Transcript
8x1 Analog Audio
NSM-8X1A2
DESCRIPTION
FEATURES
The NSM-8x1A2 is an analog stereo audio routing switcher which provides selectable matrix sizes with auto-switch capabilities. Matrix sizes that can be filed configured are single stereo 8x2, single mono 16x4, stereo 8x1 with dual outputs, quad mono 4x1 (married) and quad mono 4x1 (breakaway). This module, as is the case with all modules in the NEO family, can be controlled locally via a front-edge display or from a remote location. .USER CONTROL VARIABLES Setup
Mode
Status
Swap Channel Signal Detect Alarms Crosspoint (mode dependent) Output 1 Output 2 Output 3 Output 4 Alarms
SPECIFICATIONS SIGNAL PERFORMANCE Gain THD+N
Crosstalk Frequency Response S/N Ratio
ANALOG AUDIO INPUT Number of inputs Input connector Signal type Normal level Maximum level Impedance CMRR
NEO
Stereo Mono Channel Select Timer Major, Minor, None
8x1, 8x2, Dual 4x1 16x4, dual 8x1, dual 8x2, quad 4x1
High quality analog audio routing switcher Can be user configured for the following matrix sixes – – – – –
single stereo 8x2 single mono 16x4 stereo 8x1 with dual outputs quad mono 4x1 (married) quad mono 4x1 (breakaway)
Relay Bypass Swap / Sum Capability Command Control System (CCS) Enabled Signal processing (A/D, D/A, Frame Synchronizers, Distribution Amplifiers, etc.) functions and matrix routing can be mixed in the same frame
Inputs 1-16, 1-8, 1-4 Inputs 1-16, 1-8 Inputs 1-16 Inputs 1-16 Major, Minor
Specifications and designs are subject to change without notice.
Unity, ±0.1 dB <0.01% , 20Hz to 20kHz, +24dBu , 600Ohm or High Z load <0.005% , typical IMD (SMPTE 4:1) <0.005% , +24dBu, 600 Ohms or High Z load <0.002% , typical >100dB isolation, 20Hz to 20kHz, all hostile, typical >95dB isolation, worst case <±0.1dB, 20Hz to 20kHz-3dB point: >200kHz >110dB ref. to +24dBu, 20Hz to 20kHz 8 stereo DB-25 Balanced analog audio +8 dBu +30 dBu (+24 dBm for 600 Ohms version) High Z (20k Ohms) or 600 Ohms > 75 dB rejection, 20Hz to 20 kHz
ANALOG AUDIO OUTPUT Number of outputs Output connector Signal type Maximum level DC output level Maximum cable length Minimum load Impedance
2 stereo DB-25 Balanced analog audio +30 dBu (+24 dBm for 600Ohms version) ± 50 mV maximum 100 m (328 feet) Belden 8451 or equivalent 600 Ohms 66 Ohms(600 Ohms)
8x1 Analog Audio ORDERING INFORMATION NSM-8X1A2-66
NSM-8X1A2-600
NSM-8X1A2 For more information visit www.leitch.com
8x1 Stereo Analog Audio Router, can be user configured to single stereo 8x2, single mono 16x4, stereo 8x1 with dual outputs, quad mono 4x1 (married), quad mono 4x1 (breakaway), includes back module, two 25 pin and one 15 pin DB-type connectors, optional plug-in adaptors available i.e. DTB-25, DTB-15), 66 Ohm output 8x1 Stereo Analog Audio Router, can be user configured to single stereo 8x2, single mono 16x4, stereo 8x1 with dual outputs, quad mono 4x1 (married), quad mono 4x1 (breakaway), includes back module, two 25 pin and one 15 pin DB-type connectors, optional plug-in adaptors available i.e. DTB-25, DTB-15), 600 Ohm output"
See the CCS (Command Control System™) section of the catalog for detailed explanations of applications and remote control panels applicable to the NEO product line. Leitch's CCS offers applications such as Pilot™ that provide the tools you need to configure, control, monitor, diagnose, and provide secure access to the equipment on your network regardless of your network topology.
NEO
