505u-2 Wireless I/o

Transcript

Technical Data TD032087EN Effective January 2014 505U-2 Wireless I/O One-way, low-power transmitter Description The ELPRO 505U-2 Wireless I/O is a small I/O transmitter that extends long-range, license-free communications to sensors in local, remote, or difficult-to-reach locations. Designed for low power consumption and easy attachment of ELPRO BU-5 battery packs, the ELPRO 505U-2 provides reliable continuity for industrial applications with power constraints. Capable of transferring analog, pulse, or discrete inputs, and powering a loop-powered analog device (12 Vdc, 50 mA), the transmitter is highly reliable and simple to deploy. Features • 405–490 MHz frequency, up to 500 mW RF Power • Link process inputs to single or multiple outputs (peer-to-peer) • Multiple power supply options including battery-only supply with ultra-low power consumption (reverts to sleep mode) • Input-only transmitter unit (2 DI/PI, 1 AI), connects to multi I/O and/or gateway units • Peer-to-peer communications with exception reporting and reliable self-checking via update time • External inputs plus internally calculated values, including analog set point status, pulse rate and pulse total, power/battery supply voltage, and power supply alarm • Configurable repeat transmissions to five times for message reliability Applications • High-level alarms • Security gate control • Emergency shower notification • Flow meter monitoring • Storage tank monitoring • Pipeline cathodic protection • Pump stop-start • Lighting bank control • Power reticulation relay-fault notifications • Weather station reporting • Bearing condition monitoring Technical Data TD032087EN 505U-2 Wireless I/O   Effective January 2014 Specifications Ordering SPECIFICATION DESCRIPTION Transmitter and Receiver Frequency 405–490 MHz a b Transmit power 10 mW–500 mW Transmission Frequency modulation (FM) Modulation Digital frequency shift key (DFSK) Channel spacing 12.5 kHz Data rate 3600 bps 6.2 miles (10 km) @ 500 mW EIRP Range (LOS) c 3.1 miles (5 km) @ 100 mW EIRP 1.2miles (2 km) @ 10 mW EIRP Antenna connector BNC female coaxial Input and Output Digital inputs TTL voltage input, surge-protected, non-isolated, voltage-free/NPN contacts, 0.5 seconds debounce time, 2 DI (external, status) Analog inputs 0–20 mA or 0–10 mA, floating differential inputs, common mode voltage 15V, 12-bit resolution, <0.1% accuracy, 12 Vdc @ 50 mA for external loops provided, transducer warm-up time configurable up to 255 seconds Pulse inputs Per digital input specifications above, 100 Hz maximum pulse rate, 3ms pulse width minimum, 2 PI (pulse total, count, rate) Serial Port RS-232 9-pin DB-9 female connector (use for programming only) Data rate 9600 bps Serial settings 8 data bits, 1 stop, no parity Protocols and Configuration System address Configurable system address Protocols supported ELPRO WIBnetTM up to four retries, CRC error checking User configuration E-Series configuration utility Configurable Individual input mappings, analog and digital debounce, parameters analog sample time, analogue warm-up time, update time, analog set points and sensitivities Power management settings LED Indication and Diagnostics LED Indication TX/radio; OK/operation Refer to product manual for more information Reported Diagnostics I/O status General Size 6.7" x 2.5" x 1.4" (170 mm x 64 mm x 36 mm) Housing Powder-coated aluminum Environmental IP65 Mounting Panel mount/connector and cable lead Terminal blocks Weatherproof connector included Temperature rating –4 to +140°F (–20 to +60°C) Humidity rating 0–99% RH noncondensing Weight 1 lb (500g) Power Supply Nominal supply 11.5 to 15 Vdc, over voltage/reverse power protection Average current draw 10 mA @ 12 Vdc (idle) + analog loop current Sleep mode 120 μA Transmit current draw 170 mA @ 250 mW, 100 mA @ 100 mW, 50 mA @ 10 mW Battery (Optional 6 x AA alkaline batteries 9V, up to 1.4-year service life ELPRO BU5-2) depending on input configuration Enclosure specifications as per 505U-2 enclosure Temperature dependent on battery type PRODUCT CODE 505U-2-E NNote: Power consumption is dependent on unit configuration. a Specify RF power and Frequency at time of order b RF Frequency configuration range is 2 MHz c Line of sight radio range, can be extended with repeaters 2 eaton www.eaton.com DESCRIPTION FREQENCY 2 digital/pulse inputs plus one 405–490 MHz analog input, external 12 VDC power supply RF POWER 500 mW NNote: Specifications are subject to change. Accessories PRODUCT CODE DESCRIPTION Antennas 360–512 MHz UDP400-C 400 MHz dipole antenna, N-type female, 2 dBi gain UDP400-3 400 MHz dipole antenna, BNC male, 0 dBi gain, 9' (3m) coaxial cable BU3-400 Collinear antenna, N-type female, 5 dBi gain DATA SHEET TD032037EN TD032037EN TD032038EN BU6-400 Collinear Antenna, N-type female, 8 dBi gain TD032039EN YU3/6/9/16-400 Yagi antenna, 3/6/16 element, N-type, 10/9/12/15 dBi gain TD032040EN TD032041EN TD032043EN TD032044EN Cables CC3/10/20-SMA/BNC Coaxial cable kit, 9.8' (3m)/32' (10m)/65' (20m), N-type to N-type, SMA male/BNC male CCTAIL-SMA-F/M CCTAIL-BNC-F/M SER-DB9 Surge Diverters CSD-SMA-2500 CSD-N-6000 MA15/D/1/S1 MA15/D/2/S1 IIOP32D Power Supplies BU5-2 PS-DINAC-12DC PSG60E Mounting Brackets BR-YAGI-KIT BR-COL-KIT Coaxial cable tail, 24" (600 mm), SMA to N-type (female/male) Coaxial cable tail, 24” (600 mm), BNC to N-type (female/male) Serial RS-232 cable, DB-9 male to DB-9 female, straight through SMA surge diverter for use with CC10/CC20-SMA Coaxial surge diverter, bulkhead N-type female to N-type female Power supply surge diverter, 110 Vac/15A Power supply surge diverter, 240 Vac/15A Signal surge diverter, 2 x 2-wire/1 x 4-wire TD032019EN TD032020EN TD032021EN TD032023EN TD032022EN TD032026EN TD032030EN TD032031EN TD032029EN TD032032EN IP66 battery pack TD032035EN DIN rail power supply, 100–250 Vac, 12 Vdc/2.5A TD032033EN DIN rail power supply, 85–264 Vac, 24 Vdc/2.5A TD032034EN Mounting bracket kit for Yagi antenna Mounting bracket kit for collinear antenna TD032072EN TD032071EN Technical Data TD032087EN 505U-2 Wireless I/O   Effective January 2014 Eaton’s wireless business www.eaton.com/wireless North America & Latin America 5735 W. Las Positas Suite 100 Pleasanton, CA 94588 United States Telephone: +1 925 924 8500 Australia, New Zealand 9/12 Billabong Street Stafford Queensland 4053 Australia Telephone: +61 7 3352 8600 Southeast Asia 2 Serangoon North Avenue 5 # 06-01 Fu Yu Building, 554911 Singapore Telephone: +65 6645 9888 Europe Hein-Moeller-Straße 7-11 53115 Bonn, Germany Telephone: +49 228 602 5573 China 955 Shengli Road East Area of Zhangjiang High-Tech Park Shanghai, 201201 China Telephone: +86 21 2899 3600 Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com © 2014 Eaton All Rights Reserved Printed in USA Publication No. TD032087EN January 2014 Eaton is a registered trademark. All other trademarks are property of their respective owners.