Preview only show first 10 pages with watermark. For full document please download

63928225339540ccdb03

   EMBED

Share

Transcript

Aluminum & PVC & Wood Fabrication Machinery TUCANA-02 M: Manual End Milling Machine Standar d Equipme nt Air gun User’s manual Pneumatic twin clamps Optional E quipme nt Milling cutter set Profile fixtures Tec hnical Features Our horizontal end-millers are specially designed for milling sets of profiles (both aluminum and vinyl) in which the cutter unit needs to be changed several times in the same set. The cutting zone is fully guarded to protect the operator in all the machining operations. Technical features and specifications are subject to change without prior notice. Technical Features TUCANA-02 M 1.2 HP 1-Ph. 220V 60 Hz d=30mm D=Max.6.3” 3000 rpm 900.2 120 CFM psi 19”x23”x44” A T e c hM ac h i n e r y . c o m 309 Ridgemont Ave., Rockville, MD 20850 – USA Ph.: +1-240-505-1967 Fax: +1-301-560-6627 [email protected] 135 lbs