Transcript
FRONT
BACK TEMPERATURE °C/°F FORMAT In temperature display, press WAVE button once to select between °C or °F.
71617 MONTREAL RC ALARM CLOCK Thank you for your purchase of this quality clock INTRODUCTION The Radio Controlled Mechanism fitted to your clock has a built in receiver which is tuned into the National Physical Laboratory MSF transmitter based in Anthorn, Cumbria, UK. The advantage of using this Technology are: 1. Automatically adjusts the clock of Summer/Winter time changes. 2. Automatic precision 3. Fully Automatic set up – Simply insert battery
LCD RC CLOCK SCREEN DESCRIPTION
FOREIGN TIME ZONE If you would like your clock to display a different time zone (e.g. a location abroad), but would like to maintain the radio controlled accuracy then use the foreign time zone setting. Find out how many hours ahead/behind the time zone is. Press the button for 5 seconds, the ‘F’ icon will appear for the foreign time zone display. Press and hold the SET button for 5 seconds, the hour digit will flash. Press the / button to set the hour. Press SET button to complete. To select between foreign time zone display and normal display, press button for 5 seconds, DUAL TIME DISPLAY (Manual set only) Your clock has a feature of storing a second time, maybe a holiday destination, a relative abroad or business contact. To set this time, press the SET button to select the Dual time display. Press SET button for 5 seconds and hour will flash, press / button to set. Press SET button once and the minute will flash, press the / button to set. Press SET button to complete. MSF RECEPTION DIFFICULTIES Like any receiver your clock needs a good signal to work properly. The main causes of reception failure are .... Atmospheric and local interferences. Interference from electrical equipment e.g. TV, c omputer or radios. Location of the clocks internal receiver within the building. Reduced local signal due to steel framed structure. Outside the normal transmission. The following suggestion may help improve reception of the MSF signal: Check that the battery/ies are new and in good condition. Check that the battery/ies are inserted correctly. Try rotating the clock as the internal receive that picks up the signal is most effective when it is facing directly towards or away from Anthorn. Try moving your clock to a new location away from any electrical equipment e.g. TV, computer or radios, and start the set up again or remove the battery/ies and insert again after 5:30pm. Due to local interference the signal is stronger between midnight & 5am.
SET
ALARM
WAVE
GB TO INSTALL/REPLACE BATTERY Open the battery compartment cover and insert the battery observing the polarity marking inside the compartment. All segments will display briefly and the clock will show am 12:00 1 D 1 M TH. The clock will automatically search for the time signal and the Radio signal icon ‘ ‘ or ‘ ‘ will flash. If the clock receives the time signal it will set automatically within 5 minutes and the Radio signal icon will remain on the display. If the clock does not receive the time signal it can be set manually. MANUAL SET Press SET to select temperature display Press and hold the SET button for 5 seconds, the year will appear and flash. Press / button to set year. Press SET button and month digit will flash, press / button to set. Press SET button and date digit will flash, press / button to set. Press SET button and hour digit will flash, press / button to set. Press SET button and minute digit will flash, press / button to set. Press SET to complete. DISPLAY TEMPERATURE, ALARM 1, 2, DUAL TIME Press SET button to select between displaying Temperature, Alarm 1, Alarm 2 or Dual time. SET ALARM 1 AND 2 Press SET to select alarm 1 or alarm 2 will display for Alarm 1 or icon for Alarm 2. Note: Alarm Icon Press SET button for 5 seconds and hour will flash, press / button to set. Press SET button once and minutes will flash, press / button to set. Press SET button to complete and alarm bell ‘ ‘ will appear for Alarm 1 ‘on’ or ‘ ’ for Alarm 2 ‘on’. TURN ON/OFF ALARM 1 & 2 Press ALARM button to turn on or off Alarm 1 and 2. The Bell icon ‘ ‘ or ‘ ‘ will display when alarm is turn on. When the alarm sounds, press ALARM button to turn off alarm until same time next day. SNOOZE/LIGHT Press to light the display for a few seconds. Press to activate snooze during alarm, after which the alarm will sound again approximately 5 minutes later. CHANGING THE DAY OF THE WEEK LANGUAGE Language available English (EN), German (GE), French (FR), Italian (IT), and Spanish (SP). Press and bold the button to select between languages for day of week, release button when complete. 12/24 HOUR FORMAT Press the button once to select between 12/24 hr formats.
Note: During initial set up, the clock will search for the time signal every hour for the first 24 hours, if the signal is weak and the clock has not set, move your clock to a new location, press the WAVE button for 5 seconds to start the radio controlled signal search. RESET BUTTON (at the back of the clock) - Press to reset the clock. Interruption to the MSF signal The Anthorn transmitter is periodically shut down for scheduled maintenance resulting in no signal being transmitted. For dates of the schedules maintenance visit www.npl.co.uk/server.php?show=ConWebDoc.1001 or call the NPL MSF record message on (0)20 8943 6493. CHANGING THE BATTERY It is recommended that you replace the battery annually even if the product is still running. Only use 1 X AAA (1.5V) Alkaline batteries in this clock. Remove the battery if the clock is stored or not in use. Remove exhausted battery from the product. Warning: Do not recharge non-rechargeable batteries. Please dispose of used battery in a responsible manner. For more information please contact your local authority. MAINTENANCE A soft cloth may be used to clean your clock. Do not use any corrosive cleaner or chemical solutions on the clock. Keep the clock clean and dry to avoid any problems. YOUR GUARANTEE Your clock is guaranteed for 12 months from the date of purchase against any faults arising from defective material or manufacture. Damage caused through careless handling, misuse or in transit expressly excluded. Should this clock fail within 12 months please return it in the first instance to your retailer. If you have any queries, problem or do not understand any part of these instruction please contact: Customer Help Line (01908) 449208 or call 0845 1207208 Mon – Fri 9.00am – 4.30pm email for service :
[email protected] or visit www.acctim.com Environmental Protection Disposal of electrical & electronic equipment Do not dispose of this product with household waste. For the proper treatment, recovery and recycling please take this product to the appropriate collection point. If you are unsure of where this is contact your local authority. Improper disposal may be harmful to the environment. V.1.
