Transcript
UHF 500mW EPC C1 G2 WORKABOUT PRO RFID Expansion Module – 100 Pin READING AND WRITING AREA
PHYSICAL DIMENSIONS AND WEIGHT
• Linear antenna (horizontal tag):
(w/o RFID Module) • WORKABOUT PRO C: 8.78” x 2.95”/3.94” x 1.22”/1.65” (223 mm x 75/100 mm x 31/42 mm) • WORKABOUT PRO S: 7.87” x 2.95”/3.94” x 1.22”/1.65” (200 mm x 75/100 mm x 31/42 mm) • Weight (w/o battery pack with Antenna A1 and Antenna A5): WORKABOUT PRO C: 1.15lbs (520 g) WORKABOUT PRO S: 1 lb (455 g) • Weight (w/o battery pack with Antenna A2): WORKABOUT PRO C: 1.18 lbs (535 g) WORKABOUT PRO S: 1.04 lbs (470 g)
PROGRAMMING ENVIRONMENT
REFERENCES • Description: RFID Module UHFCA3-A5 (for North America only, linear antenna) • P/N: 1051585 End cap without GSM shroud
MODEL VARIANTS • WORKABOUT PRO C - Model 7527C-G2 • WORKABOUT PRO S - Model 7527S-G2
PLATFORM • PXA270 520 MHz, 32 bit RISC CPU • 256 MB flash, 128 MB RAM
OPERATING SYSTEM • Microsoft® Windows® CE 5.0 • Microsoft® Windows Mobile® 6.x
RFID UHF MODULE OPTION • CAEN A528 reader inside (Impinj’s Indy™ R1000 Reader Chip) • Multi Regional Programmable Frequency • Output power: 0 to 500mW (27dBm) • Power step control: 10mW, 25mW, 50mW, 100mW, 200mW, 300mW, 400mW, 500mW • Consumption: 1000 mA • Serial link on the 100 pins expansion interface • Antenna: Integrated, Linear polarization • Tag Protocol: ISO 18000-6C, EPC Class1 Gen 2 • Packaging: Multipurpose End Cap
• HTML, XML • Hardware Development Kit (HDK) • Standard Protocol APIs • Windows® sockets (CE.net) • Psion Teklogix Mobile Devices SDK • NET and C++ programming using Microsoft® Visual Studio® 2005 • Java programming supporting JDK 1.2.2 or higher • Psion Teklogix RFID SDK, • NET and C++ programming using Microsoft® Visual Studio® 2005
REGULATORY APPROVALS • Safety: EN60950: 2001, EN 50364: 2001 • EMC: FCC Part 15, Industry Canada EN 301 489-03 v1.4.1, EN 301 489-01 v1.6.1 • Spectrum: FCC Part 15, Industry Canada EN 300 330 v1.1.1
A complete list of accessories is available at: www.psionteklogix.com
APPLICATION SOFTWARE
EXPANSION SLOTS AVAILABLE • One SD/MMC memory card slot – user accessible • Flex cable interface with robust connector: supports POD scanner (serial) and POD imager (USB) modules • One Type II CF Card Slot • Endcap scanners and/or imagers not supported in conjunction with this reader
EXAMPLES OF CLASS 1 GEN2 READING PERFORMANCES FOR ANTENNA A1 • Short Dipole® 93 mm X 11 mm: up to 2000 mm • Web Tag® 30 mm X 50 mm: up to 900 mm • Dog Bone® 93 mm X 23 mm: up to 2500 mm Write distance for Class 1 Gen 2 tags is approximately 50% of the read distance referenced above. • Read distance is a function of the tag type, environmental conditions and surface to which a tag is applied, hence distances may vary. Field testing is recommended for accurate read range determination.
• RFID demo software to read and write tags • RFID Wedge to emulate a Barcode Scanner
USER ENVIRONMENT
Product is ROHS Compliant. * Note this product will carry the CE Mark. * Specifications are subject to change without notice.
(WORKABOUT PRO w/o RFID module) • Withstands 26 drops (on 12 edges, 8 corners, 6 faces) at 5 ft. (1.5 meters) to polished concrete while powered on and configured with accessories such as CF radio, scanner/imager, and pistol grip • Rain/Dust: IP65, IEC 60529 • Operating Temperature: -4°F to 122°F (-20°C to +50°C) • 5%-95% RH non-condensing • Storage Temperature: -40°F to 140°F (-40°C to +60°C)
For more information, please visit www.psionteklogix.com © Psion Teklogix Inc.. Psion Teklogix, Ikôn, NEO, WORKABOUT PRO and Return on Mobility are registered trademarks or trademarks of Psion PLC and subsidiaries. Indy is a trademark of Impinj®, Inc. Other products mentioned in this document may be trademarks of Psion Teklogix Inc. or trademarks or registered trademarks of other software, hardware, or service providers and are used herein for identification purposes only. Windows and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. NA0909
