770-10597c_1

Transcript

28 Parts List Models 664D, 665B & E666M HANDLEBAR ASSEMBLY and CONTROL LEVERS 10 Parts List 29 Models 664D, 665B & E666M HANDLEBAR ASSEMBLY and CONTROL LEVERS REF. No. 1 2 3 3A 4 5 5A 6 7 8 9 10 13 14 PART No. 1918801 GW-9126 777I22088 777D05553 1916784 1186347 GW-9955 1900475 710-0514 736-3050 712-3000 746-04027 GW-9442 GW-9057 DESCRIPTION Handlebars .......................................... Grip ..................................................... Decal, Control Panel ........................... Decal, Model Name/Logo .................... Reverse Clutch Control Cable .............. Height Adjustment Screw ................... Washer, Keyed..................................... Bracket, Handlebar Height Adjustment Hex Hd. Screw, 3/8-16 x 1*................. Washer, Plain (flat) 3/8, S.A.E. ............ Hex Locknut, 3/8-16 ............................ Cable, Forward Clutch Control ............. Wheel Gear Control and Cable Assy..... Knob, Wheel Gear Control Lever.......... * Specify GRADE 5 if ordering part locally. QTY. 1 2 1 1 1 1 1 1 2 2 2 1 1 1 REF. No. 15 16 17 19 21 22 23 24 25 35 36 42 PART No. 1186211 GW-90064 736-0169 725-0157 1114748 1100240 1186208 GW-9390 1918802 GW-9853 GW-20806 710-0599 DESCRIPTION Hex Nut, 5/16-24 ................................. Hex Hd. Screw, 3/8-16 x 5/8*.............. Lockwasher, 3/8 .................................. Cable Ties, Plastic................................ Round Hd. Screw, #10-32 x 1/2 .......... Lockwasher, #10 ................................. Hex Nut, #10-32 .................................. Grip ..................................................... Bail, Forward Clutch Control ................ Sems Nut............................................. Bracket, Bail Support ........................... Hex Flange Screw, self-tapping, 1/4-20 x 1/2* ................................... QTY. 2 2 2 2 6 2 2 2 1 4 2 2 30 Parts List Models 664D, 665B & E666M ENGINE, SUPPORT BRACKETS, PULLEYS, BELTS, BELT COVER 36 5 6 Reverse Clutch Cable 7 2 7 3 4 9 10 8,43 11,32 13 35 14 16 15 1 16 17 20,45 52 35 39 40 20 42 46 18 48 21 45 20 43 44 49 50 51 43 12 38 53 8 22 (Screw, Ref. 47, secures Forward Clutch Cable – page 28, Ref. 10) 44 11 47 37 54 24 25 41 31 23 26 27 30 3 28 29 Parts List 31 Models 664D, 665B & E666M ENGINE, SUPPORT BRACKETS, PULLEYS, BELTS, BELT COVER REF. No. PART No. 1 710-0539 GW-9572 1917326 736-0119 710-0107 777S30651 1916659 712-3004A 1108841 GW-1138-1 619-04015 191652 GW-9944 GW-9572 710-3103 1918731 1916535 736-0159 1916725 710-0117 1917746 736-3078 1916728 1916522 GW-1440 1918812 1909404 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 DESCRIPTION Screw, 3/8-24 x 1.75 (A) .................... Screw, 5/16-24 x 1.125 (B)................. Bracket, Clutch Cable .......................... Lockwasher–5/16................................ Hex Hd. Screw, 5/16-24 x 1/2 ............. Decal, Hot Surfaces/Belt Warning ....... Cover .................................................. Flange Lock Nut, 5/16-18.................... Key, 3/16 x 1-1/2 (B)........................... Shim ................................................... Pulley, Engine Drive (A) ...................... Pulley, Engine Drive (B) ...................... Belleville Washer (B) ........................... Hex Hd. Screw, 5/16–24 x 1-1/8 ......... Hex Hd. Screw, 5/16–18 x 2 ............... Reverse Idler Arm ............................... Pulley, Reverse Idler ........................... Flat Washer, 5/16 ................................ Belt Guide, Wire Formed .................... Hex Head Screw, 5/16-24 x 1.............. Washer, Shoulder ............................... Washer, Flat, 1-1/8 (B)........................ Spring, Reverse Return....................... Transmission Pulley............................ Support Washer .................................. Reverse Clutch Belt ............................. Forward Clutch Belt............................. QTY. 1 1 1 6 2 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 3 1 1 1 1 1 (A) For Models 664D & E666M (B) For Model 665B * Specify GRADE 5 if ordering part locally. ** See your local authorized engine service dealer for engine parts or service. Refer to engine nameplate for engine type and code information. REF. No. 26 27 28 29 30 31 32 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 PART No. 1900396 GW-20339 712-4063 1186329 1916797 1916796 736-0452 710-0395 777I20942 1918774 710-1260 710-0805 736-0275 1918846 GW-55088 714-04029 712-3010 1917746 1918744 1767754 1916727 712-3000 GW-9090 710-0347 712-0158 1754128 736-0463 DESCRIPTION Self-tapping Screw, #10-32 x 1/2, ...... Guard, Belts/Pulleys............................ Hex Flange Nut, 5/16–18..................... Hex Flange Screw, 5/16-18 x 3/4* ...... Engine Support Bracket, left side ........ Engine Support Bracket, right side...... Bell Washer (A) ................................... Hex Hd. Screw, 5/16–18 x 2-1/4 ......... Decal, Stabilization.............................. Mounting Bar ...................................... Hex Flange Screw, 5/16-18 x .75 ........ Hex Hd. Screw, 5/16-18 x 1-1/2*........ Flat Washer, 5/16' ............................... Belt Guide, Pony ................................. Pivot Bushing...................................... Key, .188 x 1.75 (A) ............................ Hex Nut, 5/16-18................................. Washer, Shoulder (A) ......................... Idler Arm, Forward Tiller Direction ...... Screw, self tapping, #10-24 ................ Spring ................................................. Hex Locknut, 5/16-18 ......................... Idler Pulley, Forward .......................... Screw, 3/8-16 x 1-3/4 ......................... Hex Lock Nut, 5/16-18 ........................ Screw, 1/4-20 x 3/4 ............................ Flat Washer–1/4 .................................. QTY. 4 1 4 4 1 1 1 5 1 2 4 1 1 2 2 1 2 2 1 1 1 1 1 1 1 1 1 32 Parts List Models 664D, 665B & E666M TRANSMISSION HOUSING, COVERS, SEALS, GASKETS, PLUGS NOTE 1: These screws are a special sealing screw that cannot be reused without risking the loss of transmission oil. If these screws are loosened or removed, they must be replaced with new screws. REF. No. 1 2 3 4 5 6 7 8 9 10 PART No. 721-04031 1105620 721-04001 710-04043 721-04044 GW-20910 GW-20694 619-04010 GW-9467 GW-20889 DESCRIPTION Oil Seal (Double Lip), Wheel Shaft ...... Pipe Plug, 1/4, ................................... Seal, Transmission Bore ..................... Hex Flange Screw, 5/16-18 x 3/4* ...... Oil Seal, Input Pinion Shaft ................. Transmission Cover ............................ Gasket, Transmission Top Cover ........ Transmission Case Assy. .................... Plug .................................................... Mounting Plate, Wheel Clutch Cable ... * Specify GRADE 5 if ordering part locally. A/R – As Required QTY. 2 2 1 6 1 1 1 1 1 1 REF. No. 11 12 13 15 16 17 18 19 21 22 PART No. 721-04035 710-04049 GW-20873 1915069 GW-1115 GW-1124-2 710-1260A 1915068 736-0169 GW-90064 DESCRIPTION QTY. Oil Seal, Tiller Shaft............................. 2 Screw, Hex Flange, 5/16-18 x 5/8”..... 2 Cover, Tiller Housing .......................... 1 Self-Sealing Screw, 1/4-20 x 7/8” ...... 3 Rear Bearing Cap ................................ 1 Gasket, Rear Bearing Cap, .010" A/R Hex Flange Screw, 5/16-18 x 3/4* ...... 4 Self-Sealing Screw, 1/4-20 x 5/8” ...... 5 Lockwasher, 3/8.................................. 2 Hex Hd. Screw, 3/8-16 x 5/8* ............. 2 Parts List 33 Models 664D, 665B & E666M DRIVE SHAFT, INPUT PINION SHAFT and GEAR ASSEMBLIES REF. No. PART No. 1 2 3 4 GW-1714 GW-20718 GW-9301 GW-20912 5 GW-1224-1 5 GW-1224-2 5 GW-1224-3 ... GW-1325C DESCRIPTION QTY. REF. No. MAIN DRIVE SHAFT Bearing, Tapered Roller with Race .... Spur Gear .......................................... Key, 3/16 sq. x 1 ............................... Main Drive Shaft (Drive shaft is onepiece with integral, single-lead, work-hardened front worm, and integral, six-lead, work-hardened rear worm. Also includes pressedon GW-1714 and GW-9301).......... Shim, Rear Bearing Cap, .010" thick (see Note below) ........................... Shim, same as above, but .030" thick (see Note)...................................... Shim, same as above, but .005" thick (see Note)...................................... Shim Set (Incl. two GW-1224-1; two 1224-2 and one GW-1224-3) ........ PART No. DESCRIPTION QTY. INPUT PINION SHAFT & GEAR ASSEMBLY 1 1 1 6 7 GW-9572 GW-9944 A/R 8 9 10 11 12 13 14 15 16 17 18 19 1108841 1916522 GW-1440 721-04044 1113527 GW-9953 GW-9428 GW-9677 GW-20791 GW-20792 GW-9093 GW-20799 A/R 20 GW-9517 1 A/R A/R Hex Hd. Screw, 5/16-24 x 1-1/8* ...... 1 Washer, Disc Spring (concave surface faces pulley)...................... 1 Key, 3/16 sq. x 1-1/2 ......................... 1 Transmission Drive Pulley................. 1 Support Washer ................................ 1 Oil Seal, Input Pinion Shaft................ 1 Retaining Ring (external) .................. 1 Thrust Washer................................... 2 Bushing ............................................. 1 Set Screw, 5/16-18 x 3/8*................. 1 Input Pinion (steel shaft)................... 1 Input Pinion Gear .............................. 1 Retaining Ring (external) l................. 1 Pinion Assy. (Incl. one each Refs. 16, 17 and 18 ...................................... A/R Retaining Ring (internal) .................. 1 NOTE: Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005-.010) end play on drive shaft. A/R - As Required * Specify GRADE 5 if ordering part locally. 34 Parts List Models 664D, 665B & E666M WHEEL SHAFT, ECCENTRIC SHAFT and TILLER SHAFT ASSEMBLIES REF. No. 1 2 3 ------4 5 6 7 8 PART No. 721-04031 1909950 GW-1166-1 GW-1166-2 GW-1166-3 GW-1166-4 GW-1086 711-04091 GW-9373 GW-20914 GW-9935 DESCRIPTION Oil Seal .............................................. Retaining Ring (heavy-duty, external) Shim, 1-1/64 I.D., .062" thick ............ Shim, as above, but .030" thick ......... Shim, as above, but .015" thick ......... Shim, as above, but .010" thick ......... Bushing ............................................. Wheel Shaft....................................... Hi-Pro Key, 1/4 x 1-5/16.................... Wheel Drive Worm Gear (cast-iron) .. Shim (between key and gear), 1.016 I.D. x 1.468 O.D. x .062 Thick.............................................. * Specify GRADE 5 if ordering part locally. A/R - As Required QTY. 2 2 A/R A/R A/R A/R 2 1 1 1 1 REF. No. 9 10 11 12 13 14 15 16 17 18 19 PART No. GW-20712 611-04002 GW-1442 GW-9055 721-04034 786-04001 710-3013 741-3037 711-04080 GW-1104 GW-20913 DESCRIPTION Wheel Drive Clutch (cast-iron) .......... Eccentric Shaft .................................. Pin, Eccentric Shaft ........................... Spring ............................................... Oil Seal .............................................. Eccentric Shaft Lever......................... Hex Hd. Screw, 1/4-20 x 1/2* ........... Ball Bearing ....................................... Tiller Shaft......................................... Woodruff Key, 1/4 x 1-1/4................. Tiller Drive Worm Gear (bronze) ....... QTY. 1 1 1 1 1 1 1 2 1 1 1 Parts List 35 Models 664D, 665B & E666M BOLO TINES, WHEELS NOTE 1: Custom Tilling Tines are available for your tiller. These are special hard-faced tines that are thicker than standard tines. IMPORTANT: Left and right sides of tiller are determined by standing in operator position and facing direction of forward travel. REF. No. PART No. 1 2 710-0514 GW-1270-2 3 5 7 712-3000 710-3096 GW-1270-1 8 -- 1902154 1901118 DESCRIPTION QTY. Hex Hd. Screw, 3/8-16 x 1* ................ 16 Bolo Tine-single. Right hand tine used on left side of tiller.................. 8 Hex Locknut, 3/8-16 ........................... 18 Hex Hd. Screw, 3/8-16 x 2, Grade 8.... 2 Bolo Tine-single. Left hand tine used on right side of tiller ............... 8 Tine Holder. For left and right sides .... 2 Bolo Tine Replacement Set (Incl. eight ea. right hand and left hand tines, and sixteen ea. Refs. 1 and 3) ......... 1 * Specify GRADE 5 if ordering part locally. REF. No. PART No. -- GW-2475-1 -- GW-2475-2 -- GW-10802 9 10 11 GW-9338 1917487 GW-9380 DESCRIPTION Custom Tilling Bolo Tine, Left hand tine (see Note 1 above) ................... Custom Tilling Bolo Tine, Right hand tine (see Note 1 above) ................... Custom Tilling Bolo Tine Replacement Set (Incl. eight ea. right hand and left hand custom tines, and sixteen each of Refs. 1 and 3) ..................... Hitch Pin ............................................. Wheel and Tire Assembly ................... Clevis Pin, .312 x 1-3/4 ...................... QTY. 8 8 1 2 2 2 36 Parts List Models 664D, 665B & E666M BUMPER ATTACHMENT 2 1 5 4 3 BUMPER OEM-290-254 REF No. PART No. 1 2 3 749-04193 777S30653 710-0395 4 736-0119 DESCRIPTION QTY. Bumper – OEM-290-254 Bumper ............................................ Decal - Caution.................................. Screw–hex hd., 5/16-18 x 2-1/4* (included in hardware kit) ........... Lockwasher–5/16* (included in hardware kit) ............. 1 1 4 4 REF No. PART No. 5 712-04063 --- 1918781 DESCRIPTION Lock Nut–Hex, Nylon, 5/16-18* (included in hardware kit) ............. Hardware Kit: Incl. four each of Refs. 3, 4 and 5 ............................. QTY. 4 1 Parts List 37 Models 664D, 665B & E666M HOOD, BRACKET and DEPTH REGULATOR Transmission 618-04002 REF. No. 1 2 3 4 5 6 7 8 9 10 PART No. 686-04013 710-0169 GW-2525 710-04049 712-0291 710-0597 GW-9384 GW-9534 1185469 GW-1117A DESCRIPTION Tine Hood ........................................... Lockwasher, 3/8.................................. Bracket–hood & depth regulator ......... Hex Flange Screw, 5/16-18 x 5/8* ...... Hex Locknut, 1/4-20 ........................... Hex Hd. Screw, 1/4-20 x 1* ................ Spring ................................................. Spacer................................................. Roll Pin (spiral), 1/4 x 1 ..................... Depth Adjustment Bar Assembly (Incl. Refs. 11 and 12) .................... * Specify GRADE 5 if ordering part locally. QTY. 1 2 1 2 1 1 1 1 1 1 REF. No. PART No. 11 12 13 14 15 16 17 18 GW-9120 GW-9119 710-3005 GW-1113-1 712-3017 GW-20775 777S30649 710-0759 19 710-0599 DESCRIPTION Retaining Ring (tolerance ring) ........... Knob, Depth Regulator (Incl. Ref. 11) . Hex Hd. Screw, 3/8-16 x 1-1/4*.......... Bushing, Drag Bar............................... Hex Nut, 3/8-16................................... Drag Bar ............................................. Decal, operating instructions .............. Hex Hd. Screw, self-tapping, 5/16-18 x 5/8* ................................ Hex Flange Screw, self-tapping, 1/4-20 x 1/2* .................................. QTY. 1 1 2 2 2 1 1 2 2 38 Parts List Model E666M Parts List 39 Model E666M ELECTRIC START ASSEMBLY REF. No. PART No. 1 2 3 4 5 1186073 1186211 1186390 1186389 1901202 6 7 1901894 1908118 DESCRIPTION Carriage Screw, 1/4-20 x 1.25........... Hex Nut, 5/16-24............................... Flange Screw, 1/4-20 x .625.............. Hex Locknut, 1/4-20.......................... Cable (ground wire to starter motor bracket)............................... Recharge Wire Assembly .................. Wire Harness Assy. (available as complete assembly only). Incl. wire assy. w/connector to large solenoid stud (red wire); wire assy. w/connector to small solenoid stud (red wire); wire assy. w/connector to solenoid grounding screw (red wire); wire assy w/connector to engine ground shut-off (green wire); plastic protector tube; wire terminal ......... QTY. 2 2 2 2 2 1 1 REF. No. PART No. 8 9 10 11 12 13 14 15 16 17 18 19 20 1917262 686-04024 710-0599 712-3006 725-0157 725-0267 725-1706 736-0119 736-0147 736-0607 GW-2614 96510 96514 21 22 — 97020 9853 777S30648 DESCRIPTION Ground Wire Assy. (shut off) ............ Battery Bracket Assembly, Pony........ Self-tapping Screw, 1/4-20 x .5......... Hex Nut, 1/4-20................................. Cable Tie............................................ Ignition Switch .................................. Battery, 270 CCA ............................... Lock Washer 5/16 ............................. Lock Washer, #10 ............................. External Lock Washer, 5/16............... Keyswitch Clamp............................... Cable (solenoid to starter motor) ...... Solenoid (Incl. nuts and washers for cables and wires) ..................... Boot, Insulating ................................. Hex Locknut, #10-32......................... Label, Ignition Switch........................ QTY. 1 1 3 2 1 1 1 2 1 2 1 1 1 2 1 1