Transcript
LEAD ACID BATTERY CHARGER HBC - 3415 48V Advanced Multi-Stage Battery Charger with MCU
Manson
Optional Accessory: Remote Control Panel (HBR-3100)
Description This series of advanced battery chargers are designed to cover a wide range of battery capacities and battery types. The Micro-Processor Control allows for easy selective charging operations to ensure quick and full charge for your battery type. Smart and extensive fail safe protections plus the thermally controlled charging current make this charger dependable and durable even in adverse ambient conditions. There are essentially 5 charging stages: Soft Bulk, Bulk, Absorption, Float and Standby (power saving). In addition there is a manual or auto Equalization Charge for Flooded battery. The MCU constantly monitors the battery status at all times, it counts the days for auto-Equalization Charge, and days in both Float, Standby mode for auto-recycle charge to keep battery fresh even in long period of inactive service. The soft-ware based power conversion technology allows 2 specific charging profiles be programmed via the USB port from a PC. This user defined charging function is ideal for special charging requirement and other chemical type of battery such as lithium iron phosphate.
Features • Micro-Processor Control (MCU) charging profiles selectively for Wet, LiFePO4, Gel, AGM & Calcium-Calcium lead acid batteries. • 6 charging profiles selections plus 2 user defined profiles for more advanced users. • Supplied with remote battery temperature sensor for precise and safe charging and protection of battery. • Adaptive 5 stage charging according to the real time battery condition at different charging stages. • Two isolated charging terminals for charging two batteries at the same time. • Selectable decrease of charging current from 40 to 90% allows a much wider range of rechargeable battery size (AH). • Extensive fail safe protections for the charger and battery over charging voltage, charger over temperature, battery over temperature, cooling fan malfunction. • Thermal decrease of charger output power to ensure safe operation temperature for the components in hot ambient environment. • Optional Remote Control Panel allows real time monitoring of charging stage, voltage, current, fault condition, total charging time, aggregated charger used hour. ◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa. ◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Manson
DC - DC CONVERTER SDC - 8170 / 8270 Isolated Ground Step Up & Down Converter
Isolated DC-DC converters can provide positive or negative voltages from a single device, and may be also be used with either a positive or a negative input voltage source, as long as the relative polarity of the input to the device is maintained.
Description
Features
This series of Isolated Ground DC-DC converters provide clean and regulated DC power for voltage sensitive devices, eliminate voltage surge due to sudden withdrawal of high current load. It regulates changing input dc voltage to a stable factory preset dc output voltage. Typical applications: DC power conditioning for control and instrumentation, telecommunication and other voltage sensitive electronic equipments, electronic devices such as TFT screens, audio and video equipments. Make up for the voltage drop in long wire running from battery, or due to sudden high current drain on the battery during engine cranking. The high efficiency advanced switching mode circuit design makes convection cooling possible in a compact aluminum extruded casing. The totally enclosed plastic end caps and sealed construction make this robust converter moisture, and dust proof. It can withstand the harsh and humid working environment. The plastic clip-on mounting system makes the installation easy even in a hard to reach tight spot.
• • • • • • • • • • • • • • • • •
Isolated Ground Step up and Step down voltage conversion Regulated stable clean dc power output Input and Output galvanic isolation Slim, compact, light aluminum casing Dust and moisture proof construction High efficiency switching mode design Excellent line and load regulation Low Ripple and Noise High RFI Stability Input under & over voltage protection Short circuit and over load protection by constant current Over temperature protection Reverse polarity protection Loss of earth protection LED indicators of operation and fault status E-Mark Approval
Specifications Models Input Voltage Range Output Voltage
Continuous Output Current Max. Output Current (30 minutes) No Load Current Ripple & Noise (peak-peak) Ripple & Noise (r.m.s.) Load Regulation Line Regulation Efficiency Protections Indicators Input & Output Connection Type Cooling System Max. Operating Temperature Internal Input Fuse (glass type) Approval & Standard Dimensions (WxHxD) Weight Accessory
SDC - 8170 10 - 16VDC 13.5VDC**
SDC - 8270 20 - 32VDC 27VDC** **Other factory preset output voltage within the specified range of 12 to 13.5V for SDC-8170 and 24 to 27V for SDC-8270 is available.** 3A 4A
4.5A 6A <120mA <50mV 10mV 10mV 10mV >86% Reverse Polarity, Overload, Short Circuit, Input under and over voltage and Over Temperature Green LED: Operate Red LED: Fault Push in slip on connectors Natural Convection 40°C 10A E8 77x75x32 mm 3x3x1.3 inch 250g 8.8oz. Clip-on Mounting Bracket set and Screw, Slip-on Push in type Receptacles
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa. ◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
