Transcript
| 9000 Series
|
format converters
9068
Upconverter with SD-SDI Input, Timecode and Closed Caption Support The 9068 is a converter specifically designed for SD-to-HD conversions. It provides SD-SDI input, video proc with video level controls. The 9068 also provides AFD functions that detect the incoming AFD code, allow independent custom ARC to be applied for each incoming AFD code, and set the desired AFD code to be inserted on the output, even if there is no code detected on the input. Closed captions and timecode are preserved through upconversions. The 9068 provides full user remote and card-edge proc control (with user memory) that allows adjustment of gain, offset, saturation, hue, and many other controls. Factory presets enable a return to factory settings.
Features • SD digital inputs • Upconversion and aspect ratio conversion • AFD code insertion and AFD ARC control
SD SDI In
EQ, Reclock Deser.
• HD/SD closed captioning support and flexible timecode processing
• Remote control/monitoring via DashBoard™ software or OGCP9000 control panel
• Selectable safe action, safe title, and center cross overlays
• Detail enhancement and noise reduction
• 16 user presets
• Five year warranty
Up Conversion DashBoard™/OGCP Monitor/Control
Color Proc
AFD Insertion
HD Serialize
Ethernet 10/100 (On Frame)
DA
SD - SDI Reclocked Out
DA
SD - SDI Reclocked Out
DA
HD - SDI Processed Out
DA
HD - SDI Processed Out 9068
9068 Block Diagram
Ordering Information 9068
Upconverter with SD-SDI Input, Timecode and Closed Caption Support
RM20-9068-A
8321 Frame Rear I/O Module (Single Slot) HD/SD-SDI Input, 4 SDI Reclocked Outputs, 4 SDI Processed Outputs
Rear modules also available for 8310 10-slot openGear™ frame (RM-XXXX-X), except where noted. Sales 800 669 1691 / Direct 217 344 1243 / Fax 217 344 1245 / www.cobaltdigital.com Specifications subject to change without notice. E. & O.E. ©2010 Cobalt Digital Inc.
4/2010
| 9000 Series
format converters
9068
SDI IN
NC
RCK OUT 1
RCK OUT 2
RCK OUT 3
RCK OUT 4
SDI OUT 1
SDI OUT 2
SDI OUT 3
SDI OUT 4
RM20-9068-A
Format Converters Selection Guide
Specifications Reference Video Input
Electrical Power:
18 watts
SD-SDI Input Number of Inputs: 1 Standard: SMPTE 259M Return Loss: >15 dB at 5 MHz - 1.485 GHz
Number of Inputs: 2 looping (openGear™ frame) Standard: Tri-level sync (SMPTE 274) and Black Burst (NTSC and PAL)
HD-SDI Output
Signal Level: Return Loss: Jitter:
800 mV nominal >15 dB at 5 MHz - 270 MHz >12 dB at 270 MHz - 1.485 GHz HD: < 0.15 UI
Number of Outputs: 4 reclocked 4 processed Standard: SMPTE 292
Sales 800 669 1691 / Direct 217 344 1243 / Fax 217 344 1245 / www.cobaltdigital.com Specifications subject to change without notice. E. & O.E. ©2010 Cobalt Digital Inc.
4/2010
|
