Transcript
PS7112-1A PS7112L-1A
D
6 PIN DIP SOLID STATE RELAY
FEATURES
DESCRIPTION
• DESIGNED FOR AC/DC SWITCHING APPLICATIONS
PS7112-1A and PS7112L-1A are solid state relays containing a GaAs LED on the light emitting side (input side) and MOSFETs on the output side.
UE
• IDEAL FOR ANALOG SIGNAL CONTROL APPLICATIONS • LOW LED OPERATING CURRENT: IF = 2 mA • LOW OFFSET VOLTAGE
APPLICATIONS
• SMALL PACKAGE: 6 Pin DIP
• VOICE TELEPHONY • AUDIO EQUIPMENT
IN
• AUDIO INSTRUMENTATION
NT
ELECTRICAL CHARACTERISTICS (TA = 25 °C) PART NUMBER Forward Voltage, IF = 10 mA
V
IR
Reverse Current, VR = 5 V
µA
ILOFF
Off-State Leakage Current, VD = 100 V
µA
COUT
Output Capacitance, VD = 0 V, f = 1 MHz
IFon
Coupled
PS7112-1A, PS7112L-1A UNITS
VF
LED On-state Current, IL = 200 mA
MIN
TYP
MAX
1.2
1.4 5.0
0.03
1
57 mA
2.0
On-State Resistance, IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 200 mA, t ≤ 10 ms
Ω
3.0
6.0
tON
Turn-on Time IF = 10 mA, VO = 5 V, PW ≥ 10 ms
ms
0.1
0.4
tOFF
Turn-off Time IF = 10 mA, VO = 5 V, PW ≥ 10 ms
ms
0.03
0.2
RI-O
Isolation Resistance, VI-O = 1.0 kVDC
Ω
CI-O
Isolation Capacitance, V = 0 V, f = 1 MHz
pF
RON1 RON2
Note:
PARAMETERS
SC O
MOSFET Diode
SYMBOLS
109 1.1
1. Test Circuit for Switching Time: IF
PulseInput
DI
VL
Input monitor
Rin
Input
50% 0
VC = 5 V
PS7112-1A, PS7112L-1A 6
5
4
1
2
3
90%
VO monitor Output
RL
10% tON
tOFF
California Eastern Laboratories
PS7112-1A, PS7112L-1A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C)
ILP PD Coupled BV PT TOP TSTG
PARAMETERS
UNITS
RATINGS
mA V mW A
50 5 50 1
V
100
mA
200 250 400
PART NUMBER
Break Down Voltage Continuous Load Current3 Connection A Connection B Connection C Pulse Load Current4 (AC/DC Connection) Power Dissipation
mA mW
400 560
VR.M.S. mW °C °C
1500 610 -40 to +80 -40 to +100
PS7112-1A,PS7112L-1A
SYMBOLS PARAMETERS IF LED Operating Current VF LED Off Voltage
UNITS mA V
MIN TYP MAX 2 10 20 0 0.5
D
Forward Current (DC) Reverse Voltage Power Dissipation Peak Foward Current2
ORDERING INFORMATION
UE
SYMBOLS Diode IF VR PD IFP MOSFET VL IL
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
PART NUMBER
PACKAGE
PACKING STYLE
PS7112-1A
6-pin DIP
Magazine case 50 pcs
PS7112L-1A
PS7112L-1A-E3
Embossed Tape 1000 pcs/reel
Connection A
Connection B
Connection C
1 2 3 1 2 3 1 2 3 1 2 3
5
IL
4 6 5
IL
VL (AC/DC)
L L
4 6 5 4
IL
6 5
IL
L L IL + IL
4
NT
Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1 % 3. Conditions: IF ≥ 2 mA. The following tupes of load connections are available: 6
IN
PS7112L-1A-E4 Isolation Voltage5 Total Power Dissipation Operating Temperature Storage Temperature
IL
+ _ VL (DC)
_ + VL (DC) + _ VL (DC)
SC O
4. PW = 100 ms, 1 shot. 5. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output.
OUTLINE DIMENSIONS (Units in mm)
PS7112L-1A
PS7112-1A
9.25±0.5
9.25±0.5
PIN CONNECTIONS 6
5
6
1
0.5±0.1 1.34±0.1 0.25 M
6
5
4
3
3
1
2
3
1. LED Anode 2. LED Cathodee 3. NC 4. MOSFET Drain 5. MOSFET Source 6. MOSFET Drain
6.5±0.5 3.5±0.3 1.34±0.1
0 to 15° 2.54
2
2
PIN CONNECTIONS
4
7.62 6.5±0.5
3.3±0.3 4.15±0.3 3.5±0.3
DI
1
4
5
0.10+0.10 -0.05
2.54
0.9±0.25 9.60±0.4
PS7112-1A, PS7112L-1A TYPICAL PERFORMANCE CURVES (TA = 25 °C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE
MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300
60
40
20
0 -25
0
25
50
75 80
100
200
150
100
50
0 -25
25
50
80
75
IN
FORWARD VOLTAGE vs. AMBIENT TEMPERATURE
100
OUTPUT CAPACITANCE vs. SUPPLY VOLTAGE
250
Output Capacitance, COUT (pF)
1.6
NT
1.4 IF = 50 mA
30 mA 20 mA 10 mA
1.2
5 mA
1.0
SC O
1 mA
0.8 -25
0
25
50
75
150
100
50
0
100
0.5
0 -25
0
25
80
100
20
15
10
5
50
75
Ambient Temperature, TA (°C)
100
120
n = 50 pcs IF =10 mA IL = 10 mA
25
Number (pcs)
DI 1.0
60
30
Normalized to 1.0 at TA = 25 °C IF = 10 mA IL = 10 mA
1.5
40
ON-STATE RESISTANCE DISTRIBUTION
3.0
2.0
20
Supply Voltage, VCC (V)
NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE
2.5
f = 1 MHz
200
Ambient Temperature, TA (°C)
Normalized On-State Resistance, RON
0
Ambient Temperature, TA (°C)
Ambient Temperature, TA (°C)
Forward Voltage, VF (V)
250
D
80
UE
Maximum Load Current, IL (mA)
Maximum Forward Current, IF (mA)
100
0 2.8
2.9
3.0
On-State Resistance, RON (Ω)
PS7112-1A, PS7112L-1A TYPICAL PERFORMANCE CURVES (TA = 25 °C) OFF-STATE LEAKAGE CURRENT vs. SUPPLY VOLTAGE
LOAD CURRENT vs. LOAD VOLTAGE 300 IF = 10 mA 200
10-5 TA = 80 °C
-7
10
TA = 25 °C 10 -8
0
20
40
60
80
-1.0
-0.5
0
0.5
1.0
1.5
-100
-300
100
Load Voltage, VL (V)
IN
Supply Voltage, VCC (V)
TURN-OFF TIME vs. FORWARD CURRENT
TURN-ON TIME vs. FORWARD CURRENT
0.5
8.0
Turn-off Time, tOFF (ms)
VO = 5 V
NT
6.0
4.0
2.0
SC O
Turn-on Time, tON (ms)
-1.5
-200
10 -9
0
10
20
30
40
VO = 5 V
0.4
0.3
0.2
0.1
0
10
20
30
Forward Current, IF (mA)
Forward Current, IF (mA)
TURN-ON TIME DISTRIBUTION
TURN-OFF TIME DISTRIBUTION
30
30
n = 50 pcs IF = 10 mA VCC = 5 V RL = 500 Ω
20
DI
15
10
15
10
0
0
0.10
20
5
5
0.05
n = 50 pcs IF = 10 mA VCC = 5 V RL = 500 Ω
25
Number (pcs)
25
Number (pcs)
100
UE
10-6
D
10
-4
Load Current, IL (mA)
Off-State Leakage Current, ILOFF (A)
10-3
0.15
Turn-on Time, tON (ms)
0.02
0.06
Turn-off Time, tOFF (ms)
40
PS7112-1A, PS7112L-1A TYPICAL PERFORMANCE CURVES (TA = 25 °C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE
NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0
2.0
1.0
0.5
0
25
50
75
0
25
50
75
100
IN
NT
OUTLINE AND DIMENSIONS (REEL)
2.0 ± 0.5 φ13.0 ± 0.5
10.3 ± 0.1
16.0 ± 0.3
4.3 ± 0.2
SC O
7.5 ± 0.1
1.75 ± 0.1
OUTLINE AND DIMENSIONS (TAPE)
4.0 ± 0.1
0.5
Ambient Temperature, TA (°C)
TAPING SPECIFICATIONS (Units in mm)
1.55 ± 0.1
1.0
0.0 -25
100
Ambient Temperature, TA (°C)
2.0 ± 0.1
1.5
R 1.0
φ80.0 ± 5.0
0.0 -25
2.0
UE
1.5
2.5
φ330
2.5
Normalized to 1.0 at TA = 25 °C IF = 10 mA VCC = 5 V RL = 500 Ω
D
Normalized to 1.0 at TA = 25 °C IF = 10 mA VCC = 5 V RL = 500 Ω
Normalized Turn-off Time, tOFF
Normalized Turn-on Time, tON
3.0
φ21.0 ± 0.8
0.3
1.55 ± 0.1
10.4 ± 0.1
12.0 ± 0.1
DI
PS7112L-1A-E3
+2.0
16.4- 0.0
Packaging : 1000 pcs/reel
TAPING DIRECTION PS7112L-1A-E4
PS7112-1A, PS7112L-1A RECOMMENDED SOLDERING CONDITIONS 235 °C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
UE
(heating) to 10 s
235 ˚C (peak temperature) 210 ˚C
to 30 s
100 to 160 ˚C 60 to 120 s (preheating)
IN
Package Surface Temperature T (˚C)
Recommended Temperature Profile of Infrared Reflow
D
(1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux
(2) Dip soldering • Temperature • Time • Number of times • Flux
NT
Time (s)
260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
DI
SC O
(3) Cautions • Fluxes Avoid removing the residual flux with freon-based cleaning solvent.
EXCLUSIVE NORTH AMERICAN AGENT FOR
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 07/27/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE
