Preview only show first 10 pages with watermark. For full document please download

770-10594e 1

   EMBED


Share

Transcript

SECTION 6: MODELS 630C & 634A PARTS LIST 1 13 3 5* 7† 8 7 7 20 9 14 15 4 2 11 17 1 10 6 18 16 4 19 22 23 24 12 9 7 7 15 21 (A) For Model 630C (B) For Model 634A REF NO. 1 PART NO. 1185469 715-0108 2 710-0597 3 710-0599 4 710-0874 5 710-3008* 6 712-0324 712-04064 7 712-0429 † 712-04063 8 1916707 9 736-0119 10 GW-55013-1 11 GW-55013-2 12 GW-55015 * 4 on Model 634A † 6 on Model 634A REF NO. DESCRIPTION Spirol Pin (B) Spirol Pin (A) Hex Hd. Screw, 1/4-20 x 1 Screw, Self-Tapping,1/4-20 x 1/2 Hex Hd. Screw, 5/16-18 x 1-1/4 Hex Hd. Screw, 5/16-18 x 3/4 Lock Nut, 1/4-20 (B) Flange Lock Nut, 1/4-20 (A) Lock Nut, 5/16-18 (B) Flange Lock Nut, 5/16-18 (A) Support Bracket Lock Washer, 5/16 (B) Hood Bracket, Left Hand Hood Bracket, Right Hand Drag Bar 13 14 15 16 17 18 19 20 21 22 23 24 23 PART NO. GW-55018 686-04041 686-04043 GW-55088 GW-9384 GW-9534 710-04048 786-04191 618-04000 618-04254 1916570 1916771 710-0395 736-0275 DESCRIPTION Depth Regulator Lever Tine Hood Assembly (B) Tine Hood Assembly (A) Bushing Spring, Depth Regulator Spacer Hex Hd. Flange Screw, 5/16-18 x 1 Trail Shield Stop Bracket Transmission Assembly (B) Transmission Assembly (A) Reverse Stop Arm (A) Split Spacer,.462 x.328 x 1.63 (A) Screw, 5/16-18 x 2.25 (A) Flat Washer,.344 x.688 x.065 (A) MODELS 630C & 634A 2 5 15 5 3 16 12 10 21 1 20 13 17 22 11 8 4 7 18 25 9 6 7 18 14 23 24 MODELS 630C & 634A REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 21 22 23 25 PART NO. 1916719 1916755 747-04210 1918745 710-0599 710-3008 712-3009 786-04188 GW-55043 786-04200 GW-55044 GW-9855 725-0157 736-3050 786-04040 732-04185 710-0106 710-0216 710-0805 712-0121 712-0291 712-3000 736-0119 DESCRIPTION Cable Assembly, Reverse Clutch (B) Upper Handlebar Bail, Forward Clutch Cable Assembly, Forward Clutch Screw, Self-Tapping,1/4-20 x 1/2 Screw, Hex, 5/16-18 x 3/4 Hex Lock Nut, 5/16-18 Handlebar Support Lower Handlebar Panel Tab, Conduit Mount Screw, #10-24 x 2 Cable Tie Flat Washer, 3/8 Bracket, Reverse Clutch Cable (B) Spring, Forward Clutch Hex Hd. Screw, 1/4-20 x 1-1/4 Screw, Hex, 3/8-16 x 3/4 Screw, Hex, 5/16-18 x 1-1/2 Hex Nut, #10-24 Hex Lock Nut, 1/4-20 Hex Nut, 3/8-16 Lock Washer, 5/16 1 REF NO. 1 2 3 4 PART NO. 749-04193 710-0395 712-04063 726-0201 3 4 DESCRIPTION Bumper (B) Hex Screw, 5/16-18 x 2-1/4 (B) Nut, Flange Lock, 5/16-18 (B) Speed Nut (B) 2 (A) For Model 630C (B) For Model 634A 25 MODELS 630C & 634A 1 2 5 3 4 6 REF NO. 1 2 3 4 5 6 — (A) For Model 630C (B) For Model 634A PART NO. GW-9517 GW-9400 GW-50043 711-04109 711-04110 GW-9401 GW-1224-1* GW-1224-2* GW-1224-3* GW-1224-4* GW-1325C DESCRIPTION Snap Ring Drive Shaft Bearing Cup Support Washer, Rear Drive Shaft (B) Drive Shaft (A) Drive Shaft Bearing Cone Shim, Rear Bearing Cap,.010" thick Shim, same as above, except.030" thick Shim, same as above, except.005" thick Shim, same as above, except.062" thick Shim Set (Incl. the following shims: two #1224-1, two 1224-2 & one #1224-4) * Use as required to obtain between.005” and.015” allowable end-play. 26 MODELS 630C & 634A 8 1 2 6 3 4 7 FRONT 11 5 10 9 3 2 7 4 REF NO. 1 2 3 4 5 6 7 8 9 10 11 (A) For Model 630C (B) For Model 634A PART NO. GW-9512 1909950 GW-1166-1* GW-1166-2* GW-1166-3* GW-1166-4* GW-1166-5* GW-1086 711-04092 711-04088 GW-9305 GW-1132-2 1904278 711-04078 GW-1104 1904279 1916542 DESCRIPTION Retainer, Snap Ring, “E” Type Retainer, Snap Ring Shim, 0.062" thick Shim, 0.030" thick Shim, 0.015" thick Shim, 0.010" thick Shim, 0.005" thick Bronze Bushing Wheel Shaft (B) Wheel Shaft (A) Key, Hi-Pro, 1/4 x 1 Spacer Worm Gear, Wheel Shaft Tiller Shaft Woodruff Key Worm Gear, Tiller Shaft (B) Worm Gear, Tiller Shaft (A) * Use as required to obtain between.005” and.030” allowable end-play. 27 MODELS 630C & 634A 1 2 5 2 6 4 6 7 8 8 9 11* 10 12 13 3 10 14 * Included with transmission when purchased as an assembly only. Remove and discard when installing the transmission on tiller. REF NO. 1 2 3 4 5 6 7 PART NO. GW-9727 710-04049 736-0119 1918377 1916641 GW-50032 721-04030 REF NO. DESCRIPTION Plug, Transmission Oil Fill Hex Hd. Flange Screw, 5/16-18 x 5/8,Gr. 5 Lock Washer, 5/16 Rear Cover, Transmission Front Cover, Transmission Gasket, Housing Cover Oil Seal, Drive Shaft 8 9 10 11 12 13 14 28 PART NO. 721-04031 619-04013 721-04036 736-3008* 718-04008 710-04048 710-3008 DESCRIPTION Oil Seal, Wheel Shaft Transmission Housing Assembly Oil Seal, Tine Shaft Washer, Flat,.344 x.750 x.120 Rear Bearing Cap Hex Hd. Flange Screw, 5/16-18 x 1 Hex Hd. Flange Screw, 5/16-18 x 3/4 MODELS 630C & 634A Hold Tines With Blunt End Toward You 7 9 10 FRONT RIGHT-HAND TINE LEFT-HAND TINE NOTE: Identify Left and Right sides of tiller by standing in operator position and facing direction of forward travel. 9 2 1 3 WHEEL SHAFT 11 (A) 3 (B) 7, 8 2 10 4 11 (A) 3 (B) 2 5 TINE SHAFT 6 4 3 (A) For Model 630C (B) For Model 634A 1 5 REF NO. 1 2 3 4 5 6 7 PART NO. 710-0514 GW-50049-02 712-3000 710-0347 GW-50049-01 1916747 1915075 1917487 REF NO. DESCRIPTION Hex Hd. Screw, 3/8-16 x 1, Grade 5 Single Bolo Tine - Left Hand (A) (B) Hex Lock Nut, 3/8-16 Hex Hd. Screw, 3/8-16 x 1-3/4 Single Bolo Tine - Right Hand (A) (B) Tine Holder (B) Tine Holder (A) Wheel & Tire Ass’y — Left/Right Side (B) 8 9 10 11 — 29 PART NO. 734-04162 734-04161 GW-9380 GW-9338 712-04065 GW-1901 DESCRIPTION Wheel & Tire Ass’y — Left Side Only (A) Wheel & Tire Ass’y — Right Side Only (A) Clevis Pin,.312" x 1-3/4" Hair Pin Cotter Flange Lock Nut, 3/8-16 (A) Bolo Tine Replacement Set (Incl. eight right-hand tines, eight left-hand tines and required hardware. (A) (B) MODELS 630C & 634A REVERSE CLUTCH CABLE 9 15 30 28 28 32 20 24 3 25 17 41 5 44 2 31 11 1 23 36 8 29(B) 28(A) 21 16 19 16 37 7 39 10 28 (B) 1 (B) 43 (A) 19 (B) 40 (A) 38 33 14 18 4 34 FORWARD CLUTCH CABLE 35 28 42 13 24 27 12 26 29(A) 28(B) 1 38 (B) 45 (A) 22 22 6 24 30 MODELS 630C & 634A REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 (A) For Model 630C (B) For Model 634A 33 34 35 36 37 38 39 40 41 42 43 44 45 PART NO. 736-0159 714-0139 1916531 1916532 656-04023 1916535 1916652 1916657 1916658 1916660 1916724 1916725 1916726 1916794 1916795 1917326 1917746 1918731 1918744 710-0117 710-0237 710-0376 710-04049 710-0520 710-0599 710-3103 712-3000 712-3009 736-0119 736-3050 736-3090 710-0151 GW-1138-2 736-0315 GW-50027 GW-55034 GW-55049 GW-9090 GW-9301 736-3078 GW-9944 710-0672 710-0805 712-3010 736-0242 736-0452 750-0258 DESCRIPTION Flat Washer, 5/16 (B) Key, 3/16" x 2" Pulley, Engine Drive Transmission Pulley (B) Transmission Pulley (A) Pulley, Reverse Idler (B) Guard, Belts/Pulleys Forward Drive Belt Reverse Drive Belt (B) Belt Cover Reverse Return Spring (B) Reverse Belt Guide (B) Forward Belt Guide Engine Bracket, Left Engine Bracket, Right Bracket, Belt Cover Shoulder Washer Reverse Idler Arm (B) Forward Idler Lever Hex Hd. Screw, 5/16-24 x 1 Hex Hd. Screw, 5/16-24 x 5/8 Hex Hd. Screw, 5/16-18 x 1 Hex Hd. Screw, 5/16-18 x 5/8 Hex Hd. Screw, 3/8-16 x 1-1/2 Screw, Self-Tapping, 1/4-20 x 1/2 Hex Hd. Screw, 5/16-18 x 2 (B) Lock Nut, 3/8-16 Lock Nut, 5/16-18 (B) Lock Washer, 5/16 Flat Washer, 3/8 Flat Washer Hex Hd. Screw, 3/8-24 x 2.00 Shim (B) Flat Washer,.75 x 1.5 x.125 (A) Support Washer Forward Return Spring Bracket, Cable Mounting Forward Idler Pulley Key, 3/16" x 1" Flat Washer Belleville Washer Hex Hd. Screw, 5/16-24 x 1.25 (A) Hex Hd. Screw, 5/16-18 x 1-1/2 (A) Hex Nut, 5/16-18 (A) Bell Washer,.340 x.872 x.060 (A) Bell Washer,.396 x 1.140 x.095 Spacer,.315 x.750 x 375 Lg (A) 31