Transcript
Wireless Thermostat (WTS10) Override Guide
MON May 16
Mode
AUTO FAN AUTO
MENU
72
5:30p
°
F
63
1
HEAT 68 COOL 79
2 1
CONFIRM
3
3
4
5 2
To override the Auto program: 1 Press the
or
button to activate the display.
To change the individual Mode settings: 1 Press the
or
button to activate the display.
2 Press the to raise or button to lower both the Heat and Cool set points.
2 Press the - button to select Heat/Cool mode; press the + button to select the Fan mode.
3 Confirm the settings by pressing the middle button.
3 Press the
or
button to select the mode.
4 When the desired mode appears, press the middle button to CONFIRM. 5 Press the button to raise or button to lower the set point for the currently selected mode.
Call 1 888 694 3533
products.currentbyge.com
GE is a trademark of the General Electric Company. All other trademarks are the property of their respective owners. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. Current and GE Lighting are businesses of the General Electric Company. © 2017 GE
DT100 (Rev. 10.2.17)
