Transcript
Models 6739 PRO-FIT® 6060
Corner Air Massage Bath
Features • 59-3/4" x 59-3/4" x 21-1/4" Corner air massage bath • Powerful, single-speed blower and air switch for reliable operation • Heating element warms the air before it enters the bathing well through the perimeter channel • 20 minutes after the bath is turned off the motor automatically blows any remaining residue out of the “Quick Drain” air channel • Limited One-Year Warranty • Available in Standard Colors: white, almond, biscuit, and bone Model 6739 (Shown with metal air switch and Lift and Turn drain)
Options Lift and Turn Drain Model # Description PF1320 PF1321 PF1322 PF1323
Polished Chrome Everbrass (PVD) Brushed Nickel Oil Rubbed Bronze
Model # Description SWAP00
Nailing flange kit
SWP150
Factory installed nailing flange
Metal Trim Model #
Description
PF2335
Polished Chrome
PF2336
Everbrass (PVD)
PF2337
Brushed Nickel
PF2338
Oil Rubbed Bronze
Printed in U.S.A. 12/12 © 2012 Mansfield Plumbing Products, LLC ® Pro-fit is a registered trademark of Mansfield Plumbing Products, LLC.
Model # PF1328
Description Removable corner apron
MADE IN USA Mansfield Plumbing Products LLC • Customer Service Toll Free 877-850-3060 • Fax 419-938-6234 Website: www.mansfieldplumbing.com • Email:
[email protected]
Models 6739 PRO-FIT® 6060
Corner Air Massage Bath
Specifications Model #
Description
6739
Codes/Standards
59-3/4" x 59-3/4" x 21-1/4" Corner Air Massage Bath
Specification
Description
Specification
Description
Material
Acrylic, fiberglass reinforced
Number of Jets
58
Construction
Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base
Water Capacity
60 gal. (min.) / 85 gal. (max.)
Blower Motor
120V, 60HZ, 6.0 Amp, Single Speed, 200 Watt Heater, Single Phase–Pre-mounted
Floor Loading Weight
47 lbs. / sq. ft. (229 kg/m2)
Electrical Requirements
120V, 15 Amp, GFCI protected
Shipping Weight
167 lbs.
On/Off Control
Air Switch
Warranty
Limted One Year
Technical Information OPTIONAL REMOVABLE APRON 84"
59 3/4"
59 3/4"
(1518 mm)
(1518 mm)
21
1 4
"
19
(540 mm)
57 1/2"
3
4"
(502 mm)
(1461 mm)
32" (813 mm)
DRAIN
32"
Recessed Toe Space
(813 mm)
STD
3"
(76 mm)
PLUMBING ROUGH-IN
ALT 59 3/4" (1518 mm)
22 1/4"
22 1/4"
(565 mm)
(565 mm) AIR SWITCH 52 1/2"
CENTER OVERFLOW
21
1 4
" 19
3
4"
(540 mm) (502 mm)
(1333 mm)
18" (457 mm)
84"
(2134 mm)
Blower Locations shown for clarity. STD - Standard Location, ALT - Alternate Location Required Blower Motor Access (20" W x 15" H)
*NOTE: If a factory installed nailing flange is added to a unit, add 1/8" to each side flanged.
Note: Measurements may vary 1/4" (+/-)
These dimensions are nominal and subject to change without notice. When tested for compliance to the requirements of ASME A112.19.7M for “Whirlpool Bath Appliances” and ANSI Z124.1.2M “American National Standard for Plastic Bathtub and Shower Units”, the tested units are found to comply and are acceptable for listing under IAPMO R & T. Certified for permanent electrical connection only. Printed in U.S.A. 12/12 © 2012 Mansfield Plumbing Products, LLC ® Pro-fit is a registered trademark of Mansfield Plumbing Products, LLC.
MADE IN USA Mansfield Plumbing Products LLC • Customer Service Toll Free 877-850-3060 • Fax 419-938-6234 Website: www.mansfieldplumbing.com • Email:
[email protected]
