Transcript
VT/VR7800 SERIES
SPECIFICATION ® IFSTECHNICAL Line / Fiber Transmission
8-CHANNEL DIGITALLY ENCODED VIDEO MULTIPLEXER
FICATIONS
CONNECTORS
VT/VR7800 Series
ut: Output Channels: h: al Gain: al Phase:
1 volt pk-pk (75 ohms) 8 5 Hz - 6.5 MHz <2% <0.7° <1% 60 dB @ Maximum Optical Loss Budget
Optical: Power: Video:
ST Standard, SC, or FC (see ordering information) Terminal Block with Screw Clamps BNC (Gold Plated Center-Pin)
ELECTRICAL & MECHANICAL Power: Surface Mount: Rack: Number of Rack Slots: Current Protection:
IFS 8-Channel Digitally Encoded Video Multiplexer AL EMITTER: Laser Diode (All Models)
Noise Ratio (SNR):
ENGTH
1310 nm, Multimode 1310 or 1550 nm, Singlemode
R OF FIBERS
1
Circuit Board: Size (in./cm.) (LxWxH) Surface Mount: Rack Mount: Shipping Weight:
OVERVIEW DICATORS
+12 VDC @ 500mA From Rack 3 Automatic Resettable Solid-State Current Limiters Meets IPC Standard 7.0 x 4.9 x 3.0 in., 17.8 x 12.5 x 7.5 cm 7.7 x 5.0 x 3.0 in., 19.6 x 12.7 x 7.5 cm < 2 lbs./0.9 kg
ENVIRONMENTAL STANDARD
FEATURES
MTBF: > 100,000 hours lexer Unit: VR Demultiplexer Unit: Operating Temp: -40° C to +74° C Transmission Transmits 8 Real-Time The IFS VT/VR7800 Series Video Transmitter/Multiplexer and Video • 8-Bit Digitally Encoded Video nc Presence for Each • Video Sync Presence for each Storage Temp: -40° C to +85° C ut Channel Receiver/Demultiplexer Output Channel on Receiver series utilize state-of-the-art 8-bit digital Color Video Signals on One Optical Fiber ut Overload for Each Relative Humidity: 0% to 95% (non-condensing)† • Video Output Overload for Each Video Channel
◆ encoding and• Optical decoding for high-quality video transmission that Exceeds Allconditions Requirements forsuffix RS-250C Carrier Detect/ Link-Lock w/Solid State Relay † May be extended • to condensation by adding ‘–C’ to Medium-Haul model • Operating Power number for conformal coating. exceeds the requirements of EIA RS-250C for Medium-Haul Video Transmission: Extremely High Video Performance Transmission. These environmentally hardened units provideAGENCY COMPLIANCE • Exceptionally Low Video Distortion with Zero Performance Variation TE SENSING Carrier Detect, trans-mission 24VAC/VDC @ 100 of mA eight independent video channels over one multivs. Optical Path Loss mode or singlemode optical fiber and are ideal for use in uncondi• Tested and Certified by an Independent Testing Laboratory for Full tioned road-side or out-of-plant installations. These units areMADE com- IN THE USA with the Environmental Requirements (Ambient Complies with FDACompliance Performance Standard for Laser Products, pletely transparent to and universally compatible with any NTSC, Title 21, Code of Federal Regulations, Subchapter J AL POWER BUDGET Operating Temperature, Mechanical Shock, Vibration, Humidity PAL, or SECAM CCTV camera system. Plug-and-play design with Condensation, High-Line/Low-Line Voltage Conditions OPTICAL MAX. RECEIVER TRANSMITTER ensures ease of installation and no electrical or optical adjustments
annel Power
R
ode µm**
ode m
WAVELENGTH
MODEL MODEL are ever required. LED indicators are provided for rapidly ascertaining equipment operating status and these units are provided in VR7820 VT7820 either a stand alone or a rack-mount configuration. VR7820 VT7820-HP 1310 nm
APPLICATION
VR7830 VR7830 VR7830
VT7830 VT7830-HP VT7830-HP1 EXAMPLES
• High-Performance Multiple-Channel CCTV Transmission VR7850 VT7850 • 1550 Installations with Limited Fiber nm • Conduit with Limited VT7850-HP*** Space for Additional Cabling VR7850
PWR Voltage BUDGET and Transient Protection)DISTANCE* of NEMATS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. 1.2 miles (2 km)▲ 7 dB (1) to Networks Requiring Multiple Physical Layers • Ideally Suited 14 1.2 miles (2 km) dB
Where Video Degradation may be a Problem 12 dB 22 miles (36 km) • Directly Compatible PAL, (51 or SECAM 17 dB with All NTSC, 31 miles km) CCTV Camera Systems 23 dB 43 miles (69 km) • Wide Optical Dynamic Range: Optical Attenuators are Never 30 miles (48 km) 12 dB Required
• LED Status Indicators Provide Rapid Indication of Critical Operating 42 miles (68 km) 17 dB Parameters ansmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. • Solid-State Current Limiters on All Power Lines transmission distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget. Provide Unconditional Equipment Protection -HP requires a minimum of 3dB loss to operate. uct may be used with 62.5µm graded index multimode fiber having a maximum run length of 2 km and/or a maximum opticalLifetime loss of 10Warranty dB. • Comprehensive
SYSTEM DESIGN
VT7830-HP 7 other fixed cameras
ifs
up to 30 miles (48 km)
1 Fiber 9/125µm SM
VR7830-HP
ifs
7 other video outputs
interlogix.com TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■
[email protected] 16 Commerce Road ■ Newtown, CT 06470
VT/VR7800 Series
North America T 855-286-8889
Latin America T 561-998-6114
IFS 8-Channel Digitally Encoded Video Multiplexer Ordering Information Part Number
Description
Fibers Required Optical Pwr. Budget
Max. Distance*
Multimode 62.5/125µm**
VT7820
8-Channel Video Transmitter/Multiplexer (1310 nm)
1
7 dB
1.2 miles (2 km)
VR7820
8-Channel Video Receiver/Demultiplexer (1310 nm)
1
Single Mode 9/125µm
VT7830
8-Channel Video Transmitter/Multiplexer (1310 nm)
1
12 dB
22 miles (36 km)
VR7830
8-Channel Video Receiver/Demultiplexer (1310 nm)
1
Accessories ♦
PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. This product may be used with 62.5µm graded index multimode fiber having a maximum run length of 2 km and/or a maximum optical less of 10 dB. ♦ All accessories are third party manufactured.
GE Security
Specifications Video Video Input: Input/Output Channels: Bandwidth: Differential Gain: Differential Phase: Tilt: Signal-to-Noise Ratio (SNR): Optical Emitter:
1 Volt pk-pk (75 ohms) 8 5 Hz - 6.5 MHz <2% <0.7° <1% 60 dB @ Maximum Optical Loss Budget Laser Diode (All Models)
Wavelength 1310 nm, Multimode 1310 or 1550 nm, Singlemode Number of Fibers 1 LED Indicators VT Multiplexer Unit:
VR Demultiplexer Unit:
• Video Sync Presence for Each Video Input Channel • Video Input Overload for Each Video Channel • Operating Power • Video Sync Presence for each Output Channel on Receiver • Video Output Overload for Each Video Channel • Optical Carrier Detect/Link-Lock w/Solid State Relay • Operating Power
Remote Sensing Closed with Carrier Detect, 24VAC/VDC @ 100 mA Connectors Optical: Power: Video: Electrical & Mechanical Power: Surface Mount: Rack: Number of Rack Slots: Current Protection: Circuit Board: Size (in./cm.) (LxWxH) Surface Mount: Rack Mount: Shipping Weight: Environmental MTBF: Operating Temp: Storage Temp: Relative Humidity:
ST Terminal Block with Screw Clamps BNC (Gold Plated Center-Pin) 12 VDC @ 500 mA (stand-alone) +12 VDC @ 500 mA From Rack 3 Automatic Resettable Solid-State Current Limiters Meets IPC Standard 7.0 x 4.9 x 3.0 in., 17.8 x 12.5 x 7.5 cm 7.7 x 5.0 x 3.0 in., 19.6 x 12.7 x 7.5 cm < 2 lbs./0.9 kg > 100,000 hours -40° C to +74° C -40° C to +85° C 0% to 95% (non-condensing)
NOTE: All optical terminations need to be epoxy polished with a minimum back reflection of -30dB.
North America T 888-GE-SECURITY 888-437-3287 F 503-691-7566 E
[email protected] Asia T 852-2907-8108 F 852-2142-5063 Australia and New Zealand T 613-9239-1200 F 613-9239-1299 Europe T 44-113-238-1668 F 44-113-253-8121 Latin America T 305-593-4301 F 305-593-4300 gesecurity.com/ifs Specifications subject to change without notice
Agency Compliance
© 2008 General Electric Company Complies with FDA Performance All Rights Reserved Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
Made in the USA Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
Ordering Information Part Number D1010 interlogix.com
D1010WDMA✧ Multimode D1010WDMB 62.5/125µm** Specifications subject to change without notice.
D1020 © 2014 United Technologies Corporation All rights reserved. D1030 Interlogix is part of UTC Building & Industrial Systems, ✧ Single Mode D1030WDMA a unit of United Technologies Corporation. 9/125µm D1030WDMB
De
RS RS RS RS
RS RS RS
VT/VR7800 Series
Accessories♦
PS-12VDC 12 Volt DC Plu PS-12VDC-230 12 Volt D
Options
Add ‘-R3’ to Model Num
