Transcript
产
品
规
格
书
Product Specification Sheet DTCSOO1XN-CNMxx RoHS Compliant 10Gb/s SFP+ Direct Attach Active Copper Cables ,1~5m Reach
PRODUCT FEATURES ● Support for multi-gigabit data rates up to 10.5Gbps ● Data rates backward compatible to 1Gbps ● Hot-pluggable SFP 20PIN footprint ● Available in lengths of 1, 1.5, 2, 2.5, 3, 5m ●Metal with lower EMI ●Compliant with SFF-8472 Rev 11.1 ●Compliant with SFP+ MSA: SFF-8431 Rev4.1 ● Low Power Consumption < 0.5W ● Power Supply :+3.3V ● Compatible to SFP+ MSA ● Temperature Range: 0~ 70 °C
APPLICATIONS ●High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers ●Switched fabric I/O such as ultra high bandwidth switches and routers ●Data center cabling infrastructure ●High density connections between networking equipment
STANDARD ●ESD to the Electrical PINs: compatible with MIL-STD-883E Method 3015.7 ●RF Immunity compatible with IEC 61000-4-3 ●EMI compatible with FCC Part 15 Class B EN55022 Class B ●RoHS compliant with 2002/95/EC 4.1&4.2 2005/747/EC
Product Description The SFP+ cable assemblies are high-performance, cost effective I/O solutions for 10Gb Ethernet and 10G Fibre Channel applications. SFP+ copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fibre Channel industry standard.
ABSOLUTE MAXIMUM RATINGS Parameter Supply Voltage Storage Temperature Relative Humidity
Symbol Vcc
Min. -0.5 -40
Max. 4.0 85 85
Unit V °C %
Note
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the module
GERERAL OPERATING CHARACTERISTICS Parameter Data Rate
Symbol
Min.
Ethernet Fiber Channel
Supply Voltage Supply Current
Vcc Vcc Icc Icc Tc
3.13
Max.
PIN DEFINITIONS AND FUNCTIONS
0
Unit Gb/s
3.47
5
3
Operating Case Temp.
Typ 10.3125 9.953 3.3
100 70
V V mA mA °C
Note
Note 1) The module ground pins shall be isolated from the module case. Note 2) This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board. Note 3) This pin shall be pulled up with 4.7K-10Kohms to VccT in the module. Note 4) This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board. In FC designated as RX_LOS, inSONET designated as LOS, and in Ethernet designated at Signal Detect.
PACKAGE DIMENSIONS
Ordering Information art Number
Cable Length (m)
AWG
DTCS1XC-CNM05
0.5
30
DTCS1XC-CNM1
1
30
DTCS1XC-CNM3
3
30
DTCS1XC-CNM5
5
24
FOR MORE INFORMATION Datolink Ltd Add: 6F, block 1, Jinfanghua industrial zone, AV. Banxuegang, Bantian, Longgang district, Shenzhen, China 518129 Tel: 86-755-25263582 25263585 Fax:86-755-28367056 Email:
[email protected]
Website:www.datocom.com
