Transcript
8-Channel Digital Optical Video Converter IKSHU series Digital Optical Video Converter product includes 1-channel, 2-channel, 4-channel, 8channel and 16-channel converter. They can transmit video signal, from 1 channel to 16 channels, via 1 fiber cable, real-time, synchronously, non-distortion and high quality. IKSHU series Digital Optical Video Converter adopts the full digital video non-compression transmission technology and it's high quality video effect can meet your strictest requirement. Its optical module and core circuit adopt the imported components which is high stability and suitable to different operation environment. All optical interface and electrical interfaces conform to the international standards. With modularization design, you can flexibly select or customize the configuration according to the locale conditions. And due to unique lightning protection and rack mounting design, IKSHU series Digital Optical Video Converter can save your investment as much as possible.
Key Features
Standalone or Rack mount; Unique lightning protection design; LED Indicators for Instant System Monitoring; Automatic compatible with NTSC, PAL, or SECAM; Miscellaneous customization ability as per your requirement; Asynchronous data transmission speed reach 300Kbps maximally; The asynchronous data support RS232, RS485, RS422, and Manchester Code; Industrial design and modularization design make the equipment reliable and flexible; Support two direction asynchronous data transmission (positive and reverse direction); Advanced self-adaptive technology, and it is unnecessary to implement the adjustment of spot electrics or optics when using.
Texonic Instruments (Chennai) Texonic Instruments (Bangalore) Ph: 044 4211 8608 / 8609 Ph: 080 25036600 / 6682 Email:
[email protected] / www.texonic.com
Dimension（Units:mm）
140 80
190 180
15 5
V1
V2
V3
V4
5V2A
R/T DATA
V5
V6
V7
V8
PWR
OPT
-
+
Technical Parameters
Video Parameters
Input/output impedance Input/output voltage Voltage range DG DP Signal to Noise Ratio (SNR) Connector
Data Parameters
Optical Parameters Operation Parameters
Data format Rate BER Physical interface Wavelength Fiber Typical fiber output power Typical receiving sensitivity Connector Power Supply Operation Humidity range Operating temperature range Storage temperature range
75Ω (imbalance) 1.0Vp-p Type 0.6-2.0Vp-p Type <±1% Type <±1% Type > 60dB (weighting) (8Bit) > 70dB (weighting) (10Bit) BNC RS232, RS422, RS485, Manchester Code, BIPHASE, etc. 0-300kbps 10-9 Standard PHOENIX wire connecting terminal 1310nm&1470nm-1610nm 0/125u MMF, 62.5/125u MMF, 9/125u SMF -8~3dBm -30dBm FC, ST ,SC( optional) 110V~240V AC self-adaptive 0~95% non condensing -10℃~70℃ -40℃~85℃
Texonic Instruments (Chennai) Texonic Instruments (Bangalore) Ph: 044 4211 8608 / 8609 Ph: 080 25036600 / 6682 Email:
[email protected] / www.texonic.com
Description of LED Indicators The front board of video transmitter and receiver is shown as below. there are 10 interfaces and 12 green indicators, and identifier T for video transmitter and R for video receiver.
Interfaces on front board V1
V2
V3
V4
R/T DATA
V5
V6
V7
V8
OPT
PWR
OPT: fiber optic connector DATA : data connector Video: video connector
Indicators on front board Indicator Function: PWER: power on/off F: optical link D: data link V: video link For video transmitter, when powered on, all indicators will light up for two seconds, after that all of them will switch to working state. If optical link is normal, indicator F is on, otherwise off; When video link is normal, indicator V is on, otherwise off; If there is data transmission, light D is twinkling, or lightless. For video receiver, when powered on, all indicators will light up for two seconds, after that all of them will switch to working state. If optical link is normal, indicator F is on, otherwise off; When receiving video from video transmitter, indicator V is twinkling, otherwise off; if there is data transmission, light D is twinkling, otherwise off.
Ordering Information Product 8-Channel Digital Optical Video Converter
Description 8 optical channel and 1 reverse data channel
Unit
Part No.
set
IKSHU-8V1RD
Weight 8-channel digital optical Weight Product Name 8-channel digital optical
Type IKSHU -8V1RD
Weight 1.90kg
Each Net Weight 0.70kg
Texonic Instruments (Chennai) Texonic Instruments (Bangalore) Ph: 044 4211 8608 / 8609 Ph: 080 25036600 / 6682 Email:
[email protected] / www.texonic.com
