Transcript
6210 Bridge and 6211 Bridge/Router Quick Installation Instructions Document Number 6210-A2-GZ13-00 January 2005
1 Connect the LINE
port of the modem to your DSL line using the supplied phone cord.
RESET LINE
PHONE
USB
LAN
DEFAULT
POWER
04-17517
4 Connect the POWER
OR
2 Connect the TELEPHONE port of the modem to your telephone using the cord that came with your telephone.
3
receptacle to the power supply and plug the power supply into a wall outlet.
Connect either: The LAN port of the modem to a 10/100BaseT Ethernet network interface card on your PC, or to hub or switch in your network. An Ethernet cable is supplied with your modem. or The USB port of the modem to a free USB port on your PC.
If you connected the USB port of the modem to your PC, the Found New Hardware Wizard appears on your computer screen. Insert the supplied CD in your CD drive and install the USB drivers on it as directed by the Wizard. See the user’s guide on the CD for important safety instructions and more information.
. *6210-A2-GZ13-00*
Copyright © 2005 Paradyne Corporation.
