Transcript
Model 596T User Guide CONNECTIONS The internal wiring, circuitry, and switch connections of the 596T are shown in Figure 1.
BLUE
HANG-UP BUTTON
PTT/BLK PTT/RED W6
S1
5
W1
6 4 3 1
2 PTT R2 33K R1 300 C1 .1uF
TRANSISTORIZED DYNAMIC HAND-HELD MICROPHONE GENERAL The Shure Model 596T is an amplified, dynamic, hand-held microphone designed for rugged and reliable operation in a variety of mobile and fixed-station communications applications. The 596T has an omnidirectional pickup pattern and provides highly intelligible speech communication in police, fire, taxi, bus, utility, forestry, transportation, industrial, radio-telephone, amateur radio and similar applications. In addition to a clear, crisp, natural voice response, the 596T offers extremely low sensitivity to hum pickup. The unit fits naturally and comfortably in the hand and is not affected by heat or humidity. The exclusive ARMO-DURâ case is immune to oil, grease, fumes, salt spray, sun, rust and corrosionand is outstanding in its ability to withstand mechanical shocks and vibration. Features • Built-in transistor amplifier (fed by dynamic microphone) • Frequency response from 300 to 5,000 Hz, tailored for voice communications use • Low sensitivity to hum pickup • High-impact ARMO-DURâ case is lighter and stronger than die-cast metal, comfortable to the touch in hot or cold weather • Rugged and dependable under all operating conditions–Long-life Neoprene-jacketed coil cord • Silver-plated switch contacts for long-term low contact resistance and reliable performance
©2003 Shure Incorporated 27B3023 (Rev. 4)
C2 C3 .001uF 120pF
C4 .001uF
W3 GND/ SHIELD
Q1
R3 6.2K
OUT/WHT W2
C5 120pF
MK1
W8
INTERNAL CONNECTIONS FIGURE 1
RADIO INPUTS The 596T is designed to operate with two-way radio sets with an audio input circuit similar to that shown in Figure 2.
560
1K
FROM MIC OUT/WHT
15PF
9.6 VDC
GND/SHIELD
STANDARD TEST CIRCUIT FIGURE 2
SPECIFICATIONS Test Conditions: (unless otherwise specified) Audio output between White and Shield (Ground) PTT switch depressed Measured with High Z DMM Standard test circuit as shown in Figure 2 Type Dynamic (with transistor preamplifier)
Printed in U.S.A.
RELATIVE RESPONSE IN dB
Frequency Response 300 to 5,000 Hz (see Figure 3)
Construction Case: Black textured high-impact ARMO-DURâ Weight 260 grams (9.2 oz) with cable
ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Á Á Á Á ÁÁÁÁÁÁÁ Á Á ÁÁÁÁÁÁÁ Á +10ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ Á Á Á ÁÁÁÁÁÁÁ Á Á ÁÁÁÁÁÁÁ Á ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ 0 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ Á Á Á ÁÁÁÁÁÁÁ Á Á ÁÁÁÁÁÁÁ Á ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Á ÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ –10Á Á Á Á Á ÁÁÁÁÁÁÁ Á Á ÁÁÁÁÁÁÁ Á ÁÁ ÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Á Á Á Á ÁÁÁÁÁÁÁ Á Á ÁÁÁÁÁÁÁ Á Á Á Á2 Á3 Á4 Á5Á6Á7Á8Á9 Á Á2 Á3 Á4 Á5Á6Á7Á8Á9 Á Á ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 50
100
1000
10000
ACCESSORY Mounting Bracket......................................................... RK6MB
REPLACEMENT PART Cartridge....................................................................... RP324
MOUNTING The 596T is provided with a rear-case hang-up button for use with a mounting bracket on or near associated equipment. The bracket has mounting holes with clearance for No. 6 or No. 8 mounting screws (not supplied).
Dimensions
20000
see Figure 4
FREQUENCY IN HERTZ
TYPICAL FREQUENCY RESPONSE FIGURE 3
42.7 mm (1–11/16 in.)
ÑÑ ÑÑ ÑÑ Ñ ÑÑ Ñ ÑÑ ÑÑ ÑÑ ÑÑ Ñ ÑÑ ÑÑÑ Ñ Ñ Ñ ÑÑ Ñ Ñ Ñ ÑÑ ÑÑ ÑÑ Ñ Ñ ÑÑ
Sensitivity (at 1 kHz, 10 mm) -11 dBV (282 mV) (0 dB = 1 V at 100 mbars) Maximum Output Level (at 1 kHz, 3% THD) -7.2 dBV (437 mV) Maximum Sound Pressure Level (1 kHz, 3% THD) 126 dB SPL Magnetic Hum Sensitivity 13.4 dB max equivalent SPL per 1 mOe electromagnetic field Current Drain 3.5 mAdc at 9.6 Vdc Polar Pattern Omnidirectional Environmental Conditions Operating Temperature: -40° to 74° C (-40° to 165° F) Storage Temperature: -54° to 85° C (-65° to 185° F) Relative Humidity: 0 to 95% (non-condensing) Switch Double-pole, single-throw, slide push-to-talk, silver-plated contacts Cable Non-detachable, 1.8 m (6 ft) extended, 5 conductor (one shielded), coiled, black Neoprene
38.5 mm (1–17/32 in.)
63.3 mm (2–1/2 in.) 55.4 mm (2–3/16 in.)
Ñ Ñ ÑÑÑÑÑ ÑÑÑÑ Ñ Ñ Ñ Ñ ÑÑ ÑÑ ÑÑ Ñ Ñ ÑÑ Ñ ÑÑ Ñ ÑÑÑÑÑ Ñ ÑÑÑ ÑÑ ÑÑ ÑÑ ÑÑÑÑ Ñ ÑÑ
86.1 mm (3–3/8 in.)
Ñ ÑÑ Ñ ÑÑ Ñ Ñ ÑÑ Ñ
OVERALL DIMENSIONS FIGURE 4
Certification
SERVICE
Conforms to European Union directives, eligible to bear CE marking; meets European Union EMC Immunity Requirements (EN 50 082-1, 1992).
For service information and replacement parts, please contact Shure's Service department at 1-800-516-2525. Outside the United States, please contact your Authorized Shure Service Center
SHURE Incorporated Web Address: http://www.shure.com 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A. In U.S.A., Phone: 1-847-600-2000 Fax: 1-847-600-1212 In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414 In Asia, Phone: 1-852-2893-4290 Fax: 1-852-2893-4055 International Fax: 1-847-600-6446
2