Transcript
Cinta Braided Cable PRODUCT SPECIFICATION
C2FP
Braided Cable, 0.400 inch diameter, 30 - 3000 MHz, Standard with Polyethylene Jacket CHARACTERISTICS Mechanical Specifications Minimum Bending Radius in (mm) Bending Moment lb-ft (N-M) Cable Weight lb/ft (kg/m) Tensile Strength lb (kg) Flat Plate Crush Strength lb/in (kg/mm)
1.00 (25.40) 0.50 (0.68) 0.087 (0.13) 160 (72.6) 40 (0.7)
Electrical Specifications Maximum Frequency (GHz) Velocity (percent) Impedance (Ohms) dc Breakdown (volts) Peak Power Rating (kW) Inner Conductor dc Resistance ohms/1000 ft (ohms/1000 m) Outer Conductor dc Resistance ohms/1000 ft (ohms/1000 m) Jacket Spark (volts RMS) Capacitance pF/ft (pF/m) Shielding Effectiveness (dB) Phase Stability (ppm/C)
16.2 85 50 2500 10.4 1.37 (4.49) 1.71 (5.61) 8000 23.9 (78.4) >90 <10
Construction Materials Inner Conductor Material Dielectric Material Shield Material Jacket Material
Solid BCCAI Polyethylene Foam Aluminum Tape / Tinned Copper Braid Black Polyethylene
Dimensions Diameter Inner Conductor in (mm) Diameter Dielectric in (mm) Diameter Braid in (mm) Diameter Over Jacket in (mm)
0.108 (2.74) 0.285 (7.24) 0.320 (8.13) 0.400 (10.16)
Environmental Specifications Storage Temperature °C (°F) Installation Temperature °C (°F) Operating Temperature °C (°F) Recommended Use
-70 to +85 (-94 to +185) -40 to +85 (-40 to +185) -40 to +85 (-40 to +185) Outdoor
Customer Support Center: This Specification Sheet is for reference only and is subject to change without From North America: 1-800-255-1479 notice. Copyright © 2002 by Andrew Corporation, Printed in U.S.A. 07/27/2005 International: +1-708-873-2307
www.andrew.com
Cinta Braided Cable PRODUCT SPECIFICATION
C2FP
Braided Cable, 0.400 inch diameter, 30 - 3000 MHz, Standard with Polyethylene Jacket CHARACTERISTICS Connectors Part Number
Connector Type
Special Characteristics
Inner Contact Attachment
Grade
400PNF-C-CR
N Female
Captivated
Standard
400PNF-BHC
N Female
Captivated
Standard
400PTM-C
TNC Male
Captivated
Standard
400PTR
TNC Male
Solder
Standard
400PDM
7-16 DIN Male
Solder
Standard
400PSM-CR
SMA Male
Solder
Plated
400APNM
N Male
Solder
Plated
400APNM-C
N Male
Captivated
Plated
400PDF-PMC 400PDF-BHC-CR
7-16 DIN Female 7-16 DIN Female
Captivated Captivated
Plated Plated
400PBM-CR
BNC Male
Solder
Standard
400PNR-C-CR
N Male
Captivated
Plated
400PDFR-BH
7-16 DIN Female
Crimp Outer Contact Attachment Bulkhead, Clamp Outer Contact Attachment Clamp Outer Contact Attachment Right Angle, Clamp Outer Contact Attachment Clamp Outer Contact Attachment Crimp Outer Contact Attachment Clamp Outer Contact Attachment Spring Finger, Clamp Outer Contact Attachment Panel Mount Bulkhead, Crimp Outer Contact Attachment Crimp Outer Contact Attachment Right Angle, Crimp Outer Contact Attachment Right Angle, Clamp Outer Contact Attachment
Solder
Plated
400PTM-CR 400PNR-C
TNC Male N Male
Solder Captivated
Standard Plated
400PUM
UHF Male
Solder
Plated
400PNR
N Male
Solder
Plated
400PDF-C 400PNM-C-CR 400PDM-C-CR 400APNM-CR
7-16 DIN Female N Male 7-16 DIN Male N Male
Captivated Captivated Captivated Solder
Standard Standard Plated Plated
Clamp Outer Contact Attachment Clamp Outer Contact Attachment 50 Ohm Mating Pin, Right Angle 50 Ohm Mating Pin 50 Ohm Mating Pin 50 Ohm Mating Pin
Customer Support Center: This Specification Sheet is for reference only and is subject to change without From North America: 1-800-255-1479 notice. Copyright © 2002 by Andrew Corporation, Printed in U.S.A. 07/27/2005 International: +1-708-873-2307
www.andrew.com
Cinta Braided Cable PRODUCT SPECIFICATION
C2FP
Braided Cable, 0.400 inch diameter, 30 - 3000 MHz, Standard with Polyethylene Jacket CHARACTERISTICS Cable Lengths Part Number
Description
Order Length
C2FP-500KT C2FP-1000KT
Standard Standard
500 FT Reel 1000 FT Reel
Customer Support Center: This Specification Sheet is for reference only and is subject to change without From North America: 1-800-255-1479 notice. Copyright © 2002 by Andrew Corporation, Printed in U.S.A. 07/27/2005 International: +1-708-873-2307
www.andrew.com
Cinta Braided Cable PRODUCT SPECIFICATION
C2FP
Braided Cable, 0.400 inch diameter, 30 - 3000 MHz, Standard with Polyethylene Jacket CHARACTERISTICS Performance (Typical) Frequency (MHz)
Attenuation (dB/100 ft)
Attenuation (dB/100 m)
Average Power (kW)
30 50 150 220 450 900 1500 1800 2000 2500 3000
0.76 0.97 1.5 1.9 2.7 3.9 5.1 5.6 5.9 6.7 7.5
2.5 3.2 5 6 8.8 12.7 16.7 18.4 19.4 22 25
2.9 2.3 1.5 1.2 0.83 0.58 0.43 0.4 0.37 0.33 0.29
Standard Conditions: For Attenuation. VSWR 1.0, ambient temperature 20ºC (68ºF). For Average Power. VSWR 1.0, ambient temperature 40ºC (104ºF), inner conductor temperature 100ºC (212ºF); no solar loading. Customer Support Center: This Specification Sheet is for reference only and is subject to change without From North America: 1-800-255-1479 notice. Copyright © 2002 by Andrew Corporation, Printed in U.S.A. 07/27/2005 International: +1-708-873-2307
www.andrew.com
