Preview only show first 10 pages with watermark. For full document please download

524e5ed590943

   EMBED


Share

Transcript

LEAD ACID BATTERY CHARGER HBC - 1315 / 1320 / 1330 24V Advanced Multi-Stage Battery Charger with MCU Manson Manson LEAD ACID BATTERY CHARGER SBC - 9138 / 9238 High Power Smart Battery Charger with LCD Display Description Optional Accessory: Remote Control Panel (HBR-3100) This is a deluxe version of SBC-9138/ 9238, it is designed for more inquisitive users who want to monitor the real time status of the charging stages in a graphic presentation, charging voltage and current, and how much Ampere Hours have been fed into the batteries. Other important information such as selected battery type, setting of maximum charging current, and in the case of fault, type of fault are also displayed in the LCD. The software based MCU control 7 stage smart charger is designed with user friendly features and software plus hardware protections. It is a set, connect and forget charger that ensures complete recharge of your battery. Your battery can be connected indefinitely to the charger which will enter into energy conservation mode to prevent over charging and save electricity bills. The battery state of charge and temperature are closely monitored, updated, & logged by the MCU and the remote temperature sensor mounted on the supplied charger cable and heavy duty battery clamps. Though the charger basically is engineered to charge high capacity battery/ banks, it can be made to charge much smaller battery by selecting the right reduced output setting. This charger can also be converted to a fixed voltage power supply with one simple concealed switch setting. The extensive protections with alarm & LCD indications including the thermostatic decrease of charging current to shut down ensure a durable working life span even in harsh conditions for the charger and the battery. There are selections for Wet, AGM, GEL, and Calcium-Calcium battery types. Special evaluation, re-conditioning charging profiles are made for the Wet type battery. Features • • • • • • • • • Software based MCU control 7 Stage Lead Acid Battery Charger Fixed Voltage Power Supply selectable Selectable for Wet/ AGM/ GEL & Calcium-Calcium batteries showed in LCD Adjustable maximum charging current from 20% to 100% for wide range of Battery AH. Extensive protections with alarm and LCD indications . Auto decrease of charging current in high working temperature to shut down LCD graphic indication for each of the charging stage and the 8 protection status LCD displays real time Charging Voltage, Current & Ampere Hours to battery. Supplied with charging cable and clamp mounted with the wired remote temperature sensor Description This series of advanced battery chargers are designed to cover a wide range of battery capacities and battery types. The Micro-Processor Control allows for easy selective charging operations to ensure quick and full charge for your battery type. Smart and extensive fail safe protections plus the thermally controlled charging current make this charger dependable and durable even in adverse ambient conditions. There are essentially 5 charging stages: Soft Bulk, Bulk, Absorption, Float and Standby (power saving). In addition there is a manual or auto Equalization Charge for Flooded battery. The MCU constantly monitors the battery status at all times, it counts the days for auto-Equalization Charge, and days in both Float, Standby mode for auto-recycle charge to keep battery fresh even in long period of inactive service. The soft-ware based power conversion technology allows 2 specific charging profiles be programmed via the USB port from a PC. This user defined charging function is ideal for special charging requirement and other chemical type of battery such as lithium iron phosphate. Features • MCU control software based adaptive 5 stage charging for Wet, LiFePo4, Gel, AGM, Calcium –Calcium lead acid battery. • Selection of battery type & max. charging current either by optional remote panel or by PC . • Model HBC -1140 and -1160 have two isolated charging terminal with separate voltage detect and total current detect capability. All other models have only one charging terminal. • Optional remote control panel display of : voltage at each terminal, total current, Charging stage, total operation hours, max output set and fault type. • Extensive protection for charger and battery: over charging voltage, charger over temperature, battery over temperature, cooling fan malfunction. • Thermal decrease of charger output power to ensure safe operation temperature for the components in hot ambient environment . Specifications Model AC Input Voltage 200 - 240VAC, 50Hz~ AC Input Current at Full Load (at 230VAC) Output (Charge) Voltage Selections WET AGM GEL CALCIUM Recondition (for WET battery only) Power Supply Mode Maximum Output Charging Current Soft Start Bulk Charge Battery Voltage to Trigger (cut-in) Soft Start Bulk Charge Mode Soft Start Bulk Charge Current Level (current limit) Ripple & Noise (Peak to Peak) Efficiency at WET (230VAC) Protections Short Circuit Protection Overload Protection Reverse Polarity Protection (by Mosfet)) Over Temperature Protection OVP (Output Tracking/ Fixed Over Voltage Protection Selectable) Thermal decrease of charger output power Thermostatically Controlled Variable Speed Fan (0 - full speed) Approvals Charge Cycle, Protection Indication LCD Graphic each Charging Stage and Protection Status Build in temperature sensor in battery clamp Plastic housing w/Mounting flange Dimension (WxHxD) Weight Accessories (Charging Cable with Battery Clamp) Recommended Battery Capacity Range ◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa. ◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE SBC - 9138 Yes 2.9A Absorption 14.4V 14.3V 14.1V 15.1V 15.9V / 3A 13.3V 25A SBC - 9238 Float 13.5V 13.2V 13.7V 13.8V Absorption 28.8V 28.6V 28.2V 30.2V 31.8V / 3A 26.6V 13A <11V 1/2 of the charging current <200mV >85% Yes Yes Yes Yes Yes Yes Yes CE EN 60335 Yes Yes Yes 220x80x140mm 2kg 4.4lbs. Yes 20AH to 250AH ◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa. ◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE EN 55014 <22V EN 62233 8.7x3.2x5.5inch. 10AH to 125AH Float 27.0V 26.4V 27.4V 27.6V Manson LEAD ACID BATTERY CHARGER SBC - 8138 / 8238 High Power Smart Battery Charger with LED Display Manson LEAD ACID BATTERY CHARGER HBC - 1315 / 1320 / 1330 24V Advanced Multi-Stage Battery Charger with MCU Description The software based MCU control 7 stage smart charger is designed with user friendly features and software plus hardware protections. It is a set, connect and forget charger that ensures complete recharge of your battery. Your battery can be connected indefinitely to the charger which will enter into energy conservation mode to prevent over charging and save electricity bills. The battery state of charge and temperature are closely monitored, updated, & logged by the MCU and the remote temperature sensor mounted on the supplied charger cable and heavy duty battery clamps. Though the charger basically is engineered to charge high capacity battery / banks, it can be made to charge much smaller battery by selecting the right reduced output setting. This charger can also be converted to a fixed voltage power supply with one simple concealed switch setting. The extensive protections with alarm & LED indications including the thermostatic decrease of charging current to shut down ensure a durable working life span even in harsh conditions for the charger and the battery. There are selections for Wet, AGM, GEL and Calcium-Calcium battery types. Special evaluation, re-conditioning charging profiles are made for the Wet type battery. Features • • • • • • • • Software based MCU control 7 Stage Lead Acid Battery Charger Fixed Voltage Power Supply selectable Selectable for Wet/ AGM/ GEL and Calcium-Calcium batteries Adjustable maximum charging current from 20% to 100% for wide range of battery AH. Extensive protections with alarm and LED indicators. Auto decrease of charging current in high working temperature to shut down LED indiction for charging stage and protection status Supplied with charging cable and clamp mounted with the wired remote temperature sensor Specifications Model AC Input Voltage 200 - 240VAC, 50Hz~ AC Input Current at Full Load (at 230VAC) Output (Charge) Voltage Selections WET AGM GEL CALCIUM Recondition (for WET battery only) Power Supply mode Maximum Output Charging Current Soft Start Bulk Charge Battery Voltage to Trigger (cut-in) Soft Start Bulk Charge Mode Soft Start Bulk Charge Current Level (current limit) Ripple & Noise (Peak to Peak) Efficiency at WET (230VAC) Protections Short Circuit Protection Overload Protection Reverse Polarity Protection (by Mosfet) Over Temperature Protection OVP (Output Tracking/ Fixed Over Voltage Protection Selectable) Thermal decrease of charger output power Thermostatically Controlled Variable Speed Fan (0 - full speed) Approvals Charge Cycle, Protection Indication LED Indicators for Charging Status, Mode and Fault Build in temperature sensor in battery clamp Plastic housing w/Mounting flange Dimension (WxHxD) Weight Accessories (Charging Cable with Battery Clamp) Recommended Battery Capacity Range SBC - 8138 Yes 2.9A Absorption 14.4V 14.3V 14.1V 15.1V 15.9V / 3A 13.3V 25A SBC - 8238 Float 13.5V 13.2V 13.7V 13.8V Absorption 28.8V 28.6V 28.2V 30.2V 31.8V / 3A 26.6V 13A <11V 1/2 of the charging current <200mV >85% Yes Yes Yes Yes Yes Yes Yes CE EN 60335 Yes Yes Yes 220x80x140mm 2 kg 4.4lbs. Yes 20AH to 250AH ◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa. ◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE EN 55014 <22V Float 27.0V 26.4V 27.4V 27.6V Specifications Model AC Input Voltage 200 - 240VAC, 50Hz~ AC Input Current at Full Load at 230AC Output (Charge) Voltage Selections WET LiFePO4 AGM GEL 1 GEL 2 CALCIUM User Define 1 User Define 2 Equalization Maximum Output Charging Current (continuous) Soft Start Bulk Charge Battery Voltage to Trigger (cut-in) Soft Start Bulk Charge Mode Soft Start Bulk Charge Current Level (current limit) Ripple & Noise (rms) Efficiency at WET (230VAC) Protections Short Circuit Protection Overload Protection Reverse Polarity Protection (fused) Over Temperature Protection OVP (Output Tracking/ Fixed Over Voltage Protection Selectable) Thermal decrease of charger output power Thermostatically Controlled Variable Speed Fan (0 - full speed) Approvals Charge Cycle, Protection Indication Separate LED for Bulk, Absorption, Float and Fault Mode Charger ON / OFF LED Indicator Power ON / OFF Switch Remote Control & Temperature Sensor Socket Plastic panel & Electro-galvanized steel housing w/Mounting flange Dimension (WxHxD) Weight Included Accessories (spare fuse, temperature sensor) Optional Accessories (remote control panel) Recommended Battery Capacity Range HBC - 1315 Yes 2.5A 8.7x3.2x5.5inch. 10AH to 125AH HBC - 1330 Yes 5.0A Absorption 28.8V 29.2V 28.6V 28.2V 28.6V 30.2V 24V - 32V 24V - 32V 31.0V 15A 20A 30A <24.6V 7.5A <50mV >85% 10A <50mV >85% 15A <50mV >84% Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes CE EN 60335 Yes Yes Yes Yes Yes 200x80x260 mm 3.0 kg Yes Not Included 24AH to 150AH ◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa. ◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE EN 62233 HBC - 1320 Yes 3.5A Float 27.0V 27.2V 26.4V 27.4V 27.6V 27.6V EN 55014 EN 62233 Yes Yes Yes Yes Yes 220x80x260 mm 3.0 kg Yes Not Included 32AH to 200AH Yes Yes Yes Yes Yes 200x80x320 mm 3.9 kg Yes Not Included 48AH to 300AH