Transcript
StarServe Contractor Series Quad Channel Modulator with IR 8074VMPIR Series The StarServe 8074VMPIR Contractor Series Video Modulator is a multi-channel modulator unit, housed in a set top box. The 8074VMPIR is designed to take multiple Baseband (Composite) video signals from VCRs, DVDs or Set Top Boxes and converts them into userselected Broadband channels (UHF 21-69). Once connected to a StarServe Video Distribution Unit (VDU), these Broadband channels can be viewed on any connected television, within the home. The user selects the output frequency (Broadband channel) using the seven segment, two digit display and up/down push buttons located on the front of the modulator unit. Any TV connected to the output via coax can receive the signal, when tuned to the same Broadband (UHF) channel.
clipsal.com/cis
The 8074VMPIR features a 5V IR engine and connections for IR emitters. This allows remote TV locations to have IR control of the connected components (VCRs, DVDs and Set Top Boxes), when used with an 8073/8VHPIR StarServe Contractor Series Video Hub. The 8074VMPIR StarServe Contractor Series Quad Channel Video Modulator utilises leading edge drift free circuitry, providing high quality picture reproduction throughout the home. The unit can be powered by connecting a 12Vdc Power Pack directly to the unit or via a StarServe wall plate (2031RFT Series). For convenient mounting the units are housed in a set top box.
Typical Connection diagram
Product Specifications RF Input (Video) Video Input Termination (switch selectable) Audio Differential Gain Differential Phase Signal/Noise Modulation Channel Ranges Output Level Dimensions (L x W x D) Shipping Weight
Clipsal Integrated Systems Pty Ltd Head Office 12 Park Terrace, Bowden South Australia 5007 PO Box 103 Hindmarsh South Australia 5007 (08) 8269 0560 Telephone International +61 8 8269 0560 Facsimile (08) 8346 0845 +61 8 8346 0845 International Internet www.clipsal.com/cis E-Mail
[email protected]
International Enquiries Head Office Export Department Telephone +61 8 8269 0587 +61 8 8340 7350 Facsimile E-Mail
[email protected] New Zealand Clipsal Industries (NZ) Ltd (Auckland) Telephone +64 9 576 3403 Facsimile +64 9 576 1015 E-Mail
[email protected]
1V Peak to Peak @ 75Ω 75Ω in normal mode (NORM) >1MΩ in loop through mode (LOOP) 300mV Peak to Peak 3-5% <4º 54dB PAL (AUS) UHF 21-69 +25 dBmV (+85 dBuV) 192mm x 135mm x 39mm 750 (without PS)
Malaysia Clipsal Integrated Systems (M) Sdn Bhd Unit 3-2 Level 3, CP Tower No 11, Jalan 16/11, Pusat Dagang Seksyen 16 46350 Petaling Jaya Selangor Darul Ehsan, Malaysia +60 3 7665 3555 Telephone Facsimile +60 3 7665 3155 E-Mail
[email protected] Singapore CIS Pte Ltd (Singapore) No. 8, Jurong Town Hall Road #24-05-06 The JTC Summit Singapore 609434 +65 266 1998 Telephone Facsimile +65 266 3922 E-Mail
[email protected]
Hong Kong Clipsal Integrated Systems (HK) Limited Telephone +852 2 487 0261 South Africa Clipsal South Africa (Pty) Ltd Telephone +27 11 314 5200 Taiwan Clipsal (Taiwan) Co Ltd Telephone +886 2 2558 3456 Thailand Clipsal Thailand Ltd Telephone +66 2 952 5338 United Kingdom Clipsal Ltd (UK) Telephone +44 1494 521 111
International Representatives China Clipsal China Ltd Telephone +86 755 246 1122 Greece Clipsal Hellas S.A. Telephone +30 1 0993 9165
Patented © Copyright Clipsal Integrated Systems Pty Ltd 2003
