Transcript
USB 2.0 4-Port Host Adapter User’s Manual
Table of Contents 1 Introduction … … … … … … … … … … .… … … … … … .. 1 2 Key Features and Benefits … … … … … … … ..… … … .. 1 3 System Requirements … … … … … … … … … … … … ... 2 4 Package Contents … … … … … … … … … … … … … … .. 2 5 Static Electricity Precaution … … … … … … … … … ..... 2 6 Hardware Installation … … … … … … … … … ..… … … .. 2 7 Driver Installation … … … … … … … … … … … … .… … 3 7.1 Windows 98 SE Driver Installation … … ...… … .… 7.2 Windows ME Driver Installation … … … … … … ... 7.3 Windows 2000 Driver Installation … … … … ..… … 7.4 Windows XP Driver Installation … … … … … … ....
3 4 5 5
1 Introduction The USB 2.0 4-Port Host Adapter adds four high -speed USB 2.0 ports to your system. It supports high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) data transfer modes. With USB 1.1 backward support, this host adapter works with all types of USB 2.0/1.1 devices including hubs, data storage devices, PC video cameras, digital cameras, CD-R/RW drives, DVD-ROM drives, scanners, printers, memory card readers/writers, and more.
2 Key Features and Benefits •
Compliant with USB specifications revision 2.0
•
Confirms to PCI Specification, Version 2.2
•
Supports simultaneous operation of multiple high-speed USB 2.0 and USB 1.1 devices.
•
Users friendly hot-swapping feature allows you to attach/detach USB devices without turning your system off
•
Supports 480 Mbps, 12 Mbps and 1.5 Mbps data transfer modes
•
Works with all kinds of USB2.0/ USB 1.1 devices including hubs, data storage devices, PC video cameras, digital cameras, CD-R/RW drives, DVD- ROM drives, scanners, printers, memory card readers/writers, and more.
Note: USB 1.1 devices are limited to USB 1.1 speeds even when they are connected to USB 2.0 host adapter or USB 2.0 hubs.
3 System Requirements Ÿ
Pentium or equivalent computer with an available PCI slot
Ÿ
Windows 98SE/ME/2000/XP
4 Package Contents Ÿ
USB 2.0 4-Port Host Adapter
Ÿ
Driver installation diskette
Ÿ
This user’s manual
5 Static Electricity Precaution One of the routine precautions you must be aware of when working with computer components is the problem of static electricity discharge. Note: Leave the product in its static-resistant bag until you are ready to install it. Caution: Static Electricity Discharge may permanently damage your system. To avoid possible static electricity discharge during the installation, please follow the guidelines below: Ÿ
Discharge any static electricity build up in your body by touching a large grounded metal surface or the computer case (if plugged in), for a few seconds.
Ÿ
During the installation, avoid any contact with internal parts. Handle cards only by their external edges.
6 Hardware Installation General instructions for installing the card are provided below. Refer to your computer’s reference manual for further information, if needed.
1. Turn OFF the power to your computer. 2. Unplug the power cord and remove your computer's cover. 3. Remove the slot bracket from an available PCI slot. 4. Carefully align the card to the selected PCI slot and push the board down firmly, but gently, until it is well seated. 5. Replace the slot bracket's holding screw to secure the card. 6. Replace the computer cover and reconnect the power cord.
7 Driver Installation 7.1 Windows 98 SE Driver Installation 1. After installing the board, boot up your system. 2. At the Add New Hardware Wizard, click Next. 3. Choose Search for the best driver for you device (Recommended). Insert Driver Installation Diskette into floppy drive, and click Next. 4. Select Floppy disk, click Next. 5. While The updated driver (Recommended) VIA Tech 3038 PCI to USB Universal Host Controller displays, click Next, Next and Finish. 6. While Add New Hardware Wizard displays VIA Tech 3038 PCI to USB Universal Host Controller, click Next. 7. Choose Search for the best driver for you device (Recommended) and click Next. 8. Select Floppy disk, click Next.
9. While The updated driver (Recommended) VIA Tech 3038 PCI to USB Universal Host Controller displays, click Next, Next and Finish 10. While Add New Hardware Wizard displays PCI Universal Serial Bus, click Next. 11. Choose Search for the best driver for you device (Recommended), and click Next. 12. Select Floppy disk, click Next, Next, Next and Finish.
7.2 Windows ME Driver Installation 1. After installing the board, boot up your system. 2. Once Windows has installed, double click MY Computer / Control Panel / System. Select Device Manager tab. 3. Double click !VIA Tech 3038 PCI to USB Universal Host Controller. 4. Select Driver tab and click Update Driver button. 5. Select Specify the location of the driver (Advanced), then click Next. 6. Check Removable Media [Floppy, CD-ROM… ], Insert Driver Installation Diskette into floppy drive and click Next. 7. When VIA USB 2.0 Enhanced Host Controller displays, click Next, and then click Finish. Remove Driver Installation Diskette, click Y to reboot your system. Your USB 2.0 PCI Host Adapter is ready now.
7.3 Windows 2000 Driver Installation 1. After installing the board, boot up your system. 2. When Found New Hardware Wizard displays, click Next. 3. While Universal Serial Bus (USB) Controller displays, choose Search for a suitable driver for my device (Recommended), then click Next. 4. Insert Driver Installation Diskette into floppy drive. 5. Choose Floppy disk drives, click Next, Next, and Finish. Your USB 2.0 PCI Host Adapter is ready now.
7.4 Windows XP Driver Installation 1. After installing the board, boot up your system. 2. While Universal Serial Bus (USB) Controller displays, choose install the software automatically (Recommended). Insert Driver Installation Diskette into floppy drive, then click Next. 3. While Hardware installation displays VIA USB 2.0 Enhanced Host Controller, press Continue Anyway and then Finish. 4. When USB 2.0 Root Hub Device displays, choose install the software automatically (Recommended), and then click Next. 5. While Hardware installation displays USB 2.0 Root Hub Device, click Continue Anyway and then Finish. Your USB 2.0 PCI Host Adapter is ready now.
Empty page
5303-0173-1
