron and Non-Ferrous Metals.
PART NO.
ADM25
SIZE
1/4 and 3/8 combination mandrel 1/4 shank
ADAPTERS
T-1
PART NO.
PT. NUMBER
SPECS
CM061D CM0710D CM0810D
6 x 1/8 x ◊, 5/8 7 x 1/8 x ◊, 5/8 8 x 1/8 x ◊, 5/8
GRIT
C36R C36R C36R
MAX RPM PCS/BOX
10,100 8,500 6,800
25 25 25
CAD158 CAD178 CAD120 CADD58
SIZE
1 to 5/8 Adapter 1 to 7/8 Adapter 1 to 20mm Adapter ◊ to 5/8 Adapter
29
ABRASIVES
CUT-OFF WHEELS
CUT-OFF WHEELS FOR CHOP SAWS AND STATIONARY SAWS
METAL
METAL
ALUMINUM OXIDE SILVER LINE™
ALUMINUM OXIDE PREMIUM
METAL
METAL
Ferrous Metals, Iron, Steel, Angle Iron, Rebar, Pipes.
Ferrous Metals, Iron, Steel, Angle Iron, Rebar, Pipes.
T-1
T-1 PT. NUMBER
SPECS
GRIT
CW1020T CW12MAT CW1220T CW14MAT CW1420T CW1610T CW1810T CW201GT CW202GT
10 x 1/8 x 1 12 x 7/64 x 1 12 x 1/8 x 1 14 x 7/64 x 1 14 x 1/8 x 1 16 x 1/8 x 1** 18 x 1/8 x 1** 20 x 1/8 x 1** 20 x 5/32 x 1**
A30R A30P A30Q A30P A30Q A30R A30S A30S A30S
MAX RPM PCS/BOX
6,100 5,100 5,100 4,400 4,400 3,800 3,380 3,000 3,000
10/30 10/30 10/30 10/30 10/30 10 5 5 5
**Triple Reinforced
PT. NUMBER
SPECS
CW1010 CW1020 CW1020A CW12MA CW1232MAD CW1220 CW14MA CW1432MAD CW1420 CW1610 CW1630 CW1810 CW201G CW201GE CW202G CW202GE
10 x 1/16 x 1 10 x 1/8 x 1 10 x 1/8 x 5/8 12 x 7/64 x 1 12 x 3/32 x 1 12 x 1/8 x 1 14 x 7/64 x 1 14 x 3/32 x 1 14 x 1/8 x 1 16 x 1/8 x 1 16 x 5/32 x 1 18 x 1/8 x 1 20 x 1/8 x 1 20 x 1/8 x 1 20 x 5/32 x 1 20 x 5/32 x 1
GRIT
A36R A36T A36T A36P A36S A36T A36P A36S A36S A36S A36S A36S A30S A30P A30S A30P
MAX RPM PCS/BOX
6,100 6,100 6,100 5,100 5,100 5,100 4,400 4,400 4,400 3,800 3,800 3,380 3,000 3,000 3,000 3,000
10/30 10/30 10/30 10/30 10/30 10/30 10/30 10/30 10/30 10 10 5 5 5 5 5
HI-SPEED CUT-OFF WHEELS FOR GAS POWERED SAWS
METAL
METAL
ALUMINUM OXIDE SILVER LINE™
ALUMINUM OXIDE PREMIUM
METAL
METAL
Ferrous Metals, Iron, Steel, Angle Iron, Rebar, Pipes.
Ferrous Metals, Iron, Steel, Angle Iron, Rebar, Pipes.
T-1
T-1 PT. NUMBER
SPECS
CW122GT CW1222GT CW142GT CW1422GT
12 x 1/8 x 1** 12 x 1/8 x 20mm** 14 x 1/8 x 1** 14 x 1/8 x 20mm**
**Triple Reinforced
30
GRIT
A30R A30R A30R A30R
MAX RPM PCS/BOX
6,300 6,300 5,400 5,400
10/30 10/30 10/30 10/30
PT. NUMBER
SPECS
GRIT
CW122G CW1222G CW142G CW1422G
12 x 1/8 x 1** 12 x 1/8 x 20mm** 14 x 1/8 x 1** 14 x 1/8 x 20mm**
A36T A36T A36S A36S
**Triple Reinforced
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
MAX RPM PCS/BOX
6,300 6,300 5,400 5,400
10/30 10/30 10/30 10/30
ABRASIVES
CUT-OFF WHEELS
SPECIALTY CUT-OFF WHEELS FOR CHOP SAWS, STATIONARY SAWS AND HIGH-SPEED GAS POWERED SAWS MASONRY SILICON CARBIDE PREMIUM
METAL/STAINLESS STEEL
MASONRY
SRT™
Concrete, Stone, Cast Iron and Non-Ferrous Metals.
METAL/STAINLESS STEEL Ferrous Metals, Iron, steel and Other High Tensile Alloys.
T-1 T-1 PT. NUMBER
SPECS
CW1020SR CW12MASR CW1220SR CW14MASR CW1420SR CW1610SR CW1630SR
10 x 1/8 x 1 12 x 7/64 x 1 12 x 1/8 x 1 14 x 7/64 x 1 14 x 1/8 x 1 16 x 1/8 x 1 16 x 5/32 x 1
GRIT
SRT36 SRT36 SRT36 SRT36 SRT36 SRT36 SRT36
MAX RPM PCS/BOX
6,100 5,100 5,100 4,400 4,400 3,800 3,800
10/30 10/30 10/30 10/30 10/30 10 10
PT. NUMBER
SPECS
CM1010 CM1220 CM1222 CM1230 CM1410A CM1420A CM1422A CM1430A*** CM1430G***
10 x 1/8 x 1 12 x 1/8 x 1** 12 x 1/8 x 20mm** 12 x 5/32 x 1** 14 x 1/8 x 7/8** 14 x 1/8 x 1** 14 x 1/8 x 20mm** 14 x 1/8 x 1** 14 x 3/16 x 1**
**Triple Reinforced
GRIT
C36S C36S C36S C36S C36S C36S C36S C36S C24R
MAX RPM PCS/BOX
6,100 6,300 6,300 6,300 5,400 5,400 5,400 5,400 5,400
10/30 10/30 10/30 10/30 10/30 10/30 10/30 10/30 10/30
***With Pinhole
STUD CUTTING METAL Ferrous Metals, Iron, Steel, Tube, Pipe & Light Gauge Metals.
T-1 PT. NUMBER
SPECS
GRIT
CW14STUD
14 x 3/32 x 1
A46S
MAX RPM PCS/BOX
4,400
10/30
DUCTILE IRON WHEEL METAL
METAL/STAINLESS STEEL
Ductile iron, Cast Iron, Hard Metals, Concrete Coated Steel.
SRT™ METAL/STAINLESS STEEL Ferrous Metals, Iron, steel and Other High Tensile Alloys.
• Special mix of grains for cutting a variety of applications. • Fast cutting and long life. • Consistent density, balance and quality.
T-1 PT. NUMBER
CW12GSR CW122GSR CW14GSR CW142GSR
SPECS
12 x 1/8 x 1 12 x 1/8 x 20mm 14 x 1/8 x 1 14 x 1/8 x 20mm
GRIT
SRT36 SRT36 SRT36 SRT36
MAX RPM PCS/BOX
6,300 6,300 5,400 5,400
10/30 10/30 10/30 10/30
T-1 PT. NUMBER
SPECS
CDC1230 CDC1232 CDC1430 CDC1432
12 x 5/32 x 1** 12 x 5/32 x 20mm** 14 x 5/32 x 1** 14 x 5/32 x 20mm**
GRIT
AC30S AC30S AC30S AC30S
MAX RPM PCS/BOX
6,300 6,300 5,400 5,400
10/30 10/30 10/30 10/30
**Triple Reinforced
31
ABRASIVES
SPECIALTY CUT-OFF WHEELS
Pearl’s Titanium Carbide Tip Metal blade (TC-1000™) is designed to cut a variety of mild ferrous metals with fewer burs, less dust and reduced material burning than abrasive products. It provides much longer life than traditional abrasive wheels. The Pearl TC-1000™ is engineered with a triple chip design for added durability.
NEW! TC-1000™ TITANIUM CARBIDE TIP BLADE
CARBIDE TIP
METAL Ferrous Metal, Angle Iron, Conduit, Metal Studs, Pipe, Aluminum, Plastic.
BENEFITS: - TITANIUM CARBIDE FOR EXTRA LONG LIFE - MINIMAL VIBRATION PT. NUMBER
SPECS
NO. OF TEETH
TC007M TC725M TC008M TC009M TC014M
7 x 20mm 7-1/4 x ◊, 5/8 8 x 5/8 9x1 14 x 1
36 48 50 48 80
MAX RPM
3,500 5,800 5,000 2,700 1,500
- TRIPLE CHIP DESIGN FOR ADDED DURABILITY - DESIGNED TO BE USED ON A VARIETY OF FERROUS MATERIALS - CUTS CLEAN AND COOL - ABLE TO BE RE-SHARPENED
EXCELLENT FOR METAL STUDS AND DUCTILE IRON!
NEW! P4™ MULTI-CUT RESCUE/ UTILITY BLADE
PROVIDES UP TO 100X MORE LIFE THAN TRADITIONAL ABRASIVE WHEELS WHEN CUTTING METALS!
Metal Studs, Ductile Iron, Concrete, Asphalt, Masonry, Steel, Stainless Steel, Aluminum, Stucco, Tile Backer Board, Roof Tile, Corrugated Roofing, PVC, Plastic, Wood, Pipe, Dry Wall, Rebar.
PT. NUMBER
SPECS
DIA045MC DIA005MC DIA007MC DIA012MC DIA014MC DIA016MC
4-1/2 x .080 x 7/8, 5/8 5 x .080 x 7/8, 5/8 7 x .095 x 7/8, ◊, 5/8 12 x .125 x 1, 20mm w/ side protection 14 x .125 x 1, 20mm w/ side protection 16 x .125 x 1, 20mm w/ side protection
MAX RPM
13,000 12,000 8,730 6,115 5,500 3,820
Pearl’s P4™ Multi-Cut Rescue/Utility blade is designed to cut a variety of materials, as well as to be used by Fire Fighters, Police and other Rescue units in emergencies. It is ideal for time sensitive situations and will provide a fast, efficient cut on many different materials such as ductile iron, metal studs, concrete, wood, steel doors, pad locks, plastic, PVC, roofing and much more. The P4™ Multi-Cut blade is engineered with a special Vacuum Brazed Technology™ on the rim and steel core for fast, clean cutting. The diamond particles are fused to the steel core for protection, added durability and heat resistance. BENEFITS: - EXTRA LONG LIFE - FAST CLEAN CUT - 12" TO 16" BLADES HAVE DIAMOND ELECTROPLATED SIDE PROTECTION WHICH PROTECTS THE CORE, REDUCES HEAT AND PREVENTS BINDING
VBT™ VACUUM BRAZED TECHNOLOGY VBT™ allows for more diamond particles to be exposed on the core. This exposure produces the aggressive cutting action.
- VACUUM BRAZED TECHNOLOGY FUSED TO STEEL CORE FOR PROTECTION, DURABILITY AND HEAT RESISTANCE - DESIGNED TO BE USED ON A VARIETY OF MATERIALS - EXCELLENT FOR EMERGENCY SITUATIONS - DRY CUTTING
32
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
SURFACE PREPARATION
ABRASIVES
REDLINE™ MAX A.O. SLIMCUT™ THIN CUT-OFF WHEELS
TYPE 1 (41)
TYPE 27 (42)
OUTPERFORMS THE COMPETITION! Pearl’s innovative Max A.O. Super Grain Extremely long life Super fast cutting Smooth cutting Superior cutting efficiency. FOR USE ON:
METAL AND STAINLESS STEEL
33
ABRASIVES
SURFACE PREPARATION
SURFACE PREPARATION -
METAL/STAINLESS STEEL STRIPPING (NON-WOVEN DISC)
CLEAN, SAND CONCRETE AND METAL SURFACES PREP SURFACES FOR NEW COATINGS FAST, AGGRESSIVE SURFACE REMOVAL NON-LOADING
METAL Ferrous Metals- Iron, Steel and Stainless Steel. Paint, Rust, Stain Removal.
CONCRETE/STONE SILICON CARBIDE TURBO CUT™ DISC
T-27
CONCRETE/STONE Stone, Cast Iron, NonFerrous Metals and Floor Coatings.
T-27 PT. NUMBER
SPECS
FSP4516 FSP5016 FSP7016
4-1/2 x 7/8 5 x 7/8 7 x 7/8
GRIT
C16 C16 C16
PT. NUMBER
SPECS
STRIP45 STRIP45H STRIP50 STRIP50H STRIP70 STRIP70H
4-1/2 x 7/8 4-1/2 x 5/8-11 5 x 7/8 5 x 5/8-11 7 x 7/8 7 x 5/8-11
MAX RPM PCS/BOX
11,000 11,000 12,000 12,000 6,500 6,500
10 10 10 10 5 5
MAX RPM PCS/BOX
13,300 12,000 8,500
25/200 25/200 25/200
Requires heavy duty rubber backup pads.
METAL ALUMINUM OXIDE FLAP WHEELS METAL Ferrous Metals, Iron, Steel, Stainless Steel, Aluminum, Copper, Wood, Plastic and Fiberglass.
CONCRETE/STONE SILICON CARBIDE TURBO CUT™ DISC HARD BACK CONCRETE/STONE Stone, Cast Iron, NonFerrous Metals, Floor Coatings and Fiberglass.
T-27 PT. NUMBER
SPECS
HSP4516 HSP4524 HSP4536 HSP5016 HSP5024 HSP5036 HSP7016 HSP7024 HSP7036
4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8
GRIT
C16 C24 C36 C16 C24 C36 C16 C24 C36
MAX RPM PCS/BOX
13,300 13,300 13,300 12,000 12,000 12,000 8,500 8,500 8,500
HEAVY DUTY RUBBER BACKUP PADS FOR TURBO CUT™ DISCS
PT. NUMBER
SPECS
BPFTC45 BPFTC50 BPFTC70
4-1/2 x 5/8-11 Center nut 5 x 5/8-11 Center nut 7 x 5/8-11 Center nut
MAX RPM
13,300 12,000 8,600
25/200 25/200 25/200 25/200 25/200 25/200 25/200 25/200 25/200
PT. NUMBER
SPECS
GRIT
MAX RPM PCS/BOX
FL13460* FL13480* FL134120* FL134180* FL11040* FL11060* FL11080* FL110120* FL110180* FL11260* FL11280* FL112120* FL112180* FL21040* FL21060* FL21080* FL210120* FL210180* FL21260* FL21280* FL212120* FL212180* FL31060* FL31080* FL310120* FL310180* FL61060 FL61080 FL610120 FL62060 FL62080 FL620120
1 x 3/4 1 x 3/4 1 x 3/4 1 x 3/4 1x1 1x1 1x1 1x1 1x1 1-1/2 x 1 1-1/2 x 1 1-1/2 x 1 1-1/2 x 1 2x1 2x1 2x1 2x1 2x1 2-1/2 x 1 2-1/2 x 1 2-1/2 x 1 2-1/2 x 1 3x1 3x1 3x1 3x1 6x1x1 6x1x1 6x1x1 6x2x1 6x2x1 6x2x1
A60 A80 A120 A180 A40 A60 A80 A120 A180 A60 A80 A120 A180 A40 A60 A80 A120 A180 A60 A80 A120 A180 A60 A80 A120 A180 A60 A80 A120 A60 A80 A120
25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 6,000 6,000 6,000 6,000 6,000 6,000
*With 1/4 shank
34
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
ABRASIVES
SURFACE PREPARATION
APPLICATIONS: - SURFACE PREPARATION BEFORE COATING AND PAINTING - REMOVE RUST, PAINT AND OXIDATION - REMOVE WELD DISCOLORATION - CLEAN TOOLS AND ENGINE PARTS BENEFITS: - FAST, CLEAN AND EASY TO USE - NON-LOADING - DOES NOT GOUGE, MARK OR SCRATCH BASE MATERIAL
METAL ALUMINUM OXIDE SURFACE PREPARATION WHEEL - MAROON METAL Ferrous Metals, Iron, Steel, Non-Ferrous, Sheet Metals, Copper, Stainless Steel.
T-27 METAL ALUMINUM OXIDE QUICKMOUNT™ MINI CONDITIONING DISCS METAL
PT. NUMBER
SPECS
NW4MF NW45MF NW45MFH NW7MF NW7MFH
4 x 5/8 4-1/2 x 7/8 4-1/2 x 5/8-11 7 x 7/8 7 x 5/8-11
GRIT
Fine Fine Fine Fine Fine
MAX RPM PCS/BOX
13,700 13,300 13,300 8,500 8,500
10 10 10 10 10
Ferrous Metals, Iron, Steel, Stainless Steel.
PT. NUMBER
SPECS
GRIT
NON-WOVEN DISCS NW2CQ 2" Coarse / Brown NW2MQ 2" Medium / Maroon NW2FQ 2" Fine / Blue NW3CQ 3" Coarse / Brown NW3MQ 3" Medium / Maroon NW3FQ 3" Fine / Blue LAMINATED CLOTH DISCS CD2024Q 2" A24 / Black CD2036Q 2" A36 / Brown CD2050Q 2" A50 / Green CD2060Q 2" A60 / Orange CD2080Q 2" A80 / Yellow CD2100Q 2" A100 / Blue CD2120Q 2" A120 / White CD3024Q 3" A24 / Black CD3036Q 3" A36 / Brown CD3050Q 3" A50 / Green CD3060Q 3" A60 / Orange CD3080Q 3" A80 / Yellow CD3100Q 3" A100 / Blue CD3120Q 3" A120 / White
MAX RPM PCS/BOX
20,000 20,000 20,000 18,000 18,000 18,000
50 50 50 25 25 25
20,000 20,000 20,000 20,000 20,000 20,000 20,000 18,000 18,000 18,000 18,000 18,000 18,000 18,000
50 50 50 50 50 50 50 25 25 25 25 25 25 25
NON-FERROUS SILICON CARBIDE SURFACE PREPARATION WHEEL - GREY NON-FERROUS Stone, Glass, Plastic, Bronze, Ceramics.
T-27 PT. NUMBER
SPECS
NW4GSF NW45GSF NW45GSFH NW7GSF NW7GSFH
4 x 5/8 4-1/2 x 7/8 4-1/2 x 5/8-11 7 x 7/8 7 x 5/8-11
GRIT
Super Fine Super Fine Super Fine Super Fine Super Fine
MAX RPM PCS/BOX
13,700 13,300 13,300 8,500 8,500
10 10 10 10 10
QUICKMOUNT™ BACKUP PADS FOR CONDITIONING DISCS WITH 1/4 SHANK PART NO.
SIZE
BPMX02Q 2" Backup Pad w/ shank BPMX03Q 3" Backup Pad w/ shank BPMXSHNK Shank for Backup Pad
35
ABRASIVES
FIBER DISCS
FIBER DISCS - COATED ABRASIVES Pearl fiber discs have been engineered using the latest in electrostatic grain placement technology. Designed for blending, sanding and finish work. Pearl fiber discs are available in a variety of grits, grains and sizes. These discs feature a special mix of grain for high performance and life.
METAL
METAL
METAL/STAINLESS STEEL
ALUMINUM OXIDE SILVER LINE™
ALUMINUM OXIDE PREMIUM
ZIRCONIA HEAVY DUTY
METAL
METAL
Ferrous Metals, Iron, Steel, Sheet Metals.
Ferrous Metals, Iron, Steel, Sheet Metals.
PT. NUMBER SPECS
FD4016X FD4024X FD4036X FD4050X FD4060X FD4080X FD4100X FD4120X FD4516X FD4524X FD4536X FD4550X FD4560X FD4580X FD45100X FD45120X FD5016X FD5024X FD5036X FD5050X FD5060X FD5080X FD5100X FD5120X FD7016X FD7024X FD7036X FD7050X FD7060X FD7080X FD7100X FD7120X FD9016X FD9024X FD9036X FD9050X FD9060X FD9080X FD9100X FD9120X
36
4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8
GRIT MAX RPMPCS/BOX
A16 A24 A36 A50 A60 A80 A100 A120 A16 A24 A36 A50 A60 A80 A100 A120 A16 A24 A36 A50 A60 A80 A100 A120 A16 A24 A36 A50 A60 A80 A100 A120 A16 A24 A36 A50 A60 A80 A100 A120
15,000 15,000 15,000 15,000 15,000 15,000 15,000 15,000 13,000 13,000 13,000 13,000 13,000 13,000 13,000 13,000 11,900 11,900 11,900 11,900 11,900 11,900 11,900 11,900 8,550 8,550 8,550 8,550 8,550 8,550 8,550 8,550 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
PT. NUMBER SPECS
FD4016G FD4024G FD4036G FD4050G FD4060G FD4080G FD4100G FD4120G FD4516G FD4524G FD4536G FD4550G FD4560G FD4580G FD45100G FD45120G FD5024G FD5036G FD5050G FD5060G FD5080G FD5100G FD5120G FD7016G FD7024G FD7036G FD7050G FD7060G FD7080G FD7100G FD7120G FD9016G FD9024G FD9036G FD9050G FD9060G FD9080G FD9100G FD9120G
4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4 x 5/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8
METAL/ STAINLESS STEEL Ferrous Metals, Iron, Steel, Sheet Metals, Stainless Steel.
GRIT MAX RPMPCS/BOX
A16 A24 A36 A50 A60 A80 A100 A120 A16 A24 A36 A50 A60 A80 A100 A120 A24 A36 A50 A60 A80 A100 A120 A16 A24 A36 A50 A60 A80 A100 A120 A16 A24 A36 A50 A60 A80 A100 A120
15,000 15,000 15,000 15,000 15,000 15,000 15,000 15,000 13,000 13,000 13,000 13,000 13,000 13,000 13,000 13,000 11,900 11,900 11,900 11,900 11,900 11,900 11,900 8,550 8,550 8,550 8,550 8,550 8,550 8,550 8,550 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500
25 50 50 50 50 50 25 25 25 50 50 50 50 50 25 25 50 50 50 50 50 25 25 25 50 50 50 50 50 25 25 25 50 50 50 50 50 25 25
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
PT. NUMBER SPECS
FZ4524 FZ4536 FZ4550 FZ4560 FZ4580 FZ5024 FZ5036 FZ5050 FZ5060 FZ5080 FZ7016 FZ7024 FZ7036 FZ7050 FZ7060 FZ7080 FZ9024 FZ9036 FZ9050 FZ9060 FZ9080
4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 4-1/2 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8 9 x 7/8
GRIT MAX RPMPCS/BOX
Z24 Z36 Z50 Z60 Z80 Z24 Z36 Z50 Z60 Z80 Z16 Z24 Z36 Z50 Z60 Z80 Z24 Z36 Z50 Z60 Z80
13,000 13,000 13,000 13,000 13,000 11,900 11,900 11,900 11,900 11,900 8,550 8,550 8,550 8,550 8,550 8,550 6,500 6,500 6,500 6,500 6,500
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
ABRASIVES
FIBER DISCS
FIBERGLASS SILICON CARBIDE SPECIAL DESIGN
FIBERGLASS SILICON CARBIDE
FIBERGLASS
FIBERGLASS Concrete, Non-Ferrous Metals.
PT. NUMBER
SPECS
GRIT
FDS5016 FDS5024 FDS5036 FDS7016 FDS7024 FDS7036
5 x 7/8 5 x 7/8 5 x 7/8 7 x 7/8 7 x 7/8 7 x 7/8
C16 C24 C36 C16 C24 C36
MAX RPM PCS/BOX
11,900 11,900 11,900 8,550 8,550 8,550
25 25 25 25 25 25
PT. NUMBER
SPECS
GRIT
DISCS/BOX
SANDING AND GRINDING NSAD85080 8-1/2 NSAD85100 8-1/2 NSAD85120 8-1/2 NSAD85150 8-1/2 NSAD85180 8-1/2 NSAD85220 8-1/2 NSAD85320 8-1/2
C-80 C-100 C-120 C-150 C-180 C-220 C-320
50 50 50 50 50 50 50
POLISHING LCCD85400 LCCD85500 LCCD85600
C-400 C-500 C-600
50 50 50
AND FINISHING 8-1/2 8-1/2 8-1/2
BACKUP PADS FOR FIBER DISCS SPIRAL-FACED
SMOOTH-FACED
PT. NUMBER
SPECS
MAX RPM
BP0410S BP4514S BP4558S BP5058S BP7058S BP9058S
4 x M10 x 1.25 Center Nut
20,000
4-1/2 x M14 x 2.0 Center Nut
20,000
4-1/2 x 5/8-11 Center Nut
20,000
5 x 5/8-11 Center Nut
20,000
7 x 5/8-11 Center Nut
10,000
9 x 5/8-11 Center Nut
9,000
PT. NUMBER
SPECS
BP0410 BP4558 BP5058 BP7058 BP9058
4 x M10 x 1.25 Center Nut
MAX RPM 20,000
4-1/2 x 5/8-11 Center Nut
20,000
5 x 5/8-11 Center Nut
20,000
7 x 5/8-11 Center Nut
10,000
9 x 5/8-11 Center Nut
9,000
37
FIBER DISCS - COATED ABRASIVES FIL-FREE DISCS
ABRASIVES
FIL-FREE DISCS Pearl’s fil-free discs are ideally suited for sanding and finishing a variety of surfaces. Available in a variety of grits, grains and backing weights. Use for sanding wood, paint, fiberglass, body filler and ferrous and non-ferrous metals.
38
METAL
METAL
ALUMINUM OXIDE LIGHT WEIGHT BACKING
ALUMINUM OXIDE HEAVY DUTY
PRESSURE SENSITIVE
PRESSURE SENSITIVE
METAL
METAL
Ferrous Metals, Iron, Steel.
Ferrous Metals, Iron, Steel.
PT. NUMBER
SPECS
GRIT
DISCS/ROLL
PDR5080 PDR5100 PDR5120 PDR5150 PDR5180 PDR5220 PDR5240 PDR5280 PDR5320 PDR6080 PDR6100 PDR6120 PDR6150 PDR6180 PDR6220 PDR6240 PDR6280 PDR6320 PDR6400
5" 5" 5" 5" 5" 5" 5" 5" 5" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6"
A80 A100 A120 A150 A180 A220 A240 A280 A320 A80 A100 A120 A150 A180 A220 A240 A280 A320 A400
125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125
PT. NUMBER
SPECS
GRIT
DISCS/BOX
PD5040 PD5060 PD5080 PD5100 PD5120 PD5150 PD5180 PD5220 PD5240 PD5280 PD5320 PD5400 PD6040 PD6060 PD6080 PD6100 PD6120 PD6150 PD6180 PD6220 PD6240 PD6280 PD6320 PD6400
5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6"
A40 A60 A80 A100 A120 A150 A180 A220 A240 A280 A320 A400 A40 A60 A80 A100 A120 A150 A180 A220 A240 A280 A320 A400
100 100 100 100 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
FIL-FREE DISCS RESIN CLOTH BELTS
ABRASIVES
RESIN CLOTH BELTS METAL ALUMINUM OXIDE PREMIUM
Pearl’s cloth belts are engineered for use on belt sanding machines. Designed for extra long life and performance. Available in a multitude of lengths, widths and grits to handle a variety of sanding needs. Use on ferrous metals, wood, fiberglass and plastics.
METAL Ferrous Metals, Iron, Steel.
PT. NUMBER SPECS
CB13024 CB13036 CB13040 CB13050 CB13060 CB13080 CB130100 CB130120 CB14240 CB14250 CB14260 CB14280 CB142100 CB142120 CB142180 CB142240 CB142320 CB11836 CB11840 CB11850 CB11860 CB11880 CB118100 CB118120 CB11224 CB11236 CB11240 CB11250 CB11260 CB11280 CB112100 CB112120
1 x 30 1 x 30 1 x 30 1 x 30 1 x 30 1 x 30 1 x 30 1 x 30 1 x 42 1 x 42 1 x 42 1 x 42 1 x 42 1 x 42 1 x 42 1 x 42 1 x 42 1-1/8 x 21 1-1/8 x 21 1-1/8 x 21 1-1/8 x 21 1-1/8 x 21 1-1/8 x 21 1-1/8 x 21 1-1/2 x 60 1-1/2 x 60 1-1/2 x 60 1-1/2 x 60 1-1/2 x 60 1-1/2 x 60 1-1/2 x 60 1-1/2 x 60
GRIT PCS/BOX
A24 A36 A40 A50 A60 A80 A100 A120 A40 A50 A60 A80 A100 A120 A180 A240 A320 A36 A40 A50 A60 A80 A100 A120 A24 A36 A40 A50 A60 A80 A100 A120
10/400 10/400 10/400 10/400 10/400 10/400 10/400 10/400 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300 10/300
PT. NUMBER SPECS
CB24840 CB24850 CB24860 CB24880 CB248100 CB248120 CB248180 CB248240 CB248320 CB26024 CB26036 CB26040 CB26050 CB26060 CB26080 CB260100 CB260120 CB31824 CB31836 CB31840 CB31850 CB31860 CB31880 CB318100 CB318120 CB32124 CB32136 CB32140 CB32150 CB32160 CB32180 CB321100 CB321120 CB321150 CB32424 CB32436 CB32440 CB32450 CB32460 CB32480 CB324100 CB324120 CB324150
2 x 48 2 x 48 2 x 48 2 x 48 2 x 48 2 x 48 2 x 48 2 x 48 2 x 48 2 x 60 2 x 60 2 x 60 2 x 60 2 x 60 2 x 60 2 x 60 2 x 60 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 18 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 21 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24 3 x 24
GRIT PCS/BOX
A40 A50 A60 A80 A100 A120 A180 A240 A320 A24 A36 A40 A50 A60 A80 A100 A120 A24 A36 A40 A50 A60 A80 A100 A120 A24 A36 A40 A50 A60 A80 A100 A120 A150 A24 A36 A40 A50 A60 A80 A100 A120 A150
10/200 10/200 10/200 10/200 10/200 10/200 10/200 10/200 10/200 10/200 10/200 10/200 10/200 10/200 10/200 10/200 10/200 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100
PT. NUMBER SPECS
CB42424 CB42436 CB42440 CB42450 CB42460 CB42480 CB424100 CB424120 CB424150 CB43640 CB43650 CB43660 CB43680 CB436100 CB436120 CB436180 CB436240 CB436320 CB64840 CB64850 CB64860 CB64880 CB648100 CB648120 CB648180 CB648240 CB648320
4 x 24 4 x 24 4 x 24 4 x 24 4 x 24 4 x 24 4 x 24 4 x 24 4 x 24 4 x 36 4 x 36 4 x 36 4 x 36 4 x 36 4 x 36 4 x 36 4 x 36 4 x 36 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48 6 x 48
GRIT PCS/BOX
A24 A36 A40 A50 A60 A80 A100 A120 A150 A40 A50 A60 A80 A100 A120 A180 A240 A320 A40 A50 A60 A80 A100 A120 A180 A240 A320
10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100 10/100
39
RESIN CLOTH BELTS SHOP ROLLS
ABRASIVES
SHOP ROLLS METAL ALUMINUM OXIDE PREMIUM The Pearl shop roll is for use on a variety of small sanding jobs. Premium quality grains and J-weight cloth backing have been designed for long lasting performance. Use on ferrous metals, high tensile steel, iron, non-ferrous metals, aluminum and copper. Also use on wood and fiberglass.
METAL Ferrous Metals, Iron, Steel.
PT. NUMBER
SPECS
SR1040 SR1050 SR1060 SR1080 SR1100 SR1120 SR1150 SR1180 SR1240 SR1320
1 x 50 yds. 1 x 50 yds. 1 x 50 yds. 1 x 50 yds. 1 x 50 yds. 1 x 50 yds. 1 x 50 yds. 1 x 50 yds. 1 x 50 yds. 1 x 50 yds.
GRIT
A40 A50 A60 A80 A100 A120 A150 A180 A240 A320
PT. NUMBER
SPECS
SR2040 SR2050 SR2060 SR2080 SR2100 SR2120 SR2150 SR2180 SR2220 SR2240 SR2320 SR2400
1-1/2 x 50 yds. 1-1/2 x 50 yds. 1-1/2 x 50 yds. 1-1/2 x 50 yds. 1-1/2 x 50 yds. 1-1/2 x 50 yds. 1-1/2 x 50 yds. 1-1/2 x 50 yds. 1-1/2 x 50 yds. 1-1/2 x 50 yds. 1-1/2 x 50 yds. 1-1/2 x 50 yds.
GRIT
A40 A50 A60 A80 A100 A120 A150 A180 A220 A240 A320 A400
PT. NUMBER
SPECS
SR3040 SR3050 SR3060 SR3080 SR3100 SR3120 SR3150 SR3180 SR3220 SR3240 SR3280 SR3320 SR3400
2 x 50 yds. 2 x 50 yds. 2 x 50 yds. 2 x 50 yds. 2 x 50 yds. 2 x 50 yds. 2 x 50 yds. 2 x 50 yds. 2 x 50 yds. 2 x 50 yds. 2 x 50 yds. 2 x 50 yds. 2 x 50 yds.
GRIT
A40 A50 A60 A80 A100 A120 A150 A180 A220 A240 A280 A320 A400
See pg. 27
See pg. 19
40
See pg. 27
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
SHOP ROLLS SANDPAPER SHEETS
ABRASIVES
SANDPAPER 9 X 11 IN. SHEETS - WATERPROOF Pearl’s high quality sanding sheets have been engineered using the most sophisticated production techniques to ensure consistent finishing and extra long life. Use on wood, fillers, sealers, ferrous and non-ferrous metals. Use also for body shop work when sanding paint, varnish, plastics, fiberglass, marbles, ceramics, ferrous and non-ferrous metals.
GENERAL PURPOSE
GENERAL PURPOSE
GENERAL PURPOSE
SILICON CARBIDE SILVER LINE™
SILICON CARBIDE PREMIUM
ALUMINUM OXIDE
GEN. PURPOSE
GEN. PURPOSE
Paint, Fillers, Sealers, Varnish, Plastics, Fiberglass, Marbles, Ceramics, Ferrous and Non-Ferrous Metals.
Paint, Fillers, Sealers, Varnish, Plastics, Fiberglass, Marbles, Ceramics, Ferrous and Non-Ferrous Metals.
PT. NUMBER
SPECS
GRIT
LCCS060T LCCS080T LCCS100T LCCS120T LCCS150T LCCS180T LCCS220T LCCS240T LCCS280T LCCS320T LCCS360T LCCS400T LCCS500T LCCS600T LCCS800T LCC1000T
9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11
C60 C80 C100 C120 C150 C180 C220 C240 C280 C320 C360 C400 C500 C600 C800 C1000
SHTS/SLV
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
GEN. PURPOSE Wood, Fillers, Sealers, Ferrous and Non-Ferrous Metals.
PT. NUMBER
SPECS
GRIT
LCCS0080 LCCS0100 LCCS0120 LCCS0150 LCCS0180 LCCS0220 LCCS0240 LCCS0280 LCCS0320 LCCS0360 LCCS0400 LCCS0500 LCCS0600 LCCS0800 LCCS1000 LCCS1200 LCCS1500 LCCS2000
9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11
C80 C100 C120 C150 C180 C220 C240 C280 C320 C360 C400 C500 C600 C800 C1000 C1200 C1500 C2000
SHTS/SLV
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
PT. NUMBER
SPECS
GRIT
LACS0080 LACS0100 LACS0120 LACS0150 LACS0180 LACS0220 LACS0240 LACS0280 LACS0320 LACS0360
9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11 9 x 11
A80 A100 A120 A150 A180 A220 A240 A280 A320 A360
SHTS/SLV
50 50 50 50 50 50 50 50 50 50
41
E X C I T I N G
10MM RIM
NEW
10" P2 PRO-V™ GENERAL PURPOSE FLAT CORE TURBO BLADE
DIAMOND PRODUCTS
PT. NUMBER SPECS
PV010T
MAX RPM
10 x .095 x 7/8, ◊, 5/8 6,100
P4™ MULTI-CUT RESCUE/ UTILITY BLADE 10MM RIM
EXCELLENT FOR METAL STUDS AND DUCTILE IRON! PROVIDES UP TO 100X MORE LIFE THAN TRADITIONAL ABRASIVE WHEELS WHEN CUTTING METALS!
10" P2 PRO-V™ GENERAL PURPOSE SEGMENTED BLADE PT. NUMBER SPECS
PV010S
BENEFITS: - EXTRA LONG LIFE - FAST CLEAN CUT - 12" TO 16" BLADES HAVE DIAMOND ELECTROPLATED SIDE PROTECTION WHICH PROTECTS THE CORE, REDUCES HEAT AND PREVENTS BINDING - VACUUM BRAZED TECHNOLOGY FUSED TO STEEL CORE FOR PROTECTION, DURABILITY AND HEAT RESISTANCE - DESIGNED TO BE USED ON A VARIETY OF MATERIALS - EXCELLENT FOR EMERGENCY SITUATIONS - DRY CUTTING PT. NUMBER
SPECS
MAX RPM
DIA045MC DIA005MC DIA007MC DIA012MC DIA014MC DIA016MC
4-1/2 x .080 x 7/8, 5/8 5 x .080 x 7/8, 5/8 7 x .095 x 7/8, ◊, 5/8 12 x .125 x 1, 20mm w/ side protection 14 x .125 x 1, 20mm w/ side protection 16 x .125 x 1, 20mm w/ side protection
13,000 12,000 8,730 6,115 5,500 3,820
For Metal Studs, Ductile Iron, Concrete, Asphalt, Masonry, Steel, Stainless Steel, Aluminum, Stucco, Tile Backer Board, Roof Tile, Corrugated Roofing, PVC, Plastic, Wood, Pipe, Dry Wall, Rebar.
MAX RPM
10 x .095 x 7/8, ◊, 5/8 6,100
MASONRY & CONCRETE DRY CORE BITS PT. NUMBER
SPECS
HB100CDP HB112CDP HB200CDP HB212CDP HB300CDP HB312CDP HB400CDP HB500CDP HB600CDP
1 x 10 x 5/8-11 1-1/2 x 10 x 5/8-11 2 x 10 x 5/8-11 2-1/2 x 10 x 5/8-11 3 x 10 x 5/8-11 3-1/2 x 10 x 5/8-11 4 x 10 x 5/8-11 5 x 10 x 5/8-11 6 x 10 x 5/8-11
MAX RPM
6,000 5,000 5,000 5,000 5,000 5,000 5,000 3,500 2,500
10" & 12" CONCRETE WET CORE BITS
VBT™ VACUUM BRAZED TECHNOLOGY VBT™ allows for more diamond particles to be exposed on the core. This exposure produces the aggressive cutting action.
42
PT. NUMBER
SPECS
HB1000L14PB HB1200L14PB
10 x 14 x 1-1/4 x 7 12 x 14 x 1-1/4 x 7
MAX RPM
400 330
DIAMONDS
NOTICE ANYTHING DIFFERENT?
NEW LOOK
OLD LOOK Pearl’s new look, improved products and new products combine traditional quality, consistency and unique products with a better-than-ever cost-performance value. Pearl’s strong brand is getting a refreshing new look, from product art design, to uniform packaging, to a new product hierarchy blade grade system. The new blade grade system is consistent, logical and easy to understand by using color codes, standardized descriptions and graphics.
NOW MORE THAN EVER,PEARL IS AN EXCELLENT CHOICE. ACCEPT NO IMITATIONS! EASY TO UNDERSTAND PRODUCT HIERARCHY GOOD
P1 EXV™
BETTER
P2 PRO-V™
P3™
BEST
P4™
✓ ✓ ✓ ✓ ✓
NEW PRODUCTS IMPROVED PRODUCTS NEW UNIFORM LOOK BETTER GRAPHICS BETTER AND CONSISTENT PACKAGING
P5™
43
WAVED-CORE TURBO RIM BLADES TURBO RIM BLADES
DIAMONDS
TURBO RIM BLADES GENERAL PURPOSE WAVED CORE TURBO - ORIGINAL “SUPER DRY” For Concrete, Block, Brick, Natural Stone, Granite, Marble, Refractory Material, Soft Stone, Sand Stone.
WHY PEARL WAVED TURBO?
1
2
Wave design features add stability to the steel core, thus eliminating warping problems.
The waved-core allows air to be drawn in through the matrix and across the core, reducing friction keeping the core cool.
3
Waved Turbo
While the blade is cutting, the debris (swarf) is removed from the cutting path via the wavedcore thus extending the life of the blade.
Air Wave design adds stability to steel core.
Swarf Regular Turbo
P4™ K O
10mm rim
MAX RPM
13,700 13,300 12,200 8,500
8mm rim
PT. NUMBER SPECS
DIA04SDA DIA004SD DIA045SD DIA005SD DIA006SD DIA007SD DIA008SD DIA009SD DIA010SD DIA012SD
4 x .070 x 7/8, 5/8 4 x .070 x 20mm, 5/8 4-1/2 x .080 x 7/8, 5/8 5 x .080 x 7/8, 5/8 6 x .080 x 7/8, ◊, 5/8 7 x .080 x 7/8, ◊, 5/8 8 x .080 x ◊, 5/8 9 x .080 x 7/8, 5/8 10 x .080 x ◊, 5/8 12 x .125 x 1
MAX RPM
13,700 13,700 13,300 12,200 10,200 8,500 6,800 6,600 6,100 6,300
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
OLD LO OK
44
4 x .070 x 20mm, 5/8 4-1/2 x .080 x 7/8, 5/8 5 x .080 x 7/8, 5/8 7 x .080 x 7/8, ◊, 5/8
8MM RIM
OLD LO OK
DIA04SDZ DIA45SDZ DIA05SDZ DIA07SDZ
K O
8mm rim
OLD LO OK
PT. NUMBER SPECS
LO
8MM RIM
NE W
LO
10MM RIM
P5™ NE W
K O
NE W
LO
P3™
PT. NUMBER SPECS
DIA04SDG DIA45SDG DIA05SDG DIA07SDG DIA08SDG DIA10SDG
4 x .070 x 20mm, 5/8 4-1/2 x .080 x 7/8, 5/8 5 x .080 x 7/8, 5/8 7 x .080 x 7/8, ◊, 5/8 8 x .080 x ◊, 5/8 10 x .080 x ◊, 5/8
MAX RPM
13,700 13,300 12,200 8,500 6,800 6,100
WAVED-CORE TURBO RIM BLADES TURBO RIM BLADES
DIAMONDS
GENERAL PURPOSE FLAT CORE TURBO For Concrete, Block, Brick, Natural Stone, Granite, Marble, Refractory Material, Soft Stone, Sand Stone.
P3™ K O
LO
12MM RIM
NE W
LO
10MM RIM
P4™ K O
12MM RIM
NE W
P2 PRO-V™
10mm rim
10mm rim
PV004T PV045T PV005T PV007T NEW! PV010T
MAX RPM
4 x .080 x 20mm, 5/8 4-1/2 x .080 x 7/8, 5/8 5 x .080 x 7/8, 5/8 7 x .090 x 7/8, ◊, 5/8 10 x .095 x 7/8, ◊, 5/8
13,700 13,300 12,200 8,500 6,100
PT. NUMBER SPECS
DIA004BL DIA045BL DIA005BL DIA007BL DIA008BL DIA010BL
MAX RPM
4 x .070 x 20mm, 5/8 4-1/2 x .080 x 7/8, 5/8 5 x .080 x 7/8, 5/8 7 x .080 x 7/8, ◊, 5/8 8 x .080 x ◊, 5/8 10 x .080 x ◊, 5/8
13,700 13,300 12,200 8,500 6,800 6,100
OLD LO OK
OLD LO OK
PT. NUMBER SPECS
PT. NUMBER SPECS
DIA004EC DIA045EC DIA005EC DIA007EC DIA008EC DIA010EC DIA012EC
4 x .070 x 20mm, 5/8 4-1/2 x .080 x 7/8, 5/8 5 x .080 x 7/8, 5/8 7 x .080 x 7/8, ◊, 5/8 8 x .080 x ◊, 5/8 10 x .080 x ◊, 5/8 12 x .110 x 1
MAX RPM
13,700 13,300 12,200 8,500 6,800 6,100 6,300
GENERAL PURP0SE HIGH SPEED TURBO For Block, Hard Brick, Paver Bricks, Reinforced Concrete, Concrete, Refractory Material, Soft Stone, Sand Stone.
P2 PRO-V™
P4™ 12MM RIM
PT. NUMBER SPECS
PV1212HS 12 x .125 x 1, 20mm PV1212HS2 12 x .125 x 20mm PV1412HS 14 x .125 x 1, 20mm PV1412HS2 14 x .125 x 20mm
12MM RIM
MAX RPM
6,300 6,300 5,400 5,400
PT. NUMBER SPECS
DIA1212HS DIA1212HS2 DIA1412HS DIA1412HS2
12 x .125 x 1, 20mm 12 x .125 x 20mm 14 x .125 x 1, 20mm 14 x .125 x 20mm
MAX RPM
6,300 6,300 5,400 5,400
45
TURBO RIM BLADES SEGMENTED BLADES
DIAMONDS
SEGMENTED BLADES GENERAL PURPOSE For Concrete, Block, Brick, Natural Stone, Refractory Material, Soft Stone, Sand Stone.
P5™
K O
LO
12MM RIM
K O
12MM RIM
NE W
10MM RIM
LO
P4™ NE W
P2 PRO-V™
10mm rim
10mm rim
MAX RPM
PT. NUMBER SPECS
MAX RPM
DIA04CSP
4 x .070 x 20mm, 5/8 13,700
DIA045CP
4-1/2 x .080 x 7/8, 5/8 13,300
DIA45CSP
4-1/2 x .080 x 7/8, 5/8 13,300
12,200
DIA005CP
5 x .080 x 7/8, 5/8
12,200
DIA05CSP
5 x .080 x 7/8, 5/8
8,500
DIA007CP
7 x .080 x 7/8, ◊, 5/8
8,500
DIA07CSP
7 x .080 x 7/8, ◊, 5/8
8,500
10 x .095 x 7/8, ◊, 5/8 6,100
DIA008CP
8 x .080 x ◊, 5/8
6,800
DIA08CSP
8 x .080 x ◊, 5/8
6,800
4 x .080 x 20mm, 5/8 13,700
PV045S
4-1/2 x .080 x 7/8, 5/8 13,300
PV005S
5 x .080 x 7/8, 5/8
PV007S
7 x .090 x 7/8, ◊, 5/8
DIA004CP
MAX RPM
4 x .070 x 20mm, 5/8 13,700
PV004S
NEW! PV010S
PT. NUMBER SPECS
OLD LO OK
OLD LO OK
PT. NUMBER SPECS
12,200
CONCRETE AND MASONRY For Concrete, Reinforced Concrete, Masonry, Brick, Block, Paver Bricks, Hard Brick, Refractory Material, Soft Stone, Sand Stone. 15MM RIM
K O
12mm rim
PT. NUMBER SPECS PV1212XL
MAX RPM
12 x .125 x 1, 20mm
PT. NUMBER SPECS
MAX RPM
MAX RPM
10 x .080 x ◊, 5/8
6,100
LW1212CSP
6,100
LW1212CSP2 12 x .125 x 20mm
6,300
PV1212XL2 12 x .125 x 20mm
6,300
LW1008CPA 10 x .080 x 1, 5/8
5,400
PV1412XL
5,400
LW1211CP
EXV1412XL2 14 x .125 x 20mm
5,400
PV1412XL2 14 x .125 x 20mm
5,400
LW1211CP2 12 x .110 x 20mm
PV1612XL
4,700
LW1212CP
12 x .110 x 1, 20mm 6,300
PV1812XL
18 x .125 x 1
3,400
LW1212CP2 12 x .125 x 20mm
PV2014XL
20 x .140 x 1
3,000
LW1411CP LW1412CP
6,300
14 x .125 x 1, 20mm 5,400
LW1412CSP2 14 x .125 x 20mm
5,400
6,300
14 x .110 x 1, 20mm 5,400 5,400
NEW!
PGS. 86-88
14 x .125 x 1, 20mm 5,400
LW1412CP2 14 x .125 x 20mm LW1612CP
6,300
LW1412CSP
12 x .125 x 1, 20mm 6,300
12 x .125 x 1, 20mm 6,300
LW1411CP2 14 x .110 x 20mm
46
SPECS
LW1008CP
EXV1212XL2 12 x .125 x 20mm
16 x .125 x 1, 20mm
PT. NUMBER
6,300
EXV1412XL 14 x .125 x 1, 20mm
14 x .125 x 1, 20mm
OLD LO OK
6,300
12mm rim
OLD LO OK
MAX RPM
EXV1212XL 12 x .125 x 1, 20mm
15MM RIM
K O
12mm rim
OLD LO OK
PT. NUMBER SPECS
P5™ LO
P4™ NE W
12MM RIM
NE W
P2 PRO-V™
LO
12MM RIM
K O
NE W
LO
P1 EXV™
5,400
16 x .125 x 1, 20mm 4,700
LW1612CP2 16 x .125 x 20mm
4,700
LW1812CP
18 x .125 x 1
3,400
LW2014CP
20 x .142 x 1
3,000
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
GAS POWERED CONCRETE SAWS
DIAMONDS
SEGMENTED BLADES
ASPHALT AND GREEN CONCRETE For Asphalt, Green Concrete, Abrasive Materials, Sand Stone, Soft Stone.
P2 PRO-V™
P4™
P5™ 12MM RIM
K O
12MM RIM
NE W
LO
10MM RIM
8mm rim
OLD LO OK
PT. NUMBER
SPECS
PV1212AGS PV1212AGS2 PV1412AGS PV1412AGS2
12 x .125 x 1, 20mm 12 x .125 x 20mm 14 x .125 x 1, 20mm 14 x .125 x 20mm
MAX RPM
6,300 6,300 5,400 5,400
PT. NUMBER
SPECS
LW1212AGP LW1212AGP2 LW1412AGP LW1412AGP2 LW1612AGP LW1812AGP
12 x .125 x 1, 20mm 12 x .125 x 20mm 14 x .125 x 1, 20mm 14 x .125 x 20mm 16 x .125 x 1, 20mm 18 x .125 x 1
MAX RPM
6,300 6,300 5,400 5,400 4,700 3,400
PT. NUMBER
SPECS
LW1212AGSP LW1212AGSP2 LW1412AGSP LW1412AGSP2 LW1612AGSP LW1812AGSP
12 x .125 x 1, 20mm 12 x .125 x 20mm 14 x .125 x 1, 20mm 14 x .125 x 20mm 16 x .125 x 1, 20mm 18 x .125 x 1
MAX RPM
6,300 6,300 5,400 5,400 4,700 3,400
HARD MATERIALS For Hard Brick, Paver Bricks, Concrete, Reinforced Concrete, Masonry, Brick, Block, Sand Stone, Natural Stone, Artificial Stone.
10MM RIM
K O
K O
15MM RIM
NE W
LO
12MM RIM
LO
P5™ NE W
P2 PRO-V™
10mm rim
15mm rim
SPECS
PV1009SDS PV1212SDS PV1212SDS2 PV1412SDS PV1412SDS2
10 x .095 x ◊, 5/8 12 x .125 x 1, 20mm 12 x .125 x 20mm 14 x .125 x 1, 20mm 14 x .125 x 20mm
MAX RPM
6,100 6,300 6,300 5,400 5,400
TO ORDER, CALL: U.S.A. 800-969-5561 •
PT. NUMBER SPECS
LW04NSP LW45NSP LW05NSP LW07NSP LW10NSP
MAX RPM
4 x .090 x 7/8, 5/8, 20mm 4-1/2 x .090 x 7/8, 5/8, 20mm 5 x .090 x 7/8, 5/8, 20mm 7 x .090 x 7/8, ◊, 5/8 10 x .100 x 1, 5/8
13,700 13,300 12,200 8,500 6,100
OLD LO OK
OLD LO OK
PT. NUMBER
PT. NUMBER SPECS
LW12NSP LW14NSP LW20NSP
CANADA 800-387-0008 • WWW.PEARLABRASIVE.COM
12 x .125 x 1, 20mm 14 x .125 x 1, 20mm 20 x .125 x 1
MAX RPM
6,300 5,400 3,000
47
SEGMENTED BLADES SEGMENTED BLADES
DIAMONDS
CONCRETE/ASPHALT COMBO BLADE
MASONRY
For Concrete, Reinforced Concrete, Masonry, Brick, Block, Paver Bricks, Hard Brick, Refractory Material, Soft Stone, Sand Stone, Asphalt, Green Concrete, Abrasive Materials.
For Brick, Block, Masonry, Hard Brick, Paver Bricks, Refractory Material, Sand Stone, Natural Stone, Artificial Stone.
P5™ LO
12MM RIM
NE W
LO
K O
K O
12MM RIM
NE W
P4™
10mm rim
OLD LO OK
OLD LO OK
12mm rim
PT. NUMBER
SPECS
LW1412CMB
14 x .125 x 1, 20mm
MAX RPM
PT. NUMBER
SPECS
5,400
LW1412BB
14 x .125 x 1, 20mm
MAX RPM
5,400
SPECIALTY BLADE MULTI-CUT RESCUE/UTILITY BLADE Metal Studs, Ductile Iron, Concrete, Asphalt, Masonry, Steel, Stainless Steel, Aluminum, Stucco, Tile Backer Board, Roof Tile, Corrugated Roofing, PVC, Plastic, Wood, Pipe, Dry Wall, Rebar.
EXCELLENT FOR METAL STUDS AND DUCTILE IRON! P4™
Pearl’s P4™ Multi-Cut Rescue/Utility blade is designed to cut a variety of materials, as well as to be used by Fire Fighters, Police and other Rescue units in emergencies. It is ideal for time sensitive situations and will provide a fast, efficient cut on many different materials such as ductile iron, metal studs, concrete, wood, steel doors, pad locks, plastic, PVC, roofing and much more. The P4™ Multi-Cut blade is engineered with a special Vacuum Brazed Technology™ on the rim and steel core for fast, clean cutting. The diamond particles are fused to the steel core for protection, added durability and heat resistance.
NEW!
BENEFITS: - EXTRA LONG LIFE - FAST CLEAN CUT
PROVIDES UP TO 100X MORE LIFE THAN TRADITIONAL ABRASIVE WHEELS WHEN CUTTING METALS!
- 12" TO 16" BLADES HAVE DIAMOND ELECTROPLATED SIDE PROTECTION WHICH PROTECTS THE CORE, REDUCES HEAT AND PREVENTS BINDING. - VACUUM BRAZED TECHNOLOGY™ FUSED TO STEEL CORE FOR PROTECTION, DURABILITY AND HEAT RESISTANCE - DESIGNED TO BE USED ON A VARIETY OF MATERIALS
48
PT. NUMBER
SPECS
MAX RPM
- EXCELLENT FOR EMERGENCY SITUATIONS
DIA045MC DIA005MC DIA007MC DIA012MC DIA014MC DIA016MC
4-1/2 x .080 x 7/8, 5/8 5 x .080 x 7/8, 5/8 7 x .095 x 7/8, ◊, 5/8 12 x .125 x 1, 20mm w/ side protection 14 x .125 x 1, 20mm w/ side protection 16 x .125 x 1, 20mm w/ side protection
13,000 12,000 8,730 6,115 5,500 3,820
- DRY CUTTING
VBT™ VACUUM BRAZED TECHNOLOGY VBT™ allows for more diamond particles to be exposed on the core. This exposure produces the aggressive cutting action.
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
DIAMONDS
SEGMENTED BLADES
TUCK POINT BLADES
P2 PRO-V™
P5™
K O
K O
12MM RIM
NE W
LO
12MM RIM
NE W
10MM RIM
LO
P4™
12mm rim
10mm rim
OLD LO OK
OLD LO OK
PT. NUMBER
PVTAK04 PVTAK45 PVTAK07
SPECS
MAX RPM
4 x .250 x 7/8, 5/8 13,700 4-1/2 x .250 x 7/8, 5/8 13,300 7 x .250 x 7/8, ◊, 5/8 8,500
PT. NUMBER
SPECS
TAK04PM TAK45PM TAK07PM
4 x .250 x 7/8, 5/8 13,700 4-1/2 x .250 x 7/8, 5/8 13,300 7 x .250 x 7/8, ◊, 5/8 8,500
MAX RPM
PT. NUMBER
SPECS
TAK04SP TAK45SP TAK07SP
4 x .250 x 7/8, 5/8 13,700 4-1/2 x .250 x 7/8, 5/8 13,300 7 x .250 x 7/8, ◊, 5/8 8,500
MAX RPM
SANDWICH TUCK POINT BLADE FASTER MORTAR REMOVAL
P4™ 10MM RIM
PT. NUMBER
SPECS
TAK45SW TAK05SW
4-1/2 x .250 x 7/8, 5/8 13,300 5 x .250 x 7/8, 5/8 12,200
MAX RPM
49
DIAMONDS
50
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
DIAMONDS
TILE AND STONE BLADES
TILE AND STONE BLADES GRANITE For Granite, Porcelain, Hard Tile, Natural Stone, Artificial Stone.
ADAPTERS
P3™
P5™K O
8MM RIM
NE W
LO
8MM RIM
GRANITE BLADE ADAPTER FOR FLUSH CUTTING 6mm rim
OLD LO OK
Improved granite blade adapter for flush cutting. Now with 8 flat head stainless screws. (4) 8-32 x 1/2" and (4) 6-32 x 3/8" PART NO.
SPECS
DADGR458
PT. NUMBER SPECS
MAX RPM
PT. NUMBER SPECS
MAX RPM
DIA04GRTE
4 x .090 x 7/8, 20mm, 5/8, 4-holes
13,700
DIA04GRT
4 x .070 x 20mm, 5/8
13,700
DIA45GRTE
4-1/2 x .090 x 7/8, 20mm, 5/8, 4-holes 13,300
DIA04GR4
4 x .070 x 20mm, 4-holes
13,700
DIA05GRTE
5 x .090 x 7/8, 20mm, 5/8, 4-holes
12,200
DIA45GRT
4-1/2 x .080 x 7/8, 5/8
13,300
DIA06GRTE
6 x .090 x 7/8, ◊, 5/8
10,200
DIA45GR4
4-1/2 x .080 x 20mm, 4-holes
13,300
DIA6GRTE4
6 x .090 x 7/8, 20mm, 5/8, 4-holes
10,200
DIA05GRT
5 x .080 x 7/8, 5/8
12,200
DIA07GRTE
7 x .090 x 7/8, ◊, 5/8
8,500
DIA05GR4
5 x .080 x 20mm, 4-holes
12,200
DIA7GRTE4
7 x .090 x 7/8, 20mm, 5/8, 4-holes
8,500
DIA06GRT
6 x .080 x 7/8, ◊, 5/8
10,200
DIA06GR4
6 x .080 x 20mm, 4-holes
10,200
DIA07GRT
7 x .080 x 7/8, ◊, 5/8
8,500
DIA07GR4
7 x .080 x 20mm, 4-holes
8,500
20mm to 5/8-11, 8 screws included DADGR458S (1) 8-32 x 1/2" flat head screw DADGR458SA (1) 6-32 x 3/8" flat head screw
ADAPTERS FOR DIAMOND BLADES PART NO.
PORCELAIN / GRANITE For Porcelain, Granite, Hard Tile, Natural Stone. K O
NE W
LO
P5™
6MM RIM
6mm rim
OLD LO OK
DAD158 DAD178 DAD120 DADD58S DAD04M DAD2058 DAD7858 DAD7814 DAD7815 DAD7820 DAD7838 DAD5811 DAD5811B DAD5811L
PT. NUMBER SPECS
DIA04SHD DIA45SHD DIA05SHD DIA07SHD DIA08SHD
4 x .060 x 20mm, 5/8 4-1/2 x .060 x 7/8, 5/8 5 x .060 x 7/8, 5/8 7 x .070 x 7/8, ◊, 5/8 8 x .070 x ◊, 5/8 Adap.
MAX RPM
SPECS
1 to 5/8 1 to 7/8 1 to 20mm Diamond to 5/8 Inner Flange for 4" Grinder 20mm to 5/8 7/8 to 5/8 7/8 to 14mm Threaded 7/8 to 15mm 7/8 to 20mm 7/8 to 3/8 7/8 to 5/8-11 Threaded (1/4" Shoulder) Adap. 7/8 to 5/8-11 Threaded (1/2" Shoulder) Adap. 7/8 to 5/8-11 Left Threaded (1/4" Shoulder) Adap.
13,700 13,300 12,200 8,500 6,800
51
TILE AND STONE BLADES TILE AND STONE BLADES
DIAMONDS
TILE For Tile, Ceramic Tile, Marble.
K O
NE W
10MM RIM
NE W
10MM RIM
P5™ K O
LO
P3™ LO
P2 PRO-V™
10MM RIM
4MM RIM 10mm rim
4mm rim
SPECS
PV004CT PV045CT
4 x .060 x 20mm, 5/8 13,700 4-1/2 x .060 x 7/8, 5/8 13,300
MAX RPM
PT. NUMBER
SPECS
DIA04CBL DIA45CBL
4 x .060 x 20mm, 5/8 13,700 4-1/2 x .060 x 7/8, 5/8 13,300
K O
MAX RPM
10MM RIM
NE W
LO
10MM RIM
OLD LO OK
OLD LO OK
PT. NUMBER
10mm rim
OLD LO OK
52
PT. NUMBER
SPECS
PV007CT PV008CT PV010CT
7 x .060 x 5/8 8 x .060 x 5/8 10 x .060 x 5/8
MAX RPM
8,500 6,800 6,100
PT. NUMBER
SPECS
DTL06B19 DTL07B19 DTL08B19 DTL10B19
6 x .060 x 5/8 7 x .060 x 5/8 8 x .060 x 5/8 10 x .060 x 5/8
MAX RPM
10,200 8,500 6,800 6,100
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
PT. NUMBER
SPECS
MAX RPM
DIA085* 3-3/8 x 15mm - Gen. Purpose 2,240 DIA04SMC 4 x .055 x 20mm, 5/8 13,700 *For 3/8" cordless saws.
TILE AND STONE BLADES TILE AND STONE BLADES
DIAMONDS
PORCELAIN For Porcelain, Extra Hard Tile, Ceramic Tile, Natural Stone, Granite, Hard Tile, Hard Ceramics.
P2 PRO-V™
P4™
P5™ K O
9MM RIM
NE W
LO
8MM RIM
8MM RIM
6mm rim
OLD LO OK
4 x .060 x 20mm, 5/8 13,700 4-1/2 x .060 x 7/8, 5/8 13,700
MAX RPM
PT. NUMBER
SPECS
MAX RPM
DTL04HPXL 4 x .060 x 20mm,7/8,5/8 13,700 DTL45HPXL 4-1/2 x .060 x 7/8 ,5/8 13,300
K O
8MM RIM
NE W
LO
8MM RIM
PT. NUMBER
DIA04HP
LO
SPECS
PV04PT PV45PT
SPECS
K O
9MM RIM
8mm rim
6mm rim
SPECS
PV07PT PV08PT PV10PT
7 x .060 x 5/8 8 x .060 x 5/8 10 x .060 x 5/8
MAX RPM
PT. NUMBER
SPECS
8,500 6,800 6,100
DTL07HPXL DTL08HPXL DTL10HPXL
7 x .060 x 5/8 8 x .060 x 5/8 10 x .060 x 5/8
SEE ALSO
MAX RPM
8,500 6,800 6,100
OLD LO OK
OLD LO OK
PT. NUMBER
MAX RPM
4 x .060 x 20mm,7/8,5/8 10,200
NE W
PT. NUMBER
PT. NUMBER
DTL07HP DTL08HP DTL10HP
SPECS
7 x .060 x 5/8 8 x .060 x 5/8 10 x .060 x 5/8
MAX RPM
8,500 6,800 6,100
PGS. 80-82
PROFESSIONAL TILE SAWS
53
TILE AND STONE BLADES TILE AND STONE BLADES
DIAMONDS
ELECTROPLATED MARBLE BLADES For Marble, Travertine, Soft Stone, Fiberglass.
PROFILE WHEELS P5™
P5™
LO
K O
K O
NE W
NE W
LO
K O
NE W
LO
P4™
OLD LO OK
OLD LO OK
OLD LO OK
Available in: PT. NUMBER SPECS
PY004SPF PY045SPF PY005SPF PY007SPF
MAX RPM
4 x 7/8, 20mm, 5/8 4-1/2 x 7/8, 20mm, 5/8 5 x 7/8, 5/8 7 x ◊, 5/8
13,700 13,300 12,200 8,500
PT. NUMBER SPECS
PY004 PY045 PY005 PY007 PY008
MAX RPM
4 x 20mm, 5/8 4-1/2 x 7/8, 5/8 5 x 7/8, 5/8 7 x 7/8, ◊, 5/8 8 x ◊, 5/8
13,700 13,300 12,200 8,500 6,800
GRANITE SPECIAL ELECTROPLATED PT. NUMBER SPECS
PRM06BE 6 x 5/8 - 45˚ bevel PRM06DU 6 x 5/8 - dupont 3/8 radius PRM06OG 6 x 5/8 - ogee style
TILE / MARBLE For Marble, Tile, Ceramic Tile, Travertine, Soft Stone.
MAX RPM
6,000 6,000 6,000
MARBLE ELECTROPLATED PT. NUMBER SPECS
P5™
K O
K O
5MM RIM
NE W
LO
5MM RIM
NE W
LO
P3™
PRE06BE PRE06DU PRE06OG
5mm rim
5mm rim
DIAM004 DIAM045 DIAM007
54
4 x .060 x 20mm, 5/8 4-1/2 x .060 x 7/8, 5/8 7 x .060 x 7/8, ◊, 5/8
MAX RPM
13,700 13,300 8,500
OLD LO OK
OLD LO OK
PT. NUMBER SPECS
PT. NUMBER SPECS
DIA004SH DIA045SH DIA005SH DIA006SH DIA007SH DIA008SH DIA010SH DIA10SH5
4 x .040 x 20mm, 5/8 4-1/2 x .040 x 7/8, 5/8 5 x .050 x 7/8, 5/8 6 x .050 x 7/8, ◊, 5/8 7 x .050 x 7/8, ◊, 5/8 8 x .050 x ◊, 5/8 10 x .060 x ◊, 5/8 10 x .060 x 5/8
MAX RPM
13,700 13,300 12,200 10,200 8,500 6,800 6,100 6,100
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
6 x 5/8 - 45˚ bevel 6 x 5/8 - dupont 3/8 radius 6 x 5/8 - ogee style
MAX RPM
6,000 6,000 6,000
SPECIALTY BLADES TILE AND STONE BLADES
DIAMONDS
GLASS TILE For Glass Tile, Sheet Glass.
P2 PRO-V™
DRESSING CONDITIONING STICKS
P5™ K O
7MM RIM
NE W
LO
7MM RIM
7mm rim
OLD LO OK
PT. NUMBER SPECS PT. NUMBER SPECS
PV07G PV08G PV10G
7 x .050 x 5/8 8 x .050 x 5/8 10 x .050 x 5/8
MAX RPM
8,500 6,800 6,100
PT. NUMBER SPECS
DTL10G
MAX RPM
10 x .048 x 5/8
TUNGSTEN CARBIDE SHARPENING WHEEL TYPE 27
GRANITE / MARBLE CONTOUR BLADES
For Backhoes, Trenchers, Excavators, Tillers, Shovels, Stump Grinders, Jackhammer Bits, Carbide Scrapers, Masonry Drill Bits.
For Granite, Marble, Stone, Concrete.
P5™ 8MM RIM
K O
NE W
LO
K O
NE W
LO
P4™
DCS82160 8 x 1-1/2 x 1-1/2 - C60
6,100
8mm rim
OLD LO OK
OLD LO OK
PT. NUMBER SPECS
SHW045H 4-1/2 x 5/8-11 T-27 PT. NUMBER SPECS
LWC04B LWC05B LWC06B
MAX RPM
4 x .100 x 7/8, 20mm, 5/8 13,700 5 x .100 x 7/8, 5/8 12,200 6 x .100 x 7/8, ◊, 5/8 10,200
PT. NUMBER SPECS
LWC04P LWC05P LWC06P LWC07P
4 x .160 x 20mm, 5/8 5 x .160 x 7/8, 5/8 6 x .160 x ◊, 5/8 7 x .160 x ◊, 5/8
MAX RPM
13,300
MAX RPM
13,700 12,200 10,200 8,500
55
SPECIALTY BLADES CRACK-CHASER™ BLADES
DIAMONDS
CRACK-CHASER™ BLADES FOR CLEANING, ROUTING AND REPAIRING OF CRACKS IN CONCRETE AND MOST OTHER BUILDING MATERIALS. Diamond matrix is designed for consistent even wear. Precision balanced.
SEGMENTED CRACK-CHASER™ BLADE P4™
SIDE VIEW
Using Pearl’s unique Direct Sintering Technology (DST™) the Crack-Chaser™ is manufactured so that the diamond matrix is molecularly bonded directly to the core. Because there are no segments to fly off the Crack-Chaser™ is the safest, most effective product for re-routing cracks and crevices. The Crack-Chaser™ has been engineered to quickly sink into cracks and crevices. Simply place the wheel on the crack and let the diamonds do the work. The special design enables the Crack-Chaser™ to produce a 1/2” wide 70˚ V-shaped groove. This has proven to be the most effective configuration for re-caulking and re-filling.
CRACK-CHASER™ BLADES
P2 PRO-V™
PT. NUMBER SPECS
PVV904M
56
4 x 5/8-11
P4™
MAX RPM
13,700
PT. NUMBER SPECS
V904 V904M V450M V700M
4 x M10 x .125 4 x 5/8-11 4-1/2 x 5/8-11 7 x 5/8-11
MAX RPM
13,700 13,700 13,300 8,500
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
PT. NUMBER
SPECS
V904MS
4 x 5/8-11
MAX RPM
13,700
DIAMONDS
CUP WHEELS
CUP WHEELS CONCRETE / MASONRY SINGLE AND DOUBLE ROW CUP WHEELS For Concrete, Block, Stone and Other Masonry Products.
GRANITE TURBO CUP WHEEL For Granite, Marble, Natural Stone, Artificial Stone, Soft Stone, Hard Brick.
P4™
P4™
K O
NE W
LO
P2 PRO-V™
OLD LO OK
PT. NUMBER SPECS
PV04CH PV04CDH PV07CH PV07CDH
4 x 5/8-11 (SINGLE ROW) 4 x 5/8-11 (DOUBLE ROW) 7 x 5/8-11 (SINGLE ROW) 7 x 5/8-11 (DOUBLE ROW)
MAX RPM
13,700 13,700 8,500 8,500
PT. NUMBER SPECS
DC4CDH DC4CDA DC5CDH DC7CDH DC7CDA
MAX RPM
4 x 5/8-11 (DOUBLE ROW) 13,700 4 x 7/8, 5/8 (DOUBLE ROW) 13,700 5 x 5/8-11 (DOUBLE ROW) 12,200 7 x 5/8-11 (DOUBLE ROW) 8,500 7 x 7/8, 5/8 (DOUBLE ROW) 8,500
PT. NUMBER SPECS
PW4CHPRF 4 x 5/8-11 (COARSE) PW4MHPRF 4 x 5/8-11 (MEDIUM)
MAX RPM
13,700 13,700
CONCRETE / MASONRY SWIRL CUP WHEELS For Concrete, Block, Stone and Other Masonry Products.
GRANITE DRY SHAPER For Granite, Marble, Natural Stone, Artificial Stone, Soft Stone.
P4™
P4™
K O
NE W
LO
P2 PRO-V™
OLD LO OK
PT. NUMBER SPECS
PV04CSEH PV04CSH PV07CSEH PV07CSH
4 x 5/8-11 (8 SEGMENTS) 4 x 5/8-11 (14 SEGMENTS) 7 x 5/8-11 (12 SEGMENTS) 7 x 5/8-11 (24 SEGMENTS)
MAX RPM
13,700 13,700 8,500 8,500
PT. NUMBER SPECS
DC4CSH DC7CSH
4 x 5/8-11 (8 SEGMENTS) 7 x 5/8-11 (12 SEGMENTS)
MAX RPM
13,700 8,500
PT. NUMBER SPECS
DS04CHSPF 4 x 5/8-11 (COARSE) DS04MHSPF 4 x 5/8-11 (MEDIUM) DS04FHSPF 4 x 5/8-11 (FINE)
MAX RPM
13,700 13,700 13,700
57
DIAMOND CUP WHEELS CUP WHEELS
DIAMONDS
GENERAL PURPOSE TURBO CUP WHEELS
GENERAL PURPOSE HEAVY DUTY
For Granite, Marble, Concrete, Brick, Block, Natural Stone, Refractory Material, Soft Stone, Sand Stone.
P5™
P5™
4 x 5/8-11 (COARSE) 4 x 5/8-11 (MEDIUM) 5 x 5/8-11 (COARSE) 7 x 5/8-11 (COARSE)
MAX RPM
13,700 13,700 12,200 8,500
OLD LO OK
T4CHEFX T4MHEFX T5CHEFX T7CHEFX
OLD LO OK
OLD LO OK
PT. NUMBER SPECS
K O
NE W
LO
K O
NE W
LO
K O
NE W
LO
P4™
For Granite, Marble, Concrete, Brick, Block, Natural Stone, Refractory Material, Soft Stone, Sand Stone.
PT. NUMBER SPECS
PW4C PW4CH PW4M PW4MH PW4F PW6CH
MAX RPM
4 x 7/8, 5/8 (COARSE) 4 x 5/8-11 (COARSE) 4 x 7/8, 5/8 (MEDIUM) 4 x 5/8-11 (MEDIUM) 4 x 7/8, 5/8 (FINE) 6 x 5/8-11 (COARSE)
13,700 13,700 13,700 13,700 13,700 10,200
PT. NUMBER SPECS
SW04C SW07C
MAX RPM
4-1/2 x 5/8-11 (COARSE) 13,300 7 x 7/8 , 5/8 (COARSE) 8,500
PROFESSIONAL DIAMOND CUP WHEELS FROM PEARL! Pearl diamond cup wheels are designed for grinding a wide variety of material. They are all engineered for heavy duty grinding, aggressive stock removal with extreme life. Pearl’s cup wheels are developed with high quality control standards you have come to expect from Pearl.
58
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
DIAMOND CUP WHEELS CORE BITS
DIAMONDS
CORE BITS GRANITE ADM™ (ADVANCED DIAMOND TECHNOLOGY) For Granite, Porcelain, Natural Stone, Artificial Stone.
TILE / MARBLE For Tile, Ceramic Tile, Marble, Granite.
P4™
P4™
P5™
OOK NEW L
OLD LOOK
PT. NUMBER SPECS PT. NUMBER SPECS
HB114RA4 HB138RA4 HB112RA4 HB200RA4
1-1/4 x 3-1/4 x 5/8-11 1-3/8 x 3-1/4 x 5/8-11 1-1/2 x 3-1/4 x 5/8-11 2 x 3-1/4 x 5/8-11
MAX RPM
PT. NUMBER SPECS
10,000 10,000 10,000 10,000
HB114RA5 HB138RA5 HB112RA5 HB200RA5
1-1/4 x 3 x 5/8-11 1-3/8 x 3 x 5/8-11 1-1/2 x 3 x 5/8-11 2 x 3 x 5/8-11
MAX RPM
10,000 10,000 10,000 10,000
HB100L2 HB114L2 HB138L2 HB112L2 HB200L2 HBCPL2
MAX RPM
1 x 2-1/4 x 3/8 1-1/4 x 2-1/4 x 3/8 1-3/8 x 2-1/4 x 3/8 1-1/2 x 2-1/4 x 3/8 2 x 2-1/4 x 3/8 Center point for core bit
1,200 1,200 1,200 1,200 1,200
GRANITE For Granite, Porcelain, Natural Stone, Artificial Stone.
TILE / STONE CORE DRILL BITS P3™
For Tile, Ceramic Tile, Porcelain, Marble, Granite, Glass.
P5™
P3™ OOK NEW L OLD LOOK
PT. NUMBER SPECS
HB100SPF HB114SPF HB138SPF HB112SPF HB200SPF
1 x 3-1/4 x 5/8-11 1-1/4 x 3-1/4 x 5/8-11 1-3/8 x 3-1/4 x 5/8-11 1-1/2 x 3-1/4 x 5/8-11 2 x 3-1/4 x 5/8-11
MAX RPM
4,000 4,000 4,000 4,000 4,000
PT. NUMBER SPECS
HB100GRT HB114GRT HB138GRT HB112GRT HB200GRT
1 x 3-1/4 x 5/8-11 1-1/4 x 3-1/4 x 5/8-11 1-3/8 x 3-1/4 x 5/8-11 1-1/2 x 3-1/4 x 5/8-11 2 x 3-1/4 x 5/8-11
MAX RPM
4,000 4,000 4,000 4,000 4,000
PT. NUMBER
SPECS
CDB3-16 CDB1-4 CDB5-16 CDB3-8 CDB1-2 CDB9-16
3/16 x 3/8 1/4 x 3/8 5/16 x 3/8 3/8 x 3/8 1/2 x 3/8 9/16 x 3/8
MAX RPM
2,500 2,500 2,500 2,500 2,500 2,500
59
CORE BITS CORE BITS
DIAMONDS
GENERAL PURPOSE DRY CORE BITS For Concrete, Granite, Brick, Stone.
CONCRETE WET CORE BITS For Concrete, Brick, Block, Masonry, Stone.
PT. NUMBER
SPECS
HB100L5 HB118L5 HB114L5 HB138L5 HB112L5 HB158L5 HB200L5 HB212L5 HB300L5 HB312L5 HB400L5 CPL5 CPL5-SHANK
1 x 5 x 1/2 1-1/8 x 5 x 1/2 1-1/4 x 5 x 1/2 1-3/8 x 5 x 1/2 1-1/2 x 5 x 1/2 1-5/8 x 5 x 1/2 2 x 5 x 1/2 2-1/2 x 5 x 1/2 3 x 5 x 1/2 3-1/2 x 5 x 1/2 4 x 5 x 1/2 Center point for core bit 1/2" x 16mm shank
MAX RPM
2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200
NEW! MASONRY & CONCRETE DRY CORE BITS For Masonry, Concrete, Brick, Block, Sandstone, Natural Stone, Artificial Stone.
60
PT. NUMBER
SPECS
HB100CDP HB112CDP HB200CDP HB212CDP HB300CDP HB312CDP HB400CDP HB500CDP HB600CDP
1 x 10 x 5/8-11 1-1/2 x 10 x 5/8-11 2 x 10 x 5/8-11 2-1/2 x 10 x 5/8-11 3 x 10 x 5/8-11 3-1/2 x 10 x 5/8-11 4 x 10 x 5/8-11 5 x 10 x 5/8-11 6 x 10 x 5/8-11
PT. NUMBER
HB100L14PB HB114L14PB HB112L14PB HB134L14PB HB200L14PB HB212L14PB HB234L14PB HB300L14PB HB312L14PB HB400L14PB HB414L14PB HB412L14PB HB500L14PB HB600L14PB HB700L14PB HB800L14PB HB900L14PB NEW! HB1000L14PB NEW! HB1200L14PB
SPECS
1 x 14 x 5/8-11 1-1/4 x 14 x 5/8-11 1-1/2 x 14 x 5/8-11 1-3/4 x 14 x 5/8-11 2 x 14 x 1-1/4 x 7 2-1/2 x 14 x 1-1/4 x 7 2-3/4 x 14 x 1-1/4 x 7 3 x 14 x 1-1/4 x 7 3-1/2 x 14 x 1-1/4 x 7 4 x 14 x 1-1/4 x 7 4-1/4 x 14 x 1-1/4 x 7 4-1/2 x 14 x 1-1/4 x 7 5 x 14 x 1-1/4 x 7 6 x 14 x 1-1/4 x 7 7 x 14 x 1-1/4 x 7 8 x 14 x 1-1/4 x 7 9 x 14 x 1-1/4 x 7 10 x 14 x 1-1/4 x 7 12 x 14 x 1-1/4 x 7
MAX RPM
6,000 5,000 5,000 5,000 5,000 5,000 5,000 3,500 2,500
NEW!
PG. 89
CORE DRILL RIGS
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
MAX RPM
4,000 3,500 3,000 3,000 2,000 1,400 1,350 1,300 1,150 1,000 950 900 800 665 600 500 450 400 330
DIAMONDS
POLISHING PADS
POLISHING PADS
3" PREMIUM POLISHING PADS HOOK & LOOP BACKING FOR FLOOR POLISHING PT. NUMBER
SPECS
FSPD3050 FSPD3100 FSPD3200 FSPD3500 FSPD31000 FSPD32000 FSPD3BUFF*
50 grit (olive) 100 grit (black) 200 grit (red) 500 grit (beige 1000 grit (white) 2000 grit (royal blue) BUFF (navy blue)
MAX RPM
200 200 200 200 200 200 200
*Use dry on dark color stones, wet on light color stones
4" PREMIUM POLISHING PAD KIT
Granite, Terrazzo, Natural Stone, Marble.
PT. NUMBER
SPECS
SPD4KIT
incl. 1 ea. (50, 100, 200, 500, 1000, 2000 & buff)
4" PREMIUM POLISHING PADS HOOK & LOOP BACKING PT. NUMBER
SPECS
SPD4050 SPD4100 SPD4200 SPD4500 SPD41000 SPD42000 SPD4BUFF*
50 grit (olive) 100 grit (black) 200 grit (red) 500 grit (beige) 1000 grit (white) 2000 grit (royal blue) BUFF (navy blue)
MAX RPM
4,200 4,200 4,200 4,200 4,200 4,200 4,200
*Use dry on dark color stones, wet on light color stones
BACKUP PADS HOOK & LOOP BACKING PT. NUMBER
SPECS
PAD358 PAD314 PAD310 PAD458 PAD414 PAD410
3 x 5/8-11 3 x M14 x 2.0 3 x M10 x 1.25 4 x 5/8-11 4 x M14 x 2.0 4 x M10 x 1.25
61
E X C I T I N G
NEW
EQUIPMENT AND ACCESSORIES
FLOOR GRINDER SINGLE-HEAD
FLOOR GRINDER DOUBLE-HEAD
FLOOR SCRAPER
• Utilizes (1) 10- or 20 segment 10"diameter diamond grinding discs to level, smooth or clean the top surface of concrete slabs
• Uses (2) 10- or 20 segment 10"-diameter diamond grinding discs to level, smooth or clean the top surface of concrete slabs
• 1HP motor
• Provides a smoother finish compared to other methods such as scarifying or scabbling • Two-position wheel carriage • Front taper for enhanced visibility • Removable nose weight for easy transportation • Dust shroud contains grinding debris • Water control valve is included for wet grinding
• Provides a smoother finish compared to other methods such as scarifying or scabbling • Counter rotating discs provide balanced torque to prevent pulling left or right • Can also be used to level small areas of uneven joints or high spots of 1/16 to 1/8" • A 22" grinding width makes for quick removal • Wide ergonomically designed T-grip handle for easy handling and maneuvering • Dust shroud contains grinding debris
• Works on concrete slabs, terrazzo, ceramic tile floors, brick and stone
• 2" vacuum port for dust-free operation
See page 90 for complete list of part numbers and specs
• Water control valve is included for wet grinding • Two-position wheel carriage for grinding and easy transport • Works on concrete slabs, terrazzo, brick, stone and ceramic tile floors See page 91 for complete list of part numbers and specs
62
• Sturdy design for removal of carpet, vinyl, adhesives and coatings • High stress, 7/8" shaft • Walk-behind scraper with adjustable handle height • Rear wheels adjust for ideal blade angle • Accommodates blade widths up to 12" • Labor and time-saving process for residential and light commercial projects • Nose weight helps keep blade underneath floor coverings resulting in greater efficiency See page 92 for complete list of part numbers and specs
PROFESSIONAL CONCRETE SAWS
18" GAS POWERED CONCRETE SAW
20" GAS POWERED CONCRETE SAW SELF-PROPELLED
20" GAS POWERED CONCRETE SAW SELF-PROPELLED WITH ELECTRIC START
• Chassis made from one-piece box construction with 3/16" hot-rolled steel that will not flex during operation
• Chassis made from one-piece box construction with 3/16" hot-rolled steel that will not flex during operation
• Chassis made from one-piece box construction with 3/16" hot-rolled steel that will not flex during operation
• Powder-coated chassis resists peeling and corrosion
• Powder-coated chassis resists peeling and corrosion
• Powder-coated chassis resists peeling and corrosion
• Cast-aluminum blade guard
• Cast-aluminum blade guard
• Cast-aluminum blade guard
• Stainless steel water system supplies water to both sides of blade
• Stainless steel water system supplies water to both sides of blade
• Stainless steel water system supplies water to both sides of blade
• Blade guard mounts on either left- or right-hand side of saw and cuts within 2" of wall or curb
• Blade guard mounts on either left- or right-hand side of saw and cuts within 2" of wall or curb
• Blade guard mounts on either left- or right-hand side of saw and cuts within 2" of wall or curb
• 1" blade shaft supported by two heavyduty, self-aligning pillow block bearings
• Heavy-duty blade shaft with two 1-3/16", self-aligning pillow block bearings
• Heavy-duty blade shaft with two 13/16", self-aligning pillow block bearings
• Depth control assembly engineered for smooth, controlled blade insertion
• Depth control assembly engineered for smooth, controlled blade insertion
• Depth control assembly for smooth controlled blade insertion
• Durable 8" x 2-1/4" non-slip rubber wheels with maintenance-free hubs and roller bearings
• Built-in tach/hour meter
• Built-in tach/hour meter
• Depth feed gauge indicator
• Depth feed gauge indicator
• Heavy-duty hydrostatic transmission with variable speed drive
• Heavy-duty hydrostatic transmission with variable speed drive
• Durable 8" x 2-1/4" non-slip rubber wheels with maintenance-free hubs and roller bearing
• Durable 8" x 2-1/4" non-slip rubber wheels with maintenance-free hubs & roller bearing
• Forward travel speed: 0-80'/minute
• Forward travel speed: 0-80'/minute
See page 87 for complete list of part numbers and specs
See page 88 for complete list of part numbers and specs
• Positive-locking depth control mechanism See page 86 for complete list of part numbers and specs
63
E X C I T I N G
NEW
EQUIPMENT AND ACCESSORIES
CORE DRILL RIGS WITH OR WITHOUT VACUUM BASE Precision rack-&-pinion carriage with maintenance-free doublesealed bearings 2-1/2" steel column with ceiling jack Lightweight cast-aluminum base with built-in wheels Positive anchoring for vertical & horizontal drilling Control box with amp meter Feed handle can be mounted on either side for easy drilling close to walls and columns See page 89 for complete list of part numbers and specs
VIRTUALLY ELIMINATES LIPPAGE! FOR FLOORS AND WALLS
ROTATING PROVIDES THE EXACT SPACING FOR YOUR JOB!
Fast and efficient - Increases productivity! • Designed to support stone and tile on vertical applications. • Spacing thickness: Blue small 1/64 - 1/4" (0.4 - 6.3mm); Green large 1/16 - 7/8" (1.6 - 22.2mm) • Ideal for leveling starter courses. • Great to maintain the gaps between countertop slabs and the wall while it cures. • Easily create any space for masonry, stone, tile and more. PT. NUMBER RWT75 RWM25
WING STRAP FOR UNGAUGED TILE
Save MORE time and money! • Designed to help virtually eliminate lippage in ungauged tile with up to 2mm difference. • 1/2" notched trowel (or greater) is recommended.
SPECS Blue small wedge (75/pack) • 1/64 - 1/4" (0.4 - 6.3mm) Green large wedge (25/pack) • 1/16 - 7/8" (1.6 - 22.2mm)
• Ideal for flat surfaces. Not recommended for slate.
FOR STONE
FOR MASONRY
FOR TILE
PT. NUMBER
SPECS
TLSWSTRAP500
500 Wing Straps/Box
TLSWSTRAP1000
1000 Wing Straps/Box
See page 95 for more information.
See page 94 for more information. 64
EQUIPMENT
FLOOR PREPARATION SYSTEM - HEXPIN ®
65
CORE BITS FLOOR PREPARATION SYSTEM - HEXPIN ®
EQUIPMENT, SAWS
FLOOR PREPARATION SYSTEM IT DOES MORE THAN SCRAPE! The Pearl Hexpin® System has revolutionized floor preparation. Use the standard Hexpin® Plates or Hexpin® Blocks with our patented system of interchangeable Hexpins® for grinding, sanding, polishing and coating removal. Pearl’s unique spring-based technology allows the Hexpin® attachments to float easily over rough surfaces while the fluted plate design helps maintain dust control. Engineered for use on standard floor buffers and dual-headed diamond grinders, the Pearl Hexpin® System is a tool that gives you choices. When looking to increase productivity and profitability, look to Pearl Professional Products for true craftsmanship... THE PEARL HEXPIN® SYSTEM. ®
HEXPLATES™ 11" HEXPLATES™ FOR 13" BUFFERS
15" HEXPLATES™ FOR 17" OR 18" BUFFERS
Shown with carbide chips. Shown with diamond pins.
66
Wide variety of interchangeable pins for grinding, sanding and coating removal. Spring mounted pins to allow for uneven surfaces.
Wide variety of interchangeable pins for grinding, sanding and coating removal. Spring mounted pins to allow for uneven surfaces.
PT. NUMBER
SPECS
PT. NUMBER
HEX1105EZ HEX1110EZ HEX1110G HEX1110C HEX1110B HEX11CBD HEX11QC HEX11FTC HEX11CBD3 HEX11CBD4
11" plate with 5 diamond EZ pads 11" plate with 10 diamond EZ pads 11" plate with 10 green diamond pins (gen. purpose) 11" plate with 10 gold diamond pins (coarse diamonds) 11" plate with 10 blue diamond pins (hard bonded) 11" plate with 10 carbide pins 11" plate with 5 quick change pins 11" plate with 5 turbo cut pins 11" plate with 10 carbide #3 cutter pins 11" plate with 10 carbide #4 cutter pins
HEX1706EZ 15" plate with 6 diamond EZ pads HEX1712EZ 15" plate with 12 diamond EZ pads HEX1764 15" plate with 6 diamond segmented pads HEX1712 15" plate with 12 green diamond pins (gen. purpose) HEX1712C 15" plate with 12 gold diamond pins (coarse diamonds) HEX1712B 15" plate with 12 blue diamond pins (hard bonded) HEX17CBD 15" plate with 12 carbide pins HEX17QC 15" plate with 6 quick change pins HEX17FTC 15" plate with 6 turbo cut pins HEX17BPD 15" plate with 6 hook and loop backing pads HEX17CUP 15" plate with 6 diamond cups HEX17CBD3 15" plate with 12 carbide #3 cutter pins PRODUCTION KITS HEX17KTG 1 HEX17CBD Plate and 12 HEX1PNG pins HEX17KTC 1 HEX17CBD Plate and 12 HEX1PNC pins HEX17KTT 1 HEX17CBD Plate and 6 HEX1FTC pins
SPECS
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
& ACCESSORIES
FLOOR PREPARATION SYSTEM - HEXPIN ®
SUPERCLUTCH™ SAFELY PREVENTS COUPLER BREAKAGE AND BUFFER DAMAGE. 15" HEXPLATES™ WITH SUPERCLUTCH™
} front of 15" plate
SUPERCLUTCH™
back of 15" plate
Clutch disengages after hitting an obstruction.
AUTOMATIC RESET. Clutch resets and the work is continued.
OBSTRUCTION FEATURES
BENEFITS
Super Clutch™ will disengage if the Hexpin® Plate hits an obstruction (i.e. bolts).
Protects operator from injury, protects buffer from damage and keeps buffer coupler from breaking.
Super Clutch™ is self resetting.
Simply turn off buffer and restart - less downtime.
Manually resetting torque locks (red tabs) inside clutch housing will keep clutch from disengaging.
Easy manual disengagement.
Torque Locks can be locked into place if there is a problem with the clutch disengaging too often because of the job. Simply loosen the screws holding the torque locks and turn the long end under the toothed slip ring. TIGHTEN THE SCREWS!
CAUTION: Coupler will not be protected if torque locks are left in the lockout position. Unlocked Position
PT. NUMBER
SPECS
HEX1CLUTCH
SuperClutch™ only
FOR 15" HEXPLATE™ HEX1706EZCLT 15" plate w/ clutch and 6 diamond EZ pads HEX1712EZCLT 15" plate w/ clutch and 12 diamond EZ pads HEX1764CLT 15" plate w/ clutch and 6 diamond segmented pads HEX1712CLT 15" plate w/ clutch and 12 green diamond pins (gen. purpose) HEX1712CCLT 15" plate w/ clutch and 12 gold diamond pins (coarse) HEX1712BCLT 15" plate w/ clutch and 12 blue diamond pins (hard bonded) HEX17CBDCLT 15" plate w/ clutch and 12 carbide pins HEX17QCCLT 15" plate w/ clutch and 6 quick change pins HEX17FTCCLT 15" plate w/ clutch and 6 turbo cut pins HEX17BPDCLT 15" plate w/ clutch and 6 hook and loop backing pads HEX17CUPCLT 15" plate w/ clutch and 6 diamond cups HEX17CBD3CLT 15" plate w/ clutch and 12 carbide #3 cutter pins HEX17CBD4CLT 15" plate w/ clutch and 12 carbide #4 cutter pins HEX17CLTH 15" plate w/ clutch only
Locked Position
67
CORE BITS FLOOR PREPARATION SYSTEM - HEXPIN ®
EQUIPMENT, SAWS
HEXPIN® APPLICATION CHART
Cured Green Uneven Stripe Line Floor Paint Old Paint Thinset Carpet Mastic Rubber Carpet Backing Epoxy Urethane Fiberglass Terrazzo
JOB
CARBIDE CHIP
50-50 REVERSE
AGGRESSIVE CHIP
VERY AGGRESSIVE CHIP
Very Aggressive Chip. Use twelve (12) HEX4CARB and a Super Clutch™
CONDITION
Aggressive Chip. Use twelve (12) HEX3CARB
SURFACE
GREEN DIAMOND
GOLD DIAMOND
BLUE DIAMOND
Sanding Grinding Sanding Grinding Grinding Removal Cleanup Removal Cleanup Removal Cleanup Removal Cleanup Removal Cleanup Removal Cleanup Removal Scarification Removal Scarification Removal Lippage Removal Polishing Lippage Removal
Marble
Polishing
Sanding
Sanding
Paint Removal
Paint Removal
Coating Removal Coating Removal Ice Wax Rust on Steel Dirt and Grease
Removal Remove/Apply Cleanup Removal Hard Bond for Green Concrete Diamond Pin.
Heavy Duty Diamond Pin.
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
General Purpose Diamond Pin.
68
50-50 Reverse-Reverse. Ask product specialist for details.
INDIVIDUAL JOB REQUIREMENTS MAY VARY. This chart only represents a general overview of Pearl's Hexpin® System. For more complete technical instruction, please refer to our Hexpin® Information Booklet or consult your local distributor.
TURBO CUT™
& ACCESSORIES
FLOOR PREPARATION SYSTEM - HEXPIN ®
HEXPIN® APPLICATION CHART SURFACE
CONDITION Cured Green Uneven Stripe Line Floor Paint Old Paint Thinset Carpet Mastic Rubber Carpet Backing Epoxy
Urethane Fiberglass Terrazzo
JOB Sanding Grinding Sanding Grinding Grinding Removal Cleanup Removal Cleanup Removal Cleanup
DIAMOND HEXCUPS®
DIAMOND DISC PADS
GRINDING STONE
COMMENTS • For increased performance add weight.
• For increased performance add weight. • Fine sand may be added to enhance paint removal.
• For increased performance add weight.
Lippage Removal
• Diamond Disc Pad Hexpins® are available in a variety of grits. Match the grit selection to job application.
Lippage Removal Polishing
Sanding
Sanding
Paint Removal
Paint Removal
Coating Removal Coating Removal Ice Wax Rust on Steel Dirt and Grease
DIAMOND PADS
Removal Cleanup Removal Cleanup Removal Cleanup Removal Scarification Cleanup Removal Scarification Cleanup Removal
Polishing Marble
DIAMOND EZ PADS
Removal Remove/Apply Cleanup Removal
• Fine sand may be added to enhance adhesive coating removal with Carbide and Diamond Hexpin®. • Cleanup applications should only be done when most of the mastic has been removed with Carbide Hexpins®. Concrete must be exposed before moving to Diamond or Turbo-Cut™ Hexpins® for cleanup.
• The Hexpin® Sander attachment allows standard buffer accessories to be used with the Pearl Hexpin® Plate. Select the appropriate attachment for your job application.
INDIVIDUAL JOB REQUIREMENTS MAY VARY. This chart only represents a general overview of Pearl's Hexpin® System. For more complete technical instruction, please refer to our Hexpin® Information Booklet or consult your local distributor.
69
CORE BITS FLOOR PREPARATION SYSTEM - HEXPIN ®
EQUIPMENT, SAWS
HEXPLATE™ ATTACHMENTS DIAMOND EZ PADS ATTACHMENT
#HEX1EZPAD
ATTACHES FAST AND EASY TO HEXPIN® CARBIDE HOLDER! EZ pads can only be used on carbide holder #HEX1CRBH.
#HEX1CRBH HEX1CHIP holder
CLEARANCE
NO NEED to remove all chips or holders as the Hexpin® EZ pad is high enough to provide clearance so the carbide chips do not touch the work surface.
PT. NUMBER
SPECS
HEX1EZHLD
Carbide holder (HEX1CRBH) with diamond EZ pad and screw (complete) Hexpin® diamond EZ pad
HEX1EZPAD
DIAMOND SEGMENTED PADS ATTACHMENT
Pearl has a NEW AND IMPROVED Diamond Segmented Pad (HEX4PAD) designed to be used on the 15" Hexplate™. They are made with an overall larger grinding/sanding area which increases production. When attached to the 15" Hexplate™, the new and improved Diamond Segmented Pads extend past the edge of the plate allowing the operator to GRIND OR SAND RIGHT UP TO THE EDGE OF THE WALL. All of Pearl’s diamond segmented pad attachments are engineered with an overall larger grinding surface area than the competition. This extends the life and improves the all-around grinding speed and performance. Can be used wet or dry on concrete surfaces for grinding and coating removal.
FOR 15" HEXPLATE™
70
PT. NUMBER
SPECS
HEX4SEG-MFD HEX4PAD-MFD HEX4HLDR HEX4HRDW
Complete diamond pin holder with diamond pad Diamond pad only, 4 segments - incl. nuts and washers Pad holder only - incl. springs, nuts and washers Hardware for diamond pad - incl. springs, nuts and washers
20% MORE GRINDING SURFACE AREA THAN THE COMPETITION. • Use with your standard Hexpin® plates & block • Faster and more aggressive grinding • Wide diamond segments mean longer life • Easily removes trowel marks • Smoothes rough finishes • Provides texture to slippery surfaces • Prepares concrete surfaces for coatings • Removes sealers and bond breaker coatings
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
WALL
FOR 15" HEXPLATE™
• Cost effective diamond attachment for Hexpin®. • Can easily be used with the Hexpin® carbide plate (#HEX17CBD or #HEX17CBDCLT). • 6 or 12 EZ pads can be used. • Spring mounted pins allow for uneven surfaces. • Excellent for sanding, light grinding and floor preparation on concrete. • Can be used wet or dry on concrete surfaces.
& ACCESSORIES
FLOOR PREPARATION SYSTEM - HEXPIN ®
CARBIDE HEXPIN® ATTACHMENT
Designed and fitted with a replaceable, four sided, abrasion resistant, carbide insert. Use for scraping and removal of a variety of coatings and paints from concrete surfaces
HEX1CHIP CARBIDE CHIP CHIP #1
HEX3CHIP CARBIDE CHIP AGGRESSIVE CHIP #3
HEX4CHIP CARBIDE CHIP VERY AGGRESSIVE CHIP #4
Use in removing thinset, mastics, glue, rubber or foam backed carpet residue, dirt buildup, ice and paint.
Useful when taking up unusually difficult-toremove mastics and glue. The chip has a hole to secure the chip when working in rough conditions.
WITH 8 SHARP EDGES! Best used to remove thin paint and epoxy from concrete, but works well for other concrete surface removal applications. So aggressive, we recommend that it only be used with the Hexpin® Super Clutch™ plate.
PT. NUMBER
SPECS
PT. NUMBER
SPECS
PT. NUMBER
SPECS
HEX1CARB
Carbide holder with #1 chip and screw (complete) #1 replacement carbide chip Replacement screw for #1 chip Carbide holder for #1 chip and diamond EZ pad
HEX3CARB
Carbide holder with #3 chip and screw (complete) #3 replacement carbide chip with screw hole Replacement screw for #3 chip Carbide holder for #3 chip
HEX4CARB
Carbide holder with #4 chip and screw (complete) #4 replacement carbide chip with screw hole Replacement screw for #4 chip Carbide holder for #4 chip
HEX1CHIP HEX1SCRE HEX1CRBH
HEX3CHIP HEX3SCRE HEX3CRBH
HEX4CHIP HEX4SCRE HEX4CRBH
DIAMOND HEXPIN® ATTACHMENT
TURBO-CUT™ HEXPIN® ATTACHMENT
Designed to be used for grinding and sanding concrete surfaces. Pins offered in GREEN-general purpose, GOLD-heavy duty and BLUE-hard bonded pins for abrasive surfaces.
Specially engineered for coating removal where abrasive grains are more effective than customary scraping methods. Suited for light scarification of coated surfaces, removal of urethane and rubberized coatings, sealers and light rust from metal surfaces.
PT. NUMBER
SPECS
PT. NUMBER
SPECS
HEX1PNG HEX1PNC HEX1PNB
Replacement general purpose green pins Replacement coarse gold pins Replacement hard bonded blue pins for abrasive surfaces
HEX1FTC
Turbo-Cut™ Hexpin® (includes: FSP4516, FPD50, HX1FTCHL, HX1FTCNT and HX1FTCSC) 4-1/2 x 7/8 • C16 Turbo-Cut™ disc Replacement plastic backup pad 3-3/8" Replacement plastic backup pad 4-3/8" Turbo-Cut™ holder Nut for Turbo-Cut™ holder Screw for Turbo-Cut™ nut
FSP4516 FPD50 FPD70 HX1FTCHL HX1FTCNT HX1FTCSC
71
CORE BITS FLOOR PREPARATION SYSTEM - HEXPIN ®
HEX-CUP™ HEXPIN® ATTACHMENT
EQUIPMENT, SAWS
GRINDING STONE ATTACHMENT Shown with QUICK CHANGE (HEX15811) attachment sold separately DAD5811L
Specially engineered 4" diamond cup wheels provide superior grinding on flat slab surfaces. Unique beveled edge design allows these Cup Wheel Hexpins® to glide easily over slab concrete surfaces. PT. NUMBER
SPECS
HEX1CUP DAD5811L HEX15811
4" cup wheel (coarse), DAD5811L included 7/8 to 5/8-11 Left Threaded (1/4" Shoulder) Adapter Quick Change™ Hexpin®
QUICK CHANGE™
Use for grinding terrazzo, concrete, or stone. Coarse - for aggressive removal of rough concrete, uneven joints, mastics, aggregate surfaces and grinding terrazzo. Medium - finish grinding of concrete, stone, terrazzo, aggregate surfaces and brick. Fine - smooth grinding of concrete, terrazzo, stone and brick. 6 blocks required for each machine. PT. NUMBER
SPECS
BLK210 BLK224 BLK280 BLKWDG
2 x 2 x 4 • C10 (COARSE) 2 x 2 x 4 • C24 (MEDIUM) 2 x 2 x 4 • C80 (FINE) Replacement Wooden Wedge
PCS/BOX
6 6 6 6
A unique Hexpin® attachment with 5/8-11 reverse thread for use with a variety of Quick Change Hexpin® attachments. PT. NUMBER
SPECS
HEX15811
Quick change Hexpin®
10" SURFACE GRINDING PLATE
Designed for grinding concrete. They are excellent for aggressive stock removal and give rough concrete surfaces the smoothest finish in the quickest time. Can be used on single-head floor machines and may also be attached to Pearl’s 11" Hexplate™ for use on the GRM11. • Available in 10 or 20 segments. • Wet or dry use. Fast grinding. Long life.
NEW!
72
PT. NUMBER
SPECS
HEX1GHP10 HEX1GHP20
10" x 3/4 arbor, 4 holes • 10 Segments 10" x 3/4 arbor, 4 holes • 20 Segments
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
PG. 90
FLOOR GRINDERS
& ACCESSORIES
3" DIAMOND DISC PADS HOOK & LOOP ATTACHMENT
FLOOR PREPARATION SYSTEM - HEXPIN ®
REPLACEMENT PARTS FOR PLATES AND BLOCKS
Use with diamond disc pad attachment. Sold separately.
A.
F.
B. Proprietary Hybrid Resin Technology. Special non-marking resin. Thick crack resistant base extends pads life. Beveled edge improves polishing capability. PT. NUMBER
SPECS
FSPD3050 FSPD3100 FSPD3200 FSPD3500 FSPD31000 FSPD32000 FSPD3BUFF*
3 x 50 grit (olive) 3 x 100 grit (black) 3 x 200 grit (red) 3 x 500 grit (beige) 3 x 1000 grit (white) 3 x 2000 grit (royal blue) 3 x BUFF (navy blue)
C.
D.
E.
MAX RPM
200 200 200 200 200 200 200
*Use dry on dark color stones, wet on light color stones
BACK UP PAD FOR DIAMOND DISC PADS
PT. NUMBER
SPECS
A. HEX1CLP B. HEX1SLV C. HEX1SPNG D. HEX1SCRE E. HEX1HRDW F. HEX1EZPIN
Clutch plate Replacement carbide sleeve Spring (heavy duty) Screw Nut and lock washer EZ Lock pin
16 IN. SANDING PLATE ATTACHMENT
USE WITH QUICK CHANGE™. Special backup pads and diamond polishing discs can be used for polishing marble and granite floors. Shown with Hook & Loop Pad and Quick Change attachment. PT. NUMBER
SPECS
HEX1BPD3
3" back up pad Replacement cup, nut and washer for BUFSPL16.
TUNGSTEN CARBIDE SHARPENING WHEEL TYPE 27 For Backhoes, Trenchers, Excavators, Tillers, Shovels, Stump Grinders, Jackhammer Bits, Carbide Scrapers, Masonry Drill Bits.
Heavy duty aluminum plate. 3/8" thick felt pad. Durable metal center casting. For use on 17"-18" floor buffer machines. It includes our HEX1CLP clutch plate to fit most floor machines. PT. NUMBER
SPECS
BUFSPL16 BUFCUP16 BUFNUT16 BUFFELT16
16" Sanding Plate Attachment Replacement Cup for BUFSPL16 Replacement Nut & Washer for BUFSPL16 Replacement Pad
Dense heavy duty felt. Rated #1 in density.
PT. NUMBER
SPECS
SHW045H
4-1/2 x 5/8-11 T-27
MAX RPM
13,300
73
CORE BITS FLOOR PREPARATION SYSTEM
EQUIPMENT, SAWS
FLOOR CARE EQUIPMENT
17" HAWK BUFFER HEAVY DUTY FLOOR MACHINE PT. NUMBER
#HEX1BFRHK 1-1/2 HP DUAL CAPACITOR BALDOR AC MOTOR AND SDP (SEVERE DUTY PLANETARY) 3 IDLE GEAR BOX - 175 RPM. LONG 50 FT. (14-3) CORD. USE WITH 15" HEXPLATES.
ACCESSORIES:
SOLUTION TANK 4-gal. capacity PART #BUFTNK02
WEIGHT POST PART #HP0008
10-LB. WEIGHTS PART #HEX10LBS
ADD-A-WHEEL™ BUFFER ATTACHMENT PT. NUMBER
#BUFAW-1 FOR EASY CONTROL OF A FLOOR BUFFER STABILIZES THE BUFFER EASY TO INSTALL MANEUVERS WITH EASE BETTER BUFFER CONTROL Shown with buffer.
74
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
FOR USE ON HAWK AND SATURN MACHINES
& ACCESSORIES
DUST CONTAINMENT SYSTEM
DUST CONTAINMENT SYSTEM FOR GRINDERS VACU-GUARD™ FOR 4-1/2" AND 7" GRINDERS
Available with tungsten carbide wear pads for longer life! Durable and effective dust containment system. For grinding only. Adapts easily to a variety of angle grinders. Pearl’s exclusive flexible diaphragm allows the operator to adjust the grinder angle without sacrificing dust containment efficiency. A special Delrin seal strip allows the unit to flow easily over a variety of surfaces. VACU-GUARD™ STANDARD PT. NUMBER VACGR45 VACGR45B VACG45ME VACGR45DE VACGRDE VACGRBO VACGRMH VACGR01
SPECS 4-1/2" Vacu-Guard™ for Dewalt® & Black & Decker® 4-1/2" Vacu-Guard™ for Bosch® & Makita® 4-1/2" Vacu-Guard™ for Metabo® 4-1/2" Vacu-Guard™ for Dewalt® DW28402 & DW818 7" Vacu-Guard™ Dewalt® D28494S, D28494N 7" Vacu-Guard™ for Bosch® & Milwaukee® 7" Vacu-Guard™ for Metabo® & Hitachi® 7" Vacu-Guard™ - use with Makita® GA 7911 or GA 700IL, Black & Decker®, Dewalt™
VACU-GUARD™ WITH CARBIDE PROTECTION Shown with grinder.
Outlet hose port. 4-1/2" (1-1/2" O.D.), 7" (2" O.D.) Heavy Duty aluminum casting.
PT. NUMBER VACGR45C VACGR45BC VACG45MEC VACGR45DEC VACGRDEC VACGRBOC VACGRMHC VACGR01C
SPECS 4-1/2" Vacu-Guard™ for Dewalt® & Black & Decker® 4-1/2" Vacu-Guard™ for Bosch® & Makita® 4-1/2" Vacu-Guard™ for Metabo® 4-1/2" Vacu-Guard™ Dewalt® DW28402 & DW818 7" Vacu-Guard™ Dewalt® D28494S, D28494N 7" Vacu-Guard™ for Bosch® & Milwaukee® 7" Vacu-Guard™ for Metabo® & Hitachi® 7" Vacu-Guard™ - use with Makita® GA 7911 or GA 700IL, Black & Decker®, Dewalt™
Exclusive flexible diaphragm. VACU-GUARD™ REPLACEMENT PARTS Special Delrin sliding strip. Carbide wear pads.
FEATURES
BENEFITS
Exclusive Flexible Diaphragm.
Allows the operator to adjust the grinder angle without sacrificing dust containment efficiency.
Special Delrin Sliding Strip.
Allows Vacu-Guard™ to slide easily over a variety of surfaces.
Heavy Duty Aluminum Casting.
Lightweight, long lasting and durable.
Carbide Wear Pads.
Protects the Delrin slide from excessive wear, thus increasing life.
Adjustable Hub Adapters.
Able to adapt to a variety of angle grinders.
Ask your local distributor about Vacu-Guards™ to fit a variety of other popular grinders.
PT. NUMBER VAC14CHP VACMPL45 VACSP45SET VACNEO45 VACGST45 VACBP45M VACINR45 VACBP45B VACIR45B VACPB45M VACIR45ME VACIR45ME-NS VAS1012P VACS1058 VAS1024F VAS1412F VACMPL07 VACSP7SET VACNEN07 VACGST70 VACSPL01 VACINR01 VACSPLBO VACINRBO VACINRMH VASCR12P VASCR34F VACSCR1
SPECS 1/4" Rounded Tungsten Carbide chip Main Bolt Plate for 4.5 Vacu-Guard™ (all) Inner Springs 4-1/2" Vacu-Guard™ (all) 3 sets Neoprene for 4-1/2" Vacu-Guard™ (all) Delrin seal strip for 4-1/2" Vacu-Guard™ (all) Small Inner Bolt Plate (Makita®) Inner Ring - Hub (Dewalt®) Small Inner Bolt Plate (Bosch®) Inner Ring - Hub (Bosch® & Makita®) Small Inner Bolt Plate (Metabo®) Inner Ring - Hub (Metabo®) Inner Ring - Hub (Metabo® with quick adjustment guard ) 10-24 x 1/2 Pan Head Machine Screws (all 4-1/2" VG) 6 sets 10-24 x 5/8 Socket Head Bolts (all 4-1/2" VG) 2 sets 10-24 x 1/2 Flat head Machine Screws (Makita®/Bosch®) 4 sets 1/4-20 x 1/2 Flat Head Machine Screws (Metabo®) 4 sets Main Bolt Plate for 7" Vacu-Guard™ (all) Inner Springs for 7" Vacu-Guard™ (all) 4 sets Neoprene for 7" Vacu-Guard™ (all) Delrin seal strip for 7" Vacu-Guard™ (all) Small Inner Bolt Plate (Makita®) Inner Ring - Hub (Makita®) Small Bolt Plate (Bosch®/Metabo®) Inner Ring - Hub (Bosch®/Metabo®) Additional Ring for Metabo® 1/4-20 x 1/2 Pan Head Machine Screws (all) 8 sets 1/4-20 x 3/4 Flat Head Machine Screws (all) 4 sets 1/4-20 x 1 Socket Head Bolt (all) (set of 4)
75
CORE BITS DUST CONTAINMENT SYSTEM
EQUIPMENT, SAWS
FOR GRINDERS QUIKATTACH™ FOR 4" AND 4-1/2" GRINDERS
BEFORE
AFTER
Outlet hose port. 1-1/2" O.D.
PT. NUMBER
#VACCUT45
Installs in seconds. VACUUM REQUIREMENTS: QuikAttach™ will work with any vacuum, but for optimum efficiency use a vacuum rated at or above 11.5 amps (1.75 continuous hp) or 110 cfm.
No tools required. Easy to use.
EASILY SNAPS ON!
FOR BUFFERS BUF-VAC™ FOR 17" BUFFERS PT. NUMBER
BEFORE
#BUFVAC1 BFVCADP1 BFVCRB1
Includes: Vacuum hose port, Rubber vacuum shield.
Vacuum Hose Port Rubber Vacuum Shield
INSTALLS IN MINUTES!
Outlet hose port. 2" O.D.
NO SPECIAL TOOLS NEEDED!
Designed to adjust to any 17" buffer in just minutes, no special tools needed!
76
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
AFTER
& ACCESSORIES
DUST CONTAINMENT SYSTEM
FOR CIRCULAR SAWS STAINLESS STEEL SAW VAC™ FOR CIRCULAR SAWS
BEFORE
AFTER
PT. NUMBER
#SDC714M
Outlet hose port. 1-1/2" O.D.
VACUUM REQUIREMENTS: SawVac™ will work with any vacuum, but for optimum efficiency use a vacuum rated at or above 11.5 amps (1.75 continuous hp) or 110 cfm.
EASY TO ASSEMBLE, INSTALLS IN MINUTES! PERFECT WHEN CUTTING: CONCRETE • FIBERGLASS • WOOD Made of heavy duty stainless steel for durability. Easy to assemble, installs in minutes! Does not obstruct operator’s view. WORKS WELL WITH YOUR
COLLECTS UP TO 95% OF DUST!
WILL FIT THE FOLLOWING SAWS: - All Skil® 7-1/4 worm drive saws, including HD77 and HD77mag - Skil® 8-1/4 Model 5860 (with slight modification) - Bosch® Model 1677M worm drive saw
WATERKIT™ FOR CIRCULAR SAWS PT. NUMBER
#BRWK001 Includes: Ground Fault Circuit Interrupter, Blade Roller ball valve diverter assembly, Quick Release Coupler with 2 Rubber Gaskets, Flexible Plastic Tube, Plastic Nut, Hose Clamps.
Reduces the operator’s levels of dangerous, cancer causing airborne pathogens, dust and fatigue! Finger tip controls allow the minimal use of water, to help control the hazards to the environment created by wet cutting. Cooling and lubricating with water will make your expensive diamond blades last up to 50% longer. Cooling the blade also helps to cool the motor, thus extending the life of your saw. Kit includes a UL Listed Ground Fault Circuit Interrupter to eliminate shock hazard.
WORKS WELL WITH YOUR
Shown with saw, blade and Blade Roller™.
CONTROLS DUST AND INCREASES TOOL LIFE!
77
CORE BITS POWER TOOL ACCESSORIES
EQUIPMENT, SAWS
POWER TOOL ACCESSORIES
EXCELLENT FOR DECORATIVE CONCRETE!
FOR WORM DRIVE SAWS & CIRCULAR SAWS NO TOOLS REQUIRED. NON-MARKING WHEELS. ELIMINATE COSTLY HEAVY EQUIPMENT.
Wood
Concrete
“THE ORIGINAL” BLADE ROLLER™ FOR WORM DRIVE SAWS
Wonder Board
Granite
SIDEWINDER™ BLADE ROLLER™ FOR LEFT & RIGHT CIRCULAR SAWS
PT. NUMBER
PT. NUMBER
#BR70001
#BR7001C
Will fit the following saws: - Makita® 5007NH - Makita® 5007NL - Makita® 5007NB - Dewalt® DW368 - Porter Cable® 743 - Milwaukee® 6390 - Bosch® 1655
Will fit the following saws: - Skil® HD77 & HD77 MAG - Skil® HD5860 (8-1/4") - Makita Hypoid® - Bosch® 1677M
AVAILABLE IN
6-PACK POINT OF PURCHASE DISPLAY
Marble
AVAILABLE IN Shown with saw, water kit and diamond blade.
Shown with saw and diamond blade.
6-PACK POINT OF PURCHASE DISPLAY
USES: CUTTING concrete slab, marble, granite, Wonder Board®, plywood, stucco; MAKING tension relief lines in slab concrete; CREATING access cuts in slab concrete for plumbing and electrical retrofit; SCORING decorative lines in poured slab or ovelays; FABRICATING slab granite and marble countertops, floors, etc.; RIPPING long straight cuts on plywood sheeting; CREATING cutouts in stucco for retro fitting doors and windows.
78
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
& ACCESSORIES
REMOVABLE ROLLING CARRIAGE FOR CIRCULAR SAWS, WORM DRIVE SAWS AND GRINDERS INCREASE CUTTING SPEED • MAKE STRAIGHT CUTS • EASILY INCREASE CONTROL AND ACCURACY
POWER TOOL ACCESSORIES
WHY SPEND THOUSANDS ON A WALK BEHIND SAW? Turn your Skil™ Worm Drive Saw and Pearl Blade Roller™ into A PORTABLE CUTTING MACHINE!
FOR GRINDERS INSTALLS IN SECONDS
SAW HANDLE™ PORTABLE CUTTING MACHINE USE WITH SKIL™ SAW AND BLADE ROLLER™
GREAT FOR CRACKCHASING AND TUCK POINTING ADJUSTABLE DEPTH OF CUT NON-MARKING WHEELS
PT. NUMBER Concrete, Marble, Limestone, etc.
#BRHDLSK01
GRINDER CADDY™ BLADE ROLLER™ FOR 4" AND 4-1/2" GRINDERS
LIGHTWEIGHT
PT. NUMBER
LOW COST
EASY TO ATTACH OR REMOVE
#BR45003
Will fit the following saws: - Skil® HD77 & HD77 MAG - Skil® HD5860 (8-1/4") Shown with Skil® saw and The Blade Roller™.
Will fit the following grinders: - Metabo® WE9-125Quick - Dewalt® DW402 - Ridgid® R1000 - Makita® 9527PB - Bosch® 1710 - Hitachi® G12SE2 - Milwaukee® 6148-6 - And many more...
Shown with grinder and diamond blade.
USES: SCORING DECORATIVE LINES; TUCK POINTING; STONE AND MASONRY WORK; FABRICATION; CRACK CHASING.
USES: ACCESS CUTS in slab concrete for retro plumbing and electrical; TENSION RELIEF LINES in slab concrete; SCORE DECORATIVE LINES in poured slab or overlays.
79
CORE BITS PROFESSIONAL TILE SAWS
EQUIPMENT, SAWS
PROFESSIONAL SAWS 10" PROFESSIONAL TILE SAW PART# VX10.2XLPRO
Shown with P4 Porcelain blade.
“THE SHERMAN TANK OF TILE SAWS!”
PATENTED TELESCOPING TABLE IS AVAILABLE ONLY FROM PEARL.
PERFORMANCE DRIVEN FEATURES:
POWERFUL 2 HP INDUCTION MOTOR. HEAVY DUTY STAINLESS STEEL WATER TRAY FOR STRENGTH AND DURABILITY. HEAVY DUTY ON/OFF SWITCH.
MOTOR
2 HP, 115v, 60Hz, single phase, 3,450 rpm With thermal overload protection
CUTTING CAPACITY
Depth of cut: Max. 3-1/4" Rip cut: 24" x 24" tile Angle cut: 18" x 18" tile
BLADE CAPACITY
8" - 10" with 5/8" arbor size
WEIGHT
84 lbs.
DIMENSION
(L)24" x (W)22-1/2" x (H)19-1/4"
STAINLESS STEEL RAIL GUIDES. 10-SEALED METAL ROLLER BEARINGS. INCLUDED WITH SAW: PROFESSIONAL DIAMOND BLADE, STAINLESS WATER TRAY, DRIP TRAY (Fits front and back), BLADE WRENCH, 45º/90º RIP GUIDE, WATER PUMP, MITER BLOCK, PRODUCT MANUAL AND WARRANTY CARD.
10 IN. PROFESSIONAL DIAMOND BLADE INCLUDED!
ACCESSORIES:
MASTER GUIDE #V370064
STAINLESS STEEL TUB #V35012SS
ANGLE GUIDE #V370060
TABLE EXTENSION #V38008 45º/90º RIP GUIDE #V35000
ONE-YEAR LIMITED WARRANTY
80
PEARL SAW STAND #V35010-UV
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
MITER BLOCK #S1000-34
& ACCESSORIES
PROFESSIONAL TILE SAWS
10" CO-ACTION™ TILE SAW PART# CX10
Shown with P4 Porcelain blade.
“THE TILE SAW OF THE FUTURE IS HERE!”
PATENTED CO-ACTION ™ DESIGN IS AVAILABLE ONLY FROM PEARL.
WHAT IS CO-ACTION™ TECHNOLOGY? New patented technology lets the cutting head and table travel in different directions at the same time. This lets the saw make big cuts, with increased accuracy in a smaller footprint.
BENEFITS OF CO-ACTION™: • CUTTING IS ACCOMPLISHED OVER THE PAN AND DRIP TRAYS CONTAINING THE WATER RUN OFF.
10 IN. PROFESSIONAL DIAMOND BLADE INCLUDED!
• ABILITY TO WORK IN SMALLER SPACES. • INCREASED ACCURACY.
• TABLE TRAVELS 50% LESS THAN CONVENTIONAL SAWS.
INCLUDED WITH SAW: PROFESSIONAL DIAMOND BLADE, DRIP TRAYS (Rear and side drip trays can be placed on the tile saw pan to catch water run off when cutting large tiles, 45º/90º RIP GUIDE, WATER TRAY, MULTIPLE WRENCH, WATER PUMP, OWNER’S MANUAL AND WARRANTY CARD.
FEATURES:
PLUNGE FEATURE ALLOWS THE USER TO MAKE QUICK PLUNGE CUTS WITH THE SPRING LOADED CUTTING HEAD. 8-SEALED METAL ROLLER BEARINGS AND STAINLESS STEEL RAILS ALLOW THE TABLE TO ROLL SMOOTHLY, INSURING ACCURATE CUTS. LONG LIFE.
MOTOR
2 HP, 115v, 60Hz, single phase, 3,450 rpm With thermal overload protection
CUTTING CAPACITY
Depth of cut: Max. 3-1/4" Rip cut: 24" x 24" tile. Angle cut: 18" x 18" tile
BLADE CAPACITY
10" with 5/8" arbor blade
WEIGHT • SIZE
60 lbs. • (L)35-1/2" x (W)23-1/2"
ACCESSORIES:
MASTER GUIDE #V370064 ANGLE GUIDE #V370060
PEARL SAW STAND #V35010-UV
TABLE EXTENSION #V38008 45º/90º RIP GUIDE #V35000 MITER BLOCK #S1000-34
ONE-YEAR LIMITED WARRANTY
81
CORE BITS PROFESSIONAL TILE SAWS
EQUIPMENT, SAWS
7" TILE SAW PART# PA-7 RIP CUT
COMPACT
POWERFUL
20 3/4 14
DIAGONAL CUT
ONLY LONG
Shown with P2 PRO-V™ tile blade.
LIGHTWEIGHT ONLY
MOTOR
40 LBS.
HIGH TORQUE
“PRO TILE SAW AT A VALUE PRICE.”
FEATURES:
STEEL FRAME AND CAST ALUMINUM COMPONENTS. POWERFUL 3/4 HP MOTOR WITH RE-USABLE AIR FILTER. WATER PUMP INCLUDED. TABLE RETENTION DEVICE SECURES THE CUTTING TABLE WHEN TRANSPORTING THE SAW.
INCLUDED WITH SAW: PROFESSIONAL DIAMOND BLADE, HEAVY DUTY STAINLESS STEEL WATER TRAY (High durability tray for heavy-duty jobs), 45˚/90˚ RIP GUIDE, UNIVERSAL WRENCH, WATER PUMP, OWNER’S MANUAL AND WARRANTY CARD.
7 IN. PROFESSIONAL DIAMOND BLADE INCLUDED!
MOTOR
3/4 HP, 115v, 60Hz. 6,350 rpm
CUTTING CAPACITY
Depth of cut: Max. 3-1/4" Rip cut: 20" x 20" tile. Angle cut: 14" x 14" tile
BLADE CAPACITY
7" with 5/8" arbor blade
WEIGHT • SIZE
40 lbs. • (L)33" x (W)18.7"
ACCESSORIES: MITER BLOCK #S1000-34
ONE-YEAR LIMITED WARRANTY ANGLE GUIDE #V370060 PEARL SAW STAND #V35010-UV
82
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
45º/90º RIP GUIDE #V35000
& ACCESSORIES
10" RAIL SAW PART# VX10RS
PROFESSIONAL RAIL SAW
Holes in the table divert water and waste material away from the work area. Water is recycled through these holes keeping it in the pan and off the floor.
LEGS FOLD UNDER SAW FOR EASY TRANSPORT.
Shown with P2 PRO-V™ Porcelain blade.
FEATURES:
POWERFUL 1-1/2 HP MOTOR. POSITION LOCK CUTTING HEAD.
MOTOR
1-1/2 HP, 115v, 60Hz, single phase 3,450 rpm, 60 Hz With thermal overload protection
CUTTING CAPACITY
Depth of Cut: (8" blade) 1-1/2" (10" blade) 2-5/8" Rip Cut: 37" Diagonal Cut: 26"
BLADE CAPACITY
8" - 10" with 5/8" arbor size
WEIGHT
145 lbs.
RUBBER MATTED CUTTING TABLE. STURDY WHEELS FOR EASY TRANSPORT. REMOVABLE EXTENSION TABLE ADDS EXTRA WORKSPACE. SPLASH GUARD REDUCES OVERSPRAY. BLADE CAPACITY OF 10" ENHANCES CUTTING CAPACITY. INCLUDED WITH SAW: PROFESSIONAL DIAMOND BLADE, 45º/90º RIP GUIDE, MULTIPLE WRENCH, WATER PUMP, WATER LEVEL TUBE, TABLE EXTENSION, DRAIN PLUG, OWNER’S MANUAL AND WARRANTY CARD. ONE-YEAR LIMITED WARRANTY
10 IN. PROFESSIONAL DIAMOND BLADE INCLUDED!
ACCESSORIES:
TABLE EXTENSION #V370014
MASTER GUIDE #V370064
ANGLE GUIDE #V370060
83
CORE BITS PROFESSIONAL BRICK SAWS
EQUIPMENT, SAWS
14" PROFESSIONAL MASONRY/BRICK SAW WITH HEAVY DUTY 2-HP INDUCTION MOTOR PART# VX141MSPRO
Shown with P2 PRO-V™ Concrete/Masonry blade.
FEATURES:
POWERFUL 2 HP INDUCTION MOTOR. CUTTING CAPACITY: 8 x 8 x 16''. BELT DRIVEN. DUAL VOLTAGE (110V & 230V). SPRING-LOADED CUTTING HEAD FOR CHOP SAW ACTION. TABLE LOCK. WEIGHT: 110 LBS.
INCLUDED WITH SAW: PROFESSIONAL DIAMOND BLADE, 45˚/90˚ RIP GUIDE, OWNER’S MANUAL AND WARRANTY CARD.
14 IN. PROFESSIONAL DIAMOND BLADE INCLUDED!
ONE-YEAR LIMITED WARRANTY
MOTOR
2 HP induction motor, 115v/230v, 60Hz, single phase, 3,600 rpm. With thermal overload protection
CUTTING CAPACITY
8" x 8" x 16"
BLADE CAPACITY
14" with 1" arbor
WEIGHT
110 lbs.
DIMENSION
(L)31-1/2" x (W)18-1/2" x (H)21"
ACCESSORIES: BRICK SAW STAND #V350MS
WET CUTTING KIT Includes tub, drip tray, water hose and pump. #V350MSWKIT
WATER HOSE KIT #V350MSGHKIT
45º/90º RIP GUIDE #V35000
84
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
& ACCESSORIES
PROFESSIONAL BRICK SAWS
14" MASONRY/BRICK SAW PART# VX141MS
CAN BE CARRIED BY ONE PERSON
Shown with P2 PRO-V™ Concrete/Masonry blade.
FEATURES:
POWERFUL 3 HP, 15 AMP MOTOR. MOTOR AIR FILTER THAT IS EASILY MAINTAINED AND PROTECTS MOTOR. SPRING-LOADED CUTTING HEAD - For chop saw action. 3-Locking Head Positions (Lowest - Middle - Upper). STURDY HANDLES FOR EASE OF CHOP SAW ACTION. METAL TABLE ROLLERS FOR STRENGTH AND DURABILITY. DUST DEFLECTION STAINLESS STEEL PLATE.
MOTOR
3 HP, 115v, 60Hz, single phase, 3,600 rpm With thermal overload protection
CUTTING CAPACITY
8" x 8" x 16"
BLADE CAPACITY
14" with 1" arbor
WEIGHT
75 lbs.
DIMENSION
(L)31-1/2" x (W)18-1/2" x (H)19"
TABLE LOCK. INCLUDED WITH SAW: PROFESSIONAL DIAMOND BLADE, 45˚/90˚ RIP GUIDE, OWNER’S MANUAL AND WARRANTY CARD.
14 IN. PROFESSIONAL DIAMOND BLADE INCLUDED!
ONE-YEAR LIMITED WARRANTY
ACCESSORIES: BRICK SAW STAND #V350MS
WET CUTTING KIT Includes tub, drip tray, water hose and pump. #V350MSWKIT
WATER HOSE KIT #V350MSGHKIT
VACUUM SYSTEM FOR DUST COLLECTION 4" outlet reduces to 2-1/2". #V350MSDKIT
45º/90º RIP GUIDE #V35000
85
CORE BITS PROFESSIONAL GAS POWERED SAWS
EQUIPMENT, SAWS
NEW! 18" GAS POWERED CONCRETE SAW PART# PA1813HS
FEATURES: CHASSIS MADE FROM ONE-PIECE BOX CONSTRUCTION WITH 3/16" HOT-ROLLED STEEL THAT WILL NOT FLEX DURING OPERATION
Shown with P2 PRO-V™ blade.
POWDER-COATED CHASSIS RESISTS PEELING AND CORROSION CAST-ALUMINUM BLADE GUARD STAINLESS STEEL WATER SYSTEM SUPPLIES WATER TO BOTH SIDES OF BLADE BLADE GUARD MOUNTS ON EITHER LEFT- OR RIGHTHAND SIDE OF SAW AND CUTS WITHIN 2" OF WALL OR CURB 1" BLADE SHAFT SUPPORTED BY TWO HEAVY-DUTY, SELF-ALIGNING PILLOW BLOCK BEARINGS DEPTH CONTROL ASSEMBLY ENGINEERED FOR SMOOTH, CONTROLLED BLADE INSERTION DURABLE 8" x 2-1/4" NON-SLIP RUBBER WHEELS WITH MAINTENANCE-FREE HUBS AND ROLLER BEARINGS POSITIVE-LOCKING DEPTH CONTROL MECHANISM ONE-YEAR WARRANTY! (GAS-POWERED ENGINES ARE WARRANTIED THROUGH ORIGINAL MANUFACTURER)
86
ENGINE:
Honda (Gas)
POWER:
GX390 Cyclone
ARBOR SIZE:
1" (25mm)
BLADE CAPACITY:
18" (457mm)
BLADE RPM:
2,700
DEPTH OF CUT:
6-5/8" (168mm)
DIMENSION:
(L)42" x (W)25" x (H)39"
WEIGHT:
223 lbs. (101 kgs)
ALSO AVAILABLE FOR SPECIAL ORDER:
PA1814KS - with 14HP Kohler engine PA1813SS - with 13HP Subaru engine PA1813HP - Premium version of PA1813HS includes built-in depth gauge, tach/hour meter and lifting bail
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
& ACCESSORIES
PROFESSIONAL GAS POWERED SAWS
NEW! 20" GAS POWERED CONCRETE SAW SELF-PROPELLED PART# PA2013HSP
FEATURES: CHASSIS MADE FROM ONE-PIECE BOX CONSTRUCTION WITH 3/16" HOT-ROLLED STEEL THAT WILL NOT FLEX DURING OPERATION POWDER-COATED CHASSIS RESISTS PEELING AND CORROSION CAST-ALUMINUM BLADE GUARD STAINLESS STEEL WATER SYSTEM SUPPLIES WATER TO BOTH SIDES OF BLADE BLADE GUARD MOUNTS ON EITHER LEFT- OR RIGHTHAND SIDE OF SAW AND CUTS WITHIN 2" OF WALL OR CURB HEAVY-DUTY BLADE SHAFT WITH TWO 1-3/16", SELFALIGNING PILLOW BLOCK BEARINGS DEPTH CONTROL ASSEMBLY ENGINEERED FOR SMOOTH, CONTROLLED BLADE INSERTION BUILT-IN TACH/HOUR METER DEPTH FEED GAUGE INDICATOR
ENGINE:
Honda (Gas)
POWER:
GX390 Cyclone
STARTER:
Pull
FUEL CAPACITY:
1.6 gallons
ARBOR SIZE:
1" (25mm)
BLADE CAPACITY:
20" (500mm)
BLADE RPM:
3,400
ARBOR SIZE:
1" (25mm)
DIMENSION:
(L)46" x (W)26" x (H)37"
WEIGHT:
310 lbs. (101 kgs)
HEAVY-DUTY HYDROSTATIC TRANSMISSION WITH VARIABLE SPEED DRIVE DURABLE 8" x 2-1/4" NON-SLIP RUBBER WHEELS WITH MAINTENANCE-FREE HUBS AND ROLLER BEARING FORWARD TRAVEL SPEED: 0-80'/MINUTE
ALSO AVAILABLE FOR SPECIAL ORDER:
PA2014KSP - with 14HP Kohler engine PA2013SSP - with 13HP Subaru engine
ONE-YEAR WARRANTY! (GAS-POWERED ENGINES ARE WARRANTIED THROUGH ORIGINAL MANUFACTURER)
87
CORE BITS PROFESSIONAL GAS POWERED SAWS
EQUIPMENT, SAWS
NEW! 20" GAS POWERED CONCRETE SAW SELF-PROPELLED WITH ELECTRIC START PART# PA2020HSP
FEATURES: CHASSIS MADE FROM ONE-PIECE BOX CONSTRUCTION WITH 3/16" HOT-ROLLED STEEL THAT WILL NOT FLEX DURING OPERATION POWDER-COATED CHASSIS RESISTS PEELING AND CORROSION CAST-ALUMINUM BLADE GUARD STAINLESS STEEL WATER SYSTEM SUPPLIES WATER TO BOTH SIDES OF BLADE BLADE GUARD MOUNTS ON EITHER LEFT- OR RIGHTHAND SIDE OF SAW AND CUTS WITHIN 2" OF WALL OR CURB HEAVY-DUTY BLADE SHAFT WITH TWO 1-3/16", SELFALIGNING PILLOW BLOCK BEARINGS DEPTH CONTROL ASSEMBLY FOR SMOOTH CONTROLLED BLADE INSERTION
ENGINE:
Honda (Gas)
POWER:
GX620 V-Twin
STARTER:
Electric
FUEL CAPACITY:
1.6 gallons
ARBOR SIZE:
1" (25mm)
BLADE CAPACITY:
20" (500mm)
BLADE RPM:
2,850
DEPTH OF CUT:
7-5/8" (194mm)
DIMENSION:
(L)46" x (W)26" x (H)37"
WEIGHT:
392 lbs. (178 kgs)
BUILT-IN TACH/HOUR METER DEPTH FEED GAUGE INDICATOR HEAVY-DUTY HYDROSTATIC TRANSMISSION WITH VARIABLE SPEED DRIVE DURABLE 8" x 2 1/4" NON-SLIP RUBBER WHEELS WITH MAINTENANCE-FREE HUBS AND ROLLER BEARING
ALSO AVAILABLE FOR SPECIAL ORDER:
PA2022SSP - with 22HP Subaru engine
FORWARD TRAVEL SPEED: 0-80'/MINUTE ONE-YEAR WARRANTY! (GAS-POWERED ENGINES ARE WARRANTIED THROUGH ORIGINAL MANUFACTURER)
88
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
& ACCESSORIES
PROFESSIONAL CORE DRILL RIGS
NEW! CORE DRILL RIGS PART# PACR90 without vacuum base PART# PACRV90 with vacuum base
#PACR90
FEATURES: PRECISION RACK-&-PINION CARRIAGE WITH MAINTENANCE-FREE DOUBLE-SEALED BEARINGS 2-1/2" STEEL COLUMN WITH CEILING JACK #PACRV90
LIGHTWEIGHT CAST-ALUMINUM BASE WITH BUILT-IN WHEELS POSITIVE ANCHORING FOR VERTICAL & HORIZONTAL DRILLING
MOTOR:
120V Milwaukee 4090 15A Shear Pin
BIT CAPACITY:
1/2" x 14" (16" with motor spacer)
BIT FEED:
27" (686mm)
MOTOR SPINDLE:
1-1/4" - 7
COLUMN:
2-1/2" x 2-1/2" Adjustable rack and pinion
DIMENSION:
(L)19" x (W)24" x (H)46"
WEIGHT:
(PACR90) 90 lbs. • (PACRV90) 109 lbs. including pump
CONTROL BOX WITH AMP METER FEED HANDLE CAN BE MOUNTED ON EITHER SIDE FOR EASY DRILLING CLOSE TO WALLS AND COLUMNS ONE-YEAR WARRANTY! (MOTORS ARE WARRANTIED THROUGH ORIGINAL MANUFACTURER)
ALSO AVAILABLE FOR SPECIAL ORDER: WITHOUT VACUUM:
WITH VACUUM:
PACR94 - with Milwaukee 4094 20A Shear Pin
PACRV94 - with Milwaukee 4094 20A Shear Pin
PACR96 - with Milwaukee 4096 20A Slip Clutch
PACRV96 - with Milwaukee 4096 20A Slip Clutch
PACR97 - with Milwaukee 4097 15A Slip Clutch
PACRV97 - with Milwaukee 4097 15A Slip Clutch
89
CORE BITS PROFESSIONAL FLOOR GRINDERS
EQUIPMENT, SAWS
NEW! 10" SINGLE-HEAD FLOOR GRINDER PART# PA10SDG FEATURES: UTILIZES (1) 10- OR 20 SEGMENT 10"-DIAMETER DIAMOND GRINDING DISCS TO LEVEL, SMOOTH OR CLEAN THE TOP SURFACE OF CONCRETE SLABS PROVIDES A SMOOTHER FINISH COMPARED TO OTHER METHODS SUCH AS SCRARIFYING OR SCRABBLING TWO-POSITION WHEEL CARRIAGE FRONT TAPER FOR ENHANCED VISIBILITY REMOVABLE NOSE WEIGHT FOR EASY TRANSPORTATION DUST SHROUD CONTAINS GRINDING DEBRIS WATER CONTROL VALVE IS INCLUDED FOR WET GRINDING WORKS ON CONCRETE SLABS, TERRAZZO, CERAMIC TILE FLOORS, BRICK AND STONE ONE-YEAR WARRANTY! (GAS-POWERED ENGINES ARE WARRANTIED THROUGH ORIGINAL MANUFACTURER)
90
ENGINE:
Honda (Gas)
POWER:
GXV340
DISC RPM:
980
DISC CAPACITY:
10" (254mm)
BALLAST:
70 lbs. (32kgs)
DIMENSION:
(L)40" x (W)16" x (H)42"
WEIGHT:
212 lbs. (96 kgs.)
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
& ACCESSORIES
PROFESSIONAL FLOOR GRINDERS
NEW! 10" DOUBLE-HEAD FLOOR GRINDER PART# PA10DDG FEATURES: USES (2) 10- OR 20 SEGMENT 10"-DIAMETER DIAMOND GRINDING DISCS TO LEVEL, SMOOTH OR CLEAN THE TOP SURFACE OF CONCRETE SLABS PROVIDES A SMOOTHER FINISH COMPARED TO OTHER METHODS SUCH AS SCRARIFYING OR SCRABBLING COUNTER ROTATING DISCS PROVIDE BALANCED TORQUE TO PREVENT PULLING LEFT OR RIGHT CAN ALSO BE USED TO LEVEL SMALL AREAS OF UNEVEN JOINTS OR HIGH SPOTS OF 1/16 TO 1/8 INCH A 22" GRINDING WIDTH MAKES FOR QUICK REMOVAL WIDE ERGONOMICALLY DESIGNED T-GRIP HANDLE FOR EASY HANDLING AND MANEUVERING DUST SHROUD CONTAINS GRINDING DEBRIS 2" VACUUM PORT FOR DUST-FREE OPERATION WATER CONTROL VALVE IS INCLUDED FOR WET GRINDING TWO-POSITION WHEEL CARRIAGE FOR GRINDING AND EASY TRANSPORT WORKS ON CONCRETE SLABS, TERRAZZO, BRICK, STONE AND CERAMIC TILE FLOORS ONE-YEAR WARRANTY! (GAS-POWERED ENGINES ARE WARRANTIED THROUGH ORIGINAL MANUFACTURER)
ENGINE:
Honda (Gas)
POWER:
GXV340
DISC RPM:
550
DISC CAPACITY:
10" (254mm)
DIMENSION:
(L)50" x (W)24" x (H)40"
WEIGHT:
234 lbs. (106 kgs.)
91
CORE BITS PROFESSIONAL FLOOR SCRAPERS
EQUIPMENT, SAWS
NEW! FLOOR SCRAPER PART# PA1FS FEATURES: STURDY DESIGN FOR REMOVAL OF CARPET, VINYL, ADHESIVES AND COATINGS HIGH STRESS, 7/8” SHAFT WALK-BEHIND SCRAPER WITH ADJUSTABLE HANDLE HEIGHT REAR WHEELS ADJUST FOR IDEAL BLADE ANGLE ACCOMMODATES BLADE WIDTHS UP TO 12" LABOR AND TIME-SAVING PROCESS FOR RESIDENTIAL AND LIGHT COMMERCIAL PROJECTS NOSE WEIGHT HELPS KEEP BLADE UNDERNEATH FLOOR COVERINGS RESULTING IN GREATER EFFICIENCY ONE-YEAR WARRANTY!
HORSEPOWER:
1 HP
VOLTAGE:
110 V/220 V 50/60 Hz
AMPS:
14
DIMENSION:
(L)24" x (W)12" x (H)43" (20" without handle)
WEIGHT:
126 lbs. (57 kgs.)
REPLACEMENT BLADES: BLADE 7-3/8" x 3" PART #PAFS-7 BLADE 10" x 3" PART #PAFS-10
92
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
& ACCESSORIES
PROFESSIONAL FLOOR SCRAPERS
PORTABLE MULTI-PURPOSE FLOOR SCRAPER PART# MPS100
COMPACT and LIGHTWEIGHT, ONLY 26 LBS! FEATURES: EASILY MANEUVERS AROUND TIGHT SPACES. REMOVES: CARPETING, UNDERPADDING, LINOLEUM, VINYL TILES, GLUE AND MORE! IDEAL FOR NEW FLOOR COVERING PREPARATION. EASY TO HANDLE AND TRANSPORT. CAN BE USED ON STAIRS. REMOVABLE HANDLE (INCLUDED). BLADES INCLUDED.
Cushion Floor
Parquetry
Vinyl Tiles
Rubber Pad
NOT AVAILABLE IN CANADA
INCLUDED WITH SCRAPER: Instruction manual; Envelope containing the following: (1) Parquetry blade, (1) Holder for parquetry blade, (1) 5" blade, (1) Holder for 5" blade, (1) 9" blade, (1) Holder for 9" blade, (2) Side blades - 1 left x 1 right, and (1) 10mm screwdriver.
REPLACEMENT BLADES:
Available with: Vinyl Base Removal Attachment
THREE-YEAR MOTOR WARRANTY! SIX MONTHS PARTS.
LEFT LATERAL BLADE PART #MPS0015L RIGHT LATERAL BLADE PART #MPS0015R
BLADE 5 x 1" Box of 10 PART #MPS0014 BLADE 9 x 1" Box of 10 PART #MPS0013 BLADE 5 x 4" Box of 3 PART #MPS0031
93
CORE BITS TILE ACCESSORIES
EQUIPMENT, SAWS
NEW! GET THE JOB STARTED RIGHT!
The Roto-Wedge Spacer™ is dynamic and easy to use. It is efficient and provides more accuracy than basic wedges, shims, wood or cardboard scraps. The innovative design prevents the installer from hitting the wall, giving you full usage of the wedge. Simply rotate to the exact space you need. The Roto-Wedge Spacer™ is the perfect spacing solution for masonry, stone, tile and more.
Patents: U.S.A. - D616,725 S Canada - 136423 E.U. - MCF-27182
ROTATING PROVIDES THE EXACT SPACING FOR YOUR JOB!
NO MORE HITTING THE WALL!
NO MORE STACKING WEDGES!
FOR MASONRY
ELIMINATES ROCK AND CARDBOARD SPACERS!
FOR TILE
Fast and efficient - Increases productivity • Designed to support stone and tile on vertical applications. • Spacing thickness: Blue small 1/64 - 1/4" (0.4 - 6.3mm); Green large 1/16 - 7/8" (1.6 - 22.2mm) • Ideal for leveling starter courses. • Great to maintain the gaps between countertop slabs and the wall while it cures. • Easily create any space for masonry, stone, tile and more.
94
PT. NUMBER
SPECS
RWT75
Blue small wedge (75/pack) • 1/64 - 1/4" (0.4 - 6.3mm)
RWM25
Green large wedge (25/pack) • 1/16 - 7/8" (1.6 - 22.2mm)
QUALITY ABRASIVES, DIAMONDS AND EQUIPMENT
FOR STONE
& ACCESSORIES
TILE ACCESSORIES
2-PIECE SYSTEM THAT VIRTUALLY ELIMINATES LIPPAGE DURING TILE INSTALLATION.
PATENT PENDING PT. NUMBER
NEW! WING STRAP
• Designed to help virtually eliminate lippage in ungauged tile with up to 2mm difference. • 1/2" notched trowel (or greater) is recommended. • Ideal for flat surfaces.
TLSSTRAP200 TLSSTRAP500 TLSSTRAP1000 NEW! TLSWSTRAP500 NEW! TLSWSTRAP1000 TLSCAP200 TLSCAP500
SPECS
200 Straps/Bucket 500 Straps/Bucket 1000 Straps/Box 500 Wing Straps/Box 1000 Wing Straps/Box 200 Re-usable Caps/Bucket 500 Re-usable Caps/Bucket
ACCESSORIES TLSGUNST Standard Installation Tool TLSERGGUNKIT Ergonomic Performance Installation Tool Kit Includes: Installation tool, holster and case
Strap
Buckets
Standard Installation Tool Cap
• Passes standard industrial (TCNA Robinson) compression test. • Very easy to learn and use at any skill level. • Prevents tiles from moving while curing. • More profitable for the installer. • Re-usable caps. • Recommended for gauged tiles 12" or larger.
Ergonomic Performance Installation Tool Kit
• Reduces installer fatigue/stress. • Virtually lippage free, flat surface drastically reduces the need for grinding and polishing. • Strap (TLSSTRAP) is designed to be used on tiles of uniform thickness only (gauged tile). • Wing Strap (TLSWSTRAP) is designed to be used on ungauged tile with up to 2mm difference.
Distributed by: BEST MATERIALS ® Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.BestMaterials.com Email:
[email protected]
95
