Transcript
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88
802.11a/b/g/n Wi-Fi access points
Catalogue number(s): 0 335 21
CONTENTS 1. 2. 3. 4. 5. 6. 7. 8.
x4
Page
General features . . . . . . . . . . . . . . . . . 1 Presentation . . . . . . . . . . . . . . . . . . . . 1 Overall dimensions . . . . . . . . . . . . . . . 1 Connection . . . . . . . . . . . . . . . . . . . . . 1 Mounting . . . . . . . . . . . . . . . . . . . . . . . 1 Technical features . . . . . . . . . . . . . . . . 2 Web interface . . . . . . . . . . . . . . . . . . . 2 Standards and approvals . . . . . . . . . . 2
3. OVERALL DIMENSIONS
1. GENERAL FEATURES Used to extend an existing Wi-Fi network or to create a secure Wi-Fi network with the option of setting up a personalised hotspot. Guaranteed quality of service in accordance with the WMM standard. -- Coverage area: 600 m2 in unobstructed space -- Dual band 2.4 GHz or 5 GHz -- Conforms to the 802.11 a/b/g/n standard -- Theoretical speed: 300 Mbps gross MIMO 3 x 2, supports up to 4 SSIDs simultaneously -- Can be installed in addition to a new or existing LCS2 structured wiring system to meet mobile working requirements -- For integration in false ceiling -- PoE power supply (Power over Ethernet - IEEE 802.3 af standard) -- Tool-free network connection via an RJ 45 connector -- The access point incorporates weekly time programming for switching the terminal on and off The installation must include at least: -- One false ceiling Wi-Fi access point: the product can be used on its own or with Wi-Fi controller Cat. No. 0 335 25 -- A PoE injector Cat No. 0 335 01 conforming to the 802.3 af standard (LCS2 unit format) to be installed in the patch cabinet -- Can be configured centrally via controller Cat. No. 0 332 25 or via configuration software Cat No. 0 335 24 or individually -- The management function enables the network administrator to manage the Wi-Fi access points remotely via an https web interface -- Security via WEP, WPA and WPA2 (802.11i) encryption and 802.1x authentication -- Compatible with WMM QoS and supports SNMP management -- Guest access: allows visitors free access to the Internet (access independent of the main Wi-Fi network) -- Energy saving with standby management -- Mounted in false ceiling
4. CONNECTION The installation only requires an Ethernet cable as its 48 V power supply is carried by this cable (PoE 802.3af standard). The access point is connected to the network cable via a tool-free connector identical to other Legrand RJ45 sockets.
5. MOUNTING
Accessories: -- 1 RJ45 connector -- Configuration software -- 4 fixings for cable ducting
2. PRESENTATION
Power
IN
1 OUT
IN 2
OUT
IN 3
IN 4
1
2
3
4
OUT
OUT PoE
Injector
A
B
Technical data sheet: F01372EN/00
Updated on:
Created on: 05/12/2011 1/2
802.11a/b/g/n Wi-Fi access points
Catalogue number(s): 0 335 21
6. TECHNICAL FEATURES
6. TECHNICAL FEATURES (continued)
The access point can be configured and administered via an intuitive web interface. The administrator can set up the access point (WPA encryption) with a single click using quick configuration mode. The date/time can be set automatically from the network (NTP). The configuration can be backed up/restored. Free firmware updates available on the Legrand website. A CD-ROM is available containing the tools for configuring the access point.
6.1 Electrical features
-N umber of aerials: two omnidirectional aerials integrated in the product - Ethernet interface: 10/100 Base T, RJ45, tool-free connection -W i-Fi interface: the access point can be used for simultaneous operation in 802.11b/g/n 2.4 GHz or in 802.11a/n 5GHz. - Transmission frequencies (channels) automatically adapt to the country of use - Frequency band: - 802.11b/g/n: 2.4 GHz ISM to 2.48 GHz ISM - 802.11a/n: 5 GHz to 5.85 GHz UNII - " Guest access" and "time programming" function -S ending logs via the "syslog" network -S ignal strength adjustable (from 0 to 100 mW), in order to reduce or increase the coverage area and thus increase the density of Wi-Fi terminals -P ower supply: PoE (Power over Ethernet) The 48 V power supply is provided via the Ethernet cable, 802.3af standard. This power supply is not supplied with the product -M aximum consumption: 130mA/6.2 W at 48 VDC PoE power - IP: 20 - IK: 04 - Compatible with UPnP and Apple Bonjour/Zeroconf - SSID: up to 12 SSIDs per access point - Administration interface: HTTP, HTTPS - IP addressing static or dynamic (DHCP) - Authentication: 802.1x (EAP TLS, EAP TTLS, PEAP) - Encryption (in order from least to most secure):
• Connector Permitted conductors - Single-core: 0.5 to 0.65 mm, AWG 24 to 22 - Polyethylene conductor insulation: Ø max. on 1.5 mm insulation Number of wires to be connected per connection: 1 Max. number of connections and disconnections: 5 (2 without replacing the wire) Breakdown voltage: 1000 V Contact resistance: 20 MOhms Insulation resistance: 500 MOhms at 100 VDC Caution: This product requires a PoE supply (not supplied) which must comply with the 802.3af standard. 6.2 Features of the material White polycarbonate 6.3 Climatic features -
Usage temperature: + 5°C to + 40°C Storage temperature: 0°C to + 60°C Maximum humidity during operation: 85% Maximum storage humidity: 85%
7. WEB INTERFACE The access point has a web interface for intuitive administration of the access point and for controlling or administering the following: -
Radio (signal strength), frequency (channel), (on/off) Connected users VLANs IP addressing SSIDs (up to 4 SSIDs per access point) Encryption mode and the corresponding passwords Administrator access Remote authentication on a Radius server Authorised users Firmware updates
Open
No encryption (hotspot mode)
Static WEP
Minimum protection level
WEP-802.1x
Also called Dynamic WEP, requires a Radius server
8. STANDARDS
WPA-PSK
TKIP encryption
The access point is compatible with the following standards:
WEP-802.1x
TKIP encryption, requires a Radius server
WPA2-PSK
Also called 802.11i, AES encryption
WPA2-802.1x
Also called 802.11i, AES encryption Requires a Radius server
- 802.3af: Power over Ethernet (PoE), power supply via the Ethernet cable - 802.11a: Radio transmission standard - 802.11b: Radio transmission standard - 802.11g: Radio transmission standard - 802.1x: Identification standard (EAP TLS, EAP TTLS, PEAP) Identification is handled by a Radius server - 802.1q: VLAN trunking - 802.11i: Transmitted data encryption mode also called WPA2 - 802.11n: Radio transmission standard with longer range and better speed than 802 11a/b/g
Recommended minimum protection level: WPA-PSK - Support of 802.1q VLAN trunking on the Ethernet cable - Support of assignment of VLANs via SSIDs - Support of class of service (WMM standard for Wi-Fi Multimedia), for example for voice over IP (VolP)
- WMM service class: Quality of service support, for example for voice over IP (VolP) -
Technical data sheet: F01372EN/00
Updated on:
EN EN EN EN EN EN
300 328 301 489-1 301 489-17 301 893 60669-2-1 60950
Created on: 05/12/2011 2/2
