Transcript
LEAD ACID BATTERY CHARGER HBC - 3130 / 3140 / 3160 12V Advanced Multi-Stage Battery Charger with MCU
Manson
Manson
PV CHARGE CONTROLLER SBC - 2106 / 2106L Sealed Low Power Charge Controller
Optional Accessory: Remote Control Panel (HBR-3100)
Description This series of advanced battery chargers are designed to cover a wide range of battery capacities and battery types. The Micro-Processor Control allows for easy selective charging operations to ensure quick and full charge for your battery type. Smart and extensive fail safe protections plus the thermally controlled charging current make this charger dependable and durable even in adverse ambient conditions. There are essentially 5 charging stages: Soft Bulk, Bulk, Absorption, Float and Standby (power saving). In addition there is a manual or auto Equalization Charge for Flooded battery. The MCU constantly monitors the battery status at all times, it counts the days for auto-Equalization Charge, and days in both Float, Standby mode for auto-recycle charge to keep battery fresh even in long period of inactive service. The soft-ware based power conversion technology allows 2 specific charging profiles be programmed via the USB port from a PC. This user defined charging function is ideal for special charging requirement and other chemical type of battery such as lithium iron phosphate.
Features • Micro-Processor Control (MCU) charging profiles selectively for Wet, LiFePO4, Gel, AGM & Calcium-Calcium lead acid batteries. • 6 charging profiles selections plus 2 user defined profiles for more advanced users. • Supplied with remote battery temperature sensor for precise and safe charging and protection of battery. • Adaptive 5 stage charging according to the real time battery condition at different charging stages. • Two isolated charging terminals for charging two batteries at the same time. • Selectable decrease of charging current from 10 to 90% allows a much wider range of rechargeable battery size (AH). • Extensive fail safe protections for the charger and battery over charging voltage, charger over temperature, battery over temperature, cooling fan malfunction. • Thermal decrease of charger output power to ensure safe operation temperature for the components in hot ambient environment. • Optional Remote Control Panel allows real time monitoring of charging stage, voltage, current, fault condition, total charging time, aggregated charger used hour. ◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa. ◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Description
Features
This series of low powered and cost effective PV Charge Controller is designed for trouble free application in remote high humid environment . The whole unit is potted in Epoxy Resin . It is suitable for seal or wet type lead acid battery and all types of PV modules. The full solid state electronic components using 0 to 100% Pulse Width Modulation charging and power switching by MOSFET assures optimal utilization of sunlight and safe charging of battery . Selection for charging sealed or wet type of battery is made possible by shorting of terminal wire. The SBC2106L is made with Night Light Load DC output .
• • • • • •
Compact size Water resistant Simple to use Electronic Blocking of reverse current to PV module Sealed and Wet type battery connection. Night Light Mode DC output for L version
Specifications Models Battery System Voltage Max. PV Open Circuit Voltage Max. PV Short Circuit Current PWM Set-point Min. Operating Voltage Rated Charging Current Max. Charging Current (5 min.) Rated Load Current Max. Load Current (1 min.) PV Voltage While Load Turn ON PV Voltage While Load Turn OFF Low Battery Shutdown for Load Low Battery Recover for Load Ambient Temperature Range Relative Humidity Approvals Dimensions (WxHxD) Weight
SBC - 2106 SBC - 2106L 12VDC 26VDC 6A Sealed type battery setting: 14.3V ±0.2V, Wet type battery setting: 14.8V ±0.2V 9.5VDC 6A 8A 6A 8A does not have load terminals ≤2V ±0.5V does not have load terminals ≥3.5 ±0.5V does not have load terminals ≤10.8 ±0.5V does not have load terminals ≥12.3 ±0.4V -40 ~ +60°C 100% CE EN 55022 EN 61001 FCC PART 15 Subpart B Class B 97x46x25.5 mm 103g
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa. ◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
DC - DC CONVERTER
Manson
SDC - 6203 Digital Car Power Adapter for iPad & Android based tablets and most mobile devices
Manson
LEAD ACID BATTERY CHARGER HBC - 3130 / 3140 / 3160 12V Advanced Multi-Stage Battery Charger with MCU
Specifications
I
S
Smart Phone
Model AC Input Voltage 200 - 240VAC, 50Hz~ AC Input Current at Full Load at 230AC Output (Charge) Voltage Selections
MP3 Player USB OUTPUT
WET LiFePO4 AGM GEL 1 GEL 2 CALCIUM User Define 1 User Define 2 Equalization Maximum Output Charging Current (continuous)
DC OUTPUT
Tablet
Portable Game Player
Digital Camera
Description
Features
This new digital car power adapter can charge both iPad and Android tablets in addition to the built-in standard USB port for all smart phones and mobile devices such as itouch & etc. The 3 Amp output (with 7 selectable dc voltages) bundled with 7 common DC plugs can provide sufficient regulated dc power to most mobile electronics. The large LCD with backlight shows selected output voltage, vehicle's battery voltage, and power used by load .Your car battery will be protected against over discharge by cutting off the load once battery voltage is lower than the threshold level. User can select the 5 back light color of LCD indicator.
•
Construction
•
Anodized Aluminum alloy casing in standard color charcoal black Measurement: 108mm x 57mm x 17mm Net Weight of unit without accessories: 280g LCD DISPLAY WITH BACK-LIGHT 80mm x 16mm LCD display with 5 user selectable back-light colors Displays: 1. Selected output voltage 2. Digital read out of car battery voltage and L(low), N( Normal), H(High) icons 3. Bar chart to indicate output load current
Specifications • • • • • •
Input DC voltage range: 12V and 24V battery system. Output regulated DC voltage selections: 1.5/ 3/ 4.5/ 5/ 6/ 7.5/ 9/ 12V dc Dual output One DC output, max. current 3A Special USB adapter cable for charging iPad and Android Tablets One USB Port, max. current 0.5A The 3A DC output and the USB port can operate simultaneously Approvals CE EN-55022 2010 EN-55024 2010
• • • • • • • •
Supports charging (up to 1.8A) iPad and Android based tablets via the supplied USB Adapter cable. one for iPhone, Smart phones & etc. Offers 7 DC voltages with up to 3 Amp output Output regulated DC voltage selections : 1.5/ 3/ 4.5/ 5/ 6/ 7.5/ 9/ 12V DC Bundled with 7 sets of common DC plugs. Microprocessor Control and Switching Mode designed Protects car battery from over discharge Universal input (12V and 24V battery system) for car and lorry LCD display shows battery voltage, output voltage and load current. 5 user selectable LCD back-light colors.
Protections • • • • •
Short circuit & overload protection by current limit Input protection with 5 Amp fuse inside the cigar plug Thermal protection Low battery voltage disconnect to cut out power to the loads when battery voltage drops too low Output Over Voltage Protection to protect connected loads , unit shuts down when output voltage is over the selected voltage
Application •
• • •
Converts DC source from the cigar plug of car (12V) or lorry (24V) to power up portable electronics with different DC voltages . Suitable for handheld games, telecom, GPS, Car Video Camera Recorder, camcorders and etc. Built-in USB port is suitable for all cell phones and mobile devices such as iTouch, MP3, etc with USB charging. The supplied converted USB adapter cable set for 3A output can power up all iPads, Android tablets and other large smart phones .
Accessories Standard Accessories A. Input cable (1.5M) with cigarette plug and extra fuse B. Output cable (1.5M) C. Converted USB connector cable for iPad & Android based tablets output D. 7 common DC plugs E. Double sided tape
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa. ◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
P.4
Soft Start Bulk Charge Battery Voltage to Trigger (cut-in) Soft Start Bulk Charge Mode Soft Start Bulk Charge Current Level (current limit) Ripple & Noise (rms) Efficiency at WET (230VAC) Dual Banks (Outputs) Simultaneously Charging two Batteries (The two batteries must be of same chemistry, construction & type) Protections Short Circuit Protection Overload Protection Reverse Polarity Protection (fused) Over Temperature Protection OVP (Output Tracking/ Fixed Over Voltage Protection Selectable) Thermal decrease of charger output power Thermostatically Controlled Variable Speed Fan (0 - full speed) Approvals Charge Cycle, Protection Indication Separate LED for Bulk, Absorption, Float and Fault Mode Charger ON / OFF LED Indicator Power ON / OFF Switch Remote Control & Temperature Sensor Socket Plastic panel & Electro-galvanized steel housing w/Mounting flange
Dimension (WxHxD) Weight Included Accessories (spare fuse, temperature sensor) Optional Accessories (remote control panel) Recommended Battery Capacity Range
HBC - 3130 Yes 2.5A
HBC - 3140 Yes 3.5A
HBC - 3160 Yes 5.0A
Absorption 14.4V 14.6V 14.3V 14.1V 14.3V 15.1V 12V - 16V 12V - 16V 15.5V 30A
40A
60A
<12.3V 15A <50mV >83% Yes
20A <50mV >83% Yes
30A <50mV >83% Yes
Yes Yes Yes Yes Yes Yes Yes CE
EN 60335
Float 13.5V 13.6V 13.2V 13.7V 13.8V 13.8V
Yes Yes Yes Yes Yes Yes Yes EN 55014
Yes Yes Yes Yes Yes Yes Yes EN 62233
Yes Yes Yes Yes Yes 200x80x260 mm 3.2 kg
Yes Yes Yes Yes Yes 200x80x260 mm 3.2 kg
Yes Yes Yes Yes Yes 200x80x320 mm 4.2 kg
Yes Not Included 12AH to 300AH
Yes Not Included 15AH to 400AH
Yes Not Included 20AH to 600AH
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa. ◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
