Transcript
Laser Diode
calemitters
1
mberoffibers
nectors cal: er: o:
IFS Line / Fiber Transmission ®
ST, SC or FC (see ordering information) Terminal Block with Screw Clamps BNC (Gold Plated Center-Pin)
trical&Mechanical er: ace Mount: k: mber of Rack Slots: ent Protection: uit Board: (in./cm.) (LxWxH) ace Mount: k Mount: ping Weight:
VT/VR7200 Series
12 VDC @ 500 mA (Surface Mount) From Rack 2 Automatic Resettable Solid-State Current Limiters Meets IPC Standard 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm < 2 lbs./0.9 kg
IFS 2-Channel Digital Video Multiplexer
ronmental F: rating Temp: age Temp: tive Humidity:
> 100,000 hours -40° C to +74° C -40° C to +85° C 0% to 95% (non-condensing)†
y be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
OVERVIEW
STANDARD FEATURES
The IFS VT/VR7200 Series multiplexers simultaneously transmit
• 8-Bit Digitally Encoded Video Transmission Transmits 2 Real-Time Color Video Signals two channels of video over one optical fiber utilizing 8-bit digital encoding for high-quality video transmission. These products • Exceeds RS-250C Medium-Haul Transmission Performance exceed EIARS-250C for Medium-Haul Video Transmission Standard Directly Compatible with All NTSC, PAL, or SECAM performance requirement. The modules are universally compatible CCTV Camera Systems with major CCTV camera manufacturers. Plug-and-play design • LED Status Indicators Provide Indication of Critical Operating ensures ease of installation requiringFibersRequired no electrical or optical Parameters OpticalPwr.Budget Max.Distance* adjustments. The modules incorporate Power, Receiver Locked • Tested and Certified by an Independent Testing Laboratory for Full and Video Presence Status indicating Compliance with the Environmental Requirements (Ambient Transmitter (1310 nm) 7 dB 1 LED’s to monitor proper 1.2 miles (2 km)*** Mechanical Shock, Vibration, Humidity Receiver (1310 nm) system operation. The modules are available in either stand-alone Operating Temperature, or rack mount versions. with Condensation, High-Line/Low-Line Voltage Conditions and Transmitter (1310 nm) 1 Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans 17 dB 31 miles (51 km) Receiver (1550/1310 nm) Specification for Traffic Signal Control Equipment. • Solid-State Current Limiters on All Power Lines Provide Equipment ded) APPLICATION EXAMPLES Protection 30 VAC Input (Included if specified at time of order) • Exceeds NEMA TS-1/TS-2 and Caltrans Traffic Signal Control No Charge (Requires • CCTVR3 Rack purchased separately) Equipment ctor - (For Single Mode Equipment and Rack Mount only) ards (Extra charge, consult factory) • Compatible with Major CCTV Camera Manufactures or (Single Mode Equipment only) • No In-field Electrical or Optical Adjustments Required • bandwidth. Hot-Swappable Rack Modules dditional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber • Automatic Resettable Fuses on all Power Lines ng • Comprehensive Lifetime Warranty
System Design
SYSTEM DESIGN up to 1.2 miles (2 km) VT7220 2 Video Inputs
ifs 203.426.1180
VR7220
International
ifs
Fiber Systems Incorporated
1 Fiber 62.5/125m MM
203.426.1180
International Fiber Systems Incorporated
2 Video Outputs
interlogix.com
VT/VR7200 Series
North America T 855-286-8889
Latin America T 561-998-6114
IFS 2-Channel Digital Video Multiplexer
Ordering Information Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
Multimode 62.5/125µm**
VT7220
2-Channel Video Transmitter (1310 nm)
1
7 dB
1.2 miles (2 km)***
VR7220
2-Channel Video Receiver (1310 nm)
1
7 dB
1.2 miles (2 km)***
Single Mode 9/125µm
VT7230
2-Channel Video Transmitter (1310 nm)
1
17 dB
31 miles (51 km)
VR7230
2-Channel Video Receiver (1550/1310 nm)
1
17 dB
31 miles (51 km)
Accessories ♦
PS12VDC1.5A-U
12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. *** This product may be used with 62.5 µm graded index multimode fiber having a maximum run length of 2 km and/or a maximum optical loss budget of 10 dB. *All accessories are third party manufactured.
GE Security
Specifications Video Video Input:
1 Volt pk-pk (75 ohms)
Bandwidth:
10 Hz - 6.5 MHz
Differential Gain:
<2%
Differential Phase:
<0.7°
Tilt:
<1%
Signal-to-Noise Ratio (SNR):
>60 dB @ Maximum Optical Loss Budget
Wavelength 1310/1550 nm, Multimode 1310/1550 nm, Single Mode Optical Emitters Laser Diode Number Of Fibers 1 Connectors
North America T 888-GE-SECURITY 888-437-3287 F 503-691-7566 E
[email protected] Asia T 852-2907-8108 F 852-2142-5063 Australia and New Zealand T 613-9239-1200 F 613-9239-1299 Europe T 44-113-238-1668 F 44-113-253-8121 Latin America T 305-593-4301 F 305-593-4300
Optical:
ST
Power:
Terminal Block with Screw Clamps
gesecurity.com/ifs
Video:
BNC (Gold Plated Center-Pin)
Specifications subject to change without notice
Electrical & Mechanical
Agency Compliance
Power: Surface Mount:
12 VDC @ 500 mA (Surface Mount)
Rack:
From Rack
Number of Rack Slots:
2
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Size (in./cm.) (LxWxH) Surface Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount:
7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Shipping Weight:
< 2 lbs./0.9 kg
Environmental MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C
Storage Temp:
-40° C to +85° C
Relative Humidity:
0% to 95% (non-condensing)
© 2008 General Electric Company Complies with FDA Performance All Rights Reserved Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
Made in the USA Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
Ordering Information Part Number D1010 interlogix.com
D1010WDMA✧ Multimode D1010WDMB 62.5/125µm** Specifications subject to change without notice.
D1020 © 2014 United Technologies Corporation All rights reserved. D1030 Interlogix is part of UTC Building & Industrial Systems, ✧ Single Mode D1030WDMA a unit of United Technologies Corporation. 9/125µm D1030WDMB
De
RS RS RS RS
RS RS RS
VT/VR7200 Series
Accessories♦
PS-12VDC 12 Volt DC Plu PS-12VDC-230 12 Volt D
Options
Add ‘-R3’ to Model Num
