Transcript
81
2012 NEW
Low profile boundary microphone Available in Unidirectional type. Designed for a wide range of applications, conferencing, installed sound, surveillance. 28
74
30.8
* Unidirectional pickup pattern * Extended frequency response * Built in Low Cut and -10 dB Pad * Option with Matt Black or Matt White * Terminated with XLRM connecter
CM-503N
2012 NEW
Low profile boundary microphone Available in omnidirctional type . Designed for a wide range of applications, conferencing, installed sound, surveillance. 28
74
30.8
* Omnidirectional pickup pattern * Extended frequency response * Built in Low Cut and -10 dB Pad * Option with Matt Black or Matt White * Terminated with XLRM connecter
CM-502 Ø21
0 780
* Wide dynamic range and frequency response for accurate sound reproduction. * High sensitivity and excellent directional pattern allow effective pick-up. * Self-contained electronics eliminate need of external power modules. * Assisted hanger benefits accurate miking. * Mount plate allows microphone to be fixed on the ceiling or wall. * Easy installation. * Durable material allows permanent installation. * Rusty free finish.
6
2.
ø1
Model Type Frequency Response Polar Pattern Sensitivity (at 1,000Hz) Attenuation Switch Low Frequency Roll-off Impedance Max. SPL For 1﹪ T.H.D Signal To Noise Ratio Current Consumption Power Supply Output Connector
CM-503U Electret Condenser 40 to 20,000Hz Half-Cardioid -60±3dB* (1mV)* 0dB=1V/μbar -10dB 80Hz 220Ω 140dB 70dB ≤3mA 9-52 VDC phantom power XLR-M type(power module)
CM-503N Electret Condenser 40 to 20,000Hz Omnidirectional -60±3dB* (1mV)* 0dB=1V/μbar -10dB 80Hz 220Ω 140dB 68dB ≤3mA 9-52 VDC phantom power XLR-M type(power module)
Model Type Frequency Response Polar Pattern Sensitivity (at 1,000Hz) Impedance Max. SPL for 1% THD Connector Standard Accessories
105
Choir Microphone
.2
57
CM-502 Electret Condenser 100~18,000 Hz Supercardioid -48dB*(4mV)*0dB=1V/μbar 220Ω 125dB male XLR type Windscreen / Flexible hanger / Mounting plate
CM-503U , CM-503N , CM-502
Wired Microphone
CM-503U
82
CM-601 / CM-602 Boundary Microphone 72
22.5
110
* The CM-601 is designed for conference, house of worship, and theater applications. * The CM-601 features red LED indicator, 3 step LowCut switch and back electric cardioid condenser capsule. * The membrane ON/OFF switch can be programmed to PUSH ON/PUSH OFF,PUSH TO TALK and PUSH TO MUTE three modes. * The precisely calculated circuit plus tailored capsule response ensure transparent sound quality. * Internal shock mount minimizes mechanical noise. * The CM-602 is a simplified version of CM-601 with ON/OFF switch only.
Cellphone Friendly
PTT-1
Ø39.5
Push-To-Talk Microphone
TT-50
137
This push-to-talk microphone is designed for PA purpose. Coiled cable is attached. A wall hook is designed for easy install. 3 Pin XLR-M type connector.
Ø17
Tabletop Microphone 71.5
This tabletop conference microphone is designed for recording.
Ø16
Model Type Frequency Response Sensitivity (at 1,000Hz) Directional Pattern Impedance Max. SPL for 1% THD Signal-To-Noise Ratio Power Supply Current Consumption Output Connector Net Weigh CM-601 Only Low Frequency Roll-off Switches
CM-601 , CM-602 , PTT-1 , TT-50
CM-601 / CM-602 Electret Condenser 30~12,000 Hz -53±3 dB* (2.23mV) 0dB=1V /μbar Half-Cardioid 100Ω 125 dB 67dB 12-52 VDC phantom power ≤6mA 3P Mini XLR-M type(power module) 88 grams
80Hz , 120Hz Push control: on/off Function selection:push on/off, momentaryon/off Low cut : low frequency roll-off
Model Type Frequency Response Polar Pattern Sensitivity (at 1,000Hz) Impedance Phasing
Net Weight Length of cord Connector Power supply
PTT-1 Dynamic(moving coil) 50~15,000 Hz Cardioid, rotationally symmetrical about microphone axis, uniform with frequency -68±3dB*(0.398mV)*0dB=1V / μbar 600Ω Positive pressure on diaphragm produces positive voltage on pin 2 output with respect to pin 3
TT-50 — 50~18,000 Hz Omni-direction
350 grams — — —
— 1.5 meter 3.5 mm mono plug 1.5V battery (LR-44)
-65 dB 1000 Ω —
