Transcript
5-491 459 UK 18.07.02
KURTZ DESIGN
7680
7680
+
Type 5491
Syncro System Smart Logic
5491391_7680_Korea_S 1 Seite 1 Montag, 11. November 2002 2:38 14
5493464-7630_Korea_S 2 Seite 1 Montag, 11. November 2002 2:40 14
Internet: www.braun.com
5-491-391/00/XI-02/G2 KOR/GB Printed in Germany
7680+C&C-NA Seite 3 KURTZ DESIGN 5491391_7680_Korea_S 3 Seite 1 Montag, 11. November 2002 2:41 14
Syncro 7680
Clean &Charge
A
B
1
13 14
2 3
No. 7000
4 5
15 16 17 18
4
12
6
7 8 9 10 19 11
2
1 0
7570
5491391_7680_Korea Seite 4 Montag, 11. November 2002 2:42 14
+35°C +15°C
4
5491391_7680_Korea Seite 5 Montag, 11. November 2002 2:42 14
*
7680
*
5
3
automa tic lock
2
1
2
1
2
1
5491391_7680_Korea Seite 6 Montag, 11. November 2002 2:42 14
6
1 0
1 0
5491391_7680_Korea Seite 7 Montag, 11. November 2002 2:42 14
oil
Syncro
7000 7000
7
1
7XXX
5491391_7680_Korea Seite 8 Montag, 11. November 2002 2:42 14
2
3
4
5
6
8
5491391_7680_Korea Seite 9 Montag, 11. November 2002 2:42 14
9
7680
5491391_7680_Korea Seite 10 Montag, 11. November 2002 2:42 14
2
1
new
old new
7680 3
automa ti
2
ck c lo
1 0
7680 3
on
2
lock automa tic
1 0
10
/off
cle ch
an
arge
ca rtr idge
5491391_7680_Korea Seite 11 Montag, 11. November 2002 2:42 14
sele cle cha ca
rtri
ct
an
rge
dg
e
11
5491391_7680_Korea Seite 12 Montag, 11. November 2002 2:42 14
12
5491391_7680_Korea Seite 13 Montag, 11. November 2002 2:42 14
English
A Shaver Our products are designed to meet the highest standards of quality, functionality and design. We hope you enjoy your new Braun shaver. Your Braun Syncro is supplied with a Braun Clean&Charge (please see section B). SmartLogic Inside The «SmartLogic» electronics inside your shaver analyzes your personal shaving patterns and the type of beard you have, and then adapts the battery care and cleaning cycles to ensure optimal performance. Warning Your shaver is provided with a low voltage adaptation system. Therefore you must not exchange or manipulate any part of it. Otherwise there is risk of electric shock. Technical specifications: • Wattage via low voltage cord: 7 W • Power supply via mains adapter, input voltage: 100-240 V 2/50 or 60 Hz (automatic adaptation) • Shaver input voltage: 12 V
Description 1 2 3 4 5 6
Foil protection cap Shaver foil Cutter block Foil release button Long hair trimmer Switch
7 8 9 10 11
Display Info key Pilot light Shaver socket Power supply cord set
1 0 2
• First charging: Using the power supply cord set, connect the shaver to the mains with the switch in position «0» and charge it for at least 4 hours (plug might get warm). From now on, the SmartLogic inside your shaver will ensure optimal care of the battery. • A full charge will give up to 50 minutes of cordless shaving time depending on your beard growth. However, the maximum battery capacity will only be reached after several charging/discharging cycles.
7570
Charging the shaver
+35°C +15°C
• Best environmental temperature range for charging is 15 °C to 35 °C.
13
5491391_7680_Korea Seite 14 Montag, 11. November 2002 2:42 14
Display The pilot light shows that the shaver is connected to the mains. The display shows the operation mode and charging status of the shaver: During charging, the display shows the battery capacity symbol increasing by 20% segments and the charging time remaining (flashing): First charging (4 h): The display counts down in 20 min. steps. Subsequent chargings (1 h): The display counts down in 5 min. steps. The battery is fully charged. Below 10 minutes remaining shaving time, the display shows the minutes left. The «moving» plug symbol indicates that you should charge your shaver. If there is insufficient battery charge for a cordless shave, either recharge the shaver or shave via the low voltage adapter connected to the mains.
*
*
*
The display changes to this format when the shaver is in the Clean&Charge. The SmartLogic inside your shaver automatically monitors the condition of the batteries as well as the charging/ discharging processes and adapts them to your personal shaving patterns. For instance, if it is your routine to never let the batteries run low, the SmartLogic will recognize this, look for a pause when you are likely to not use the shaver and completely discharge and then recharge your shaver to recondition the batteries (every six months at the most, and only when necessary).
7680
For additional information, press the info key: press once: –to display the duration of the last shave press again: –to display the key part number for shaver foil and cutter block hold for 3 secs: –to run a display demo 14
5491391_7680_Korea Seite 15 Montag, 11. November 2002 2:42 14
The SmartLogic inside your shaver will detect when the shaver needs to be cleaned (refer to paragraph «Manual cleaning» or to separate «Clean&Charge» use instructions). To reset the display, push the info key. The SmartLogic inside will recognize when the shaver has to be lubricated (refer to paragraph «Manual cleaning» or to separate «Clean&Charge» use instructions). To reset the display, push the info key. The shaver cannot be charged if the environmental temperature is too low (<0 °C) or too high (>55 °C). Allow the shaver to remain for some time at room temperature for optimal charging conditions. No display: The rechargeable battery is completely discharged and has to be recharged.
2 1 2 1
automa tic lock
3
Shaving with the cord If the rechargeable battery is discharged, you may also shave with the shaver connected to the mains via the power supply cord set. (If the shaver does not run immediately, charge it with the switch on position «0» for approx. 1 minute.)
2
Switch positions 0 = Off (switch is locked) Press and push up the switch to operate the shaver: 1 = Shaving with the pivoting head The pivoting cutting system automatically adjusts to every contour of your face. 2 = Shaving with the pivoting head locked at an angle (to permit shaving in difficult areas, e.g. under the nose) 3 = The long hair trimmer is activated (for trimming sideburns, moustache and beard).
1
Shaving
Tips for the perfect shave • We recommend that you shave before washing, as the skin tends to be slightly swollen after washing. • Hold the shaver at right angles (90°) to the skin. • Stretch your skin and shave against the direction of beard growth. • Replace the shaver foil and cutter block every 11/2 years, or when the parts are worn, to ensure optimum shaving performance.
15
5491391_7680_Korea Seite 16 Montag, 11. November 2002 2:42 14
Keeping your shaver in top shape Automated cleaning The Braun Clean&Charge takes care of all cleaning and lubrication needs of your shaver. Please refer to section B.
1 0
1 0
Manual cleaning For easy cleaning after each shave, switch the shaver off. Press the release buttons to lift the shaver foil (do not remove the foil completely). Switch on the shaver for approx. 5-10 seconds so that the shaved stubbles can fall out. For a thorough cleaning (weekly), remove the shaver foil and tap it out on a flat surface. Using the brush, clean the cutter block and the inner area of the pivoting head. About every four weeks, clean the cutter block with Braun cleaning agents. If your skin is very dry and you notice a reduced operation time of the shaver or if the display shows «oil!», apply a drop of light machine oil onto the shaver foil.
oil
Replacing the shaving parts The shaver foil and cutter block are precision parts that, in time, are subject to wear. Replace your foil and cutter block every 18 months and get a 25% better shave.* (Shaver foil and cutter block: part No. 7000) (* Overall evaluation from Braun users comparing their shave with new parts and those used for 18 months.)
Syncro
Accessories 7000 7000
16
available at your dealer or Braun Service Centres: • Shaver foil and cutter block(part No. 7000)
5491391_7680_Korea Seite 17 Montag, 11. November 2002 2:42 14
This appliance is provided with nickel-hydride rechargeable batteries. To protect the environment, do not dispose of the appliance in the household waste at the end of its useful life. Open the housing as shown, remove and dispose of the batteries at your retail store or at appropriate collection sites according to national or local regulations. Subject to change without notice. This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC and to the Low Voltage Regulation (73/23 EEC).
1
7XXX
Environmental notice 2
3
4
5
6
17
5491391_7680_Korea Seite 18 Montag, 11. November 2002 2:42 14
B Clean&Charge Braun Clean&Charge has been developed for cleaning, charging and storing your shaver. Clean your shaver daily in the Clean&Charge. During the automated cleaning process, the shaver is switched on and off at intervals to obtain best cleaning results. Since the specially formulated cleaning fluid contains a small amount of oil, the cleaning procedure also fulfills the lubrication needs of the shaver. Important • Only use the low voltage adaptation system supplied with the shaver. • In order to avoid any leakage of the cleaning fluid, place the appliance on a flat, stable surface or use the wall holder (not included in all versions). Do not tip, move suddenly or transport in any way if a cleaning cartridge is installed. • Do not place the appliance in a mirror cabinet, nor store it over radiators, nor place it on polished or laquered surfaces. Do not expose to direct sunlight. • The appliance contains highly flammable liquid. Keep it away from sources of ignition. No smoking. Keep out of reach of children. Do not refill cartridge. Use only original Braun refill cartridge. • When cleaning the shaver, its protection cap should be removed.
Description 12 13 14 15 16 17
Lift button for cartridge exchange Contact bow Release button Operation mode selector «clean» light: cleaning process indicator «charge» light: charging process indicator 18 «cartridge» light: cartridge replacement indicator 19 Cleaning cartridge Wall holder (not included in all versions) Mount the wall holder with plugs and screws to a smooth wall so that the standing surface for the Clean&Charge is horizontal.
18
5491391_7680_Korea Seite 19 Montag, 11. November 2002 2:42 14
Technical specifications • Power consumption: • 3 W when cleaning • 7 W when charging • Power supply: 100 -240 V 2/ 50 or 60 Hz (automatic adaptation) • Input voltage: 12 V 7680
Before using Clean&Charge Only applies for cordless shavers: For the first charge of the shaver, connect the low voltage supply cord directly to the shaver, charge it for 4 hours and shave at least once. Only then can the shaver be cleaned or recharged in the Clean&Charge. 2
If the rechargeable batteries are discharged, select the combined «clean» + «charge» programme rather than the «clean» programme alone.
1
Installing the cartridge • Press the lift button (12) to open the housing. • Hold the cartridge down on a flat, stable surface (e.g. table). Carefully remove the lid from the cartridge. Slide the cartridge into the base as far as it will go.
new
• Slowly close the housing by pushing it down until it locks. Replacing the cartridge After having pressed the lift button to open the housing, wait for a few seconds before removing the used cartridge. Before discarding the used cartridge, make sure to close the openings using the lid of the new cartridge, since the used cartridge will contain contaminated cleaning solution.
old new
Operating your Clean&Charge 7680 3
automa ti
2
ck c lo
1 0
7680
on
3
/off
cle ch
2
lock automa tic
1 0
• Connect your Clean&Charge with the low voltage supply cord to the mains electricity supply. • Open the contact bow (13) by pressing the release button (14). After shaving, switch the shaver off and place it upside down into the Clean&Charge (without having released the shaver foil). • Select the operation mode by toggling with the mode selector (15): • «clean» (about 15 min) • «clean» + «charge» (about 75 min)
an
arge
ca rtr idge
19
5491391_7680_Korea Seite 20 Montag, 11. November 2002 2:42 14
sele cle cha ca
rtri
ct
an
rge
dg
e
• «charge» (about 60 min) • The corresponding lights will come on. • (With cord shavers, only the «clean» function can be selected.) • Slide down the contact bow to connect the shaver and to start the selected programme. • If no programme is selected, the default function «clean» will be started. • Do not interrupt a running programme, as it leaves the shaver wet and not fit for use. If interruption is needed nonetheless, press the release button. • After a programme has finished, the corresponding light will go out. Prior to the next shave, press the release button to release the shaver. • When the «cartridge» light starts flashing, the remaining fluid in the cartridge is sufficient for about 5 more cleaning cycles. After these 5 cycles, the cleaning performance will be reduced and the cartridge has to be replaced. • When the «cartridge» light illuminates constantly, the cleaning function is locked and a new cartridge has to be installed. Only then, the next cleaning cycle can be started. • A cleaning cartridge should be sufficient for about 30 cleaning cycles. With daily use, the cleaning cartridge should be replaced approx. every 4 weeks. • The hygienic cleaning solution cartridge contains alcohol which, once opened, will naturally evaporate slowly into the surrounding air. Each cartridge, if not used daily, should be replaced after approx. 8 weeks. • Clean the housing from time to time with a damp cloth, especially the opening where the shaver rests. Subject to change without notice.
20
5491391_7680_Korea Seite 21 Montag, 11. November 2002 2:42 14
Guarantee We grant 1 year guarantee on the product commencing on the date of purchase. Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in materials or workmanship, either by repairing or replacing the complete appliance as we may choose. This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor. This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used. To obtain service within the guarantee period, hand in or send the complete appliance with your sales receipt to an authorised Braun Customer Service Centre. For UK only: This guarantee in no way affects your rights under statutory law.
21
