Transcript
75-07314-080 说明书
材质：双铜 80g
尺寸：38mmX93mm
折叠方式：拉折页 Thank you
Exclusively Distributed by
• Headset battery meter display on iPhone/iPad
3
7
4
• Comfortably fit either ear
8
5 6
Package Content ① Multi-function button ② Charging port ③ Volume + ④ Volume -
Feature • Cutting-edge Bluetooth 4.0 technology • Easy set up in minutes with most Bluetooth devices • Up to 5 hours of talk time or 140 hours of standby with a single charge • Excellent sound quality with latest CVC 6.0 Echo/Noise cancellation technology for better clarity
1
Made in China
• Multipoint support connection with 2 devices at the same time
2
3.7v --- 80mA
USER MANUAL
We appreciate your choice of QCY “Jack” J02 Bluetooth headset exclusively distributed by TaoTronics. Please read this manual carefully. Make sure you understand all information before using this headset. If you need any assistance, please feel free to contact us.
Charging
Buttons and connections
Bluetooth V4.0
BLUETOOTH HEADSET
profile • Voice notification
⑤ Mic ⑥ LED indicator ⑦ Power on ⑧ Power off
North America E-Mail:
[email protected] Tel: 1-888-456-8468 # 4 (Monday-Friday: 9:00 – 18:00 PST) Address: 2880 Zanker Rd, Suite 203, San Jose, CA 95134
Asia Pacific Website: www.taotronics.com E-Mail:
[email protected](Japan)
Europe Union Website: www.taotronics.com E-Mail:
[email protected] (United Kingdom)
[email protected] (Germany)
Reset to factory default setting Connect the headset to a charging source and make sure it is charging (see section “Charging” for more details). When the device is in charging mode, press and hold the multi-function button until you see the red LED indicator flash 3 times. This will reset the headset to factory default setting.
[email protected] (France)
[email protected] (Spain)
[email protected] (Italy) EU Importer: ZBT International Trading GmbH Lederstr 21a, 22525 Hamburg, Deutschland
Understanding the LED indicator Status / Action
LED indicator
Turn ON Turn OFF Headset has been turned ON
Red light is on for 2 seconds Blue light flash once every 7 seconds
Blue light flash 3 times
- 11 -
3. Red LED indicator will be ON when charging is in progress. 4. When charging is finished, the LED indicator will turn blue.
Normally it takes 2 hours to fully charge the battery from empty. We recommend charge the headset at least once every month -2-
In pairing mode / Searching Paired and working
Blue and red light flashing alternatively
Charging
Red light is on constantly
Fully charged Battery low
Blue light is on constantly
Blue light flash once every 7 seconds
Red light flash once every 20 seconds with a warning tone
Basic phone call actions Action
Headset Control
Answer a call Press the multi-function button once End a call Press the multi-function button once Press the volume + or – Adjust the button volume During a call, double press Mute / resume a call the multi-function button Redial last Double press the number multi-function button Reject an Press and hold the incoming call multi-function button for 3 seconds Call waiting Press the multi-function button to answer the second call and put the first call on hold Call switching Press the multi-function button twice Power ON Slide the power button to ON position Power OFF Slide the power button to OFF position
- 12 -
-3-
Voice Notification When performing some specific actions, the headset will give voice notification as following: Action
Voice notification
Note: for your own health, please
Incoming call Announcing incoming call number Power on Hello Power off
Goodbye
Pairing
Pairing
Successfully paired Bluetooth disconnected Outside Bluetooth range Battery level low Mute call
Connected
do not listen to music on max volume for extended period of time. We
Battery low Mute on
Resume call Mute off
Once you have established Bluetooth connection with smart phone or other stereo music device, use the music player feature to listen to stereo music. Adjust the volume with the volume - 13 -
-5-
Input power
5 V (via Micro-USB port)
Battery type
Rechargeable Li-Polymer (80 mAh) Smartphone, iPad, tablets, laptops, PC (with Bluetooth connectivity), Bluetooth music player, Bluetooth transmitter 201230166945.2
Compatible device
Patent number Model Number
J02
break every 30 minutes to
1 year parts and labor warranty. If the headset becomes defective due to manufacture fault, we will fix it or replace it free of charge. However, customer is liable for the shipping cost past 3 months from original purchase date. We do not cover damage caused by the following:
Specifications Bluetooth Version Bluetooth Profile Frequency Range
Streaming music
2. Then twist the headset upwards so it points directly at your mouth.
Warranty
Disconnected Out of range
1. Place the headset into your ear, pointing straight down.
recommend take 1 short protect your hearing ability.
Charging time Talking time
4.0 A2DP, HFP (1.6), HSP (1.2) 2.4 GHz Up to 33 feet / 10 meters (in open space) 2 hours Up to 5 hours
Standby time Up to 140 hours Size
2.20 x 0.75 x 0.35 inch
Weight
0.02 lbs
Working Temp 32°F – 104°F(0°C to 40°C) - 14 -
In order to pair the Bluetooth headset with your smartphone or any other device, you will need to bring it to pairing mode first. Please follow the following steps:
2. Press and hold the multifunction button for 5 seconds or until you see the LED indicator flashing in
-4-
button on the side. Press the function button once to pause, and press it again to resume.Press and hold the volume button to change to previous track or next track.
Pairing
1. Turn on the headset by sliding the power button.
Wearing the headset
2 x ear hook 3 x earbud tip
-1-
Website: www.taotronics.com
The J02 headset comes with 2 ear hook and 3 earbud tips. These accessories are interchangeable to best fit your wearing style.
V4.0 oth Blueto --- 80mA 3.7v in China Made
• Music control options with A2DP
• The Bluetooth headset should appear as an available device under the name “J02”. • Click on connect and enter PIN “0000” if required.
2. Plug the USB end of the charging cable to any USB charger or USB port from your computer.
1 x USB charging cable
• Easy to use with convenient controls
• Go to Setting -> Bluetooth Setting -> Search Bluetooth Device.
Assemble the headset
1 x micro-USB headphone extension
3. You should feel the headset fitting securely in your ear.
Note: You cannot use the headset while it is charging
1. Plug the micro-USB end of the charging cable into the headset.
1 x J02 Bluetooth Headset
• Works with music players, smart phones, tablets, etc.
Model number:J02
The J02 Bluetooth headset is partially charged at the factory. Please make sure that you fully charge it before using it for the first time. To charge the unit:
We recommend charge the headset at least once every month even when the battery is not fully empty.
• any abusive use and destruction • normal ware and aging • over exposure to chemical, heat, moisture, fire, and radioactive substance • natural disaster This warranty does not apply to any second hand purchased headset. - 15 -
red and blue alternatively.
discover the Bluetooth headset (J02) listed as available device for connection. Please follow the instruction of your smart phone or tablet to connect to the Bluetooth headset. If your device is asking for a password, please enter “0000”. If you are using a Bluetooth transmitter or other device without screen, please follow the instructions of your device to bring it to pairing mode. Once the two devices are in pairing mode, they should connect automatically. Please make sure to bring both devices next to each other or within 3 feet when pairing. Note: Please make sure to keep the device away from other Bluetooth or radio transmitting device during pairing stage, as interference may cause pairing failure.
3. Once the LED indicator is flashing in red and blue, the headset is now in pairing mode. If you are using a smartphone or tablet, you should now be able to -6-
FAQ / Trouble shooting Q: The connection is not stable and cuts out intermittently. A: While the range of Bluetooth is 33 feet (10 meters), the optimal range for Bluetooth stereo transmission is 5 – 10 feet (or 3 meters). Bluetooth signal is prone to loss caused by impenetrable objects like walls and ceilings. Additionally, other radio transmitting device in the area can also interfere with Bluetooth transmission. Please make sure there are no objects between the headset and your Bluetooth device, as well as check out any other radio transmitting device within range. Q: I have turned the Bluetooth headset on, but it is not connecting to my smartphone / music player. A: In order for both devices to connect, you will need to bring both to pairing mode. Simply - 16 -
Pairing to two smartphones The Bluetooth headset is capable of simultaneously connect to two smartphones. To do this: • Follow the instructions in the “Pairing” section to connect the Bluetooth headset to smartphone 1. • Once connection is successfully established, disable the Bluetooth function on smartphone 1, and turn off the Bluetooth headset. • Follow the instructions in the “Pairing” section to connect the Bluetooth headset to smartphone 2. • Once connection between smartphone 2 and the Bluetooth headset is established, go back to smartphone 1, and turn on the Bluetooth function on smartphone 1.
Q: I have established connection with my smartphone / music player, but I am not hearing any sound. A: Please make sure that you turn up the volume of both devices. Some smartphone requires you to setup the Bluetooth headset as an audio output device before sound is transmitted. Please see the instruction of your smartphone for details. If you are using a music player or other Bluetooth device, please make sure it supports A2DP stereo music profile. Q: I cannot hear the headset very clearly. A: Please adjust the volume on your phone and headset. Make sure there is no source of interference nearby. Stay - 17 -
You can now make / answer phone calls from both smartphones. Note: You can also pair two Bluetooth devices with the headset at the same time.
Connection priority When connected to two smartphones simultaneously, the last phone used for call /answer calls will have higher priority. For example, an incoming call is answered with smartphone 1. During the call, a second call is coming to smartphone 2. Press the multi-function button once will answer call 2 with smartphone 2. But call 1 on smartphone 1 is still on. When call 2 is ended (by operation from smartphone 2), the headset will return to call 1 on smartphone 1.
both into pairing mode for them to pair again. Simply turn on both device, and they should automatically connect with each other. For some smartphones, you may have to select the Bluetooth headset from the list of available devices, and tab to connect.
Pairing with PC Before connecting to your PC, please make sure that: • Your PC has Bluetooth function, or have Bluetooth dongle installed and working. • Download and install the latest Bluetooth driver for your operation system. To connect the Bluetooth headset with your PC:
Reconnecting
• Turn on the Bluetooth headset by sliding the power button (Blue light flash 3 times when turned on).
You have now maintained an active connection with 2 smartphones at
Once you have successfully paired the headset with a Bluetooth device, you no longer need to bring
• Press and hold the function button until you see the LED indicator flashing in red and blue.
-8-
-9-
- 10 -
• The Bluetooth headset (J02) should appear in the connection list, simply tab it to connect if it doesn’ t connect automatically.
-7-
turn on any device is not going to make them connect. Please follow the instruction in the “pairing” section.
the same time.
close to your smartphone / music player. Q: The other person cannot hear my call clearly. A: Make sure your phone is not connected to another Bluetooth device. Bring your smartphone closer to you and reposition the headset. Q: Where can I get more technical support? A: Please email us at
[email protected]. Make sure you include your purchase order ID for reference purpose.
Do not use liquid or sprays. • To clean the tip: Gently pull out the tip from the earpiece. Wash and rinse with water only. Make sure it is completely dry before re-attaching to the earpiece. • To clean the wire mesh on the earpiece: Gently pull out the tip. Lightly brush the mesh with a soft, dry cloth. Avoid pressing on the mesh.
Customer Support Contact For additional assistance or warranty cover claim, please contact us: E-mail:
[email protected]
Maintenance • Battery care: make sure you turn off the headset when it is not in use. If you have not used the headset for more than 1 month, please make sure you fully charge it before use.
(all enquires) Phone: 1-888-456-8468 # 4 (9:00 am – 6:00 pm PST, Monday to Friday)
Trademark and license agreement Bluetooth® The Bluetooth word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such trademark for this product is under license. Other trademark and trade names are those of their respective owners. QCY® QCY® and its logo are registered and owned by QCY Inc. QCY® has agreed to grant TaoTronics Inc, and Sunvalleytek Inc. sole distribution rights for its “Jack” J02 Bluetooth headset in North America. Other distributors are prohibited from operating retail, wholesale, and any commercial activities in North America for QCY® “Jack” J02 Bluetooth headset.
• Cleaning: use a soft, dry cloth the wipe the surface carefully. - 18 -
- 19 -
- 20 -
