534134

Transcript

ITEM # MODEL # Warewashing Steam Rack Type Dishwasher with Atmospheric boiler, Energy Saving Device and Duo Rinse - 300 r/hr NAME # SIS # AIA # Main Features Warewashing 534134 (WTM300SRA) Steam Rack type Dishwasher with Atmospheric boiler, ESD and Duo Rinse. Right to Left 300 r/hr 534135 (WTM300SLA) Steam Rack type Dishwasher with Atmospheric boiler, ESD and Duo Rinse. Left to Right 300 r/hr Short Form Specification Item No. Unit to be Electrolux Steam rack type dishwasher with Atmospheric boiler, Energy Saving Device and Duo rinse. Unit to operate from ___ left to right or ____ right to left. Unit to feature built in Energy Saving Device (ESD). ESD permits the unit to operate with COLD WATER. Steam heating. Powerful wash pump and specially designed wash spray arms to guarantee cleaning. Unit to feature 600 mm DUO rinse area with atmospheric built in booster system and built in rinse booster pump thus guaranteeing constant rinse pressure during rinse cycle. Washing is carried out with water circulating at a temperature of 55-65 °C. Rinsing is carried out with clean water coming from the water system, heated to a temperature of 80-90 °C. Unit to have two conveyor speeds which can be selected from the control panel by the operator, 180 racks/hour or 300 racks/hour. Maximum rinse water consumption at 300 racks/hour of only 345 liters/hour of COLD WATER. Unit to feature large heat and noise insulated front counter balanced door in wash and rinse tanks for easy access of internal components. Unit to feature as standard end of day self cleaning cycle. Drain of water from the machine can be done through the control panel. APPROVAL: Electrolux Professional www.electrolux.com/professional [email protected] Warewashing Steam Rack Type Dishwasher with Atmospheric boiler, Energy Saving Device and Duo Rinse - 300 r/hr Steam Rack Type Dishwasher with Atmospheric boiler, Energy Saving Device and Duo Rinse 300 r/hr • Fully independent wash tank avoids rinse aid being siphoned back into the rinse tank, thus guaranteeing low detergent consumption and increased detergent action for perfect washing results. • Washing arms entirely cover the wash tank to constantly provide maximum water contact. • Steam heating • Washing cycle is carried out with water circulating at a temperature of 55-65 °C, whereas the rinsing cycle is carried out with clean water coming from the water system, heated to a max. temperature of 80-90 °C. • Rinse area equipped with DUO-rinse system where the first ramp is filled by the re-used final rinse water, to eliminate any trace of detergent, and the second ramp is filled by hot fresh water to guarantee sanitation of the items. • Powerful 2.2 kW wash pump. • Independent pre-wash zone provides always cold water (at less than 35°C) without chemicals for maximum soil removal. • Built in atmospheric booster system with air break. • Built in rinse booster pump guarantees constant rinse pressure. • Speed of conveyor can be set through the control panel by the operator. 80 racks/hr or 140 racks/hr. • Large counter balanced inspection doors allow unrestricted all round access to the wash and rinse area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss. • Large filters sloping towards the front to the smaller pressed filter box for quick removal. Filters feature holes smaller than the concave ant-block wash nozzles so large food cannot enter and block the wash system. • Adjustable feet for full access underneath the machine for cleaning. • Push button self cleaning cycle of the wash and rinse zones for ease of “end of day” cleaning. • Rinse chamber without internal pipes and therefore no hidden dirt traps. • Wash chamber without internal pipes and therefore no hidden dirt traps. • Self draining wash pumps provide maximum hygiene with no smells and all wash and rinse zones drain automatically at the push of a button. • Heavy duty stainless steel wash pump (impeller and housing). • Deep drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt build up provides fast drainage in only a few minutes. Pressed wash tank with no welded points offer a guaranteed water tight solution. • Dishwasher structure is held together with a solid 50 x 50 mm stainless steel tube sub-frame to provide long term sturdiness. • Pressed pre-wash tank with no welded point and internal pipes offer no hidden dirt traps. Warewashing Steam Rack Type Dishwasher with Atmospheric boiler, Energy Saving Device and Duo Rinse 300 r/hr • All main components made in heavy duty anti-corrosive 304 type Stainless steel: tanks, front and side panels, wash & rinse arms and caps, doors, front, handle and rack transportation system. • Wash and rinse arms can be easily removed for cleaning. • IPX5 water protection. • Autostart/stop ensures that the machine runs only when a rack is passing through it. This reduces both water and energy consumption. • Electronic control panel features large display to read wash and rinse temperatures. • Low water consumption. • Machine predisposed for external detergent and rinse aid connections. • Energy Saving Device (ESD). The ESD is an internal condenser which utilizes the steam generated by the machine in the rinse and wash tanks to heat up incoming cold water. The incoming cold water is heated up to 50 ° C and a built in boiler will heat this water up to 84 °C (min) for the final sanitizing rinse. Construction • Power wash zone with 150 litre wash tank with 2,2kW wash pump supplying upper was arms, 1,1kW wash pump supplying lower was arms. Maximum water contact wash arms for best possible washing result. • Separate 150 litre pre-wash tank with 2,2kW wash pump supplying upper was arms, 1,1kW wash pump supplying lower was arms. Maximum water contact wash arms for best possible pre-washing where first soil scrapping is performed. Pre-wash is separate from wash zone with less than 35°C water without detergent for maximum dirt removal and incorporates automatic partial drain. Optional Accessories • Drain kit for modular and compact rack type dishwashers • Kit of 12 stainless steel plugs for washing arms for modular and compact rack type • Splash hood for rack type, right side • Splash hood for rack type, left side • Steam drying tunnel, 900mm, with door, for modular rack type, right>left (only for 534134) • Steam drying tunnel, 900mm, with door, for modular rack type, left>right (only for 534135) • Basket for 5 half insulated trays 530x370 mm - red • Kit 6 baskets for 1-tank Rack Type dishwashers • Kit 9 baskets for 1-tank Rack Type dishwashers PNC 864150 ❑ PNC ❑ PNC ❑ PNC ❑ PNC 864239 864247 864248 864514 ❑ PNC 864515 ❑ PNC 867005 ❑ PNC 867050 ❑ PNC 867051 ❑ Warewashing Steam Rack Type Dishwasher with Atmospheric boiler, Energy Saving Device and Duo Rinse 300 r/hr Electric Supply voltage: 534134 (WTM300SRA) 534135 (WTM300SLA) Total Installed Power: Key Information: 400 V/3N ph/50 Hz 400 V/3N ph/50 Hz 10.8 kW Steam Steam pressure (min-max): Steam consumption: 1.5 - 3 bar 92 kg\hr Water: Inlet Water supply pressure: Inlet Water Supply Temperature: Inlet Hot Water Supply Temperature for wash section: Inlet Water supply hardness: Incoming Hot water line size (wash section): Incoming Cold/hot Water line size: Drain line size (rinse section): Drain line size (wash section): Hot Water consumption: Liters/hr: Cold/hot Water consumption: Wash Temperature: Wash tank size: Wash pump power: Power Rinse Temperature: Power rinse tank size: Rinse pump power: Initial fill Hot water requirements: Final Rinse Temperature: Final Rinse water flow: Hot water booster capacity: 22 - 102 psi (1.5 - 7 bar) 15 °C 50 °C 4-8 gpg (7-14 °fH) G 3/4" G 3/4" G 1 1/2" G 1 1/2" 15 liters/hr 345 liters/hr 55-65 °C 150 liters 3.3 kW 60-70 °C 23 lt 0.35 kW 112 liters 84 °C 300 liters/hr 12 liters Air Emission: Air Flow: 180 m³/h Unit optionally supplied with extended vent hoods. Exhaust extraction not more than 177 CFM (300 cubic meters/h). Refer to installation diagram for minimum exhaust hood installation height. Productivity racks per hour (max speed): 534134 (WTM300SRA) 300 racks/ 5400 dishes 534135 (WTM300SLA) 300 racks/ 5400 dishes Productivity racks per hour 180 racks/ 3240 dishes (min speed): Table to Table connection: 1773 mm Number of tanks: 2 Height with door open: 2119 mm Charging hole size (width): 530 mm Charging hole size (height): 501 mm External dimensions, Height: 1771 mm External dimensions, Width: 3588 mm External dimensions, Depth: 884 mm Net weight: 534134 (WTM300SRA) 724 kg 534135 (WTM300SLA) 682 kg Shipping weight: 534134 (WTM300SRA) 854 kg 534135 (WTM300SLA) 812 kg Shipping height: 2060 mm Shipping width: 3810 mm Shipping depth: 1040 mm Shipping volume: 8.16 m³ Noise level: <70 dBA Unit predisposed to accept external detergent dispensers, detergent probes and rinse aid dispensers. Warewashing Steam Rack Type Dishwasher with Atmospheric boiler, Energy Saving Device and Duo Rinse 300 r/hr AV = CWI = D = EI = EO = EQ = HWI = SI = Front Front Top Top Air vents SO = Steam outlet Cold Water inlet Drain Electrical connection Electrical Outlet Equipotential screw V = Vents XR = Rinse aid connection Hot water inlet Steam inlet Side AV = CWI = D = EI = EO = EQ = HWI = SI = Air vents SO = Steam outlet Cold Water inlet Drain Electrical connection Electrical Outlet Equipotential screw V = Vents XR = Rinse aid connection Hot water inlet Steam inlet Side Warewashing Steam Rack Type Dishwasher with Atmospheric boiler, Energy Saving Device and Duo Rinse - 300 r/hr The company reserves the right to make modifications to the products without prior notice. All information correct at time of printing. 2016.01.07