Transcript
Model 802D-PCI
Digital Video Generator Plug-in Card
The 802D -PCI delivers full 24 bit Digital Video (DVI, LDI & TTL) up to 330 MHz.
Digital PCI Generator. The 802D-PCI lets you begin testing digital displays quickly using your PC and our VGM® software. Or, if you want to make your own interface, we give you the tools to integrate with your own ATE system. You'll save bench space and rack space with our plug-in design. And, you won't compromise precision or programmability. The 802D-PCI is a fully programmable video test signal source on a half-size PCI card. We've included hundreds of computer formats and flat panel test images so you can be sure to match manufacturers specs exactly. Plus, any 801 formats or images you've created are fully compatible. Wouldn't you like to know more?
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
DVI Output. Supports single and dual link to 330 MHz. LVDS Output. Supports single and dual link to 224 MHz. TTL. A 24 bit channel gives you the most flexibility to adapt to non-standard interfaces up to 100 MHz. 24 bits per pixel output. An 8 bit in 24 bit out lookup table for all outputs. DTV Signal Capability. Pre-programmed standard DTV formats are ready for immediate use. Digital outputs support YCbCr color encoding. HDCP Copy Protection. A built-in Pass/Fail test uses HDCP authentication protocol to check a display’s compliance. Built-in Formats. Over 200 popular video formats are built-in including VESA, ATSC, EIA-770.x, SMPTE 170, 240, 267, 274, 293, 295, 296, EIA/CEA-861B. Flat panel Images. We’ve added images designed specifically for Flat Panel displays so you can begin testing immediately. More than 300 images are built-in. Or, create your own. DMA. High speed 32 bit PCI data bus at 33 MHz. 1/2 PCI card size. Many of todays PC’s won’t accept full size cards. No problem. VGM included. Our popular Video Generator Manager software lets you easily select, view and edit formats, images and test sequences using a virtual control panel running under Windows®. DDC-2B. Now you can read and write to todays smart monitors. Querry the monitor for compatible formats. Custom Interface and Programming Software. Write your new application in a Windows® environment. We include the necessary support software to get your applications running quickly. Easy Firmware Updates with Flash EPROMs. No more changing EPROMs. NVRAM Memory. On board memory stores all of your loaded formats, images and sequences. Bit mapped images. Display bitmapped images stored on disk using VGM. (Medical, Photos) PC memory mapped. Draw directly into the 802’s video memory with your own application using your PC’s processor. Custom Test Sequences. Set up custom sequences of test images and formats for repetitive testing. WinColorKit. Microsoft’s recent color matching standard is supported with a new interactive image. Probe. Trigger a scope or inspection camera using the probe signal. Position a pulse anywhere in the frame using the 802’s knobs. 3.3V or 5V. Use standard 5 volt or lower power 3.3 volt.
Model 802D-PCI
Digital Video Generator Plug-in Card Digital Video Outputs DVI: Single link: Dual link: HDCP: Tx Keys: Tests:
TMDS 25 MHz - 165 MHz 165- 330 MHz
Built-in:
Over 300 computer and broadcast images (including custom images for flat panels)
For evaluating:
A1, A2, & Production (Option) A1B1, A1B2, A2B1, A2B2, and Production Key Test Modes: step-by-step debug, plug-in go/no-go DDC: DDC2B (read only) DDC/CI DDC2B+ Command interface (read and write) Connector: DVI-I LDI: LVDS (OpenLDI, FPD-Link) Single link: 32 - 112 MHz Dual link: 112- 224 MHz DC Balance: On / off Pre-emphasis: Set for 2 meters of cable DDC: DDC2B (read only) DDC/CI DDC2B+ Command interface Connector: 36 pin MDR TTL: 24 bit LVTTL digital video H & V sync, clock Single Channel: 8 - 100 MHz DDC: DDC2B (read only) DDC/CI DDC2B+ Command interface Connector: 50 pin header (requires optional cable)
Video Memory Size: Lookup table: Color depth:
ATE Computer Interface
Test Images
4096 x 4096 x 8 8 bits in 24 bits out all outputs 256
Video Formats Built-in: Over 220 formats User custom: 400 additional Formats Computers: 40 (VESA) Display Manufacturer's: 81 (including Apple, Sony, HP, ViewSonic, Sun, IBM, Barco) Television: 61 SDTV, HDTV, DTV formats Resolutions: 240, 288, 480, 576, 720, 1080 Scan types: interlaced, progressive, segmented frame Pixel repetition: 1X, 2X, 4X Aperatures: natural, letterbox, anamorphic, widescreen, safe-title Frame rates: 24, 25, 30, 50, 60 NTSC Tuning Option: 1/1.001 Pixel Aspects: Square 1:1, 8:9, 16:15, 32:27, 64:45 Gamuts: 0-255 full or 16-235 RGBY, 16-240 CbCr limited Sampling: 4:4:4 or 4:2:2 Edit method: PC using VGM™ software
User custom: Edit method:
Brightness Contrast Gamma Setup Focus Color Geometry Size Regulation Persistence Animation EMI Over scan Convergence Cross-Talk Bandwidth (MTF) 400 additional Images QD’s VGM™ editor is a fullfunction real-time drawing editor operating under Windows® .
Sequence Storage: Edit method: Parameters: Select: Time: Name:
2000 steps PC using VGM™ software Format, image, version, sync, gating on/off 1 sec. to 24 hours, or specify number of frames 8 characters
Horizontal Timing Frequency: 1 KHz - 250 KHz Total pixels per line: Range: 144 to 65,534 Pixels Active pixels per line: Range: 16 to 4096
Vertical Timing Frequency: 1 Hz - 650 Hz Total scan lines per frame: Range: 2 to 4096 lines Active scan lines per frame: Range: 1 - 4096 lines Frame sync: available for ATE camera lock
801 Compatibility: Fully compatible with 801 formats, images and custom applications. PCI drivers must be used. Windows support software included: Windows DLL ASCII Command Language Library: Interpreted mode Binary Function Call Library: Typical 10X increase in execution speed. QD file format commands:Read / write access to QD custom file formats (format, image, sequence & cmd) Send utilities: For sending command files that customize the 802D-PCI for your application. Sample code: Source code example of how to implement our functions in a “C” application.
PCI Bus Slot size: 1/2 PCI card size Max speed: 33 MHz Computer Requirements Hardware: Minimum ‘486 DX2-66 PC 8.0 MB RAM, minimum, Disk: 6.0 MB of hard disk space, 3 1/2” HD floppy drive to install support software Software: Microsoft® MS-Windows 9X, NT
Mechanical Size:
6.875”L x 0.5”W x 4.2”H
Electrical Voltage:
3.3 or 5 Volt card slot
Probe Tool Allows you to position a pulse anywhere within the video frame. Useful as an extremely low jitter scope trigger or inspection camera trigger.
9/02
Sales and Service Representatives Worldwide
Quantum Data reserves the right to change at any time and without notice the design or specifications of any product. © 2002 Quantum Data Inc.
2111 Big Timber Road; Elgin, IL 60123-1100 USA Phone: (847) 888-0450 • Fax: (847) 888-2802 E-mail:
[email protected] Web site: www.quantumdata.com
