Transcript
StarServe
Contractor Series Dual Channel Modulator with IR 8072VMPIR Series
The StarServe 8072VMPIR Contractor Series Video Modulator is a multichannel modulator unit, housed in a set top box. The 8072VMPIR is designed to take multiple Baseband (Composite) video signals from VCRs, DVDs or Set Top Boxes and converts them into userselected Broadband channels (UHF 21–69). Once connected to a StarServe Video Distribution Unit (VDU), these Broadband channels can be viewed on any connected television, within the home. The user selects the output frequency (Broadband channel) using the seven segment, two digit display and up/down push buttons located on the front of the modulator unit. Any TV connected to the output via coax can receive the signal, when tuned to the same Broadband (UHF) channel. The 8072VMPIR features a 5V IR engine and connections for IR emitters. This allows remote TV locations to have IR
clipsal.com/cis
control of the connected components (VCRs, DVDs and Set Top Boxes), when used with an 8073/8VHPIR StarServe Contractor Series Video Hub. The 8072VMPIR StarServe Contractor Series Dual Channel Video Modulator utilises leading edge drift free circuitry, providing high quality picture reproduction throughout the home. A 75Ohm/HI-Z switch is located on the rear of the unit for selecting signal termination or the looping of video signals. The unit can be powered by connecting a 12V DC regulated Power Pack directly to the unit or via a StarServe wall plate (2031RFT Series). For convenient mounting the units are housed in a set top box.
Typical Connection diagram
DVD
8050LD Single Head Infrared Emitter Lead VCR
8072VMPIR 2 Channel modulator with IR
Connect to composite audio & video output
Connect to composite audio & video output
WARNING: DO NOT POWER THE VDU LOCALLY WHEN USING A 2031 RFVT OR MULTI CHANNEL MODULATOR.
External Antenna
8050TR Infrared Target
8073/8VHPIR Video Hub with Infrared Engine Connect to RF input 8050LD Single Head Infrared Emitter Lead
Connect to RF input TV
8072VMPIR - With DVD & VCR
Product Specifications RF Input (Video Video Input Termination (switch selectable) Audio Differential Gain Differential Phase Signal/Noise Modulation Channel Ranges Output Level IM Distortion Dimensions (L x W x D) Shipping Weight
Clipsal Integrated Systems Pty Ltd Head Office 12 Park Terrace, Bowden South Australia 5007 PO Box 103 Hindmarsh South Australia 5007 Telephone (08) 8440 0500 International +61 8 8440 0500 Facsimile (08) 8346 0845 International +61 8 8346 0845 Internet www.clipsal.com/cis E-Mail
[email protected]
International Enquiries Head Office Export Department Telephone +61 8 8269 0587 Facsimile +61 8 8340 7350 E-Mail
[email protected] New Zealand Clipsal Industries (NZ) Ltd (Auckland) Telephone +64 9 576 3403 Facsimile +64 9 576 1015 E-Mail
[email protected]
1V Peak to Peak @ 75 75 in normal mode (NORM) >1M in loop through mode (LOOP) 300mV Peak to Peak 3-5% <4º 54dB PAL (AUS) UHF 21-69 +25 dBmV (+85 dBuV) -55dBC 192mm x 135mm x 39mm 2kg
Malaysia Clipsal Integrated Systems (M) Sdn Bhd Unit 3-2 Level 3, CP Tower No 11, Jalan 16/11, Seksyen 16 46350 Petaling Jaya, Selangor, Malaysia Telephone +60 3 7665 3555 Facsimile +60 3 7665 3155 E-Mail
[email protected] Singapore CIS Pte Ltd (Singapore) No. 8, Jurong Town Hall Road #24-05/06 The JTC Summit Singapore 609434 Telephone +656 266 1998 Facsimile +656 266 3922 E-Mail
[email protected]
Hong Kong Clipsal Integrated Systems (HK) Limited Telephone +852 2 487 0261 South Africa Clipsal South Africa (Pty) Ltd Telephone +27 11 314 5200 Taiwan Clipsal (Taiwan) Co Ltd Telephone +886 2 2558 3456 Thailand Clipsal Thailand Ltd Telephone +66 2 952 5338 United Kingdom Clipsal Ltd (UK) Telephone +44 1628 508 530
International Representatives China Clipsal China Ltd Telephone +86 755 246 1122
Patented © Copyright Clipsal Integrated Systems Pty Ltd 2003
