Transcript
900 Series
In wall speakers
Product Description 900 Series speakers bring true fidelity to theater and distributed audio systems. Distributed Audio Systems 900 Series speakers have high sensitivity, making them perfect for multi-room systems. With bass to 40 Hz, the 960 and 970 easily fill rooms up to 4,000 ft3 with full-range sound. Theater Systems We designed the 900 speakers with our Vocal Integrity® system design for use as front L/C/R’s in theater systems. Smooth octave-to-octave transition means vocals are clear and distinct, on-screen effects are easy to pin-point. Product Features • Constrained High Mass Frame combines aluminum with a 1" MDF baffle for greater clarity in the midrange and bass • Pi Space Tuning allows placement near side walls or ceilings • All metal Slot/Lock® clamping system forms a tight leak-free seal • Pure silk tweeter with neodymium motor • Weather-resistant design can be used in environmental extremes • Our exclusive super-flat frame and floating micro-perf grilles look great in any room
Product Construction Constrained High Mass Frame Modeled after our acclaimed JAM in-wall speakers, we combine an aluminum frame, a closed-cell foam damping layer, and a 1" sheet of medium density fibreboard for true sonic fidelity. By using this frame, instead of a typical plastic unit, we dramatically increase the sonic impact of the system. You’ll hear deeper bass, and improved midrange clarity.
Driver Complement Our audiophile silk dome tweeter is the key to our performance. This high power handling, unit spreads sound evenly throughout the room.
960
The 960 is a two-way design with a high powerhandling 61/2 bass unit. The 960c is a three-way center channel speaker with a vertically mounted tweeter/midrange combination for superb horizontal dispersion. The 970 uses dual bass units for additioanl output in larger rooms (up to 4,000 ft3). For bass, the 900 Subwoofer uses dual 8” bass units.
Pi Space Tuning Our exclusive Pi Space Tuning overcomes “bloated” midbass gain when the speaker is placed near side walls or ceilings.
Vocal Integrity® System Design We’ve designed and tested our systems to exhibit the lowest level of distortion in the critical midrange —
960c
especially off axis. This requires attention to all elements of the design, from driver parameters to crossover tolerances. The end result is a series of speakers that outperform the field.
Flush To The Wall Our injection-molded aluminum frame sits just a few millimeters off the wall. And with our floating grilles held in place with concealed magnets, the 900 Series speakers have an elegant, unobtrusive look.
Weather Resistant Construction You can place 900 Series speakers in high humidity areas, like kitchens, bath, and protected outdoor settings. All exposed components are weather resistant.
970
900 Subwoofer
Specifications Model
960
960c Center
970
900 Subwoofer
Maximum Output
106dB (with 100w)
108dB (with 100w)
109dB (with 100w)
107dB (with 150w PowerPack)
Room Size
Up to 3,000 ft3
Up to 3,000 ft3
Up to 4,000 ft3
Use 1 subwoofer for each 2,500 ft3
Near-Field Response
50-20,000 Hz
50-20,000 Hz
50-20,000 Hz
32-200 Hz
6dB Downpoint
40 Hz
40 Hz
40 Hz
29 Hz
Coverage Angle (-6dB)
60° H, 50° V
60° H, 50° V
60° H, 50° V
NA
Sensitivity (1w, 1m)
86dB
87dB
88dB
NA
Impedance
8 ohms
8 ohms
8 ohms
NA
Tweeter
1" silk dome
1" silk dome
1" silk dome
NA
Bass Unit
61/2"
3" enclosed midrange, 61/2" bass unit
Dual 61/2"
Dual 8"
Weight
8 lbs. each
9 lbs. each
10 lbs. each
11 lbs. each
Depth In Wall
31/2"
31/2"
31/2"
3"
Cutout Dimension
73/4 x 113/4"
113/4 x 73/4"
73/4 x 183/4"
85/8 x 183/4"
Outer Dimension
91/4 x 131/2"
131/2 x 91/4"
91/4 x 203/8"
91/4 x 203/8"
14290 Danielson Street, Poway, CA 92064
©2004 Bay Audio. Specifications are subject to change. ph 858-486-5040 fx 858-486-5041 www.BayAudio.com
