Transcript
Distributed by / Distribué par: Elfe Juvenile Products 5171 Thimens St-Laurent, QC H4R 3C6 1-800-667-8184
[email protected]
English
3-in-1 convertible crib, changing table, clothing organizer.
fo ity plic
Our service is fast, free and easier than returning the product.
Important: See back cover for important information.
Nursery In-a-Box
r chi
If a part is missing or if you have any questions, call us. PLEASE DO NOT return product or parts to the store where they were purchased before calling us. Please call us toll free at:
simplicity for child ldren ren
sim pli cit
yf or
Before you begin assembly, please read these directions. Make sure all pre-assembled parts are tight. Store this instruction manual in the envelope, attached to the mattress support tube, for future reference.
1-800-667-8184
ch il d re n
Important Information:
chi for city i l p si m
sim en l dr
Important: In order to help our customer service representatives better assist you, we require that you complete the information below before calling: Model Number:
ren simplicity for children
Manufacturer’s Code:
Note: Instructional images may vary in style from the product you purchased.
sim
Manufacturer’s Code
p l ic
Model Number
ity for chil d
ren simp
licity
for chil d
NOTE: The label containing the Model Number and Manufacturer’s Code can be found on the mattress support, and also on the warning envelope attached to the mattress support tube (NOTE: Do not remove this envelope).
©2007 Simplicity™
8910_IS0031d_Elfe_ENG
7/07
Thank you for purchasing this Simplicity for Children product. In doing so, you’ve entrusted us with a small part of your child’s care: something that we do not take lightly. At Simplicity for Children, we strive to make each product one that will provide a quality, safe environment for your child as well as a lasting value for you. We trust that your experience with this product - as well as any future purchases - will be a positive one.
Notes
Understanding that we are only human, we know that occasionally something less-than-perfect might occur in the manufacture of our products. If you have such an experience, or have any manner of question about Simplicity or our product line, I would encourage you to contact us via our web site, E-mail, or our toll-free Customer Service number. We are here to serve you. Thank you again for the privilege of helping you care for your child. Happy Parenting!
Ken Waldman President Simplicity for Children Web site: www.simplicityforchildren.com E-mail:
[email protected]
Toll-free: 1-800-667-8184 Elfe Juvenile Products 5171 Thimens St-Laurent, QC H4R 3C6 (Canada)
2
19
70
Notes
Crib Parts
65
Track Connectors
60 55
50 45
40
(B) Stationary Side (x1)
(C) Drop Side (x1) (L) Mattress Support Allen Wrench Bracket (x2) (M) Bracket Bolts 17mm (x2)
35
30 25
20
(A) Crib Ends (x2) (Left and Right)
(D) 35mm Bolts (4x)
Mattress Support Assembly Parts.
15
(E) 17mm (4x) Blue
10
(I) Mattress Support Posts (2x)
5
(F) 25mm Long Cone Head Bolts (4x)
0
(mm)
(J) Hollow End Cross Tubes (6x)
Ruler for Measuring Bolts
(G) 17mm Short Cone Head Bolts (8x)
(K) Threaded End Cross Tubes (4x)
(H)“S” Bracket (4x)
Changer Parts (D) Shelf Support (x4)
(B) Shelf Inserts (x2) (A) End Frame (x2)
(B2) Top Shelf Insert (x1)
(E) Shelf Braces (x4) (F) Side Rails (x2)
(G) Pad
18
(H) Middle Support Bar Screws (8x)
Parts List
(I) 32mm Bolts (x12)
3
Top Shelf Assembly
Clothing Organizer Parts
3. Pre-assemble items as shown in figure 3, 3a, and 3b.
(B) Bolt End Support Bars (x5) 4. Once assembled, lay flat with supports facing down and secure shelf insert to both middle supports using four screws. Figure 4.
(C) Bolt End Support Bar w/ bolt hole in middle (x1)
3
3a (B2)
(E)
(F)
3b
4
(E) Top Braces (x2) (A) Ends (x2)
(F) Top (x1)
(Left and Right)
Furniture Wall Strap Hole. Wall Strap instructions can be found in the “clothing organizer” hardware bag.
5. Insert the assembled shelves unto one of the End Frames (A). Secure in place using six 32mm bolts (I). Figure 5.
Drawer Parts (A) Drawer Sides Left (x4)
Right (x4)
(B) Drawer Back (x4)
(G) Back (x1)
5
(H)
(A)
(I)
(C) Drawer Front (x4)
6. Stand unit on end and place the second End Frame (A) unto the shelves. Secure in place using six 32mm bolts (I). Figure 6.
(D) Drawer Knobs (x8)
(H) 45mm (x12)
(E) Drawer Bottom (x4)
(I) 29mm (x5) (J) Top Brace Screws (x6)
6
(A)
(I)
(F) Phillips Screw (x32)
(K) Back Screws (x12)
(G) Knob Screw (x8)
Parts List
4
17
Changer Warnings
Crib Warnings
! WARNINGS
Read these instructions before use of this product. Failure to follow these warnings and the assembly instructions could result in serious injury or death.
• To prevent serious or fatal injury from falls, always keep child within arm’s reach. Never leave child unattended. Read all instructions before use of the changing table.
!
• Check all screws and bolts and make sure they are tight before using. From time to time check over your Simplicity Changing Table. You should never use it if parts are missing or broken.
• CAUTION: Any mattress used on this crib must be at least 27-1/4 inches (69 cm) by 51-5/8 inches (131 cm) with a thickness not exceeding 6 inches (15 cm). When used as a toddler bed, the minimum mattress thickness shall be 4in. (100mm). If guardrails are used as the mattress containment means, guardrail(s) provided must be used.
• Maximum weight of child: 25 lbs (11.3 kg). • Keep instructions for future use.
• DO NOT use a water mattress with this crib.
• Use only the pad provided by the manufacturer.
• Ensure a safe environment for your child by checking regularly, (that every component is properly and securely in place) before placing your child in the crib. Making sure that all bolts and fasteners are tight.
Changer Assembly Parts List (D) Shelf Support (x4) (B) Shelf Inserts (x2)
(B2) Top Shelf Insert (x1)
(E) Shelf Braces (x4) (G) Pad
(A) End Frame (x2)
Middle Shelf Assembly
(I) 32mm Bolts (x12)
1
1. Preassemble items as shown in Figure 1. Once assembled lay flat with supports facing down and secure shelf insert to middle support using two 1a screws. Figure 1a.
• When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used and can be converted to the transitional bed.
(D) (B)
(E)
• After raising side, make sure latches are secure. • DO NOT leave child in crib with side lowered. Be sure side is in raised and locked position whenever child is in crib.
(D)
• Mattress supplied with crib must be no thicker than 6 in. (15 cm) and
Lower Shelf Assembly
2. Same as Middle Shelf assembly. See above.
• Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use crib if any parts are missing or broken. Ask your dealer or write to manufacturer for replacement parts and instructional literature if needed. DO NOT substitute parts. • When child is able to pull to a standing position, set mattress to lowest position and remove bumper pads, large toys and other objects that could serve as steps for climbing out.
(F) Side Rails (x2)
(H) Middle Support Bar Screws (8x)
WARNINGS
• Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE. Do not use this crib if the instructions cannot be strictly followed.
must fit snugly. No more than a 1 3/16 in. (3 cm) gap on any side is allowed when the mattress is pushed into one of the corners of the crib.
(H)
16
5
Crib Warnings continued from pg. 5
!
WARNINGS
7. Place the Top (F) onto the assembled unit. Figure 7.
7
8. Insert a 29mm bolt (I) through the hole on the top support bar and secure to the top. Figure 8.
8
(F)
• DO NOT place near window where child may fall out or where cords from blinds or drapes may strangle the child. DO NOT place cords, straps or similar items that could become wound around the child’s neck in or near the crib. • Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation. • If refinishing or touching up, use a non-toxic finish specified for children’s products.
Transitional Bed Warnings
!
WARNINGS
• DO NOT place near window where child may fall out or where cords from blinds or drapes may strangle the child.
(I)
•The mattress intended for use on the bed shall be a full-size crib mattress having minimum dimensions of 51-5/8 in. (1310mm) long by 27-1/4 in. (690mm) wide and 4 in. (100 mm) thick.
9
• The minimum age for a child using this transitional bed shall not be less than 15 months and the maximum weight shall not be greater than 50 lbs. (22.7kg). • DO NOT use with less than 12 in. (31cm) of space between the transitional bed and solid objects such as a wall or dresser. Child could slide into smaller spaces and suffocate. • Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such as hood strings or pacifier cords. DO NOT suspend strings over crib or attach strings to toys. • DO NOT use water mattress. • DO NOT use casters on Transitional Bed. • If guardrails are provided as the mattress containment means, the guardrail(s) provided must be used to avoid the formation of a gap between mattress and bed that could cause an entrapment. If mattress retention clips are provided they must be used to restrict mattress movement.
6
9. Secure the top to the top braces using two 29 mm bolts (I). Figure 9. Repeat for other side. 10. Attach the back (G) using the twelve small screws (K). Make sure wall strap hole is near the top. Figure 10.
(I)
10 (G)
To secure dresser to a wall, please refer to the wall strap instructions located with the wall strap.
(K)
15
3
3. Attach the last Support Bar (B) onto the bottom hole of the side using one 45mm bolt (H). Figure 3.
Mattress Support Assembly. Parts Needed: Refer to pg. 3, “Crib Parts” Place one of the Mattress Support Posts on the floor with the 10 large (I) holes facing inward, and the 4 small holes facing out. Make sure the “Bottom” sticker is facing the floor.
(H) (B)
(H) 5. Place the other End panel (A) onto the support bars and secure with six 45mm bolts (H). Figure 5.
(G)
(G)
(G)
Insert the Threaded Cross Tubes (K) into the first, fourth, seventh, and tenth holes of the Mattress Support (K) (K) (K) (K) Post (I). Insert 4 Short Cone Head (J) (J) (J) bolts (G) into the holes that line (I) up with the Threaded Cross Tubes (K). Insert the Hollow Cross Tubes (G) (G) (G) (G) (J) into the remaining holes. NOTE: The envelope with required Assemble the second Mattress safety warnings is attached to the Support Post (I) on to the cross green cross tube. Do not remove tubes (make sure “bottom” sticker this envelope. Use it for storage of is facing down). Do not tighten these instructions. bolts until you have all 8 bolts inserted on both Mattress Support Posts. With mattress support flat on the floor, tighten all bolts. (F)
4
4. Lay unit on its side. Figure 4.
(G)
5 (A)
Attaching Angled Brackets Attach the “S” Bracket (H) to the end of the Mattress Support Post (I) using one of the long cone head bolts (F). Repeat for all four Mattress Support corners. Brackets should face up.
6 6. Stand unit upright. Figure 6.
(H)
(I)
14
7
Crib Assembly
Clothing Organizer Assembly Track Connectors
Parts List
Parts List (B) Bolt End Support Bars (x5)
(C) Bolt End Support Bar w/ bolt hole in middle (x1)
(B) Stationary Side (x1) (C) Drop Side (x1)
(A) Crib Ends (x2) (Left and Right)
Attaching Stationary Side Slide tab ends of the stationary side (B) into the left Crib end panel (A). The rounded rail of the stationary side must be up. Secure top and bottom rails to end panel with 35mm bolts (D). Repeat for right Crib end.
(F) Top (x1)
(J) Top Brace Screws (x6)
Allen Wrench
(D) 35mm Bolts (4x)
(E) Top Braces (x2)
(G) Back (x1)
(A) Ends (x2)
(A)
(Left and Right)
(I) 29mm (x5) (K) Back Screws (x12)
(H) 45mm (x12) (B)
(D) 35mm
Note: Bolts go through the end panels into the end of the Stationary Side.
1.Attach a Top Brace (E) to one of the Ends (A) using three Top Brace Screws (J). Figure 1. Repeat for other side.
(E)
1 (A)
Parts List
Assembled Mattress Support
Attaching Mattress Support Attach the completed Mattress Support Assembly to the Crib using four 17mm Bolts with Blue Locking paint on the threads (E).
(E) 17mm (4x) Blue
2.Using five 45 mm (H) bolts, attach the Bolt End Support Bars (B) to an end. NOTE: The Support bar with the hole in the middle (C) goes in the top hole position. Figure 2.
(E) 17mm
2 (C) (B) (B) (B) (B)
NOTE: For infants set the mattress support in an upper position for greater accessibility. As your child grows and can stand the mattress support must be lowered. See Warning Statements.
(H) 45mm
8
13
2. Slide the Drawer bottom (E) into the drawer assembly as shown in Figure 2&2a. The finished side of the panel faces into the drawer. 3. Assemble the back panel (B) of the drawer to the drawer assembly per Figure 3&3a. Check all screws for tightness.
Attaching Drop Side
2
If drop side does not slide smoothly, apply a small amount of petroleum jelly to the tracks for easier use.
2a
4. Using Drawer Knob Screws (G), install 2 knobs (D) on each Drawer - Figure 4.
(C)
Line up top of drop side rail (C) with the top of both upper tracks. Raise rail about one inch. Then line up lower track. Slide drop side rail Top down until it locks in place. Track
(E)
When assembly is complete, return instructions to the envelope attached to the Mattress Support. Close envelope to retain instructions for future use.
(E)
COMPLETED DRAWER ASSEMBLY IS SHOWN BELOW Repeat steps 1-4 until all the drawers are assembled.
(C)
Bottom Track 3a
3 (B)
Lowering and Raising Drop Side
(B)
Lift
To lower: The drop side, (1) lift at the center of the top rail and then (2) push in with your leg at the center of the bottom rail. (3) Allow the drop side to slide into it’s lower position.
1 Let drop side slide into lower position.
3 2 Push with Leg
4 (D)
To raise: The drop side to the upper position, lift at the center of the top rail until both ends click into place.
(G)
12
Click!
9
Clothing Organizer Warnings
Converting to a Transitional Bed
!
Remove Drop side. Lift drop side. Push in on the tabs at the top of both lower tracks to slide the drop side up off the tracks as shown.
WARNINGS
• Periodically check all bolts and screws to maintain the stability of your chest.
Tab
Position Mattress Support. Mattress support must be in the lowest position. If not, use the allen wrench to remove bolts. Lower support into position and re-attach to headboard.
• Do not overload drawers, particularly the top drawers. • Do not allow children to climb on this product.
Drawer Assembly
Remove Casters. To protect your floor and the crib legs pull casters off crib. Make sure casters sockets stay on legs.
Parts List (A) Drawer Sides (B) Drawer Back (x4) Left (x4)
Remove upper and lower tracks.
(F) Phillips Screw (x32)
Right (x4)
(D) Drawer Knobs (x8) (C) Drawer Front (x4)
(G) Knob Screw (x8) (E) Drawer Bottom (x4)
Attaching Mattress Support Brackets
1. Attach Drawer sides (A) to the drawer front (C) as shown in Figures 1&1a. Be sure the bottom grooves all face into the drawer and the grooves line up as shown in Figure 1a.
Locate the threaded inserts underneath the mattress support rail. Bolt one bracket (L) to each of these inserts using the two 17mm bolts (M). Brackets are slotted so that you can adjust position of bracket to avoid interference with mattress support bolts as shown.
NOTE: “SI” logo on side panels will face the front of the drawer to the outside as shown in Figure 1.
(L)
1 (C)
(A)
1a (A)
Drawer Bottom Grooves
(C)
(M) 17mm
10
11
