Preview only show first 10 pages with watermark. For full document please download

8370-101, 8370-102, 8370-103

   EMBED

Share

Transcript

Installation Swing-Up Grab Bar IMPORTANT: All mounting hardware is supplied by installer and must have a minimum pull-out rating of 1,000 lbs. Recommended Mounting Dimensions After installing grab bar, mount bumper to wall (screw and anchor supplied by installer) Centerline of the Grab Bar 2-1/2" (64mm) 15" (381mm) 2-1/2" (64mm) Centerline of the Toilet Centerline of Grab Bar 7-3/4" (197mm) Assembly Bolts 5" (127mm) 33-3/8" (848mm) to 36-3/8" (924mm) recommended Finished Floor IMPORTANT: Periodic maintenance of assembly bolts (by torquing to 25–30 ft lbs) is required. P20-154 Rev. B; ECM 10-15-040 © 2010 Bradley Corporation Page 1 of 1 7/9/10 P.O. Box 309, Menomonee Falls, WI USA 53052-0309 PHONE 800.BRADLEY (800.272.3539) FAX 262.251.5817 bradleycorp.com