Transcript
DBF4XLT Dryer Booster Fan FEATURES • Inline Dryer Booster Fan featuring self-cleaning backward curved impeller capable of maintaining an air velocity of 1200 fpm in duct systems up to 130 feet.’ • Galvanized steel housing with powder-coat finish • Integrated Pressure Sensing Switch • Wall-mount indicator panel • Uses 4“ duct
FIVE YEAR
• 5 1/2 foot 120Vac power cord
WARRANTY
• Mounting bracket and hardware included The Fantech DBF4XLT Dryer Booster Fan has been specially designed to solve the problems caused by long duct runs on clothes dryers. According to dryer manufacturers and some local building codes, booster fans should be added in the dryer duct run when the length of the duct exceeds 24 feet with no bends, 20 feet with one bend or 15 feet with two bends. HOW DOES IT WORK: When the dryer is on, Fantech’s patented pressure sensing switch automatically turns the booster fan on. The warm, moist air in the dryer duct is exhausted out of the building quickly. The dryer booster fan monitors the status of the dryer and will turn itself off when the dryer stops. Wall mounted indicator panel with LED display lets homeowners know that fan is fully operational.
Distributed by:
SPECIFICATIONS FAN – Inline fan with galvanized steel housing and baked powder-coat finish. Backward inclined blades of the motorized impeller allow lint to pass through the fan. PRESSURE SWITCH Fantech’s patented pressure switch automatically activates the booster fan when dryer comes on. Includes 18” of pre s s u re sensing tubing with mounting grommet. INDICATOR PANEL Wall-mount, low voltage indicator panel features an LED light that indicates to the homeowner that the fan is working properly. The indicator panel will alert homeowners of problems such as no power, blocked duct, locked motor rotor and low speed conditions. A 50 foot cable is included to connect the indicator panel to the booster fan.
DIMENSIONS AND AIRFLOW All units feature 5 1/2 foot plug-in power cord.
FIVE YEAR WARRANTY
VENTILATION PERFORMANCE
CONTACTS Submitted by:
Date:
Qty:
Model #:
Comments:
Project #: Location: Architect: Engineer: Contractor:
Un it ed Sta te s
Canada
1712 Northgate Blvd. Sarasota, FL 34234 Phone: 800.747.1762; 941.309.6000 Fax: 800.487.9915; 941.309.6099 www.fantech.net;
[email protected]
50 Kanalflakt Way Bouctouche, NB E4S 3M5 Phone: 800.565.3548; 506.743.9500 Fax: 877.747.8116; 506.743.9600 www.fantech.ca;
[email protected]
Art.# 802002 Rev Date: 051806 ©2006 Fantech, Inc. All Rights Reserved.
DBF4XLT Dryer Booster Fan SUBMITTAL DATA • Dryer booster fan shall be capable of maintaining an air velocity of 1200 fpm with an equivalent duct length of 130 feet of 4 inch rigid steel duct.
3/4"
• The dryer booster fan shall be capable of exhausting air up to 75˚C
6 3/8" 3 7/8" 3/4"
• Unit shall have a five year warranty.
313/16"•
• The blower wheel shall be a self cleaning backward curved impeller design.
7/8"
17/8"
9 3/4" Motor shall be a permanently lubricated, enclosed, external rotor design.
• The dryer booster fan shall have a galvanized steel housing with powder coat finish. • A 50 foot cable shall be provided to connect the remote mount indicator panel to the dryer booster fan.
6 3/8" 313/16"
• Unit shall be provided with a 5-1/2 foot long 120 Vac power cord.
9 3/4"
• Dryer booster fan is to be provided with inlet and outlet flanges for connection to 4” duct. 7/8"
C
• Unit shall be CCSAUS listed for use as a dryer booster fan.
R
C
• Unit shall be designed to meet CSA T.I.L. No. G-48.
US
• Quick disconnect duct clamp to be provided. • Galvanized mounting bracket and hardware are to be provided.
FIVE YEAR
• Unit shall be provided with 18” of pressure sensing tubing with mounting grommet.
WARRANTY
• Air delivery shall be as shown below.
• Unit shall include remote-mount, low voltage indicator panel capable of displaying: normal operation, no power, blocked duct, locked motor rotor and low speed conditions. Fan Model
RPM
DBF4XLT
2800
Volts
Max Watts
Max Amps
0"
.125"
Static Pressure in Inches W.G. .25" .375" .5" .75" 1.0"
115
83
0.73
195
181
167
153
141
120
1.25"
1.5"
Max Ps
Duct Dia.
81
55
2.05"
4"
101
Project:
Architect:
Submitted by:
Contractor:
Engineer:
Date:
Fan Position
Model No.
CFM
SP
RPM
Watts/HP
Max Amps
Qty
Optional Equipment
SPECIFICATIONS
WARNING! DO NOT USE IN HAZARDOUS ENVIRONMENTS where fan's electrical system could provide ignition to combustible or flammable materials unless it is specifically built for hazardous environments. Fantech, Inc. reserves the right to substitute material or change product specification.
Item.# 802003 Rev Date: 021306 ©2006 Fantech, Inc. All Rights Reserved.
