64 Series

Transcript

STANDARD FEATURES • • • • • • • • • • • • • • • • • • • • • • NEW Factory authorized startup ENERGY STAR® Qualified Dual-pawl cradle drive system One-piece cast stainless steel upper & lower spray arm assemblies Internal removable scrap basket and two-piece scrap screen Standard vertical opening accommodates 18" x 26" sheet pans Wide leakproof swing out insulated hinged doors on wash/rinse Anti-jam conveyor drive system Energy Sentinel (Idle pump shut-off) Convenient top-mounted controls Automatic tank fill Door safety switch Never leak, ball valve drain closure Enclosure panels (front and sides) Stainless steel heavy-gauge construction, including base and feet Electric tank heat Wash/rinse pump 2 Hp motors Stainless steel pump and impeller Two-point electrical connection Vent fan control switch Self-diagnostic controls Stainless steel rear manifolds CH067 PREWASH MODELS ONLY • External prewash scrap basket • Prewash pump 1 Hp motor • 22" Prewash • 26" Prewash • 36" Prewash Champion Industries, Inc. 2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 Tel: 905/562-4195 Fax: 905/562-4618 64 SERIES 64, 86 PW, 90 FFPW, 100 HDPW High-Temperature Rack Conveyor Dishwashing Machine Model 64 Shown with Vent Cowl and Damper Option Photo is for general visual representation only. Please refer to specifications for the latest detailed product information. SPECIFIER STATEMENT Specified unit will be Champion model 64 Series high temperature rack conveyor dishwashing machine. Features top mounted control cabinet; upper and lower one-piece stainless steel spray arm assemblies, removable internal scrap baskets with two-piece scrap screen. Swing out front insulated access doors. Anti-jam conveyor drive system. 1 year parts and labor warranty. Champion Industries, Inc. 3765 Champion Blvd., Winston-Salem, NC 27105 Tel: 336/661-1556 Fax: 336/661-1979 www.championindustries.com (1M) 12/15 Printed in U.S.A. Champion, an Ali Group Company 64 SERIES RACK CONVEYOR Project Item No. Quantity 17-3/8" 1A 2" 2 4-1/2" 1-1/2" 3-1/4" 3 4A 4A 64 SERIES 16" 26-1/2" 1A 2" 2 4-1/2" 3-1/4" 4B 1A 4-7/8" 46-5/8" 1-1/2" 4B 4-7/8" 16" 1A 26-1/2" 27" Door Opening Clearance 27" Door Opening Clearance 64, 86 PW, 90 FFPW, 100 HDPW High-Temperature Rack Conveyor Dishwashing Machine -B-A-DTM3- -A- -A- 50-1/4" Inside MODEL 64 50-1/4" Inside 36-3/8" 1200 lbs. Shipping weight crated: 64" 8" 8A 13" Plumbing Clearance 4" E22PW 8" 8" 8B 8A 3" E26FFPW 64" 8" 8B 90-1/4" 4" Vent Stack Distance 4" 2 Dimensions shown in inches [mm]34-1/4" 6" 1A 13" 87-5/8" Plumbing Clearance Vent Stack Distance 4" 3" 2 6" 1A 7-1/4" 7-1/4" 21-7/8" Opening 20" side Track 3-1/4" 58" Machine Height 2-1/2" 3 34" Load Height 9" 11-1/8" 5" 7-1/4" 4-1/4" 5 12-1/2" 6 29-3/4" 6 1B 17" 17" 4B 4B 11-1/8" 9" 7-1/4" 5" 4A 6-1/2" 4A 6 5 12-1/2" 3 1B 86" 22-5/8" 4A 23-7/8" 40-1/8" 7 32" 53-1/2" 5 7 5 2" 4-1/2" 2 2" 1A 2" 3 17-3/8" 1-1/2" 3-1/4" 4A 4B 4A 3-1/4" E90FFPW 4A 4B 29-1/2" 1A 2" 2 16" 26-1/2" 1-1/2" 2 46-5/8" 1-1/2" 3 17-3/8" 2" 1A 54-1/8" 3 4-1/2" 1A 4-7/8" 3-1/4" 4B 1A 4-7/8" 2" 2" 2 4-1/2" 16" 26-1/2" 68-1/4" 54-1/8" Vent Stack Distance 2 54-1/8" 2 2" E86PW E64 68-1/4" Vent Stack Distance 29-3/4" Front View Right to Left 16" Door 4B Clearance 68-1/4" Vent Stack 53-1/2" Distance 8-3/4" 5 90" 2" E64 8-5/8" 5 4-1/4" 6 22-5/8" 4A 32" 4B Front View Left to Right 3 8-1/4" 3 2-1/2" 20" Inside Track 3-1/4" 58" Machine Height 8-1/4" 8-1/4" 34" Load Height " 21-7/8" Opening 20" Clearance 20" Clearance 4-7/8" 16" 1A 26-1/2" 27" Door Opening Clearance 27" Door Opening Clearance Plan View Left to Right Plan View Right to Left 27" Door Opening Clearance 50-1/4" Inside -B-A-DTM3- -A- -A- 50-1/4" Inside 50-1/4" Inside 36-3/8" 8" 64" 8" 13" Plumbing Clearance 8A 4" 2 4" 3" 1A 6" 21-7/8" Opening 20" Inside Track /4" 58" Machine Height End View 58" Machine Height 64" 1A 3" 8A 1-1/2" 90-1/4"4" Can be up Vent Stack Distance to 10" 8" 4-1/4" 6 29-3/4" 4A 12-1/2" 22-5/8" 1B 6" 1A 5 6 4A 17" 17" 4B 4B 1-3/4" 4-1/4" 11-1/8" 9" 7-1/4" 5" 4A 6-1/2" 13" Plumbing Clearance 6 5 1B 21-7/8" Opening 2-1/2" 3 5/8" 8-1/4" 3 34" 9" 11-1/8" 5" 7-1/4" Load Height 2-1/4" 21" 12-1/2" 6 4A 86" 6 4B 22-5/8" 7 1B 6 4A 53-1/2" 4-1/4" 32" 53-1/2" 4B 5 6-1/2" 8-5/8" 5 5 90" 40-1/8" E64 17" 22-5/8" 4A 12-1/2" 3 20" Inside Track 3-1/4" 58" Machine Height 23-7/8" Due to an ongoing value4Banalysis32"program at Champion, specifications contained in this catalog are subject 5 753-1/2"to change without notice. Champion Industries, Inc.,7 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 •4Bwww.championindustries.com 32" 40-1/8" 2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618 5 87-5/8" Vent Stack Distance 3" 2 3 2-1/2" 9" 11-1/8" 5" 7-1/4" 29-3/4" 3 8B 4" Suggested Table Construction 20" 2-1/2" 3 8-3/4" 6" Clearance 8-1/4" 8-1/4" 6" Nominal Wall Clearance 8" 7-1/4" 34" 8-1/4" Load Height 34" Load Height 5 2 4" 20" Clearance 3-1/4" 20" Clearance 3-1/4" 8" E26FFPW 8B 4" 7-1/4" 2-1/2" 20" nside Track 8A 8B 7-1/4" 21-7/8" Opening E22PW 13" Plumbing Clearance E 34-1/4" 8" 64" 8" 5 8-3/4" 29-3/4" E8 3-1/4" 4A 4B 16" 1A 26-1/2" 64 SERIES 27" Door Opening Clearance 64, 86 PW, 90 FFPW, 100 HDPW High-Temperature Rack50-1/4" Conveyor Dishwashing Machine Inside -B-A-DTM3- -A- -A- 26" Door Clearance 36-3/8" 16" oor arance MODEL 86 PW WITH 22" PREWASH E22PW 8" 64" 36-3/8" Dimensions shown in inches [mm] E22PW E26FFPW 1375 lbs. Shipping weight crated: 34-1/4" 36-3/8" 34-1/4" E36HDPWE26FFPW 8" 8A 8B 4" 4" 90-1/4" 6" 1A 16" Vent Stack Distance Door 3" 2 Clearance 29-1/2" 13" Plumbing Clearance 21-7/8" Opening 2-1/2" 87-5/8" 26" Door Vent Stack Distance Clearance Front View 20" Inside Track 3-1/4" 58" Machine Height 1/4" 104-1/4" Vent Stack Distance 29-1/2" 7-1/4" 20" Clearance 1/2" 90-1/4" Vent Stack Distance 87-5/8" Vent Stack Distance 2-1/2" 8-1/4" 8-1/4" 8-1/4" 8-1/4" 34" Load Height 27" Opening earance 9" 11-1/8" " 5" Left to Right 17" -B-A-DTM3- Right to Left -A- -A- 26" Door Clearance 4B 36 4A 12-1/2" 6 5 4-1/4" 6-1/2" 86" 22-5/8" 4A 36-3/8" 34-1/4" 23-7/8" 8-3/4"8-5/8" 5 5 5 2-1/2" 6" Nominal Wall Clearance 29-3/4" 90" 8-1/2" 5 100" 86" 34-1/4" 36-3/8" 90" 36-3/8 7 MODEL 90 FFPW WITH PREWASH E22PW26" FRONT FEED E26FFPW E26FFPW E36HDPW 32" E36HD 4B 53-1/2" 5 Shipping weight crated: 1400 lbs. E64E86PW " umbing earance E90FFPW 90-1/4" 87-5/8" Vent Stack Distance 104-1/4" 26" Vent Stack Distance E100HDPW E90FFPW E86PW Door Vent Stack Distance 29-1/2" Clearance 104-1/4 87-5/8" Vent Stack D Vent Stack Distance -1/4" 21-7/8" Opening 20" Inside Track 3-1/4" ne ht Front View 2-1/2" 8-1/4" 8-1/4" 8-1/4" 8-1/4" 8-1/4" Left to Right 8-3/4" 8-5/8" 5 6" 5 36-3/8" 22PW 29-3/4" 5 2-1/2" Nominal Wall Clearance 90" 36-3/8" 34-1/4" 8-1/4" Right to Left 8-1/2" 5 5 4-5/8" 100" 86" 100" 90" 36-3/8" MODEL 100 FFPW WITH 36" HEAVY DUTY PREWASH E26FFPW E36HDPW E36HDPW 1550 lbs. Shipping weight crated: E90FFPW 90-1/4" 104-1/4" t Stack Distance Vent Stack Distance E100HDPW E90FFPW E86PW E100H 104-1/4" 87-5/8" Vent Stack Distance Vent Stack Distance Front View 8-1/4" 8-1/4" 8-1/4" 8-1/4" Left to Right 5 2-1/2" 86" 8-1/2" 5 Right to Left 5 5 4-5/8" 100" 90" 14-1/2" 100" NOTE: For complete machine dimensions, plan view, end view, specifications and table construction see 64 drawing page. 64 SERIES 64, 86 PW, 90 FFPW, 100 HDPW High-Temperature Rack Conveyor Dishwashing Machine Dimensions shown in inches Utilities 1 Electrical Connection A Machine electrical connection B Booster electrical connection 2 Hot Water Main connection 3/4" NPT 3 Cold Water Contact Factory 4 Hot Water Tank A Heat inlet connection 1" NPT B Heat return connection 1" NPT 5 Drain Connection 1 1/2" NPT 6 Steam 64 ONLY TABLE A - Machine Connection Machine only Elec. Specs. Rated Amps Minimum Supply Ckt. Conductor Ampacity Minimum Overcurrent Protective Device Elec. Specs. 208/60/3 90 110 110 208/60/3 95 125 125 240/60/3 80 100 100 240/60/3 83 100 100 480/60/3 40 50 50 480/60/3 41 50 50 575/60/3 31 40 40 575/60/3 32 40 40 64 ONLY TABLE B - Booster Connection 40°F/22°C Rise – 15 kW Electric built-in booster (booster only) Inlet connection 1 1/4" NPT 7 Condensate Connection 1" NPT return to boiler 8 Vents A B Stack connection - Load end 200 CFM @ 1/4" static pressure Stack connection - Unload end 400 CFM @ 1/4" static pressure Warning: Plumbing and electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary, safety codes and the National Electrical Code. Note: Water Hammer Arrestor (meeting ASSE-1010 standard or equivalent) to be supplied (by others) in common water supply line at service connection. Plumbing Notes: Because of the variation in house-supplied steam and water pressures, steam and water pressure regulating valves (PRVs) may be needed. (Water PRV is standard on machines with booster.) The PRVs can either be purchased from Champion or obtained locally. Venting Notes: Fabricated duct size: 3-7/8" x 15-7/8" (Outside dimensions) 86 PW, 90 FFPW, 100 HDPW TABLE A - Machine Connection Machine only Elec. Specs. Rated Amps Minimum Supply Ckt. Conductor Ampacity Minimum Minimum Supply Ckt. Overcurrent Rated Conductor Protective Device Amps Ampacity 86 PW, 90 FFPW, 100 HDPW TABLE B - Booster Connection 40°F/22°C Rise – 15 kW Electric built-in booster (booster only) Minimum Overcurrent Protective Device Elec. Specs. Minimum Minimum Supply Ckt. Overcurrent Rated Conductor Protective Device Amps Ampacity 208/60/3 42 50 50 208/60/3 42 50 50 240/60/3 36 45 45 240/60/3 36 45 45 480/60/3 18 25 25 480/60/3 18 25 25 575/60/3 15 20 20 575/60/3 15 20 20 70°F/39°C Rise – 24 kW Electric built-in booster (booster only) Elec. Specs. Rated Amps Minimum Supply Ckt. Conductor Ampacity 70°F/39°C Rise – 24 kW Electric built-in booster (booster only) Minimum Overcurrent Protective Device Elec. Specs. Minimum Minimum Supply Ckt. Overcurrent Rated Conductor Protective Device Amps Ampacity 208/60/3 67 80 80 208/60/3 67 80 80 240/60/3 58 70 70 240/60/3 58 70 70 480/60/3 29 35 35 480/60/3 29 35 35 575/60/3 24 30 30 575/60/3 24 30 30 Machine and steam built-in booster Elec. Specs. Rated Amps Minimum Supply Ckt. Conductor Ampacity Machine and steam built-in booster Minimum Overcurrent Protective Device Elec. Specs. Minimum Minimum Supply Ckt. Overcurrent Rated Conductor Protective Device Amps Ampacity 208/60/3 15 20 20 208/60/3 20 25 25 240/60/3 14 20 20 240/60/3 17 25 25 480/60/3 7 15 15 480/60/3 9 15 15 575/60/3 6 15 15 Contact factory for single phase information. Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice. Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com 2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618 64 SERIES 64, 86 PW, 90 FFPW, 100 HDPW High-Temperature Rack Conveyor Dishwashing Machine SPECIFICATIONS Capacity Racks per hr. (NSF rated) Wash tank (US gal.) Conveyor speed (ft/min.) Motor Horsepower Drive Wash Rinse Water Consumption US Gal. per hr. (max. use) US Gal. per rack Heating Tank Heat, electric (kW) Tank heat, steam (lbs/hr. required at 15 PSI flow pressure) Electric booster (built-in) (kW supplied for 40°F rise) Electric booster (built-in) (kW supplied for 70°F rise) Steam booster (lbs./hr. required for 40°F rise) Steam booster (lbs./hr. required for 70°F rise) 277 21 7.7 1/6 2 2 124 .45 Load end (minimum CFM) Unload end (minimum CFM) Standard 20" x 20" rack complement Peg Flat www.championindustries.com NEW Durable Stainless Steel Start/Stop Switches One-Piece Cast Stainless Steel Spray Assembly Stainless Steel Built-in Nested Booster Two-Piece Scrap Screen Built-in Scrap Basket for ease of cleaning 25 125 15 24 75 120 Booster heaters completely inter plumbed, Controls are interwired Venting NEW Exclusive Digital Gauges 200 400 2 1 MODEL 64 RACK CONVEYOR 64 SERIES 64, 86 PW, 90 FFPW, 100 HDPW High-Temperature Rack Conveyor Dishwashing Machine OPTIONS & ACCESSORIES :: Tank heat: choice of steam coil, steam injector, hot water coil :: 2 Hp prewash motor :: 48" Blower-dryer - steam or electric :: Booster Heaters (completely interplumbed, controls are interwired) :: Steam: 40°F or 70°F rise :: Electric: 15 kW (40°F rise) (built-in only) :: Electric: 24 kW (70°F rise) (built-in only) :: Heat Recovery Cantilever sideloader (with or without hood) for 90° load operation :: 24" Sideload NEW CCT 90 90° Corner Conveyor Table (shown) NEW CCT 180 180° Corner Conveyor Table also available :: 30" Sideload (accepts sheet pans) :: Extended pawl bar (extended drive unit) for use with load tabling Cantilever Sideloader :: Racks: peg or flat racks (specify type) :: Steam pressure regulating valve (unmounted) (No hood) :: Table limit switch, unmounted (recommended on all rack conveyor installations) :: Vent cowl, stainless steel with 7" stack and locking damper :: Extended vent hood, stainless steel with 7" stack and locking damper :: Water pressure regulating valve (unmounted) (standard with booster) :: Water hammer kit :: Drain tempering kit :: Vertical clearance through machine: 24" (instead of standard 20") for larger ware :: Model CCT 180 (180° Corner Conveyor Table) :: Model CCT 90 (90° Corner Conveyor Table) :: Model RCT 64 or RCT 84 Roller Conveyor Table (See factory for custom length) Model RCT 64 or RCT 84 Roller Conveyor Table :: Splash Shields ::NEW Champion ION scale prevention system Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice. ‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission. Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com 2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618