Preview only show first 10 pages with watermark. For full document please download

65-270

   EMBED

Share

Transcript

R Tel (323) 465-2131, Fax (323) 465-3504 Visit us on the web at www.calrad.com CALRAD ELECTRONICS 819 N. Highland Ave. Los Angeles, CA 90038 Part No. HDMI Cable Tester HDMI Jacks Part number 65-270 Part number 65-270 Red Data Green Data Blue Data Clock CEC 12C Clock +5 Volts Hot Plug R ELECTRONICS Calrads 65-270 HDMI cable tester is especially useful when cable is installed inside a wall, between two rooms. Simply connect one end of the cable to the main unit, the other end to the remote unit. The remote unit provides 9 red L.E.D indicators for each signal path. Each signal path is tested automatically. All connections are HDMI female type. Requires standard 9V battery, not included. The 65-270 may also be used to test DVI or HDMI to DVI cable assemblies. Simply use a DVI to HDMI adapter (not included) to change the DVI to HDMI use Calrad part number 35-716. Features: 12C Data CALRAD 65-270 R CALRAD ELECTRONICS HDMI HDMI Cable Tester Transmitter Cable Tester Receiver * 8 Easy to read Red L.E.Ds * 9Vdc Battery powered Transmitter * Gold Plated HDMI Jacks for accurate long term usage * Test HDMI, DVI cables * Compatible with all HDMI and DVI cables Perfect for system integrators and A\V installers! Pre-test and vertify that all your HDMI cables work after (Pre-Wire), before the walls are closed up and your HDMI cables are permanently installed. The 65-270 only checks for continuity and does not test for poor shielding or validate the full HDMI 1.3b specification for proper signal integrity or digital hanshaking. HDMI Cable L.E.D Signal Indicators Part number 65-270 Part number 65-270 Red Data Green Data Blue Data Clock CEC 12C Clock 12C Data +5 Volts Hot Plug Specifications Optional 35-716 HDMI Male to DVI Female Adapter HDMI Connectors x 2 Requires standard 9V battery, not included Dimensions (Main Unit): 5.3" (H) x 2.75" (W) x 1.1" (D Dimensions (Remote Unit): 5.3" (H) x 2.75" (W) x 1.1" (D) L.E.D indicators provide independent test of each of the following signal paths: TDMS Red TDMS Green TDMS Blue TDMS Clock CEC 12C Clock 12C data +5V Hot Plug All specifications subject to change without notice R CALRAD ELECTRONICS R CALRAD ELECTRONICS HDMI HDMI Cable Tester Transmitter Cable Tester Receiver Media Management And Home Automation www.xlobby.com Copyright Calrad Electronics 2009