Transcript
6000W Generator Table of Contents
6000WATT GENERATOR
Topic
Page
Limited Safety
Warranty
3
Guidelines
5
General
Precautions
6
Battery
15
Assembly
16
Operation Spark
17
Plug
Inspection,
Service
22
Cleaning,
Maintenance
and
Storage
23
Installation
29
Compliance
31
Specifications General
32
Parts
Listing
33
WARNING! IN THIS
READ MANUAL
AND
UNDERSTAND
BEFORE
INSTRUCTIONS
IN THIS
ALL
OPERATING. MANUAL
SAFETY
FAILURE
COULD
PRECAUTIONS TO COMPLY
RESULT
WITH
IN PERSONAL
INJURY, PROPERTY DAMAGE, AND/OR VOIDING OF YOUR WARRANTY. ALL=POWER WILL NOT BE LIABLE FOR ANY DAMAGE BECAUSE OF FAILURE TO FOLLOW THESE INSTRUCTIONS.
www.al
Owner's Limited AIEPower
to the
application (personal, warranty are free from
90 days from compressors,
odginal
repair
who
uses
the
product
usage) that workmanship
in a consumer
THIS
all products covered under this for one year from the date of
covered by this limited warranty which are used in commercial are warranted to be free of defects in material and workmanship
the date of original a_r tools, service
wifl
purchaser
residential or household defects in material and
purchase. All products (i.e. income producing)
6000W Generator Limited Warranty {cont'd)
Warranty warrants
AtFPower
Manual
or replace,
purchase. Products covered parts, pressure washers and at AtFPower
failed
within
the
sole
components
which
have
to the normal replacement final.
work parts.
flow and business hours All decisions of AIFPower
option,
warranty
under this generators.
products
or
Service
will
period.
at the service with regard
center to this
warranty
applications for
include
air
WARRANTY
gives
you specific
legal
rights,
and you
may
also
as reconditioned,
• Merchandise
that
has
cold, heat, rain, accident, failure
To process
a warranty
be evaluated Warranty Retain
OF ORIGINAL claim
on this
by an Authorized
Service original
Use reasonable
Center cash care
PURCHASER product,
Warranty
call
(initial
of
other
rights
which
Center.
Repair
and transportation assoiciated
item
to the
retailer.
The
of the
product
nearest
must
Authorized
888.896.6881.
register
sales
in the operation
receipt and
as proof
maintenance
of purchase
for
of the product
humidity, freeze damage, the product in accordance
warranty
to work=
as described
costs
with
parts
inoperative
For the location
as rental
equipment,
or inoperative
or floor
because
or display
of ordinary
models.
wear,
misuse,
use of improper chemicals, negligence, with the instructions provided in the
improper maintenance, or unauthorized repair
the use of accessories or alterations.
or
of merchandise
assembly,
required
determine
not to be defective.
oil, adjustments
or other
with
which
installation
and start-up
ere expected
to become
vary from
User):
DO NOT return
Service
excessive to operate
used
damaged
according
• Expendable RESPONSIBILITY
become
Owner's Manual(s) supplied with the product, attachments not recommended by All-Power, be schelduled
location, and the avaifibflity limited warranty shall be
have
NOT COVER:
sold
o Costs costs.
This warranty state to state.
DOES
= Merchandise
in the
Owner's
or accessories
or unusable
Merchandise sold product of another any, will
after
supplied
a reasonable
the
period
product
of use.
by All-Power which has been manufactured company, such as gasoline engines. The
by and identified as the product manufacturer's warranty,
apply.
ANY
INCIDENTAL,
MAY
RESULT
NOT COVERED apply to you.
INDIRECT
FROM
ANY
BY THIS
OR
CONSEQUENTIAL
DEFECTS,
FAILURE
WARRANTY.
Some
INCLUDING
THOSE
LOSS,
DAMAGE,
OR MALFUNCTION states
do not
allow
OR
EXPENSE
OF THE the
exclusion,
PRODUCT
THAT iS
so it may
not
Manual(s). IMPLIED Deriver or ship the product be paid by the purchaser. If the Center,
purchaser the
does
purchser
to the Authorized
not receive should
contact
satisfactory
Warranty
results
Service
form
Center.
the Authorized
AIFPower.
Downloaded from www.Manualslib.com manuals search engine
Freight
costs,
Warranty
if any must
Sercive
WARRANTIES,
A PARTICULAR PURPOSE, PURCHASE, Some states above
limitations
may
OF MERCHANTABILITY
OR FITNESS
FOR
ARE LIMITED TO ONE YEAR FROM THE DATE OF ORIGINAL do not allow limitations on how long an implied warranty lasts,
not apply
to you,
so the
if
Owner's Safety
Guidelines
= Definitions
This
contains
information
manual
important
that
General
you
need
to know
in order to protect YOUR SAFETY and to PREVENT PROBLEMS. The fofiowing symbols help you recognize
information.
Please
the manual
and
pay
attention
to these
Generator Precautions
and
understand EQUIPMENT
read
6000W
Manual
WARNING! FAILURE TO FOLLOW SEVERE INJURY OR DEATH,
this
THESE
INSTRUCTIONS
CAN
RESULT
_ Read and understand all of these safety instructions. Be sure for future use.Safety Saveto retain Thesethemimportant instructions!
RESULT AUTION: IN FAILURE DAMAGE ON.
TO TO FOLLOW THE TOOLTHESE AND/OR INSTRUCTIONS THE ITEM
YOU CANARE ALSO WORKING
@ CARBON MONOXIDE _DANGER Using Generator
POSSIBILITY OF PERSONAL INJURY OR DEATH ARNING! WARNINGS INDICATE A CERTAINTY INSTRUCTIONS ARE NOT FOLLOWED.
_
IF STRONG OR
exhaust
a generator
contains
high
indoors
levels
WILL
KILL
of carbon
@
YOU
monoxide
see or smell If you can smell the generator exhaust, you cannot smell the exhaust, you could be breathing CO.
IN MINUTES. (CO),
CAUTION: EQUIPMENT FOLLOWED.
_
NOTE:
CAUTIONS DAMAGE
GIVE
HELPFUL
PRODUCT
COULD
GAS THAT WARNING! DEATH,
INFORMATION
RESULT
IN SERIOUS
THiS EQUIPMENT. WHEN PRECAUTIONS SHOULD THE
RiSK
OF
USING ALWAYS
PERSONAL
must be cleaned or federal codes
Never
or other
store
fuel
General
grounded
connections
conductive to avoid
AiR TOOLS, BASIC SAFETY BE FOLLOWED TO REDUCE
flames
objects,
and
Manual
Excessive
buildup
of unburned
such
Gasoline
fuel and
handling
procedures,
Keep
generator
Keep
sources
as tools, These
of ignition
away
events
from
around
exposed,
could
ignite
the
engine
and
five electrical
fumes
fuel
parts
the
General Work
the generator.
explosive condition. hot engine shutdown. gases
to dissipate
Use only
engine
engine is running or while leaks in the fuel system
fuel
gases
in the
exhaust
attempting
manufacturer
to restart
the
recommended
fuel
the
engine
system
This buildup can occur after repeated If this occurs, open exhaust system before
can
and
unleaded
is still
hot.
gasoline
with a minium
a potentially
attempts, valve testing, if equipped, and allow
or the
generator. and
L). Use regular octane
HOT
rating
of 90.
is 1.16
qt(1.1
L)
_
"L"
_00._ _.,_0,,,,_ 0.......
FOR
SOME
TIME
AFTER
THE
ENGINE
IS RUN.
WEAR
to power sensitive electronic equipment (including the addition of an approved line conditioner, which
engine
or where
without
area. Keep
gasofine
oil
will ruin
cigarettes,
is stored.
FLAMMABLE AND iS EXPLOSIVE OUT OF REACH OF CHILDREN,
area
potentially
explosive.
ABD
fire
class
clean
Use proper
extinguishers
fuel
storage
and
nearby,
at all times.
Generator
your
work
area
clean
liquids,
gases,
or dust.
Keep bystanders, shields as needed.
(cont'd)
and
tools
well
lit, Cluttered
in explosive
Generators
children,
benches
atmospheres,
create
and visitors
sparks
away
which
while
and
such
dark
areas
as in the
may
ignite
operating
invite
presence
the dust
a generator.
accidents. of flammable
or fumes. Provide
barriers
or
Safety
Grounded
tools
grounded
in accordance
grounding
must
be plugged
prong
with
or modify
into
an outlet
all codes
the
plug
and
in any
properly
installed
ordinances. way.
Never
Do not use
@
and remove
the
any adapter
plugs. provides a low-resistance path to carry event of an electrical malfunction.
insulated
FOR ANY APPROVED
DIRECT LINE
CAUSED
Downloaded from www.Manualslib.com manuals search engine
BY FAILURE
tools
are
equipped
with
electricity
a polarized
other. This plug fits in a polarized outlet only reverse the plug. If it still does not fit, contact Do not change the plug in any way. grounded power cord and grounded
Double power
Avoid
surfaces
body
contact
is an increased
Do not expose risk of electric
When These THE USE OF AN APPROVED LINE CONDITIONER MAY CAUSE ATTEMPTING TO POWER SENSITIVEIS NOT ELECTRONIC TO THE EQU IPMENT. ALL-POWER RESPONSIBLEEQUIPMENT DAMAGE
and
multiple
away
from
the
abuse
with
grounded
risk of electdc
generator shock.
the power damaged
to rain
cord. power
shock
cords
power
where
insulation eliminates supply system. such if your
or wet conditions.
Keep
plug
one
blade
is wider
than
one way. If the plug does not fit fully in the a qualified electrician to install a polarized
cords
immediately.
as pipes, body
radiators,
need
for the three-wire
ranges,
and
refrigerators.
will
increase
is grounded.
Water
away
the
the outlet, outlet.
entering
from
Damaged
heat,
a generator
oil, sharp
power
cords
edges, increase
TO
USE AN
operating extension
the
or moving the risk of
computers is sold separately.
WITHOUT CAUTION: DAMAGE
OR INDIRECT CONDITIONER.
have
Precautions
parts. Replace electdc shock. designed without
the
in welt ventilated
area
and surrounding
power
Do not
Output
This generator is not and medical devices)
Work work
are flammable
Always
operate
Double
Oil capacity
INSULATED GLOVES AND OR WAiT UNTIL SYSTEM THE ENGINE EXHAUST WARNING! ENGINE EXHAUST PARTS AND BECOME VERY SYSTEM HAVE COOLED BEFORE HANDLING THESE PARTS.
Power
the
fumes
Do not
There REMAIN
from
to start
off.
......
AND
air
Area
Grounding user in the
Hot Components HOT
to fresh
AND MAY MONOXIDE LEAD TO CARBON
Do not
Oil: is 6.6 US gallons(25
move
or vapors.
create
failed start drain plugs,
Fuel: Fue_ capacity
Attempting
the warranty.
away
6000W
Dispose of fluids and cleaning materials as per Store oily rags in a covered metal container.
near
or other
or arcing.
refill the fuel tank while the the generator with known
and fuel.
ARNING! GASOLINE IS EXTREMELY UNDER CERTAIN CONDITIONS, KEEP
Electrical • Do not operate
These
use a battery-
(_
oil
void
or sparks
_i
{cont'd)
sparking
engine
flames
and Oil (cont'd)
Do not smoke, or allow sparks, tank. Fuel vapors are explosive. Keep
materials
Precautions
Gasoline
requires
product
CAUSE OF CONSCIOUSNESS EXHAUSTLOSS CONTAINS POISONOUS
vents.
INJURY.
up immediately. and regulations.
flammable
and Oil
This the
INJURY
Owner's Fuel or oil spills any local, state,
Gasoline
CAN THE
If you
or other partly enclosed areas. Using a fan or opening windows
- ONLY use a generator outdoors and far away from open windows, doors, and openings can pull in generator exhaust. Even when you use a generator correctly, CO may leak into the home. ALWAYS
OF NOT
AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL ARNING! IMPROPER OPERATION OR MAINTENANCE WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING
_
gas you cannot
CO. But even
powered or battery-backup CO alarm in the home. If you start to feel sick, dizzy, or weak after the generator has been running, RIGHT AWAY. See a docto_ You could have carbon monoxide poisoning,
NOTES
OF THIS
INDICATE A POSSIBILITY IF INSTRUCTIONS ARE
a poisonous
are breathing
- NEVER use a generator inside homes, garages, crawlspaces, Deadly levels of carbon monoxide can build up in these areas. and doors does NOT supply enough fresh air.
A
IN
sections.
a power tool outside, use an outdoor extension cord marked "W-A" or "W". cords are rated for outdoor use, and reduce the risk of electdc shock.
Owner's General
Precautions
Electrical
Safety
• All connections and licensed e{ectricians, codes
Manual
6000W
(cont'd)
General
(cont'd)
and
other
regulations
where
and
Safety
for fixed operation.
Avoid accidental starting, the spark plug wire when
installations
in accordance
with
all relevant
adjusting
left attached Do not
Do not
to connect
electrically with
energized
any part
the generator characteristics
Before
load
servicing
of the
parts body,
connections
while
of the generator
or with
standing
and
in water,
interconnecting
any nominsulated
conductive
only to a load or electrical system (120 volt) that and rated capacities of the generator.
equipment
powered
Keep
terminals
Insulate
Guard
clean
and
all connections
by the
generator,
and dry. Replace
Replace terminals
against
radiators,
electric
ranges,
Personal
and
disconnected
shock.
Prevent
disconnect
cables
refrigerator
of inattention
while
operating
generators
moving
equipment
and
or wrenches
overreach.
Keep
part
before
turning
of the generator
proper
footing
and
with
grounded
disconnect
in serious
surfaces
balance
on. A wrench
in personal
or a key that
is
iniury.
Always non-skid
wear eye protection. safety shoes, hard
at all times. Wear ANSI approved safety impact eye hat, or hearing protection must be used for
Do not
generator
from
its power
such
use the
generator
be controlled
with the
if the power
power
Generator
Use and Care
Make
power
sure
the
switch
switch
switch
is in its
does
not turn
is dangerous
"OFF"
and
position
and
it on or off. Any
must
disconnect
other
generator
that
cannot
be replaced.
the
spark
making any adjustment, changing accessories, or storing the generator. measures reduce the risk of starting the generator accidentally.
and
correct
untrained
plug
Such
persons.
wire
before
preventive
Generators
safety
are
as pipes,
operating a generator. Do or medication. A moment
personal
result
conditions.
Maintain generators use" until repaired.
result
the generator
may
The
the
any wiring where the insulation is cracked, that are worn, discolored, or corroded.
injury.
or jewelry. Contain long hair. Keep your hair, clothing, clothes, iewelry, or long hair can be caught in
with care.
Check for may affect
misalignment the generator's
accidents
are
caused
Do not
use damaged
generator.
Tag
damaged
generators
or binding of moving parts, breakage of parts, and any other operation. If damaged, have the generator serviced before
by poorly
maintained
"Do
not
condition that using. Many
generators.
Use only accessories that are recommended by the manufacturer may be suitable for one generator may become hazardous when
for your model used on another
Accessories generator.
that
parts.
Owner's General Precautions
Manual
6000W General
(cont'd)
Generator Precautions
Installation
Servicing Maintain
keys
Store idle generators out of reach of children dangerous in the hands of untrained users.
contact
may
position,
with
is compatible
the
and use common sense when the influence of drugs, alcohol,
Dress properly. Do not wear loose clothing and gloves away from moving parts. Loose
"OFF"
Do not force the generator. Use the correct generator for your application. will do the job better and safer at the rate for which it is designed.
enclosures.
what you are doing, while tired or under
is in its
appropriate
Safety
Stay alert. Watch not use generator
switch
or
wires.
body
power
obiect.
tight. and
the
or on wet or
input. Keep all electrical equipment clean cut abraded or otherwise degraded.
Make sure not in use.
to a rotating
Use safety equipment. goggles. Dust mask,
touch
conductors Connect electrical
or disconnect
(cont'd)
(cont'd)
applicable. Remove
The generator must be earth-grounded electrical codes and standards before
Do not attempt soggy ground.
Precautions
Personal
conduits from the generator to the load must on ly be installed by trained and in compliance with all relevant local, state, and federa{ electrica{
and standards,
Generator
labels
If unreadable
and
name
or missing,
plates
on the
contact
our
generator
service
and
center
engine.
toll
free
These
carry
important
at 888-896-6881
information.
immediately
for a
(cont'd)
(cont'd)
If the generator is installed should not be run outdoors
outdoors, it must without protection
be weatherproofed to the generator
and should be soundproofed. and wiring conduit.
It
replacement. The Generator
service
performed
by unqualified
When
servicing
instructions may
be performed
only
personnel
a generator,
in this manual.
create
Heart
must
use
could only
qualified result
identical
Use of unauthorized
a risk of electric
shock
repair
personnel.
Service
or maintenance
in a risk of injury. replacement parts
parts.
or failure
Follow
to foflow
all appropriate maintenance
instructions
generator
Before
Keep
Pacemakers
TO
OR
FAILURE
OF THE
under
Any
separate
with
all relevant
including
the
earth-ground
rated
ensure
the lift
to lift such
a load.
away
from
full length
or more the
people
engine
rigging
the suspended
floor/ground surface If the floor/grounded
the
and IocaE and national electrician and building
electrical contractor.
codes.
Have
connection,
should
be completed
facility
be built
or installed
by a licensed
in stallation,
the wheels. The contents (tools, Install
work,
Two
and
supporting
generator
should be level surface is not
of the generator
frame
should
or alternator
assist
when
moving
lifting
lugs.
Connect
structure
during
low
lifting
are in good
relocating.
and strong enough level, strong cross at its
or lifting
to safely members
hold the weight should be
side.
PACEMAKER. For trailer
All electrical electrician.
1001bs (approx).
generator,
are
all personnel
placed
installation Ensure instaEtation meets all applicabte safety, installation performed by a qualified, licensed
the
and
The supporting of the generator.
PHYSiCIAN(S) BEFORE USING THIS PRODUCT. ELECTROMAGNETIC WARNI PEOPLE PROXIMITY WITH PACEMAKERS CONSULTCOULD THEIRCAUSE FIELDS NG! IN CLOSE TO A HEART SHOULD PACEMAKER INTERFERENCE
rifting
condition,
or injury.
weighs
this product. Never lift the generator using equipment to the frame of the generator
sound-and
moisture
within
the
trailer etc.)
generator
must
should
be capable
weather-proofing the
generator's
be mounted
of supporting
only
when
on the the
it is not
center
weight
raining
point
of the
or snowing
of the
generator
to avoid
trailer, and
over
all
trapping
area.
Mechanical fuel
storage
local,
state,
or generator and
federal
supply
must
regulations.
in full compliance
Always make sure the power allow the engine to completely Check
for
be carefully Check for other
damaged
parts.
checked alignment
to determine and binding
condition
The generator still be taken around
Downloaded from www.Manualslib.com manuals search engine
the
switch cool
that
may
Before
affect
is in its "OFF" before carrying using
the generator,
any
that it will operate properly of moving parts, any broken proper
is designed with guards to protect personnel and generator.
position. Disconnect out maintenance.
operation
part
that
the
appears
spark
plug
damaged
wire,
and
should
and perform its intended function. parts or mounting fixtures, and any
technician.
for protection from moving parts. equipment from other mechanical
In any case, care must hazards when working
Owner's General Precautions Mechanical • DO not
the
to reach hands,
arms,
when
engine
parts
access
• When
doors
working
approved
• Always
loose fast
on enclosures
gloves,
or adjust
follow
hair,
moving
on or around
safety
• Do not alter manufacturer.
safety
long are
and
w{th
the
the
safety
complete
guards
guard clothing, they
removed,
While
for maintenance and
cannot
closed
and
generator eye
any part
safety
jewelry
away clearly.
locked
goggles,
and
when
wear
scheduled
engine
and
oil, exhaust
fumes,
and
from
generator
is running,
do not
reason,
moving
parts.
Be
aware
cord
correct
and
gauge
(not
included)
length
is used,
according
make
_s not
clothing
ANSI
hat.
is assembled
and
supp{ied
to use only
UL approved
cords
having
Arnps
(@ ful_ Joad)
Cord
by the
maintenance.
50fL=100fto
Lengths
100fto=150ffo
0 - 5
16 AWG
16 AWG
12 AWG
5.1 - 8
16AWG
14AWG
10AWG
8.1 - 12
14AWG
12AWG
12.1 - 15
12AWG
10AWG
15 - 20
10AWG
10AWG
150fto=200fto 12 AWG
Chemicals • Avoid
contact
• Avoid
body
with
hot fuel,
contact
medical treatment immediately wash and seek medical
with
fuels,
oils,
and
immediately. Do not with soap and water. attention.
lubricants
hot solid used
induce vomiting For eye contact,
surfaces.
in the
generator,
if fuel is swallowed. immediately flush
If swallowed, For eyes
seek
skin contact, with clean water
Noise • Prolonged approved
exposure
to noise
ear protection
when
_evels
above
operating
68 DBA or working
is hazardous around
to hearing.
the generator
Owner's product
wear
ANSI
it is running.
Manual
6000WGenerator Assembly
Battery This
Always when
does
not
need
a battery. Unpacking 1. Remove 2. Compare
the generator the accessory
and loose parts box from the carton, with the inventory list below,
Loose Parts (Wheel kit and handle) Check all loose parts against the following list. if any of the loose parts shown are not included Hardware Your
Contact your dealer with your generator
toll free
Check:
Hardware
Kit should
include:
1) 2)
Two One
Handles with bolts, nuts, axle shaft with bolts and
3)
Two
washers
4)
Two
cotter
5) 6)
One Two
generator wheels
pin with nuts
chain
and brackets
pins leg with bolts
and nuts
--1 L_
ii LJ
@@
@@
l JIJl
Downloaded from www.Manualslib.com manuals search engine
the
table
that
required.
including
sure
to the following
Oft.= 50fto
access
generator
{cont'd)
Cord
If an extension
NarnepJate
protective
safety that
the
or any other
be seen
always
of the generator
Generator
GeneraJ Precautions
(cont'd)
Extension
generator
around
• Keep
• Keep
6000W
(cont'd)
operate
attempt
Manual
LJ
3
at 888.896.6881
Owner's Operation
6000W
Manual
Generator
Operation
..........
(cont'd)
Starting 1, Turn the engine switch to the "RUN" position. The engine switch enables and disables the system. STOP: To stop RUN:
i
CONTROLS OTE: THE
_
CAUTION:
TO
FIRST
ARE
USING
THE
HELPFUL
FOR
GENERATOR,
LOCATING THE
ENGINE
2. The
THE MUST
BE
TO DO SO, UNSCREW AND REMOVE THE ENGINE'S OiL DIPSTICK LOCATED AT THE WITH BOTTOMOiL OFTHE ENGINE CRANKCASE. THE ENGINE'S FILLED OF A HIGH QUALITY SAE lOW-30FiLL GRADE ENGINE OiL. CRANKCASE UNTIL THE OIL LEVEL IS LEVEL WITH THE UPPER MARKED LINE ON THE THE OiL FiLL
Before 1. Check
Starting that
"OFF"
the
DIPSTICK. HOLE.
SCREW
THE
power
switch
DIPSTICK
Fuel tank
BACK
the
tank cap gasoline.
first
use,
remove
the
gauge
for the amount
fuel
valve
is located
under
the
fuel tank
. When
the valve lever is in the ON position, fuel is allowed to flow from the fuel tank to the carburetor. Be sur to return
the
fuel
stopping
the
engine.
valve
lever
to the
OFF position
after
capacdy:25L(6.6gallons)
is in its 3. To start a cold engine, move the choke lever to the "Start" position. To restart a warm engine, leave the choke lever in the "RUN" position.
fuel
and fill the fuel tank with unEeaded When fueling, be sure that the
fuel strainer is in place. Replace tank cap. Thereafter, check the
engine
iNTO
position.
2. Before
fuel
THEN
the Generator
engine
the
ignition
engine
",o, Plu_
MENTIONED PARTS LISTED BELOW. ABOVE PRIOR
To run
the
The choke lever the carburetor.
the fuel engine's
opens
and
closes
the
choke
valve
mixture
from
in
of unEeaded
gasoline in the fuel tank. If necessary, refill the fuel tank with unleaded gasoline; the generator must be turned off and
_L
T_NK
CAP
The
"Start"
starting
position
a cold
The "RUN" for operation
enriches
the
fuel
engine.
position after
provides the correct fuel starting, and for restarting
mixture a warm
engine. Use gasoline with a pump octane rating of 90 or higher. We recommend unEeaded gasoling because it produces cooled downand before the fueland tank.extends fewer engine spark refilling plug deposits exhaust system Eife. Never use stale or contaminated gasoline or oil/gasoline mixture. Avoid getting dirt or water in the fuel tank.
.....
Owner's Operation
Manual
6000W Generator Operation
(cont'd)
Powering
Starting 4. Operate
the
Recoil
1. Prior to powering
Starter:
Puff the starter grip lightly until you feel then pull briskly. Return the starter grip Pulling the starter crank the engine
grip
(cont'd) 120 Volt AC Tools
operates
capacity power.
resistance, gently.
the recoil
starter
of the
to
tools
(120 V AC @ 41.7 If powering exceeds tools
and/or
has
been
moved
move up.
switch
the fuel
valve
to the
When the engine the OFF position reduce
the
lever
"Stop"
position,
to the
OFF
position.
is not in use, leave the fuel valve in to prevent carburetor flooding and to
possibility
of fuel
connection TO
to a separate
POWER
rated
voltage,
and amperage
generator.
SENSITIVE
LINE
ELECTRONIC
EQUIPMENT
CONDITIONER.
is running, simply connect the power into the 120 volt AC dual outlets.
TOPROTECTTRE AC CIRCUITIN CASEOFAN NOTE:THEGENERATORFEATURESAN AC AN OVERLOADOCCUR,THEBREAKERWILL
4.After
the
location
2. Turn
generator equipment
3.Disconnect all electrical duel outlets.
Engine
the engine
generatoCs
cords
of 120 volt
AC powered
it to the
_
1. Turn
the
to the "Start"
position to start the engine, gradually "Run" position as the engine warms
Stopping
for
ATTEMPTING
APPROVED 2. Once the tools and choke
sure
DAMAGE TO THE EQUIPMENT. ALL-POWER IS NOT RESPONSIBLE FOR tTHOUT THE USE OF AN APPROVED LINE CONDITIONER MAY CAUSE ANY DIRECT OR INDIRECT DAMAGE CAUSED BY FAILURE TO USE AN
_
5. If the
make
AMPs) is adequate to supply all electrical loads that the unit will the generatods capacity, it may be necessary to group one or more
equipment
CAUTION:
And Equipment:
and equipment,
leakage.
Downloaded from www.Manualslib.com manuals search engine
engine
and
powered
generator
(if not already
installed).
tools
have
and
equipment
completely
cooled,
OVERLOAD.SHOULD NON-FUSETRERMAL POP.
from
store
the
generator's
generator
PROTECTOR
120
volt AC
in a safe,clean,dry
Owner's Operation Powering 1. Prior
(cont'd) and
for the
connection
power
cord
Plug Service
equipment,
make
sure
the generator's
rated
voltage,
and
amperage
to a separate of a 12 VDC
powered
tool
In order to service the spark Recommended spark plugs: plug. To ensure deposits.
generator. or equipment
to the
AUTION: MAKE SURE POWER CORD TO THE
TO CONNECT THE POSITIVE POSiTiVE (+) TERMINAL ON
AND CONNECT THE NEGATIVE (-) LEAD OF THE NEGATIVE (-) TERMINAL ON THE GENERATOR. THE
12V DC iS FOR
BATTERY
CHARGING
(+) LEAD OF THE THE GENERATOR,
POWER
proper
plug, you will need a spark plug NHSP LD F7TC or NGKBPRGES
engine
operation,
the spark
plug
CORD
TO
the spark
plug
available). our OEM spark
gapped
and
free
of
cap.
THE
ONLY.
inspect
the spark
plug.
Discard
it if the
insulator
plug with a wire brush if it is to be reused. 5. Measure the plug gap with a feeler gauge.(Correct The gap should be : 0.70-0.80 mm (0.028-0.031 in)
in by hand wrench
the spark
plug
is seated,
NOTE: THE TIGHTENED
tighten
with a spark
SPARK PLUG MUST SPARK PLUG CAN
Manual
and
6000W
plug
BE SECURELY BECOME VERY
PLUGS SPARK
or chipped.
by carefully
8. After
ENGINE. NEVER USE SPARK USE ONLY RECOMMENDED
Owner's
is cracked
as necessary
6. Check that the spark plug washer is in good condition. 7. After the spark plug is seated, tighten with a spark plug
_
CJeaning,
be properly
2. Clean any dirt from around the spark plug base. 3. Use a spark plug wrench to remove the spark plug.
4. Visually
inspection,
wrench (commercially but we recommend
must
DC Terminals. 1. Remove
_
Generator
and Equipment:
(12VDC) is adequate to supply all electrical loads that the unit will power. If powering the generator's capacity, it may be necessary to group one or more of the tools and/or
equipment 2. Connect
tools
6000W Spark
12 Volt DC tools
to powering
capacity exceeds
Manual
Clean
bending
to prevent
to compress
the
spark
the side electrode.)
cross-threading. the
washer.
TIGHTENED. AN IMPROPERLY HOT AND COULD DAMAGE THE
WHICH HAVE AN IMPROPER PLUS OR EQUIVALENT.
HEAT
RANGE.
Generator
Fuel Sediment
Cup
Cleaning
Maintenance _
WARNING!
ALWAYS
MAKE
SURE
THE
ENGINE
POWER
SWITCH
(2) IS IN ITS
AND ALLOW SUFFICIENT TIME FOR THE ENGINE AND GENERATOR "OFF" POSITION. DISCONNECT THE SPARK PLUG WIRE FROM THE COMPLETELY COOL BEFORE PERFORMING ANY INSPECTIONS, MAINTENANCE,
OR
CLEANING.
TO ENGINE.
The sediment If the engine 1. Turn
cup prevents dirt or water which may be in the fuel tank from entering has not been run for a long time, the sediment cup should be cleaned.
the fuel valve
to the OFF position.
Remove
the sedement
2. Clean the sediment cup, and O-ring, in nonflammable 3. Reinstall O-ring, and sediment cup. 4. Turn the fuel valve ON and check for leaks.
or high
cup,
and
flash
point
I
Downloaded from www.Manualslib.com manuals search engine
O_R_
O-ring. solvent.
the
carburetor.
Owner's Maintenance Periodic maintenance condition. WARNING! performing
6000W
Manual
Guide and
Air cleaner
adjustment
is necessary
to keep the
Exhaust gas contains poisonous carbon monoxide. any maintenance. If the engine must be run, make
generator
in good
each
use,
inspect
the
-
Loose
-
Misaligned
-
Cracked
-
Damaged
electrical
wiring
-
Any
condition
that
generator.
Check
operating
can cause WARNING! solvent.
or broken
moving
1. Unsnap cleaner may
affect
occurs, have equipment.
remove
safe
50 hours
and replace SAE 10W-30
element
run
the
generator
without
the
air
cleaner.
Rapid
engine
wear
by a qualified
service
technician
before
further
of use,
drain
a soft
brush,
rag,
If necessary, tan k.
fill the
the warm
generator
and
in a solution then
of household
rinse thoroughly,
detergent
or wash
in the
point
solvent.
Allow
engine
oil and
squeeze
CLIP
the element
in clean
out the excess oil The engine will smoke during initial start-up if too much oil is left in the element. engine
oil
quality Level 4, Reinstall
hours of use, have perform thorough
water,
nonflammable or high flash element to dry thorughly.
3, Soak
Upper Every 300 technician
element
or vacuum.
a premium
the old
with a high a high grade engine oil.
the air
use. 2, Wash
with
the air cleaner cover clips, remove cover, and remove the e_ement.
operation.
it checked
all debris
Lubricate all moving parts using quality, lightweight machine oiL Every
soapy water or nonflammable solvent to clean the filter
parts
and
use,
service dusty
for:
Before each use, make sure the engine's oil and gas levels are adequate. crankcase until the oil level is even with the oil hill hole and/or fill the fuel
each
malfuncion, in extremely
parts
If an engine problem Do not use damaged
Before
To prevent carburetor operating the generator
a fire or explosion. Use only Using gasoline or flammable
NOTE: Never will result,
or binding
to the carburetor. frequently when
Shut off the engine before sure the areas is well ventilated.
screws
other
service
A dirty air cleaner will restrict air flow the air cleaner regularly. Service more areas.
A Before
Generator
a qualified, maintenance
the air cleaner
element
and the
cover,
certified on the
engine.
At_
CLEANER
ELEMEP4T
For long term storage, either drain fuel into suitable container or add a fuel preservative/ stabilizer (not breakdown.
included)
to prevent
fuel
ELEf_T
Owner's
Manual
Transporting/Storage When transporting generator level
care
objects Before
not
to drop
on the
the engine switch and Fuel vapor or spilled
or strike
storing
the
the
2. Service
according
unit
storage
for
generator
an extended
area to the
STORAGE TiME than
the
engine engine
when
the fuel
costa before or exhaust
fuel valve OFF. may ingite.
transporting system can
transporting.
Do not
Keep
or cause
place
heavy
1 month
is free table
period:
of excessive
humidity
and
dust,
below:
RECOMMENDED SERVICEPROCEDURE TO PREVENTHARDSTARTING No preparation
required
1 to 2 months
Fill with
add
gasoline
conditioner*,
2 months
Fill with fresh gasoline and add Drain the carburetor float bowl,
gasoline
conditioner*,
gasoline
conditioner*,
to 1 year
Drain 1 year
the
generator.
1, Be sure
Less
Generator
Transporting/Storage
the generator, turn to prevent fuel spillage.
serious burns or fires, Let the WARNING! Contact with a hot storing the generator.
Take
6000W
or more
the
Fill with Drain
the
fresh
fuel fresh
gasoline
and
sediment
cup.
gasoline
carburetor
and float
Drain the fuel sediment Remove the spark plug.
add bowl,
cup. Put a tablespoon
the cylinder. Turn the engine slowly distribute the oil, Reinstall the spark Change the engine After removal from into
a suitable
oil, storage,
container,
and
drain
the
fill
with
starting.
Downloaded from www.Manualslib.com manuals search engine
of engine
with the plug, stored fresh
pull
oil
rope
into to
gasoline gasoline
before
2, Char_ge the er_g4r_e oii 3, Remove the spark I_##, a_ pour about a labl÷spoor_ of dear_ engi_ o_i it_to l_!_e_l_er, Cra_k the engine _etaJ r_¢o_t_o ns to d_tribute the _ the_ reinsta_i the s_oaA p}_# 4, Stowly pu]] the starter grip uotJl tsa_sta_,_ i8 fe_t, At this pc|hi, the pisl[o_ is comity@ #p on ils compress;ion _roke ar'_d both the intak_ at_d exhau_ V_vs_ s_e c|o_ed, _'i_'_ the elegize in _!_ _sltii_n wIIihuh310 protect _t f_'o_ t_temsi c,.3rro_or_,
Owner's
6000W
Manual
Installation _
Generator
Installation
OTE: PRIOR GENERATOR'S
TO POWERING TOOLS AND EQUIPMENT MAKE RATED VOLTAGE, WATTAGE AND AMPERAGE
SURE THE CAPACITY
Supporting IS
Mount
ADEQUATE TO SUPPLY ALL ELECTRICAL LOADS THAT THE UNIT WILL POWER. IF POWERING EXCEEDS THE GENERATOR'S CAPACITY, IT MAY BE NECESSARY TO GROUP ONE OR MORE OF THE TOOLS AND/OR EQUIPMENT FOR CONNECTION TO A SEPARATE GENERATOR.
slab
the
(cont'd) and Mounting
generator
must
extend
on a concrete on all sides
slab capable
beyond
the frame
for slab specifications if necessary, Attach expansion anchor bolts (not supplied).
of supporting by at least
the frame
the
weight
one foot,
of the generator,
Contact
to the concrete
slab
a cement
using
3/8"
The
contractor diameter
Grounding Electrical
and
Investigate completed
permits
your local by licensed
A
may
be required
building and contractors.
for
electrical
the installation
codes
before
to locate
placement prevailing
THE
this unit.
systems.
Installation
must
be
GENERATOR
WEIGHS
APPROXIMATELY
100 POUNDS.
USE
EQUIPMENT WHEN MOVING CONNECT HOIST LINES TO
Generator
install
the generator
of a barrier for wind direction.
placement
the
protection.
on a concrete
the generator
should
allow
as close
length
outdoors
In normal
slab
or other
four
feet
as possible
of extension
6000W
ELECTRICIAN PERFORM THIS THAT PROCEDURE OTE: IT IS RECOMMENDED ONLY A TRAINED
Connect
where
cooling
air is readily
are not blocked of heavy winds weather
rain
the
drainage
of access
to all sides
to the electrical
tools
the
grounding
wire
rod (not included) that must be an earth-driven
• Date
Certifcate
Merrytin
Date:
Pursuant the terms issued
for
and
air vent
should
This
or flood
waters
maintenance.
equipment
being
powered
to
AGENCY,
Jiangdong
Group
Co.,
Output
120V
Continuous/rated
Ltd.
Peak
Wattage
Wattage
Outlet
12/23/2009 Director,
and
Compliance
and
Innovation
Strategies
Division,
Office
of
AC
@ 41.7A
60Hz
5000
W
small
Act (42 U.S.C. section 7547) and 40 CFR 90, and in those provisions, this certificate of conformity
non-road produced
of conformity
covers
engine in the only
family,
stated
those
new
more
model small
fully
described
in the
of conformity does not cover certificate. SMALL NON-ROAD
subiect to is hereby
documentation
specified
or suspended
non-road
small non-road engines imported ENGINE FAMILY: AJDGS.3892GA
This certificate does not delivered for introduction,
cover into
in 40 CFR 90. It is also or rendered
void
ab initio
120V
6000
W
outlets
Or_e 120V twisEiock
12V
Gasoline
8.3A
engine
year. engines
which
prior
conform
a term
Type
in
to the effective
date
4_cycle
Disp_acemelst
required by 40 This certificate
Oil
capacity
1.16
EPA approved
of this
for other
certifi
reasons
care
that
specified
this
OHV
recoil
quart
(1.1
liter)
certificate
yes
Fuel
in 40 CFR
small non-road engines sold, offered for sale, or introduced, or commerce in the U.S. prior to the effective date of the certificate.
Type
Unleaded
Capacity
6.6
Running Fuel
time
11 hours
gauge
Approximate
included
weight
1891bs.
32
gasoline
gallons
Weight
Downloaded from www.Manualslib.com manuals search engine
air_cooled
291cc
of the
It is a term of this certificate that the manufacturer shall consent to all inspections described in 40 CFR 90.126 and 90.506 and authorized in a warrant or court order. Failure to comply with the requirements of such a warrant or court order may lead to revocation or suspension of this for reasons
Four
DC electrical
Air Quality.
by 40 CFR 90 and
may be revoked Part 90.
Manuam
AC electrical
all material respects to the design specifications described in the documentation CFR 90 and which are produced during the model year stated on this certificate.
certificate
The
can
Owner's
PROTECTION
to Section 213 of Clean Air and conditions prescribed
certificate
generator
into the earth, can adequately
face
JDG-NRSi-10-12
for the following
required
(8) on the
12/23/2009
Zaw-Mon,
Transportation
LICENSED
of Conformity
Jiangsu
Issued:
AND
connector
Specifications
Numbetl
• Effective
ground
generator,
Current Year
the
driven at least 24 inches deep or brass rod (electrode) which
Generator
Manufacture_: • Certificate
has been copper
from
cords.
UNITED STATES ENVIRONMENTAL WASHINGTON, DC 20460 Model
included)
available.
Compliance
2010
(not
by obstructions such as or snowdrifts may require
conditions,
area where
a #6 AWG
to a grounding grounding rod ground
and
Install the generator not reach it.
reduce
power
Location
sure
Place
installing
CARE AND THE PROPER LIFTING OR HOiSTiNG IT TO THE INSTALLATION LOCATION. ALWAYS THE FRAME OF THE GENERATOR.
Install the generator so that the air inlets and outlets bushes, trees, or snow drifts. Locating it in the path the the
of emergency
_
'
WARNING.
General Make
other
(approx.)
on 1/2
load
6000W Generator Cylinder
head
system
6000W Generator
assy.
Cylinder barrel s 7
4
A APA
Part
No.
1_
APGG6000-A-01-JD
HEAD
COVER
COMP.
APGG6000-A-02-JD
HEAD
COVER
WASHER
APGG6000-A-03-JD
WASHER
APGG6000-A-04-JD
HEAD
COVER
COMP.
APGG6000-A-05-JD
HEAD
COVER
PACKING
APGG6000-A-06-JD
FLANGE
APGG6000-A-07-JD
SPARK
COVER
BOLT
BOLT COMP.
PACKING
(M1OX
80)
PLUG
APGG6000-A-08-JD
EXHAUST
APGG6000-A-09-JD
CYLINDER
PIPE
APGG6000-A-10-JD
CARBURETOR
APGG6000-A-11-JD
CYLINDER
APGG6000-A-12-JD
DOWEL
APGG6000-A-13-JD
AIR
STUD
HEAD
STUD HEAD
PIN
BOLT
COMP. BOLT
SEALING
PAD
((p10x(p12x20)
CLEANER
STAY
B
_4
APA Part No.
Description
Description
APGG6000-B-01-JD
FLANGE
APGG6000-B-02-JD
OIL
APGG6000-B-03-JD
O-RING
APGG6000-B-04-JD
FLANGE
APGG6000-B-05-JD
CRANK
BOLT
LEVEL
(M6X
SWITCH
14) ASSY.
14ram NUT M__ CASE
APGG6000-B-06-JD
BALL
APGG6000-B-07-JD
WASHER(e8.3xe17x1)
BEARING
(6207)
APGG6000-B-08-JD
LOCK
APGG6000-B-09-JD
GOVERNOR
APGG6000-B-10-JD
OIL
APGG6000-B-11-3D
DRAIN
PLUG
WASHER
APGG6000-B-12-JD
DRAIN
PLUG
BOLT
APGG6000-B-13-JD
OIL
SEAL
APGG6000-B-14-JD
OIL
PROTECTOR
APGG6000-B-15-JD
FLANGE
PIN
(10 ram) ARM
SHAFT
SEAL
(e35xe52x8)
BOLT
33
6000W Generator Crankcase
cover
system
6000W Generator
assy. Crankshaft
assy,
:o
C
\
APA
Part
No.
APGG6000-C-01
-JD
DUCT
APGG6000-D-01
COVER
APGG6000-C-02_JD
FLANGE
APGG6000-C-03-JD
OIL
SCALE
APGG6000-C-04-JD
OIL
SCALE
APGG6000-C-05_JD
OIL
S EAL(d)35xd)52x8)
BOLT
(M8
SEAL
FLANGE
APGG6000-C-07_JD
CRANKCASE
APGG6000-C-08-JD
GOVERNOR
GEAR
APGG6000-C-09-JD
GOVERNOR
GEAR
APGG6000-C-11
-JD
BOLT
X 35)
RING
APGG6000-C-06-JD
APGG6000-C-10-JD
D APA Part No.
Description
(M8X35) COVER
SLIDER
SHAFT
SLIDER
WASHER
APGG6000-C-12_JD
GOVERNOR
APGG6000-C-13-JD
BALL
BEARING
APGG6000-C-14-JD
BALL
BEARING
APGG6000-C-15_JD
CRANKCASE
APGG6000-C-16-JD
DOWEL
WASHER
_.6 mm)
SLIDER
PIN
(6202) (6207) COVER
(8X12)
35
Downloaded from www.Manualslib.com manuals search engine
PAD
(6 mm)
Description -JD
CRANKSHAFT
COMP,
6000W Generator Piston
& Connecting
Rod
6000W Generator
Assy.
Recoil
Starter
Assy.
_o
/ 6 8 7J
"_
E APA
Part
No.
Description
F APA
Part
No.
Description
APGG6000-E-01-JD
COMPRESSION
RING
A
APGG6000-F-01-JD
PIVOT
APGG6000-E-02-JD
COMPRESSION
RING
B
APGG6000-F-02-JD
ROCKER
APGG6000-E-03-JD
OIL
RING
A
APGG6000-F-03-JD
ROCKER
APGG6000-E-04-JD
OIL
RING
B
APGG6000-F-04-JD
PIVOT
BOLT
APGG6000-E-05-JD
PISTON
APGG6000-F-05-JD
PUSH
ROD
APGG6000-E-06-JD
PISTON
APGG6000-F-06-JD
ROD
APGG6000-E-07-JD
PISTON
APGG6000-F-07-JD
VALVE
APGG6000-E-08-JD
CONNECTING
ROD
APGG6000-F-08-JD
CAMSHAFT
CONNECTING
COVER
APGG6000-F-09-JD
VALVE
CONNECTING
ROD
APGG6000-F-10-JD
EX.
APGG6000-F-11-JD
VALVE
SPRING
APGG6000-F-12-JD
VALVE
SPRING
APGG6000-F-13-JD
IN. VALVE
APGG6000-F-14-JD
EX.
APGG6000-F-15-JD
IN. VALVE
APGG6000-E-09-JD APGG6000-Eq
0-JD
PIN
CLIP
(20
mm)
PIN
BOLT
ADJUSTING ARM
NUT
PIVOT
ARM M_ GUIDE
PLATE
PUSH LIFTER
ROTATOR
VALVE
SPRING
RETAINER
SEAT
SPRING
RETAINER
VALVE
37
6000W Generator Recoil
Starter
6000W Generator
Assy.
Fan
Cover
Assy. 4_
/1
G APA
Part
No.
H
Description
APGG6000-G-01-JD
RECOIL
STARTER
APGG6000-G-02-JD
SETTING
SCREW
ASSY
APGG6000-H-01-JD
SHROUD
APGG6000-G-03-JD
SPRING
RETAINER
APGG6000-H-02-JD
FLANGE
APGG6000-G-04-JD
PLATEN
SPRING
APGG6000-H-03-JD
FAN
APGG6000-G-05-JD
STARTER
APGG6000-H-04-JD
WIRE
APGG6000-G-06-JD
DETENT
APA
DETENT SPRING
APGG6000-G-07-JD
RECOIL
APGG6000-G-08-JD
START
STARTER
APGG6000-G-09-JD
RECOIL
STARTER
CASE
APGG6000-G-10-JD
RECOIL
STARTER
ROPE
APGG6000-G-11-JD
STARTER
APGG6000-G-12-JD
FLANGE
RETURN
REEL SPRING
KNOB BOLT
(M6X8)
39
Downloaded from www.Manualslib.com manuals search engine
COMP
Part
No.
Description
BOLT
COVER
(M6
X 14)
COMP
HARNESS
CLIP
6000W Generator Carburetor
APA
Part
6000W Generator
Assy.
Flywheel
No.
Assy.
,
Description
APGG6000d-01-JD
TUBE
CLIP
APGG6000d-02-JD
TUBE
A
APGG6000d-03-JD
TUBE
B
APGG6000d-04-JD
WIPE
HARNESS
APA
DASHPOT
APGG6000d-06-JD
MANUAL
CHECK
APGG6000d-07-JD
CARBURETOR
IRON
APGG6000d-08-JD
CARBURETOR
ASSY
CHOKE
VALVE STAY
Description FLYWHEEL
APGG6000-J-02-JD
SPECIAL
APGG6000-J-03-JD
COOLING
FAN
APGG6000-J-04-JD
STARTER
PULLEY
APGG6000-J-05-JD
FLYWHEEL
WOODRUFF
KEY
ASSY
GASKET
CARBURETOR
PAPER
APGG6000dN
0-JD
CARBURETOR
INSULATING
APGG6000dN
1-JD
INTAKE
PIPE
No.
APGG6000-J-01-JD
CLIP
APGG6000d-05-JD
APGG6000d-09-JD
Part
J
NUT
(M16)
GASKET PLATE
GASKET
41
6000W Generator Ignition
System
6000W Generator
Assy.
Control
Assy. _i
10
11 7,
K APA
Part
No.
Description
APGG6000-K-01-JD
NOISE
APGG6000-K-02-JD
IGNITION
SUPPERSSOR
APGG6000-K-03-JD
STOP
SWITCH
CORD
APGG6000-K-04-JD
STOP
SWITCH
CORD
APGG6000-K-05-JD
FLANGE
APGG6000-K-06-JD
CORD
COIL
BOLT
CAP
ASSY
ASSY
(M6
HOLDER
M
X 25) APA
Part
No.
Description
GROMMENT
43
Downloaded from www.Manualslib.com manuals search engine
APGG6000-M-01-JD
CONTROL
ASSY
APGG6000-M-02-JD
CONTROL
BASE
APGG6000-M-03-JD
CONTROL
ADJUSTING
APGG6000-M-04-JD
PAN
APGG6000-M-05-JD
FLANGE
APGG6000-M-06-JD
GOVERNOR
APGG6000-M-07-JD
THROTTLE
APGG6000-M-08-JD
GOVERNOR
APGG6000-M-09-JD
FLANGE
APGG6000-Mq
0-JD
GOVERNOR
APGG6000-Mq
1-JD
CONTROL
SCREW
COMP
(M5
BOLT
SPRING
X 34_[
(M6
X 14)
SPRING RETURN
SPRING
ROD NUT
(M6) ARM
ARM
BOLT
(M6)
6000W Generator Muffler
6000W Generator
Assy.
Air
Cleaner
N APA
Part
No.
Description
O APA
Part
No.
Description
APGG6000-N-01-JD
FLANGE
BOLT
(M8
X 16)
APGG6000-O-01-JD
AIR
CLEANER
COVER
APGG6000-N-02-JD
FLANGE
BOLT
(M6
X 12)
APGG6000-O-02-JD
AIR
CLEANER
ELEMENT
APGG6000-N-03-JD
MUFFLER
STAY
APGG6000-O-03-JD
FLANGE
APGG6000-N-04-JD
MUFFLER
PROTECTOR
APGG6000-O-04-JD
AIR
CLEANER
SEPARATOR
APGG6000-N-05-JD
MUFFLER
SIDE
APGG6000-O-05-JD
AIR
CLEANER
SEAL
APGG6000-N-06-JD
MUFF.
APGG6000-O-06-JD
AIR
CLEANER
APGG6000-N-07-JD
MUFFLER
APGG6000-O-07-JD
BREATHER
APGG6000-N-08-JD
MUFF.
APGG6000-N-09-JD
EX.
APGG6000-N-10-JD
EX PIPE
COMP
APGG6000-N-11-JD
FLANGE
BOLT
APGG6000-N-12-JD
FLANGE
NUT
INNER
COMP SEAL
PROTECTOR PROTECTOR
COMP
COMP OUTER
PIPE
PROTECTOR
CASE
COMP
GASKET
COMP
(M8
X 25)
(M8)
46
6000W Generator Tank
(M5)
GASKET
45
Fuel
NUT
COMP
6000W Generator
Assy.
Control
Box
Assy. 4
_i_7_I >
'"---.
3
3
12
APA
Part
No.
11
P
APA
Part
No.
6
5
Description
APGG6000-Q-01-JD
CONTROL
APGG6000-Q-02-JD
ENGINE
APGG6000-Q-03-JD
DC
APGG6000-Q-04-JD
HOURS
APGG6000-Q-05-JD
120V
APGG6000-Q-06-JD
CIRCUIT
APGG6000-Q-07-JD
120V
APGG6000-Q-08-JD
EARTH
APGG6000-Q-09-JD
CONTROL
PANEL
COMP
Description
APGG6000-P-01-JD
FUEL
FILTER
APGG6000-P-02-JD
FUEL
FILTER
CAP
APGG6000-P-03-JD
FUEL
TANK
APGG6000-P-04-JD
FUEL
METER
APGG6000-P-05-JD
FLAT
SCREW
APGG6000-P-06-JD
FLANGE
APGG6000-P-07-JD
AIR
APGG6000-P-08-JD
TANK
APGG6000-P-09-JD
COMP
COMP ASSY
BOLT
DUCT
WASHER
CUSHION
CONTROL
APGG6000-Pq
0-JD
FU EL TANK
APGG6000-Pq
1-JD
TUBE
APGG6000-Pq
2-JD
FU EL TUBE
BOX
COLLAR
SWITCH
12V OUTPUT METER RECE
RECE
PTACLE(L5-30)
TERMINAL
RUBBER
CLIP
Downloaded from www.Manualslib.com manuals search engine
PTACLE(Ru-22)
BREAKER
JOINT
47
ASSY
48
PANEL
SET CASE
7
8
Q
6000W Generator Frame
Cornp
6000W Generator
Assy.
Generator
_, 12 12
S lO
i
APA
R APA
Part
No.
Part
No.
Description
APGG6000-S-01-JD
STATOR
APGG6000-S-02-JD
STATORASSY
APGG6000-S-03-JD
COOLING
APGG6000-S-04-JD
BRUSH
APGG6000-S-05-JD
TAPPING
APGG6000-S-06-JD
RR
APGG6000-S-07-JD
PAN
APGG6000-S-08-JD
FLANGE
APGG6000-S-09-JD
AUTO
BOLT
APGG6000-R-02-JD
REAR NUT
APGG6000-R-04-JD
FLANGE
NUT
APGG6000-R-05-JD
FLANGE
BOLT
APGG6000-R-06-JD
MUFFLER
SUPPORTER(UPPER)
APGG6000-R-07-JD
MUFFLER
SUPPORTER(NETHER)
APGG6000-R-08-JD
BOLT
APGG6000-R-09-JD
NUT
AP
APGG6000-Rq
0-JD
GENERATOR
APGG6000-Rq
1-JD
CONTROL
APGG6000-Rq
2-JD
FRONT
APGG6000-Rq
3-JD
SCREW
G6000-Sq0-JD
SCREW
HOUSING SCREW BOLT
(M6X
VOLTAGE
ENERAT
179)
REG.
ASSY
R COVER
APGG6000-Sq
1-JD
CABLE
APGG6000-Sq
2-JD
FLANGE
APGG6000-Sq
3-JD
ROTOR
TIE
APGG6000-Sq
4-JD
BEARING
APGG6000-Sq
5-JD
PLAIN
APGG6000-Sq
6-JD
FLANGE
BOLT
(M10)
APGG6000-Sq
7-JD
FLANGE
BOLT
(M5)
BOLT COMP
FRAME PANEL
ASSY
BOX WASHER
COVER
49
50
6000W Generator
6000W Generator Wheel
Generator
No.
ASSY
COVER
APGG6000-R-03-JD
Part
FAN
Description
APGG6000-R-01-JD
APA
COVER
& Hand Assy.
3
Description
APGG6000-S-18-JD
HEX.BOLT
APGG6000-S-19-JD
VOLT
CHANGE
(M5
APGG6000-S-20-JD
PLAIN
WASHER
APGG6000-S-21-JD
HEX.
APGG6000-S-22-JD
SPRING
APGG6000-S-23-JD
CRANK
NUT
X 20) TERMINAL
BR-AC-W
5m_
M_ 12 WASHER
CASE
_
16)' _2714
(5mm)
GROMMET i
15
13
14
T
8 APA
Part
No.
Description
APGG6000-T-01-JD
PIN
APGG6000-T-02-JD
WSHER
APGG6000-T-03-JD
WHEEL
APGG6000-T-04-JD
BAFFLE
APGG6000-T-05-JD
SHAFT
APGG6000-T-06-JD
FLANGE
BOLT
APGG6000-T-07-JD
FLANGE
NUT
APGG6000-T-08-JD
RUBBER
BOLT
APGG6000-T-09-JD
FLANGE
NUT
SPLIT
APGG6000-Tq
0-JD
STANDER
APGG6000-Tq
1-JD
FLANGE
APGG6000-Tq
2-JD
NUT
APGG6000-Tq
3-JD
HANDLE
APGG6000-Tq
4-JD
BOLT
APGG6000-Tq
5-JD
BRACKET
APGG6000-Tq
6-JD
FLANGE
52
Downloaded from www.Manualslib.com manuals search engine
2
PLAIN
(M6X
BOLT
WITH BOLT
35)
(M6__
M6X_
LOCK
PIN
Distributed ALL-POWER 730 City www
by: AMERICA
S.Epperson
Dr.
Of Industry,CA91748 allpower
america.com
Downloaded from www.Manualslib.com manuals search engine
