Preview only show first 10 pages with watermark. For full document please download

51 1089

   EMBED

Share

Transcript

S&S Cycle, Inc. Service Bulletin #36 2000 Revised 2-9-00 ® Box 215 Viola, Wis. 54664 Phone 608-627-1497 • Fax 608-627-1488 Copyright ©, 2000 by S&S Cycle, Inc. All rights reserved. Printed in the U.S.A. Service Bulletin #36 Incorrectly Machined Tappet Guides A limited number of S&S tappet guides for V2 Big Twins were shipped with incorrect machining. These items can be identified by examining the machined areas indicated in the photograph and measuring the distance from the gasket surface to the angle cut. The incorrectly machined guides distort when installed, which causes the lifter to bind. To obtain correct replacement parts, contact an S&S Technical Services Representative at 608627-1497. The representative will issue a Return Authorization (RA) number and arrange a prompt exchange of parts. We regret this inconvenience.