Transcript
T
ECHNICAL INFORMATION Models No.
4323
Description
Jig Saw
New Tool
CONCEPTION AND MAIN APPLICATIONS
Width:74mm(2-15/16")
199mm(7-7/8")
These jig saws are designed to be used for light work. Their brief benefits are; *Least vibration among same class models *More comfortable by large trigger switch, slidable dust cover and positive stop at 45 bevel cut *Chip/sawdust can be collected by connecting to vacuum cleaner Model Variable speed Jig Saw Blade 4322 No B-type 4323 Yes B-type 4322M No Makita-type 4323M Yes Makita-type
207mm
(8-1/8
")
Specifications Voltage (V)
Current (A)
Cycle (Hz)
4.2 3.7 1.9 1.8 1.8
50/60 50/60 50/60 50/60 50/60
100 120 220 230 240 Strokes per minute Max.cutting capacities
Wood
Continuous Rating (W) Input Output 400 225 400 225 400 225 400 225 400 225
4322/4322M 4323/4323M 4322/4323 4322M/4323M
Soft steel Net weight Cord length
Max. Output(W)
3100spm 500 - 3100spm 65mm(2-9/16") 40mm(1-9/16") 6mm(1/4") 18Kg(4.01bs) 2.0m(6.6ft)
Standard equipment Jig Saw Blade B-10 ----------- 1 pc. (4322/4323) Jig Saw Blade No.10---------- 1pc. (4322M/4323M) Hex. Wrench 3----------------- 1pc. The standard equipment may differ from country to country.
Optional accessories
Guide Rule Set Kerf Board Hose Complete 28-1.5 Hose Complete 28-3.0 Jig Saw Blade No.51, SB, 59, B-10-19, B-21-27, B-16L, BR-13 (4322/4323) Jig Saw Blade No.1-5,8-10, 16, 17,41,42,BR-3 (4322M/4323M)
Features and benefits 1.Double insulated 2.See the attached sheet for more information. The standard equipment for the tools shown may differ from country to country.
380 380 380 380 380
Less vibration
Lage trigger switch easy to actuate
Speed adjusting dial 4323/4323M only
Slidable dust cover prevents scattering of chip/saedust
Holding hex. wrench Can be connected to vacuum cleaner
B-type jig saw blade can be attached.(4322/4323)
Makita-type jig saw blade can be attached. (4322M/4323M)
Bevel cut can be performed (45° in left and right) Easy to set at 0°, 45° by postive stops
Guide Rule Set (optional accessory) can be attached Circular cut and straight cut can be performed.
Repair When assembling the housings R/L, securely insert the O ring into the deepest of the housing while using care not to drop the O ring at housing R side.
0 ring
Use care that the polyurethane sponge seal may not be caught in when assembling the housing R/L.
Slider
Polyurethane sponge seal
Cautions in replacing the field : Set the field on the housing L in a direction shown on the below figure.
White
Black
Black
Field
White Fold-back-point
Housing L
White
Field
Black
Housing L
Circuit
drawing
<4322, M434> [Low Voltage] P2
4
White
3
Black
Switch
Field
P1
Cap tire cord
2
White
1
Black
Condenser
[High Voltage] P2
4
White
3
Switch orange color
P1
Cap tire cord
Field
2
Black
1 Chalk coil Condenser
<4323> [Low Voltage] Violet P2
4
3
White
Black
Switch P1
Cap tire cord
White
Field
Controller
Connector at closed end
2
White
1
Black
Black
Condenser [High Voltage] Chaik coil P2
4
3
White
Switch P1
Cap tire cord
2
Violet
White
Field
Controller Black
1
Orange color Condenser
Note : The condenser and chalk coil are not used in some areas. The M434 is only for 100V.
