Transcript
HOUSING: 803-I.C. LAMP MODULE: M-MIRROR REFLECTOR LED
526 Portal Street Cotati, CA 94931 USA
Project Name
P 707.794.0888
Date
F 707.795.4379
Type
www.8lighting.com
Prepared By
All No. 8 Lighting fixtures and components are UL/CSA listed. No. 8 Lighting trims and lamp modules are protected by one or more U.S. Patents. No. 8 Lighting reserves the right to change details of design, materials, and finish.
Comments Catalog # 803 / M –
–
–
/
/
© 2015 No. 8 Lighting Doc # 91133-08.2
/
PRODUCT FEATURES
1-1/2” 5-1/2” 5” 10”
14”
803 - I.C. HOUSING
M - LED MIRROR REFLECTOR
Housing • IC-Rated for direct contact with standard or spray-foam thermal insulation. Meets Washington State Airtight Standard WAC 51-11-05-02 and in accordance with ASTM E283 to reduce energy loss. CCEA plenum rated for City of Chicago environmental air spaces. • Accepts all Number Eight Lighting LED Lamp Modules and Trim Assemblies LED Lamp Module • Fully adjustable lamp module features 0-45 degree vertical adjustment. Use on sloped ceilings for general, accent, and wall wash applications. LED Light Engine • SD-500 85 CRI/3000K LED. Delivers up to 620 lumens at 15 watts.* • SD-700 85 CRI/3000K LED. Delivers up to 770 lumens at 20 watts.* • HI-500 95 CRI/3000K LED. Delivers up to 570 lumens at 15 watts.* • HI-700 95 CRI/3000K LED. Delivers up to 720 lumens at 20 watts.* *Output may vary depending on trim type and optical accessories used
Dimming Options • DIM1 ELV dimming driver with 120v/60Hz input (standard). Dimmable to 5% using two-wire Reverse-Phase (ELV) dimmers (see dimmer compatibility matrix). • DIM2 0-10v dimming driver with universal 120-277v/50-60Hz input. Dimmable to 5% using 0-10v dimmers. • PR1 Premium dimming driver with 120v/50-60Hz input. Dimmable to <1% using 2-wire Forward-Phase or Reverse-Phase (ELV) dimmers. • PR2 Premium 0-10v dimming driver with 120-277v/50-60Hz input. Dimmable to <1% using 0-10v dimmers. • EL1 EldoLED EcoDrive Series 0-10v dimming driver with 120-277v/50-60Hz input. Dimmable to 1% using 0-10v dimmers. • LU1* Lutron Hi-Lume A-Series dimming driver with 120v/50-60Hz input. Dimmable to 1% using 2-wire forward-phase compatible dimmers (see LEDs@ Lutron.com for list of compatible controls). • LU2* Lutron Eco System H-Series dimming driver with 120-277v/50-60Hz input. Dimmable to 1% using Lutron Eco System compatible dimmers (see
[email protected] for list of compatible controls). • LU3* Lutron Hi-Lume A-Series dimming driver with 120-277v/50-60Hz input. Dimmable to 1% using 3-wire & Eco System compatible dimmers (see LEDs@ Lutron.com for list of compatible controls). *Available with HI-500 Light Engine only. Accessories/Options • Available field interchangeable optical accessories, include:13º, 15º, 25º, 40º, 70°, 14°x50°, 2400K, 2700K, & 3500K. • Available housing mounting options include: BH bar hangers (set of two), TBC T-Bar mounting clips (set of four) and PMB panel mount brackets (set of two).
PRODUCT SPECIFIER/PRODUCT ORDER NUMBER
803
/ M-
HOUSING
/
LAMP MODULE LED MIRROR REFLECTOR
M-S
803
New Construction – AIRTIGHT-I.C. 10”W* x 14”L* x 51/2”H Accepts All No. 8 Lighting LED Lamp Modules. Rated for direct contact with insulation. *Add 1 1/2” to length or 3” to width to accommodate bar hangers.
4” SQUARE module w/ integral trim plate fits into square Seamless SeriesTM trim assemblies.
M-R
4” ROUND module w/ integral trim plate fits into round Seamless SeriesTM trim assemblies.
– – – LIGHT ENGINE – SD-500
85 CRI / 3000K 620 lumens at 15 watts
SD-700 85 CRI / 3000K 770 lumens at 20 watts
HI-500
95 CRI / 3000K 570 lumens at 15 watts
HI-700
95 CRI / 3000K 720 lumens at 20 watts
/ / /
DIMMING OPTIONS / TRIM FINISH DIM1 (Standard)
Reverse-Phase (ELV) Dimming 120v/50-60Hz
DIM2
0-10v Dimming 120-277v/50-60Hz
PR1
Premium Forward-Phase or Reverse-Phase (ELV) Dimming 120v/50-60Hz
PR2
Premium 0-10v Dimming 120-277v/5060Hz
OPTICAL
/ / ACCESSORIES**
WH
WHITE (Standard) Field paintable to match ceiling finish
PN
POLISHED NICKEL*
SN
SATIN NICKEL*
VNSP
13° very narrow spot
NSP
15° narrow spot
NFL
25° narrow flood FL (Standard) 40° flood
PB
WFL
EldoLED 0-10v Dimming 120-277v/50-60Hz
SB
LS
Lutron Forward-Phase Dimming 120v/50-60Hz
OB
CF24
Lutron Eco System Dimming 120-277v/5060Hz
BK
EL1
POLISHED BRASS*
LU1*
SATIN BRASS*
LU2*
OIL-RUBBED BRONZE*
LU3*
Lutron 3-wire and Eco System Dimming 120-277v/50-60Hz *Available with HI-500 Light Engine only.
BLACK* *Specialty finish. Additional lead time required.
70° wide flood 14° x 50° linear spread 2400K color filtering lens
CF27
2700K color filtering lens
CF35
3500K color filtering lens
ADDITIONAL OPTIONS** BH
(Standard) BAR HANGERS (Set of two) included with housing.
TBC
T-BAR MOUNTING CLIPS (Set of four) included with housing.
PMB
PANEL MOUNTING BRACKETS (Set of two) included with housing.
**40° optical lens and bar hangers (for joist mounting) are included standard. Additional optical accessories and options shipped separately. Warranty All No. 8 Lighting products are warrantied for five years.
91133-08.2 PAGE 1
803/M PERFORMANCE SUMMARY
Light Engine
CRI
CCT (K°)
System Wattage
Delivered Lumens
SD-500
85
3000
15
620
SD-700
85
3000
20
770
HI-500
95
3000
15
570
HI-700
95
3000
20
720
*Output may vary depending on optical accessories used
LAMP MODULE M – LED MIRROR REFLECTOR Lamp Module M incorporates the magnetic trim plate into the lamp module assembly, and is available with either a SQUAR or ROUND trim plate (Seamless SeriesTM only). Lamp Module M features 0-45 degree adjustable aiming angle and is designed to work in most slope ceiling environments for general, accent, and wall wash lighting applications. Trim kit assemblies are available for plaster, wood, stone or acoustic tile ceilings. Lamp Module M is available in many designer finishes: White, Polished Nickel**, Satin Nickel**, Polished Brass**, Satin Brass**, Oil-Rubbed Bronze**, and Black**. **Lot variations in specialty finishes may occur. Ordering ALL trim kits and matching M Modules at the same time is recommended to minimize variations in finishes.
WH - WHITE (SQUARE) - Field paintable to match ceiling finish
WH - WHITE (ROUND) - Field paintable to match ceiling finish
PN-POLISHED NICKEL
SB-SATIN BRASS
SN-SATIN NICKEL PB-POLISHED BRASS
OB-OIL-RUBBED BRONZE BK-BLACK
LAMP MODULE M – TRIM ASSEMBLY CROSS SECTION DETAIL
Note: Cross sections are for illustration purposes only. Refer to housing installation instructions for complete installation details. 91133-08.2 PAGE 2
