Transcript
Replacement Parts for Pre-Rinse Units 2924-6000 SPRING GOOSENECK
fisher manufacturing company
2914 STAINLESS STEEL HOSE 36”
11355 SPRAY VALVE REPAIR KIT
1000-3301 2949-3001 NOZZLE FOR 2949 SPRAY VALVE
2922-5000 WASHER WATTS N9 BACK-FLOW PREVENTER
1000-5001
2949-9002 BLUE BUMPER
2912-7501
Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products and hardware specialties for the food service industry. For three generations, the Fisher family has adhered to a strict dedication of and overall value. When you install Fisher products… you install the best. Our hardware is manufactured with the standardization of internal mechanisms. All chrome plating is triple plated copper, nickel and chrome for durability. Every piece of equipment we make is rigorously tested in both our modern in-house testing center and in actual field situations under extreme conditions. Every detail is thoroughly checked. Before we make our products available to you, they pass each and every test. You get proven performance. Guaranteed.
2909-6000
Limited One Year Warranty
2912-6000 1000-0001 INCLUDES: 1000-5003 WASHER 1000-7502 SCREW
2932-0002 BACKFLOW PREVENTER
2925-6300 HOSE HOOK
2922-5000
2913 INSULATED HANDLE
2926-3300 PIPE TO HOSE ADAPTER
1000-0003 2949-8600 CUP WASHER
1000-5005 O-RING
2949 ULTRA SPRAY VALVE 2902-12 WALL BRACKET
2927-4303 3/8” PIPE 16” RISER
2909-3400
10014 (24”) 10022 (36”) SUPPLY LINE 1/2” F x 1/2” F 2500-CV CONTROL VALVE
1792 ANGLE STOP WITH KEY
10049 (24”) 10006 (36”) SUPPLY LINE 1/2” M x 1/2” F 1000-7502 SEAT SCREW
2000-7500 SCREW 2000-8000 RED BUTTON AND 2000-8001 BLUE BUTTON
2909-5000
2912-2501
2949-9001 SCRUB BRUSH
3000-0000 RH SWIVEL REPAIR KIT
10456 LUBE
3000-0011 RH SWIVEL STEM
2000-5003 SEAT WASHER
10464 DUCK GASKET
2000-5000 WASHER
1790-1 ANGLE STOP W/ CROSS HANDLES
2000-2301 LEVER HANDLE
2000-3002 BIBB CAP
2000-7500 SCREW
2000-8000 RED BUTTON AND 2000-8001 BLUE BUTTON
2000-2301 LEVER HANDLE 2000-3002 BIBB CAP 10464 DUCK GASKET 2000-5000 WASHER 2000-3406 LH CHECK STEM OR 2000-3407 RH CHECK STEM
2000-0004 RH CHECK STEM REPAIR KIT OR 2000-0005 LH CHECK STEM REPAIR KIT
3967 16” SWING SPOUT 3964 14” SWING SPOUT 3963 12” SWING SPOUT 3962 10” SWING SPOUT 3961 8” SWING SPOUT 3960 6” SWING SPOUT
2000-0001 RETAINER ASSEMBLY 10456 LUBE
PART NO. 41130
2901-0000 ADD-ON CONTROL VALVE LESS SPOUT
#34290 - Pre-Rinse Unit: 4” C/C Deck Mount, Wall Bracket & Add-On Faucet with 6” Swing Spout #34304 - Pre-Rinse Unit: 4” C/C Deck Mount, Wall Bracket & Add-On Faucet with 8” Swing Spout #34312 - Pre-Rinse Unit: 4” C/C Deck Mount, Wall Bracket & Add-On Faucet with 10” Swing Spout #34320 - Pre-Rinse Unit: 4” C/C Deck Mount, Wall Bracket & Add-On Faucet with 12” Swing Spout #34339 - Pre-Rinse Unit: 4” C/C Deck Mount, Wall Bracket & Add-On Faucet with 14” Swing Spout #34347 - Pre-Rinse Unit: 4” C/C Deck Mount, Wall Bracket & Add-On Faucet with 16” Swing Spout
WARNING: Proposition 65 requires that we provide you with the following notice: “This product Contains A Chemical Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm.”
15621 SPOUT NUT
12564 2.2 GPM AERATOR
Fisher Manufacturing Company warrants its products and parts thereof (except as noted below) against defects in materials or workmanship for a period of one year after the date of original purchase. During this period Fisher Manufacturing Company will replace a defective product or part without charge to you, provided that the entire product is delivered to Fisher Manufacturing Company. All transportation and insurance charges for shipping the product to and from Fisher Manufacturing Company must be borne by you. Charges for transportation and insurance may, at the option of Fisher Manufacturing Company, be refunded depending upon our investigation of the warranty claim. This warranty does not cover external finish (except at date of original purchase) or labor costs not specifically authorized by Fisher Manufacturing Company. A full and complete copy of our One Year limited warranty is available upon request.
2002 SNAP RING
2000-6000 SPRING
8” C/C Backsplash Mount Pre-Rinse Unit Product Installation Guide
1600-5000 SPOUT O-RINGS
KEEP THIS MANUAL FOR FUTURE REFERENCE
10456 LUBE
MANFACTURING COMPANY PO BOX 60, TULARE, CA 93275 (800)421-6162, FAX: (800)832-8238 www.fisher-mfg.com
ANSI/A112.18.1M, ANSI/NSF 61.9
19119 SWIVEL SPOUT RETRO-FIT KIT
REV.C
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238 www.fisher-mfg.com
Installation Instructions for Pre-Rinse Units
Installation Instructions Continued
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION REGARDING
Installation Notes: • Be sure to shut off water supply before beginning. • Use pipe thread sealant such as PST on all threaded joints. • Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier. Tools Required for Installation • • • • •
Medium Sized Crescent Wrenches Pipe Thread Sealant Phillips Screwdriver 7/16” Drill Bit 1/8” Allen Wrench
Installation Instructions 1. Mount the small riser to the control valve body using thread sealant. Thread the add-on faucet to the other end of the small riser, again using thread sealant.
8. Fit the other handle gasket inside the inlet of the insulated handle and mount the handle onto the SS hose. If installing backflow preventer, attach it between the SS hose and insulated handle. Be sure that gaskets are used on both sides of the backflow preventer.
5. Slip the hose hook over the pipe to hose adapter. Using thread sealant and a crescent wrench, thread the SS hose into the pipe to hose adapter. 6. Install gooseneck spring by slipping SS hose through the spring. Spring will fit over adapter which holds it in an upright position. Note: Be sure spring is installed as shown. DO NOT INSTALL SHORT BEND DOWN. 7. Fit one of the handle gaskets inside the outlet of the insulated handle and mount the spray valve onto it.
Wall
9. If installing a brush, do so by pressing brush into the bumper of the spray valve until secure.
PST
Wall Screw Set Screw
Pipe Clamp
11. Turn on water supply and check for leaks.
Step 1
Step 5
Thread Sealant Goes Here
Riser Pipe
Step 7
Step 6
Spring Bend On This Side
3. Mount the pipe to hose adapter to the enclosed riser using thread sealant. Mount the other end of the riser to the female outlet of the add-on body.
a. Locate and drill a Ø7/16” hole in the wall directly behind and about 3/4 the way up the riser pipe. b. Loosely attach the front and back of the pipe clamp onto the riser pipe. c. Hold the wall bracket flange against the wall, centered with the hole. Use the wall screws and a screw driver to mount the flange to the wall. d. Slide part, but not all, of the wall bracket rod nonthreaded end first through the center hole of the flange and into the wall. e. Align the rod with the pipe clamp and thread the rod into the pipe clamp. Be sure the rod is level by adjusting the pipe clamp position. f. Once level, fix the rod in place by tightening both the set screw located in the flange and the pipe clamp screws.
Excess Rod Length Trim to Fit (optional)
10. To install swing spout to add-on faucet, apply o-ring lube to the o-rings on the swing spout. Make sure the white snap ring is in place before mounting the swing spout. Mount the swing spout and tighten the swing spout nut onto the add-on faucet spout outlet.
2. Mount control valve on deck by Inserting nipples through pre-drilled 7/8” holes in deck. Apply thread sealant to both nipples and attach slip joint kits. Tighten until control valve is secure.
4. If no wall bracket is to be installed, proceed to Step 5, otherwise do the following:
Step 4
Thread Sealant Goes Here Step 2
Handle Gasket
Thread Sealant Goes Here
Slip Joint Kit
Step 8
Step 9
Step 3
Step 10
Swing Spout
Thread Sealant Goes Here
Optional
Handle Gasket WATTS N9 BACK-FLOW PREVENTER
Apply O-Ring Lube Here
Step 11
