Transcript
910M, 914M, 918M Compact Wheel Loaders
910M
914M
918M
Cat® C4.4 ACERT™
Cat C4.4 ACERT
Cat C4.4 ACERT
ISO 14396
74 kW (100 hp)
74 kW (100 hp)
86 kW (115 hp)
ISO 14396 (DIN)
74 kW (101 hp)
74 kW (101 hp)
86 kW (117 hp)
Bucket Capacity
1.3-1.9 m3 (1.7-2.5 yd3)
1.3-1.9 m3 (1.7-2.5 yd3)
1.3-1.9 m3 (1.7-2.5 yd3)
Full Turn Tip Load
5099 kg (11,237 lb)
5219 kg (11,503 lb)
5845 kg (12,883 lb)
Operating Weight
8257 kg (18,199 lb)
8720 kg (19,219 lb)
9489 kg (20,914 lb)
Engine Model* Maximum Rated Gross Power:
*Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Making Your Choice Easy Efficiently Powerful Experience hybrid like fuel efficiency with an intelligent hydrostatic power train and industry leading fuel savings through a lower maximum engine speed. Power when you need it with Power-on-Demand technology that increases power when needed for improved speed up a grade. Work Made Easy Move more with Caterpillar’s patented quick loading Performance Series buckets and Optimized Z-bar linkage. Multi-function work has never been so easy, with dedicated pumps for each system and a flow sharing implement valve. Simultaneously lift, steer and drive without compromise. Enjoy All Day Comfort Have a seat in the M Series Wheel Loader and enjoy excellent all around visibility, whisper quiet sound levels, and low-effort joystick controls while riding on a fully adjustable seat suspension. Customize Your Experience Meet your application requirements and individual preferences with Caterpillar’s industry first adjustable power train and implement response settings. Fine tune machine performance with adjustments at your fingertips through the soft touch button keypad. Configured for Success A complete range of optional equipment gives you the versatility to configure an M Series Wheel Loader to be successful in your business.
Contents Efficiently Powerful.............................................4
Work Made Easy .................................................6
Enjoy All Day Comfort .........................................8
Customize Your Experience .............................10
Configured for Success ...................................11
Serviceability and Customer Support ............12
Wheel Loader Specifications .........................13
Bucket Specifications ......................................19
Bucket Selection Tables ..................................29
Operating Specifications .................................31
Standard Equipment .........................................34
Optional Equipment...........................................35
2
The Cat 910M, 914M and 918M Wheel Loaders set the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a toolcarrier. A high torque, lower speed Cat C4.4 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final and Stage IV emission standards with a diesel oxidation catalyst designed to manage itself so you can concentrate on your work. Experience the new industry benchmark. 3
Efficiently Powerful Experience hybrid like fuel efficiency with more power when you need it.
Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system has been further enhanced to monitor operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.
Maximize Fuel Efficiency Eco Mode allows you to choose between maximum fuel efficiency and boosted hydraulic speed.
Eco Mode • Enabled at the push of a button (Eco). • Saves up to 5% fuel consumption compared to Standard Mode. Biggest gains seen during load and carry, snow removal and roading applications. • Intelligent Hystat maintains maximum ground speed capability.
Standard Mode • Boosts engine speed by over 20%. • Increases hydraulic cycle times and productivity. • Recommended when working on grades or in applications requiring hydro mechanical work tools. 4
Four Cylinders of Efficient Power The Cat C4.4 ACERT engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, lower speed design. The engine meets Tier 4 Final and Stage IV emission requirements with a clean emissions module that is designed to manage itself so you can concentrate on your work. • No downtime required with a self-managing aftertreatment system that keeps you on the job. • Extended fluid fill intervals with minimal use of Diesel Exhaust Fluid (DEF) also known as Adblue with up to six fuel tank fills per DEF fill. • Configurable auto idle shut down based on time and ambient temperature to further reduce fuel burn and keep operating costs low.
Power to the Ground Lock up and go with fully locking front and rear differential axles that can be engaged on the move at full torque with the pull of a trigger on the multifunction joystick to keep you climbing. Independent service brakes on front and rear axles provide robust stopping performance while a mechanical park brake allows you to safely secure the machine with ease.
5
Work Made Easy Getting the job done.
Optimized Z-bar Linkage The Caterpillar patented optimized Z-bar linkage combines the digging efficiency of a traditional Z-bar with integrated toolcarrier capabilities for great performance and versatility. • Parallelism functionality built into linkage geometry gives truly predictable performance while high tilt forces throughout the working range help you safely and confidently handle loads with precise control. • Visibility to bucket corners and fork tips at ground level remain excellent while sight lines at full lift are maximized. • Lift higher and reach further with optional High Lift linkage available on the 910M and 914M.
6
Quick Loading Performance Series Buckets Performance Series Buckets deliver up to 10% higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a longer floor to take a bigger bite of the pile, an open throat to heap higher and curved side bars to help with material retention.
Smooth and Predictable Multi-Function Performance M Series machines feature an electro-hydraulic control system that is governed by the Intelligent Power Management system for peak efficiency. The load-sensing, variable flow system senses work demand and adjusts flow and pressure to match the operators request. • Multi-Function without compromise through dedicated hydraulic systems featuring one pump for the Intelligent Hydrostatic drive, a second pump for the implements, and a third pump for the steering system. Drive, Lift and Steer simultaneously with smooth predictable control. The M Series simply does what you ask it to. • Programmable in-cab kick-outs on the 918M are easy to set on the go for tilt and lift. This feature is ideal for applications where the work cycle is repeatable allowing you to quickly return to programed set points. • Effortless hydro-mechanical work tool operation with creep control, throttle lock, and continuous flow. This allows the operator to lock in ground speed, engine speed, and auxiliary flow and focus only on steering the machine.
7
Enjoy All Day Comfort Best seat on your job site.
Have a Seat and Experience: • Electro-hydraulic controls featuring a low effort joystick for lift and tilt functions along with integrated Forward/Neutral/ Reverse switch, differential lock trigger and optional third and fourth auxiliary functions. • Superior all around visibility with a pillarless front windshield, internal and external mirrors, clean hydraulic lines routing, as well as in-line engine mounting for exceptional rear visibility. • Climate controlled cab with heated rear glass and multiple air vents for a quick defrost. • Fully adjustable controls including steering column, arm rest and seat suspension. • Information at a glance with large LCD display on front console. • An extra eye on the job site with optional rearview camera capability. • A heated seat option for added comfort in cold weather climates.
8
Enjoy Coming to Work with: • A spacious, safe, quiet operator environment featuring ergonomic controls and optional radio with an MP3 and USB port. • Quickly customizable machine operation with the optional eight button keypad to allow real time adjustments to machine features. • Comfortable soft stops at cylinder end stroke conditions and programmed kickout points with Caterpillar’s exclusive electro hydraulic cylinder snubbing*. • An even smoother ride with optional Ride Control when working unloaded and loaded with excellent material retention. • Early starts and late finishes are made easier with optional LED lighting package. • Dual door access allowing for easy entry in tight working conditions. *Cylinder snubbing on 918M only.
9
Customizable Hydraulic Response Easily customize the hydraulic performance through the keypad to optimize your efficiency. • Operator can tune the machine for slower operation to do fine grading or faster operation such as high productivity agricultural applications. • Fully adjustable ride control activation speed (through Electronic Technician – ET). • Control auxiliary work tool operation with proportional 3rd and 4th function auxiliary flows via thumb rollers.
Customize Your Experience
Make it yours. Work as one with your machine by easily adjusting the power train and hydraulics to meet your personal preferences or application requirements.
Flexible Power Train A smooth, step-less electronically controlled hydrostatic transmission provides adjustable power to the ground with excellent groundspeed control and customizable feel. • Select your directional shift response based on application and operator preference. This setting adjusts the rollout characteristics when shifting from Forward, Neutral, and Reverse. • Reduce tire wear using rimpull control which enables you to match available tractive power to underfoot conditions. • Fine tune ground speed when using work tools such as brooms, snow blowers and brush cutters with Creeper Control.
Machine Coded Start • The M Series Wheel Loaders offer an additional level of security with coded start option. This allows the owner to set up multiple four or six digit security codes that enable the machine to start.
10
Configured for Success
Ready to work for you. The Way You Want It A variety of options are available on the Cat M Series Wheel Loaders to suit your specific application needs.
1
2
Other Options:
3
1) 2) 3) 4) 5) 6) 7) 8)
1
3
4 5
Auxiliary lights: LED or Halogen Beacon Rearview camera with display* Auxiliary hydraulics: 3rd and 4th function Front attachment Coupler: IT and ISO Fenders Battery: standard or heavy duty
*Standard equipment in Europe.
8
6 7
Front Attachment Options: 1) 2) 3) 4) 5)
1
2
Straight Snow Push Snow Plow Material Handling Arm Flat Floor Bucket Angle Broom
…and many, many more!
4
5
3
11
Service Schedule your downtime to maximize your up time.
Get up and running quickly with ground level, daily service access. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include: • Product Link™ with subscription to VisionLink® to monitor your machine remotely. • Quick fuel filter service with Caterpillar’s exclusive electric fuel priming pump. • Extended cleanouts with single plane cooling system and wide spaced eight fins per inch coolers as standard. • Easy battery terminal access for jump starts. • Eco drain valve avoids costly fluid spills when servicing the machine.
Customer Support Unmatched service makes the difference.
Renowned Cat Dealer Support Rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs. Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements. Let us earn your business. Experience an M Series Wheel Loader and join the Caterpillar family.
12
910M, 914M, 918M Compact Wheel Loaders Specifications
Engine
Cat C4.4 ACERT Maximum Rated Gross Power Maximum Engine Speed SAE J1995 ISO 14396 ISO 14396 (DIN) Rated Net Power SAE J1349 ISO 9249 ISO 9249 (DIN) Maximum Gross Torque SAE J1995 ISO 14396 Maximum Net Torque SAE J1349 ISO 9249 Displacement Bore Stroke
910M
914M
918M
2,350 rpm 76 kW 102 hp 74 kW 100 hp 74 kW 101 hp 2,200 rpm 72 kW 96 hp 72 kW 97 hp 72 kW 98 hp
2,350 rpm 76 kW 102 hp 74 kW 100 hp 74 kW 101 hp 2,200 rpm 72 kW 96 hp 72 kW 97 hp 72 kW 98 hp
2,350 rpm 87 kW 117 hp 86 kW 115 hp 86 kW 117 hp 2,200 rpm 83 kW 112 hp 84 kW 113 hp 84 kW 114 hp
455 N·m 450 N·m
336 lbf-ft 332 lbf-ft
455 N·m 450 N·m
336 lbf-ft 332 lbf-ft
504 N·m 500 N·m
372 lbf-ft 369 lbf-ft
441 N·m 446 N·m 4.4 L 105 mm 127 mm
325 lbf-ft 329 lbf-ft 268 in3 4.13 in 5 in
441 N·m 446 N·m 4.4 L 105 mm 127 mm
325 lbf-ft 329 lbf-ft 268 in3 4.13 in 5 in
490 N·m 495 N·m 4.4 L 105 mm 127 mm
361 lbf-ft 365 lbf-ft 268 in3 4.13 in 5 in
• Net power ratings are tested at the reference conditions for the specified standard. • Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. • The Cat C4.4 ACERT engine meets Tier 4 Final/Stage IV off-highway emission standards.
Engine Torque
910M/914M
918M
lbf-ft N·m 550 350
250
kW 100
hp 120
450
80
350
60
250
350
80
250
40
150
1,000
1,200
1,400
1,600
1,800
2,000
20 2,200 rpm
kW 100
hp 120
450
80
350
60
250
40 Power Torque
150 150 800
lbf-ft N·m 550
40 Power Torque
150 800
80
1,000
1,200
1,400
1,600
1,800
2,000
40 20 2,200 rpm
Cab • ROPS: ISO 3471:2008. • FOPS: ISO 3449:2005 Level II. • The declared dynamic operator around pressures levels per ISO 6396:2008*, when properly installed and maintained, is 75 dB(A). • The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). *The measurements were conducted with the cab doors and windows closed.
13
910M, 914M, 918M Wheel Loader Specifications
Loader Hydraulic System
• 910M implement system is open center control with the use of a gear pump. • 914M and 918M implement system uses a dedicated load sensing variable displacement pump. • Loader linkage utilizes dual double acting lift cylinders and a single double acting tilt cylinder.
Maximum Flow – Implement Pump 3rd Function, Maximum Flow, Standard 3rd Function, Maximum Flow, High 4th Function, Maximum Flow Maximum Working Pressure – Implement Pump Relief Pressure – Tilt Cylinder 3rd and 4th Function Maximum Working Pressure 3rd and 4th Function Relief Pressure Lift Cylinder: Double Acting Bore Diameter Rod Diameter Stroke Tilt Cylinder: Double Acting Bore Diameter Rod Diameter Stroke Cycle Times Raise (ground level to maximum lift) Dump (at maximum lift height) Rack Back Float Down (maximum lift to ground level) Total Cycle Time
910M 122 L/min 32 gal/min 90 L/min 24 gal/min N/A N/A 90 L/min 24 gal/min 23 500 kPa 3,408 psi 34 000 kPa 4,931 psi 21 000 kPa 3,046 psi 28 000 kPa 4,061 psi
914M 148 L/min 39 gal/min 90 L/min 24 gal/min 120 L/min 32 gal/min 90 L/min 24 gal/min 28 000 kPa 4,061 psi 34 000 kPa 4,931 psi 21 000 kPa 3,046 psi 28 000 kPa 4,061 psi
918M 165 L/min 44 gal/min 95 L/min 25 gal/min 150 L/min 40 gal/min 95 L/min 25 gal/min 28 000 kPa 4,061 psi 32 000 kPa 4,641 psi 32 000 kPa 4,641 psi 32 000 kPa 4,641 psi
100 mm 60 mm 593 mm
3.9 in 2.4 in 23.3 in
100 mm 60 mm 593 mm
3.9 in 2.4 in 23.3 in
100 mm 60 mm 547 mm
3.9 in 2.4 in 21.5 in
100 mm 60 mm 578 mm
3.9 in 2.4 in 22.8 in
100 mm 60 mm 578 mm
3.9 in 2.4 in 22.8 in
110 mm 60 mm 581 mm
4.3 in 2.4 in 22.9 in
5.2 seconds 1.4 seconds 2.2 seconds 3.7 seconds 12.5 seconds
5.2 seconds 1.4 seconds 2.2 seconds 3.7 seconds 12.5 seconds
4.8 seconds 1.8 seconds 2.2 seconds 2.7 seconds 11.5 seconds
Power Train
• Differential lock can be engaged on the go at full torque up to 2.5 km/h (1.6 mph) and stays active up to 10 km/h (6.3 mph).
Front Axle Traction Aid** Rear Axle Oscillation Traction aid Brakes Service Park
14
910M Fixed Locking differential (std.) Oscillating ± 11° Locking differential (std.)
914M Fixed Locking differential (std.) Oscillating ± 11° Locking differential (std.)
918M Fixed Locking differential (std.) Oscillating ± 11° Locking differential (std.)
Inboard wet disc Cable applied, spring released
Inboard wet disc Cable applied, spring released
Inboard wet disc Cable applied, spring released
910M, 914M, 918M Wheel Loader Specifications
Steering
• 910M steering system used a gear pump with priority flow control. • 914M and 918M steering system uses a dedicated load sensing variable displacement pump. • Steering system utilizes dual double acting steering cylinders.
Steering Articulation Angle (each direction) Steering Cylinder: Double Acting Bore Diameter Rod Diameter Stroke Maximum Flow – Steering Pump Maximum Working Pressure – Steering Pump Maximum Steering Torque 0° (straight machine) 40° (full turn) Steering Cycle Times (full left to full right) At 2,350 rpm: 90 rpm Steering Wheel Speed Number of Steering Wheel Turns Full Left to Full Right or Full Right to Full Left
910M 40°
914M 40°
918M 40°
60 mm 35 mm 400 mm 66 L/min 18 500 kPa
2.4 in 1.4 in 15.7 in 17 gal/min 2,683 psi
60 mm 35 mm 400 mm 82 L/min 22 500 kPa
2.4 in 1.4 in 15.7 in 22 gal/min 3,263 psi
60 mm 35 mm 400 mm 82 L/min 20 000 kPa
2.4 in 1.4 in 15.7 in 22 gal/min 2,901 psi
50 375 N·m 37 620 N·m
37,155 lbf-ft 27,747 lbf-ft
50 375 N·m 37 620 N·m
37,155 lbf-ft 27,747 lbf-ft
57 630 N·m 42 570 N·m
42,506 lbf-ft 31,398 lbf-ft
3.2 seconds
2.8 seconds
2.3 seconds
3.75 turns
3.75 turns
3.4 turns
Transmission
* Creeper control allows for speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
910M Forward and Reverse Low Range, Speed Range 1* Low Range, Speed Range 2 High Range (optional)
10 km/h 20 km/h 40 km/h
914M 6.3 mph 12.5 mph 25 mph
10 km/h 20 km/h 40 km/h
918M 6.3 mph 12.5 mph 25 mph
10 km/h 20 km/h 40 km/h
6.3 mph 12.5 mph 25 mph
Service Refill Capacities
• DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. 910M Fuel Tank Cooling System Engine Crankcase Front Axles Rear Axles Hydraulic System (including tank) Hydraulic Tank Transmission Diesel Exhaust Fluid (DEF) Tank
154 L 21.5 L 8.8 L 7.5 L 7.5 L 98 L 55 L 3.4 L 18.9 L
914M 40.7 gal 5.7 gal 2.3 gal 2 gal 2 gal 25.9 gal 14.5 gal 0.9 gal 5 gal
154 L 21.5 L 8.8 L 7.5 L 7.5 L 98 L 55 L 3.4 L 18.9 L
918M 40.7 gal 5.7 gal 2.3 gal 2 gal 2 gal 25.9 gal 14.5 gal 0.9 gal 5 gal
154 L 21.5 L 8.8 L 17 L 17 L 98 L 55 L 3.4 L 18.9 L
40.7 gal 5.7 gal 2.3 gal 4.5 gal 4.5 gal 25.9 gal 14.5 gal 0.9 gal 5 gal
15
910M, 914M, 918M Wheel Loader Specifications
Dimensions with Bucket
All dimensions are approximate. Dimensions will vary with bucket, and tire choice. Refer to Operating Specifications with Buckets.
23
17
19
24
13
14 21
12
11
1
10
2
22
9 27
25
16
26
4
15
3
6
7
18
8
20
5
*Vary with bucket. **Vary with tire.
910M
High Lift – Pin On
Standard Lift – Pin On
914M
918M
910M
914M
mm 3020
ft/in 9'10"
mm 3093
ft/in 10'1"
mm 3110
ft/in 10'2"
mm 3020
ft/in 9'10"
mm 3093
ft/in 10'1"
3210
10'6"
3283
10'9"
3300
10'9"
3210
10'6"
3283
10'9"
600
1'11"
640
2'1"
640
2'1"
600
1'11"
640
2'1"
348
1'1"
405
1'3"
438
1'5"
348
1'1"
405
1'3"
* 5 Length: Overall
6 Length: Rear Axle to Bumper
6226
20'5"
6291
20'7"
6617
21'8"
6758
22'2"
6834
22'5"
1590
5'2"
1600
5'2"
1615
5'3"
1590
5'2"
1600
5'2"
7 Length: Hitch to Front Axle
8 Length: Wheel Base
1300
4'3"
1300
4'3"
1350
4'5"
1300
4'3"
1300
4'3"
2600
8'6"
2600
8'6"
2700
8'10"
2600
8'6"
2600
8'6"
* 9 Clearance: Bucket at 45°
** 10 Clearance: Load over Height
2846
9'4"
2820
9'3"
2857
9'4"
3219
10'6"
3188
10'5"
3284
10'9"
3315
10'10"
3381
11'1"
3397
11'1"
3429
11'2"
** 11 Clearance: Level Bucket
** 12 Height: Bucket Pin
3419
11'2"
3447
11'3"
3563
11'8"
3775
12'4"
3800
12'5"
3673
12'0"
3701
12'1"
3818
12'6"
4030
13'2"
4055
13'3"
** 13 Height: Overall
* 14 Reach: Bucket at 45°
4534
14'10"
4621
15'1"
4859
15'11"
4891
16'0"
4974
16'3"
759
2'5"
790
2'7"
902
2'11"
1004
3'3"
1029
3'4"
15 Carry Height: Bucket Pin
** 16 Dig Depth
319
1'0"
317
1'0"
353
1'1"
480
1'6"
483
1'6" 10.7"
** 1 Height: Ground to Cab
** 2 Height: Ground to Beacon
** 3 Height: Ground Axle Center
** 4 Height: Ground Clearance
116
4.5"
89
3.4"
60
2.3"
294
11.5"
272
17 Width: Bucket
18 Width: Tread Center
2401
7'10"
2401
7'10"
2401
7'10"
2401
7'10"
2401
7'10"
1800
5'10"
1800
5'10"
1800
5'10"
1800
5'10"
1800
5'10"
19 Turning Radius: Over Bucket
20 Width: Over Tires
5180
16'11"
5200
17'0"
5400
17'8"
5419
17'9"
5448
17'10"
2259
7'4"
2259
7'4"
2259
7'4"
2259
7'4"
2259
7'4"
21 Turning Radius: Outside of Tires
22 Turning Radius: Inside of Tires
4716
15'5"
4741
15'6"
4877
16'0"
4716
15'5"
4741
15'6"
2446
8'0"
2426
7'11"
2563
8'4"
2446
8'0"
2426
7'11"
23 Rack Angle at Full Lift
24 Dump Angle at Full Lift
57°
57°
55°
47°
48°
47°
43°
44°
25 Rack Angle at Carry
26 Departure Angle
42°
41°
44°
50°
49°
33°
33°
33°
33°
33°
27 Articulation Angle
Operating Weight
40° kg 7917
lb 17,450
40° kg 8380
lb 18,469
59°
40°
kg 9318
lb 20,537
59°
40° kg 8482
lb 18,693
40° kg 8906
lb 19,629
Dimensions listed are for a machine configured with general purpose Pin On bucket, bolt-on cutting edge, optional counterweights, standard guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires for 910M and Michelin 17.5 R25 (L2) XTLA tires for 914M and 918M.
16
910M, 914M, 918M Wheel Loader Specifications
Dimensions with Bucket
All dimensions are approximate. Dimensions will vary with bucket, and tire choice. Refer to Operating Specifications with Buckets.
23
17
19
24
13
14 21
12
11
1
10
2
22
9 27
25
16
26
4
15
3
6
7
18
8
20
5
*Vary with bucket. **Vary with tire.
910M
High Lift – IT
Standard Lift – IT
914M
918M
910M
914M
mm 3020
ft/in 9'10"
mm 3093
ft/in 10'1"
mm 3110
ft/in 10'2"
mm 3020
ft/in 9'10"
mm 3093
ft/in 10'1"
3210
10'6"
3283
10'9"
3300
10'9"
3210
10'6"
3283
10'9"
600
1'11"
640
2'1"
640
2'1"
600
1'11"
640
2'1"
348
1'1"
405
1'3"
438
1'5"
348
1'1"
405
1'3"
* 5 Length: Overall
6 Length: Rear Axle to Bumper
6373
20'10"
6433
21'1"
6719
22'0"
6825
22'4"
6905
22'7"
1590
5'2"
1600
5'2"
1615
5'3"
1590
5'2"
1600
5'2"
7 Length: Hitch to Front Axle
8 Length: Wheel Base
1300
4'3"
1300
4'3"
1350
4'5"
1300
4'3"
1300
4'3"
2600
8'6"
2600
8'6"
2700
8'10"
2600
8'6"
2600
8'6"
* 9 Clearance: Bucket at 45°
** 10 Clearance: Load over Height
2747
9'0"
2722
8'11"
2780
9'1"
3176
10'5"
3141
10'3"
3284
10'9"
3315
10'10"
3381
11'1"
3397
11'1"
3429
11'2"
** 11 Clearance: Level Bucket
** 12 Height: Bucket Pin
3418
11'2"
3446
11'3"
3563
11'8"
3774
12'4"
3800
12'5"
3673
12'0"
3701
12'1"
3818
12'6"
4030
13'2"
4055
13'3"
** 13 Height: Overall
* 14 Reach: Bucket at 45°
4646
15'2"
4731
15'6"
4928
16'1"
4920
16'1"
5027
16'5"
867
2'10"
891
2'11"
966
3'2"
1054
3'5"
1083
3'6"
15 Carry Height: Bucket Pin
** 16 Dig Depth
319
1'0"
317
1'0"
353
1'1"
480
1'6"
483
1'6" 10.7"
** 1 Height: Ground to Cab
** 2 Height: Ground to Beacon
** 3 Height: Ground Axle Center
** 4 Height: Ground Clearance
116
4.5"
90
3.5"
60
2.3"
295
11.6"
273
17 Width: Bucket
18 Width: Tread Center
2401
7'10"
2401
7'10"
2401
7'10"
2401
7'10"
2401
7'10"
1800
5'10"
1800
5'10"
1800
5'10"
1800
5'10"
1800
5'10"
19 Turning Radius: Over Bucket
20 Width: Over Tires
5223
17'1"
5244
17'2"
5434
17'9"
5440
17'10"
5471
17'11"
2259
7'4"
2259
7'4"
2259
7'4"
2259
7'4"
2259
7'4"
21 Turning Radius: Outside of Tires
22 Turning Radius: Inside of Tires
2397
7'10"
2507
8'2"
2402
7'10"
2397
7'10"
2507
8'2"
2017
6'7"
2126
6'11"
2031
6'7"
2017
6'7"
2126
6'11"
23 Rack Angle at Full Lift
24 Dump Angle at Full Lift
57°
57°
54°
47°
47°
47°
44°
44°
25 Rack Angle at Carry
26 Departure Angle
42°
41°
43°
50°
49°
33°
33°
33°
33°
33°
27 Articulation Angle
Operating Weight
40° kg 8297
lb 18,286
40° kg 8754
lb 19,294
59°
40°
kg 9543
lb 21,032
59°
40° kg 8821
lb 19,442
40° kg 9095
lb 20,044
Dimensions listed are for a machine configured with general purpose IT bucket, bolt-on cutting edge, optional counterweights, standard guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires for 910M and Michelin 17.5 R25 (L2) XTLA tires for 914M and 918M.
17
910M, 914M, 918M Wheel Loader Specifications
Dimensions with Bucket
All dimensions are approximate. Dimensions will vary with bucket, and tire choice. Refer to Operating Specifications with Buckets.
23
17
19
24
13
14 21
12
11
1
10
2
22
9 27
25
16
26
4
15
3
6
7
18
8
20
5
*Vary with bucket. **Vary with tire.
910M
High Lift – ISO
Standard Lift – ISO
914M
918M
910M
914M
mm 3020
ft/in 9'10"
mm 3093
ft/in 10'1"
mm 3110
ft/in 10'2"
mm 3020
ft/in 9'10"
mm 3093
ft/in 10'1"
3210
10'6"
3283
10'9"
3300
10'9"
3210
10'6"
3283
10'9"
600
1'11"
640
2'1"
640
2'1"
600
1'11"
640
2'1"
348
1'1"
405
1'3"
438
1'5"
348
1'1"
405
1'3"
* 5 Length: Overall
6 Length: Rear Axle to Bumper
6429
21'1"
6489
21'3"
6768
22'2"
6882
22'6"
6962
22'10"
1590
5'2"
1600
5'2"
1615
5'3"
1590
5'2"
1600
5'2"
7 Length: Hitch to Front Axle
8 Length: Wheel Base
1300
4'3"
1300
4'3"
1350
4'5"
1300
4'3"
1300
4'3"
2600
8'6"
2600
8'6"
2700
8'10"
2600
8'6"
2600
8'6"
* 9 Clearance: Bucket at 45°
** 10 Clearance: Load over Height
2709
8'10"
2684
8'9"
2754
9'0"
3140
10'3"
3105
10'2"
3284
10'9"
3315
10'10"
3381
11'1"
3397
11'1"
3429
11'2"
** 11 Clearance: Level Bucket
** 12 Height: Bucket Pin
3418
11'2"
3446
11'3"
3564
11'8"
3774
12'4"
3799
12'5"
3673
12'0"
3701
12'1"
3818
12'6"
4030
13'2"
4055
13'3"
** 13 Height: Overall
* 14 Reach: Bucket at 45°
4667
15'3"
4765
15'7"
4962
16'3"
4955
16'3"
5048
16'6"
909
2'11"
933
3'0"
1013
3'3"
1100
3'7"
1127
3'8"
15 Carry Height: Bucket Pin
** 16 Dig Depth
317
1'0"
322
1'0"
345
1'1"
448
1'5"
455
1'5" 10.7"
** 1 Height: Ground to Cab
** 2 Height: Ground to Beacon
** 3 Height: Ground Axle Center
** 4 Height: Ground Clearance
117
4.5"
90
3.5"
60
2.3"
295
11.6"
273
17 Width: Bucket
18 Width: Tread Center
2401
7'10"
2401
7'10"
2401
7'10"
2401
7'10"
2401
7'10"
1800
5'10"
1800
5'10"
1800
5'10"
1800
5'10"
1800
5'10"
19 Turning Radius: Over Bucket
20 Width: Over Tires
5239
17'2"
5262
17'3"
5445
17'10"
5452
17'10"
5484
17'11"
2259
7'4"
2259
7'4"
2259
7'4"
2259
7'4"
2259
7'4"
21 Turning Radius: Outside of Tires
22 Turning Radius: Inside of Tires
2395
7'10"
2492
8'2"
2376
7'9"
2395
7'10"
2492
8'2"
2015
6'7"
2110
6'11"
2004
6'6"
2015
6'7"
2110
6'11"
23 Rack Angle at Full Lift
24 Dump Angle at Full Lift
57°
57°
55°
47°
47°
47°
44°
44°
25 Rack Angle at Carry
26 Departure Angle
43°
41°
43°
49°
48°
33°
33°
33°
33°
33°
27 Articulation Angle
Operating Weight
40° kg 8318
lb 18,333
40° kg 8776
lb 19,342
60°
40°
kg 9565
lb 21,082
59°
40° kg 8844
lb 19,491
40° kg 9116
lb 20,091
Dimensions listed are for a machine configured with general purpose ISO bucket, bolt-on cutting edge, optional counterweights, standard guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires for 910M and Michelin 17.5 R25 (L2) XTLA tires for 914M and 918M.
18
Bucket Specifications
910M Operating Specifications with Buckets
Standard Lift – General Purpose
Pin On Rated Capacity 100% (including BOCE) Rated Capacity 110% (including BOCE) Struck Capacity 17 Width: Bucket Nominal Material Density, 100% Fill Factor Nominal Material Density, 110% Fill Factor 9 Clearance: Full Lift, 45° Dump 14 Reach: Full Lift, 45° Dump Reach: 2130 mm (7'0") Clearance, 45° Dump Reach: Level Arm, Level Bucket 16 Dig Depth 5 Length: Overall 13 Height: Overall 19 Turning Radius: Bucket at Carry Tipping Load – Straight, ISO 14397-1* Tipping Load – Straight, Rigid Tire** Tipping Load – Full Turn, ISO 14397-1* Tipping Load – Full Turn, Rigid Tire** Breakout Force Operating Weight
3
m yd3 m3 yd3 m3 yd3 mm ft/in kg/m3 lb/yd3 kg/m3 lb/yd3 mm ft/in mm ft/in mm ft/in mm ft/in mm in mm ft/in mm ft/in mm ft/in kg lb kg lb kg lb kg lb kgf lbf kg lb
1.4 1.8 1.5 2.0 1.25 1.6 2401 7'10" 1829 3,135 1707 3,002 2846 9'4" 759 2'5" 1338 4'4" 2026 6'7" 116 4.5" 6226 20'5" 4534 14'10" 5180 16'11" 6036 13,302 6287 13,856 5121 11,286 5448 12,007 7326 16,146 7917 17,450
1.6 2.1 1.7 2.2 1.45 1.9 2401 7'10" 1578 2,650 1485 2,691 2792 9'1" 811 2'7" 1361 4'5" 2101 6'10" 116 4.5" 6301 20'8" 4593 15'0" 5202 17'0" 5959 13,132 6207 13,681 5051 11,131 5373 11,841 6691 14,745 7956 17,535
IT 1.8 2.4 1.9 2.5 1.65 2.2 2401 7'10" 1385 2,289 1312 2,337 2738 8'11" 858 2'9" 1377 4'6" 2175 7'1" 116 4.6" 6375 20'10" 4681 15'4" 5224 17'1" 5887 12,975 6132 13,515 4984 10,985 5303 11,686 6162 13,580 7992 17,613
1.3 1.7 1.4 1.8 1.15 1.5 2401 7'10" 1939 3,269 1801 3,284 2809 9'2" 820 2'8" 1380 4'6" 2092 6'10" 117 4.6" 6293 20'7" 4563 14'11" 5199 17'0" 5972 13,162 6221 13,710 5042 11,113 5364 11,822 6739 14,853 8257 18,199
1.5 2.0 1.6 2.1 1.35 1.8 2401 7'10" 1657 2,739 1554 2,775 2747 9'0" 867 2'10" 1392 4'6" 2172 7'1" 116 4.6" 6373 20'10" 4646 15'2" 5223 17'1" 5895 12,992 6141 13,534 4971 10,957 5289 11,656 6156 13,567 8297 18,286
1.6 2.1 1.7 2.2 1.45 1.9 2401 7'10" 1544 2,593 1453 2,633 2721 8'11" 888 2'10" 1397 4'7" 2207 7'2" 116 4.6" 6407 21'0" 4653 15'3" 5234 17'2" 5862 12,920 6106 13,458 4941 10,890 5257 11,585 5933 13,077 8313 18,321
1.7 2.2 1.8 2.4 1.55 2.0 2401 7'10" 1443 2,458 1363 2,397 2694 8'10" 910 2'11" 1402 4'7" 2243 7'4" 117 4.6" 6444 21'1" 4703 15'5" 5245 17'2" 5825 12,838 6068 13,373 4907 10,815 5220 11,505 5715 12,595 8331 18,360
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. Dimensions listed are for a 910M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
19
Bucket Specifications
910M Operating Specifications with Buckets
Standard Lift – General Purpose
ISO 23727 Rated Capacity 100% (including BOCE) Rated Capacity 110% (including BOCE) Struck Capacity 17 Width: Bucket Nominal Material Density, 100% Fill Factor Nominal Material Density, 110% Fill Factor 9 Clearance: Full Lift, 45° Dump 14 Reach: Full Lift, 45° Dump Reach: 2130 mm (7'0") Clearance, 45° Dump Reach: Level Arm, Level Bucket 16 Dig Depth 5 Length: Overall 13 Height: Overall 19 Turning Radius: Bucket at Carry Tipping Load – Straight, ISO 14397-1* Tipping Load – Straight, Rigid Tire** Tipping Load – Full Turn, ISO 14397-1* Tipping Load – Full Turn, Rigid Tire** Breakout Force Operating Weight
3
m yd3 m3 yd3 m3 yd3 mm ft/in kg/m3 lb/yd3 kg/m3 lb/yd3 mm ft/in mm ft/in mm ft/in mm ft/in mm in mm ft/in mm ft/in mm ft/in kg lb kg lb kg lb kg lb kgf lbf kg lb
1.3 1.7 1.4 1.8 1.15 1.5 2401 7'10" 1892 3,189 1757 3,204 2772 9'1" 863 2'9" 1403 4'7" 2149 7'0" 117 4.6" 6350 20'10" 4599 15'1" 5216 17'1" 5833 12,857 6077 13,392 4920 10,844 5234 11,536 6297 13,877 8280 18,248
1.5 2.0 1.6 2.1 1.35 1.8 2401 7'10" 1617 2,673 1516 2,708 2709 8'10" 909 2'11" 1411 4'7" 2228 7'3" 117 4.6" 6429 21'1" 4667 15'3" 5239 17'2" 5759 12,692 5999 13,221 4852 10,693 5161 11,375 5785 12,750 8318 18,333
ISO Flat Floor 1.7 2.2 1.8 2.4 1.55 2.0 2401 7'10" 1405 2,392 1327 2,333 2656 8'8" 952 3'1" 1420 4'7" 2298 7'6" 117 4.6" 6499 21'3" 4737 15'6" 5261 17'3" 5678 12,513 5914 13,034 4776 10,526 5081 11,198 5304 11,690 8352 18,408
1.5 2.0 1.6 2.1 1.0 1.3 2401 7'10" 1584 2,619 1485 2,644 2759 9'0" 970 3'2" 1502 4'11" 2227 7'3" 115 4.5" 6426 21'0" 4675 15'4" 5239 17'2" 5658 12,469 5894 12,989 4753 10,475 5038 11,103 5689 12,538 8399 18,510
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. Dimensions listed are for a 910M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
20
1.6 2.1 1.7 2.2 1.1 1.4 2401 7'10" 1477 2,481 1390 2,510 2945 9'7" 1192 3'10" 1821 5'11" 2259 7'4" 115 4.5" 6459 21'2" 4697 15'4" 5249 17'2" 5631 12,409 5865 12,926 4728 10,419 5011 11,044 5467 12,048 8414 18,543
Bucket Specifications
910M Operating Specifications with Buckets
High Lift – General Purpose
Pin On Rated Capacity 100% (including BOCE) Rated Capacity 110% (including BOCE) Struck Capacity 17 Width: Bucket Nominal Material Density, 100% Fill Factor Nominal Material Density, 110% Fill Factor 9 Clearance: Full Lift, 45° Dump 14 Reach: Full Lift, 45° Dump Reach: 2130 mm (7'0") Clearance, 45° Dump Reach: Level Arm, Level Bucket 16 Dig Depth 5 Length: Overall 13 Height: Overall 19 Turning Radius: Bucket at Carry Tipping Load – Straight, ISO 14397-1* Tipping Load – Straight, Rigid Tire** Tipping Load – Full Turn, ISO 14397-1* Tipping Load – Full Turn, Rigid Tire** Breakout Force Operating Weight
3
m yd3 m3 yd3 m3 yd3 mm ft/in kg/m3 lb/yd3 kg/m3 lb/yd3 mm ft/in mm ft/in mm ft/in mm ft/in mm in mm ft/in mm ft/in mm ft/in kg lb kg lb kg lb kg lb kgf lbf kg lb
1.4 1.8 1.5 2.0 1.25 1.6 2401 7'10" 1705 2,922 1591 2,798 3219 10'6" 1004 3'3" 1798 5'10" 2441 8'0" 294 11.6" 6758 22'2" 4891 16'0" 5419 17'9" 5677 12,511 5913 13,032 4773 10,519 5077 11,190 7391 16,289 8482 18,693
1.6 2.1 1.7 2.2 1.45 1.9 2401 7'10" 1473 2,474 1387 2,512 3171 10'4" 1061 3'5" 1826 5'11" 2516 8'3" 294 11.6" 6834 22'5" 4949 16'2" 5443 17'10" 5614 12,373 5848 12,889 4715 10,391 5016 11,054 6750 14,877 8521 18,779
1.8 2.4 1.9 2.5 1.65 2.2 2401 7'10" 1295 2,140 1226 2,185 3123 10'2" 1118 3'7" 1848 6'0" 2590 8'5" 294 11.6" 6907 22'7" 5037 16'6" 5466 17'11" 5556 12,244 5787 12,755 5660 10,271 4958 10,926 6217 13,702 8556 18,857
IT 1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1220 2,043 1159 2,090 3101 10'2" 1143 3'9" 1857 6'1" 2624 8'7" 294 11.6" 6941 22'9" 5071 16'7" 5476 17'11" 5529 12,186 5760 12,694 4636 10,217 4932 10,869 5997 13,217 8572 18,892
1.3 1.7 1.4 1.8 1.15 1.5 2401 7'10" 1803 3,039 1674 3,053 3176 10'5" 1054 3'5" 1843 6'0" 2507 8'2" 295 11.6" 6825 22'4" 4920 16'1" 5440 17'10" 5604 12,352 5838 12,866 4688 10,333 4988 10,992 6798 14,983 8821 19,442
1.5 2.0 1.6 2.1 1.35 1.8 2401 7'10" 1543 2,551 1447 2,585 3125 10'3" 1115 3'7" 1861 6'1" 2587 8'5" 295 11.6" 6905 22'7" 5002 16'4" 5465 17'11" 5542 12,213 5772 12,722 4630 10,204 4925 10,855 6210 13,687 8861 19,529
1.6 2.1 1.7 2.2 1.45 1.9 2401 7'10" 1439 2,416 1354 2,454 3102 10'2" 1142 3'8" 1870 6'1" 2621 8'7" 295 11.6" 6939 22'9" 5009 16'5" 5476 17'11" 5515 12,154 5745 12,661 4605 10,149 4899 10,797 5986 13,193 8877 19,564
1.7 2.2 1.8 2.4 1.55 2.0 2401 7'10" 1346 2,293 1271 2,235 3079 10'1" 1169 3'10" 1878 6'1" 2657 8'8" 295 11.6" 6976 22'10" 5059 16'7" 5487 18'0" 5484 12,087 5713 12,591 4577 10,087 4869 10,730 5766 12,707 8895 19,604
1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1183 1,982 1124 2,028 3026 9'11" 1208 3'11" 1881 6'2" 2725 8'11" 294 11.6" 7043 23'1" 5140 16'10" 5514 18'1" 5398 11,896 5623 12,392 4497 9,911 4784 10,544 5339 11,767 8949 19,722
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. Dimensions listed are for a 910M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
21
Bucket Specifications
910M Operating Specifications with Buckets
High Lift – General Purpose
ISO Flat Floor
ISO 23727 Rated Capacity 100% (including BOCE) Rated Capacity 110% (including BOCE) Struck Capacity 17 Width: Bucket Nominal Material Density, 100% Fill Factor Nominal Material Density, 110% Fill Factor 9 Clearance: Full Lift, 45° Dump 14 Reach: Full Lift, 45° Dump Reach: 2130 mm (7'0") Clearance, 45° Dump Reach: Level Arm, Level Bucket 16 Dig Depth 5 Length: Overall 13 Height: Overall 19 Turning Radius: Bucket at Carry Tipping Load – Straight, ISO 14397-1* Tipping Load – Straight, Rigid Tire** Tipping Load – Full Turn, ISO 14397-1* Tipping Load – Full Turn, Rigid Tire** Breakout Force Operating Weight
3
m yd3 m3 yd3 m3 yd3 mm ft/in kg/m3 lb/yd3 kg/m3 lb/yd3 mm ft/in mm ft/in mm ft/in mm ft/in mm in mm ft/in mm ft/in mm ft/in kg lb kg lb kg lb kg lb kgf lbf kg lb
1.3 1.7 1.4 1.8 1.15 1.5 2401 7'10" 1766 2,977 1640 2,991 3140 10'3" 1100 3'7" 1869 6'1" 2564 8'4" 295 11.6" 6882 22'6" 4955 16'3" 5452 17'10" 5496 12,112 5725 12,617 4593 10,122 4886 10,768 6349 13,994 8844 19,491
1.5 2.0 1.6 2.1 1.35 1.8 2401 7'10" 1512 2,499 1417 2,532 3090 10'1" 1160 3'9" 1884 6'2" 2643 8'8" 295 11.6" 6961 22'10" 5023 16'5" 5478 17'11" 5435 11,977 5661 12,476 4536 9,996 4825 10,634 5834 12,858 8882 19,576
1.7 2.2 1.8 2.4 1.55 2.0 2401 7'10" 1316 2,241 1243 2,186 3044 9'11" 1214 3'11" 1900 6'2" 2713 8'10" 295 11.6" 7031 23'0" 5094 16'8" 5500 18'0" 5370 11,834 5593 12,327 4475 9,862 4760 10,491 5350 11,791 8917 19,652
1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1158 1,940 1100 1,984 3004 9'10" 1259 4'1" 1915 6'3" 2775 9'1" 293 11.6" 7092 23'3" 5174 16'11" 5521 18'1" 5292 11,662 5512 12,148 4401 9,699 4682 10,318 5071 11,177 8971 19,771
1.5 2.0 1.6 2.1 1.0 1.3 2401 7'10" 1480 2,446 1387 2,470 3116 10'2" 1190 3'10" 1971 6'5" 2641 8'7" 294 11.6" 6959 22'9" 5031 16'6" 5478 17'11" 5337 11,762 5559 12,252 4440 9,785 4706 10,372 6250 13,773 8963 19,754
1.6 2.1 1.7 2.2 1.1 1.4 2401 7'10" 1381 2,319 1300 2,346 3302 10'9" 1411 4'7" 2272 7'5" 2674 8'9" 294 11.6" 6991 22'11" 5053 16'6" 5488 18'0" 5315 11,713 5536 12,201 4419 9,739 4684 10,323 6008 13,241 8978 19,787
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. Dimensions listed are for a 910M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
22
1.8 2.4 1.9 2.5 1.2 1.6 2401 7'10" 1211 2,001 1147 2,036 3022 9'10" 1237 4'0" 1909 6'3" 2746 9'0" 294 11.6" 7063 23'2" 5139 16'10" 5512 18'1" 5250 11,570 5468 12,052 4359 9,606 4620 10,182 5542 12,214 9019 19,877
Bucket Specifications
914M Operating Specifications with Buckets
Standard Lift – General Purpose
Pin On Rated Capacity 100% (including BOCE) Rated Capacity 110% (including BOCE) Struck Capacity 17 Width: Bucket Nominal Material Density, 100% Fill Factor Nominal Material Density, 110% Fill Factor 9 Clearance: Full Lift, 45° Dump 14 Reach: Full Lift, 45° Dump Reach: 2130 mm (7'0") Clearance, 45° Dump Reach: Level Arm, Level Bucket 16 Dig Depth 5 Length: Overall 13 Height: Overall 19 Turning Radius: Bucket at Carry Tipping Load – Straight, ISO 14397-1* Tipping Load – Straight, Rigid Tire** Tipping Load – Full Turn, ISO 14397-1* Tipping Load – Full Turn, Rigid Tire** Breakout Force Operating Weight
3
m yd3 m3 yd3 m3 yd3 mm ft/in kg/m3 lb/yd3 kg/m3 lb/yd3 mm ft/in mm ft/in mm ft/in mm ft/in mm in mm ft/in mm ft/in mm ft/in kg lb kg lb kg lb kg lb kgf lbf kg lb
1.4 1.8 1.5 2.0 1.15 1.5 2401 7'10" 1907 3,268 1779 3,129 2874 9'5" 737 2'5" 1327 4'4" 1996 6'6" 89 3.5" 6215 20'4" 4562 14'11" 5178 16'11" 6273 13,826 6535 14,402 5338 11,765 5679 12,516 8730 19,240 8341 18,383
1.6 2.1 1.7 2.2 1.45 1.9 2401 7'10" 1645 2,763 1549 2,806 2820 9'3" 790 2'7" 1352 4'5" 2072 6'9" 89 3.5" 6291 20'7" 4621 15'1" 5200 17'0" 6194 13,651 6452 14,220 5265 11,605 5602 12,345 7980 17,588 8380 18,469
1.8 2.4 1.9 2.5 1.65 2.2 2401 7'10" 1444 2,386 1368 2,437 2766 9'0" 838 2'8" 1370 4'5" 2146 7'0" 89 3.5" 6364 20'10" 4709 15'5" 5223 17'1" 6119 13,487 6374 14,049 5197 11,454 5529 12,185 7357 16,214 8415 18,547
IT 1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1359 2,277 1291 2,329 2741 8'11" 860 2'9" 1377 4'6" 2179 7'1" 89 3.5" 6398 20'11" 4743 15'6" 5233 17'2" 6086 13,412 6339 13,971 5166 11,385 5496 12,112 7100 15,647 8431 18,582
1.3 1.7 1.4 1.8 1.15 1.5 2401 7'10" 2021 3,406 1876 3,422 2838 9'3" 799 2'7" 1370 4'5" 2063 6'9" 90 3.5" 6282 20'7" 4591 15'0" 5198 17'0" 6204 13,674 6463 14,244 5254 11,579 5589 12,319 8043 17,726 8681 19,132
1.5 2.0 1.6 2.1 1.35 1.8 2401 7'10" 1727 2,855 1619 2,892 2775 9'1" 847 2'9" 1384 4'6" 2143 7'0" 89 3.5" 6362 20'10" 4674 15'4" 5222 17'1" 6125 13,498 6380 14,061 5181 11,418 5512 12,147 7355 16,209 8720 19,219
1.6 2.1 1.7 2.2 1.45 1.9 2401 7'10" 1609 2,702 1515 2,744 2749 9'0" 868 2'10" 1390 4'6" 2177 7'1" 89 3.5" 6397 20'11" 4681 15'4" 5232 17'2" 6091 13,423 6344 13,983 5150 11,349 5478 12,074 7092 15,631 8736 19,254
1.7 2.2 1.8 2.4 1.55 2.0 2401 7'10" 1504 2,562 1421 2,498 2722 8'11" 891 2'11" 1396 4'6" 2213 7'3" 90 3.5" 6433 21'1" 4731 15'6" 5244 17'2" 6052 13,339 6304 13,894 5114 11,271 5441 11,991 6835 15,064 8754 19,294
1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1320 2,212 1254 2,262 2664 8'8" 925 3'0" 1394 4'6" 2281 7'5" 88 3.5" 6500 21'3" 4811 15'9" 5268 17'3" 5946 13,104 6194 13,650 5017 11,058 5338 11,764 6319 13,926 8808 19,413
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. Dimensions listed are for a 914M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
23
Bucket Specifications
914M Operating Specifications with Buckets
Standard Lift – General Purpose
ISO 23727 Rated Capacity 100% (including BOCE) Rated Capacity 110% (including BOCE) Struck Capacity 17 Width: Bucket Nominal Material Density, 100% Fill Factor Nominal Material Density, 110% Fill Factor 9 Clearance: Full Lift, 45° Dump 14 Reach: Full Lift, 45° Dump Reach: 2130 mm (7'0") Clearance, 45° Dump Reach: Level Arm, Level Bucket 16 Dig Depth 5 Length: Overall 13 Height: Overall 19 Turning Radius: Bucket at Carry Tipping Load – Straight, ISO 14397-1* Tipping Load – Straight, Rigid Tire** Tipping Load – Full Turn, ISO 14397-1* Tipping Load – Full Turn, Rigid Tire** Breakout Force Operating Weight
3
m yd3 m3 yd3 m3 yd3 mm ft/in kg/m3 lb/yd3 kg/m3 lb/yd3 mm ft/in mm ft/in mm ft/in mm ft/in mm in mm ft/in mm ft/in mm ft/in kg lb kg lb kg lb kg lb kgf lbf kg lb
1.3 1.7 1.4 1.8 1.15 1.5 2401 7'10" 1972 3,324 1831 3,340 2800 9'2" 843 2'9" 1394 4'6" 2120 6'11" 90 3.5" 6340 20'9" 4627 15'2" 5216 17'1" 6062 13,359 6314 13,916 5128 11,302 5456 12,023 7525 16,585 8703 19,182
1.5 2.0 1.6 2.1 1.35 1.8 2401 7'10" 1686 2,787 1580 2,823 2738 8'11" 889 2'10" 1404 4'7" 2199 7'2" 90 3.5" 6419 21'0" 4695 15'4" 5240 17'2" 5984 13,189 6234 13,738 5057 11,146 5380 11,857 6922 15,256 8742 19,266
1.7 2.2 1.8 2.4 1.55 2.0 2401 7'10" 1464 2,494 1383 2,432 2684 8'9" 933 3'0" 1415 4'7" 2269 7'5" 90 3.5" 6489 21'3" 4765 15'7" 5262 17'3" 5900 13,004 6146 13,546 4979 10,974 5297 11,674 6370 14,039 8776 19,342
ISO Flat Floor 1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1288 2,158 1224 2,207 2638 8'7" 973 3'2" 1425 4'8" 2331 7'7" 88 3.5" 6549 21'5" 4845 15'10" 5282 17'3" 5811 12,807 6053 13,340 4895 10,789 5208 11,478 6032 13,295 8830 19,462
1.5 2.0 1.6 2.1 1.0 1.3 2401 7'10" 1653 2,732 1839 2,758 2788 9'1" 950 3'1" 1494 4'10" 2197 7'2" 88 3.5" 6416 21'0" 4703 15'5" 5239 17'2" 5884 12,967 6129 13,507 4959 10,929 5256 11,584 6674 14,709 8822 19,444
1.6 2.1 1.7 2.2 1.1 1.4 2401 7'10" 1541 2,588 1722 2,619 2973 9'9" 1169 3'10" 1808 5'11" 2230 7'3" 88 3.5" 6449 21'1" 4725 15'6" 5250 17'2" 5855 12,905 6099 13,443 4933 10,871 5229 11,523 6418 14,145 8837 19,477
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. Dimensions listed are for a 914M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
24
1.8 2.4 1.9 2.5 1.2 1.6 2401 7'10" 1350 2,231 1520 2,270 2660 8'8" 955 3'1" 1422 4'7" 2302 7'6" 88 3.5" 6520 21'4" 4811 15'9" 5273 17'3" 5775 12,728 6016 13,258 4859 10,709 5150 11,351 5924 13,056 8878 19,568
Bucket Specifications
914M Operating Specifications with Buckets
High Lift – General Purpose
Pin On Rated Capacity 100% (including BOCE) Rated Capacity 110% (including BOCE) Struck Capacity 17 Width: Bucket Nominal Material Density, 100% Fill Factor Nominal Material Density, 110% Fill Factor 9 Clearance: Full Lift, 45° Dump 14 Reach: Full Lift, 45° Dump Reach: 2130 mm (7'0") Clearance, 45° Dump Reach: Level Arm, Level Bucket 16 Dig Depth 5 Length: Overall 13 Height: Overall 19 Turning Radius: Bucket at Carry Tipping Load – Straight, ISO 14397-1* Tipping Load – Straight, Rigid Tire** Tipping Load – Full Turn, ISO 14397-1* Tipping Load – Full Turn, Rigid Tire** Breakout Force Operating Weight
3
m yd3 m3 yd3 m3 yd3 mm ft/in kg/m3 lb/yd3 kg/m3 lb/yd3 mm ft/in mm ft/in mm ft/in mm ft/in mm in mm ft/in mm ft/in mm ft/in kg lb kg lb kg lb kg lb kgf lbf kg lb
1.4 1.8 1.5 2.0 1.15 1.5 2401 7'10" 1747 2,995 1631 2,868 3237 10'7" 971 3'2" 1782 5'10" 2411 7'10" 272 10.7" 6758 22'2" 4916 16'1" 5424 17'9" 5798 12,779 6040 13,311 4892 10,782 5205 11,470 8860 19,526 8867 19,543
1.6 2.1 1.7 2.2 1.45 1.9 2401 7'10" 1510 2,536 1421 2,575 3188 10'5" 1029 3'4" 1812 5'11" 2487 8'1" 272 10.7" 6834 22'5" 4974 16'3" 5448 17'10" 5734 12,638 5973 13,164 4833 10,651 5141 11,331 8100 17,851 8906 19,629
1.8 2.4 1.9 2.5 1.65 2.2 2401 7'10" 1327 2,193 1257 2,240 3139 10'3" 1085 3'6" 1835 6'0" 2560 8'4" 272 10.7" 6908 22'7" 5062 16'7" 5471 17'11" 5674 12,505 5910 13,026 4777 10,528 5082 11,200 7468 16,458 8942 19,707
IT 1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1250 2,094 1188 2,143 3117 10'2" 1111 3'7" 1845 6'0" 2594 8'6" 272 10.7" 6941 22'9" 5096 16'8" 5482 17'11" 5647 12,445 5882 12,964 4752 10,472 5055 11,141 7207 15,883 8957 19,742
1.3 1.7 1.4 1.8 1.15 1.5 2401 7'10" 1776 2,994 1650 3,008 3193 10'5" 1021 3'4" 1829 5'11" 2477 8'1" 274 10.8" 6825 22'4" 4945 16'2" 5445 17'10" 5499 12,120 5728 12,625 4619 10,179 4914 10,829 8162 17,988 9055 19,957
1.5 2.0 1.6 2.1 1.35 1.8 2401 7'10" 1520 2,512 1425 2,545 3141 10'3" 1083 3'6" 1848 6'0" 2558 8'4" 273 10.8" 6905 22'7" 5027 16'5" 5471 17'11" 5436 11,980 5662 12,479 4559 10,049 4850 10,690 7464 16,451 9095 20,044
1.6 2.1 1.7 2.2 1.45 1.9 2401 7'10" 1417 2,379 1334 2,416 3118 10'2" 1109 3'7" 1857 6'1" 2592 8'6" 273 10.8" 6940 22'9" 5034 16'6" 5482 17'11" 5409 11,920 5634 12,417 4534 9,993 4824 10,631 7198 15,865 9110 20,079
1.7 2.2 1.8 2.4 1.55 2.0 2401 7'10" 1325 2,257 1252 2,201 3094 10'1" 1137 3'8" 1866 6'1" 2628 8'7" 273 10.8" 6976 22'10" 5084 16'8" 5494 18'0" 5378 11,852 5602 12,346 4506 9,930 4793 10,564 6937 15,289 9129 20,119
1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1165 1,951 1106 1,995 3041 9'11" 1176 3'10" 1871 6'1" 2696 8'10" 272 10.7" 7043 23'1" 5165 16'11" 5521 18'1" 5291 11,660 5511 12,146 4426 9,754 4708 10,376 6438 14,188 9182 20,237
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. Dimensions listed are for a 914M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
25
Bucket Specifications
914M Operating Specifications with Buckets
High Lift – General Purpose
ISO Flat Floor
ISO 23727 Rated Capacity 100% (including BOCE) Rated Capacity 110% (including BOCE) Struck Capacity 17 Width: Bucket Nominal Material Density, 100% Fill Factor Nominal Material Density, 110% Fill Factor 9 Clearance: Full Lift, 45° Dump 14 Reach: Full Lift, 45° Dump Reach: 2130 mm (7'0") Clearance, 45° Dump Reach: Level Arm, Level Bucket 16 Dig Depth 5 Length: Overall 13 Height: Overall 19 Turning Radius: Bucket at Carry Tipping Load – Straight, ISO 14397-1* Tipping Load – Straight, Rigid Tire** Tipping Load – Full Turn, ISO 14397-1* Tipping Load – Full Turn, Rigid Tire** Breakout Force Operating Weight
3
m yd3 m3 yd3 m3 yd3 mm ft/in kg/m3 lb/yd3 kg/m3 lb/yd3 mm ft/in mm ft/in mm ft/in mm ft/in mm in mm ft/in mm ft/in mm ft/in kg lb kg lb kg lb kg lb kgf lbf kg lb
1.3 1.7 1.4 1.8 1.15 1.5 2401 7'10" 1740 2,932 1616 2,946 3157 10'4" 1067 3'6" 1856 6'1" 2535 8'3" 273 10.8" 6883 22'6" 4980 16'4" 5458 17'10" 5392 11,883 5616 12,378 4524 9,970 4812 10,606 7633 16,823 9078 20,006
1.5 2.0 1.6 2.1 1.35 1.8 2401 7'10" 1489 2,461 1396 2,493 3105 10'2" 1127 3'8" 1872 6'1" 2614 8'6" 273 10.8" 6962 22'10" 5048 16'6" 5484 17'11" 5330 11,746 5552 12,235 4466 9,842 4751 10,470 7022 15,477 9116 20,091
1.7 2.2 1.8 2.4 1.55 2.0 2401 7'10" 1295 2,206 1223 2,151 3059 10'0" 1181 3'10" 1889 6'2" 2684 8'9" 273 10.8" 7032 23'0" 5119 16'9" 5507 18'0" 5263 11,600 5483 12,084 4404 9,705 4685 10,325 6464 14,246 9150 20,167
1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1139 1,908 1082 1,952 3018 9'10" 1227 4'0" 1905 6'2" 2746 9'0" 272 10.7" 7093 23'3" 5199 17'0" 5528 18'1" 5185 11,428 5401 11,904 4330 9,542 4606 10,151 6127 13,502 9205 20,286
1.5 2.0 1.6 2.1 1.0 1.3 2401 7'10" 1457 2,408 1635 2,431 3141 10'3" 1169 3'10" 1957 6'5" 2612 8'6" 272 10.7" 6959 22'9" 5056 16'7" 5484 17'11" 5232 11,531 5450 12,011 4370 9,632 4633 10,210 7465 16,452 9197 20,269
1.6 2.1 1.7 2.2 1.1 1.4 2401 7'10" 1359 2,282 1532 2,309 3327 10'10" 1389 4'6" 2254 7'4" 2645 8'8" 272 10.7" 6992 22'11" 5078 16'7" 5495 18'0" 5209 11,481 5426 11,959 4349 9,585 4610 10,160 7182 15,828 9212 20,302
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. Dimensions listed are for a 914M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 15.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
26
1.8 2.4 1.9 2.5 1.2 1.6 2401 7'10" 1191 1,969 1354 2,004 3037 9'11" 1205 3'11" 1899 6'2" 2717 8'10" 272 10.7" 7064 23'2" 5164 16'11" 5519 18'1" 5144 11,337 5358 11,809 4288 9,451 4545 10,018 6635 14,623 9253 20,392
Bucket Specifications
918M Operating Specifications with Buckets
Standard Lift – General Purpose
Pin On Rated Capacity 100% (including BOCE) Rated Capacity 110% (including BOCE) Struck Capacity 17 Width: Bucket Nominal Material Density, 100% Fill Factor Nominal Material Density, 110% Fill Factor 9 Clearance: Full Lift, 45° Dump 14 Reach: Full Lift, 45° Dump Reach: 2130 mm (7'0") Clearance, 45° Dump Reach: Level Arm, Level Bucket 16 Dig Depth 5 Length: Overall 13 Height: Overall 19 Turning Radius: Bucket at Carry Tipping Load – Straight, ISO 14397-1* Tipping Load – Straight, Rigid Tire** Tipping Load – Full Turn, ISO 14397-1* Tipping Load – Full Turn, Rigid Tire** Breakout Force Operating Weight
3
m yd3 m3 yd3 m3 yd3 mm ft/in kg/m3 lb/yd3 kg/m3 lb/yd3 mm ft/in mm ft/in mm ft/in mm ft/in mm in mm ft/in mm ft/in mm ft/in kg lb kg lb kg lb kg lb kgf lbf kg lb
1.6 2.1 1.7 2.2 1.45 1.9 2401 7'10" 1937 3,252 1823 3,303 2937 9'7" 833 2'8" 1473 4'9" 2169 7'1" 60 2.4" 6510 21'4" 4737 15'6" 5368 17'7" 7310 16,111 7615 16,783 6198 13,660 6594 14,532 9873 21,760 9267 20,424
1.8 2.4 1.9 2.5 1.65 2.2 2401 7'10" 1701 2,812 1612 2,872 2882 9'5" 881 2'10" 1493 4'10" 2242 7'4" 60 2.4" 6583 21'7" 4825 15'9" 5390 17'8" 7229 15,932 7530 16,596 6124 13,497 6515 14,358 9111 20,081 9302 20,502
IT 1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1603 2,685 1523 2,746 2857 9'4" 902 2'11" 1500 4'11" 2276 7'5" 60 2.4" 6617 21'8" 4859 15'11" 5400 17'8" 7192 15,851 7492 16,512 6091 13,423 6479 14,280 8797 19,388 9318 20,537
1.5 2.0 1.6 2.1 1.35 1.8 2401 7'10" 1954 3,230 1832 3,273 2891 9'5" 889 2'11" 1506 4'11" 2239 7'4" 61 2.4" 6581 21'7" 4790 15'8" 5389 17'8" 6939 15,293 7228 15,930 5863 12,921 6237 13,746 9113 20,085 9455 20,839
1.6 2.1 1.7 2.2 1.45 1.9 2401 7'10" 1822 3,059 1715 3,106 2865 9'4" 911 2'11" 1514 4'11" 2274 7'5" 61 2.4" 6615 21'8" 4797 15'8" 5399 17'8" 6903 15,213 7190 15,847 5830 12,848 6202 13,668 8793 19,378 9471 20,874
1.7 2.2 1.8 2.4 1.55 2.0 2401 7'10" 1704 2,901 1609 2,829 2838 9'3" 933 3'0" 1521 4'11" 2310 7'6" 61 2.4" 6652 21'9" 4847 15'10" 5410 17'8" 6862 15,123 7148 15,753 5792 12,766 6162 13,581 8478 18,685 9489 20,914
1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1497 2,508 1422 2,566 2780 9'1" 966 3'2" 1521 4'11" 2378 7'9" 60 2.4" 6719 22'0" 4928 16'1" 5434 17'9" 6749 14,874 7030 15,493 5690 12,540 6053 13,341 7871 17,348 9543 21,032
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. Dimensions listed are for a 918M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 17.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
27
Bucket Specifications
918M Operating Specifications with Buckets
Standard Lift – General Purpose
ISO 23727 Rated Capacity 100% (including BOCE) Rated Capacity 110% (including BOCE) Struck Capacity 17 Width: Bucket Nominal Material Density, 100% Fill Factor Nominal Material Density, 110% Fill Factor 9 Clearance: Full Lift, 45° Dump 14 Reach: Full Lift, 45° Dump Reach: 2130 mm (7'0") Clearance, 45° Dump Reach: Level Arm, Level Bucket 16 Dig Depth 5 Length: Overall 13 Height: Overall 19 Turning Radius: Bucket at Carry Tipping Load – Straight, ISO 14397-1* Tipping Load – Straight, Rigid Tire** Tipping Load – Full Turn, ISO 14397-1* Tipping Load – Full Turn, Rigid Tire** Breakout Force Operating Weight
3
m yd3 m3 yd3 m3 yd3 mm ft/in kg/m3 lb/yd3 kg/m3 lb/yd3 mm ft/in mm ft/in mm ft/in mm ft/in mm in mm ft/in mm ft/in mm ft/in kg lb kg lb kg lb kg lb kgf lbf kg lb
1.5 2.0 1.6 2.1 1.35 1.8 2401 7'10" 1910 3,158 1791 3,199 2854 9'4" 931 3'0" 1528 5'0" 2295 7'6" 61 2.4" 6637 21'9" 4811 15'9" 5404 17'8" 6788 14,961 7071 15,584 5731 12,630 6096 13,436 8586 18,923 9477 20,886
1.7 2.2 1.8 2.4 1.55 2.0 2401 7'10" 1661 2,830 1569 2,759 2800 9'2" 974 3'2" 1541 5'0" 2366 7'9" 61 2.4" 6708 22'0" 4882 16'0" 5425 17'9" 6700 14,766 6979 15,381 5649 12,450 6010 13,244 7930 17,478 9511 20,962
ISO Flat Floor 1.9 2.5 2.0 2.6 1.75 2.3 2401 7'10" 1464 2,452 1391 2,508 2754 9'0" 1013 3'3" 1553 5'1" 2428 7'11" 60 2.4" 6768 22'2" 4962 16'3" 5445 17'10" 6607 14,561 6882 15,168 5563 12,259 5918 13,042 7513 16,559 9565 21,082
1.5 2.0 1.6 2.1 1.0 1.3 2401 7'10" 1837 3,037 1722 3,065 2024 6'7" 1553 5'1" 1498 4'10" 2190 7'2" 378 14.9" 6491 21'3" 3939 12'11" 5437 17'10" 6540 14,413 6812 15,013 5511 12,146 5842 12,874 8444 18,609 9463 20,856
1.6 2.1 1.7 2.2 1.1 1.4 2401 7'10" 1710 2,870 1609 2,905 2209 7'2" 1774 5'9" 1811 5'11" 2223 7'3" 378 14.9" 6524 21'4" 3961 12'11" 5450 17'10" 6494 14,313 6765 14,910 5470 12,056 5799 12,780 8170 18,006 9478 20,889
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. Dimensions listed are for a 918M configured with bucket, bolt-on cutting edge, optional counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 17.5 R25 (L2) XTLA tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
28
1.8 2.4 1.9 2.5 1.2 1.6 2401 7'10" 1491 2,464 1412 2,508 1896 6'2" 1556 5'1" 1427 4'8" 2295 7'6" 378 14.9" 6596 21'7" 4047 13'3" 5479 17'11" 6379 14,060 6645 14,646 5367 11,829 5689 12,539 7369 16,242 9519 20,979
Bucket Selection Tables
Pin On Pin On Pin On Coupler
918M
Coupler
914M
Coupler
910M
m3
(yd3)
1.4
(1.8)
1.6
(2.1)
1.8
(2.4)
1.3
(1.7)
1.5
(2.0)
1.6
(2.1)
m3
(yd3)
1.4
(1.8)
1.6
(2.1)
1.8
(2.4)
1.5
(2.0)
1.6
(2.1)
1.7
(2.2)
m3
(yd3)
1.6
(2.1)
1.8
(2.4)
1.9
(2.5)
1.6
(2.1)
1.7
(2.2)
1.9
(2.5)
kg/m3 (lb/yd3)
1250 (2,106)
1325 (2,233)
1400 (2,359)
1475 (2,485)
1550 (2,612)
1625 (2,738)
115% 115%
110%
105%
110%
115% kg/m3 (lb/yd3)
1250 (2,106)
110%
1325 (2,233)
1400 (2,359)
115%
110%
105%
105%
110%
105%
105%
1250 (2,106)
110% 1325 (2,233)
110%
110%
105%
105%
itrum 115% 75% Roc k, 2 110% San d an 5% Eart d Gr h avel , We t
110% Grav el, P
100%
1625 (2,738)
1700 (2,865)
115%
110%
1775 (2,991)
1850 (3,117)
105%
1925 (3,244)
2000 (3,370)
100%
100%
105%
110%
105%
105%
100%
100%
100%
1400 (2,359)
1475 (2,485)
115% 115%
1550 (2,612)
110%
110%
1625 (2,738)
105%
105%
1700 (2,865)
115% 105%
100%
1775 (2,991) 110%
1850 (3,117) 105%
100%
100% 115%
110%
100%
100%
110%
115%
115%
2000 (3,370)
100%
115%
kg/m3 (lb/yd3)
t
115%
1925 (3,244)
100%
1550 (2,612)
115%
115%
rth 1850 (3,117)
100%
1475 (2,485)
115%
% Ea 1775 (2,991)
100%
110%
105%
k, 50
1700 (2,865)
115% 115%
110% Sand , We
Fill Factor %
115% 50% Roc
105% Salt , Fin e 110% Hea vy M etal
Material Type
110% Sha le
Scra
p, Lo
105% San d, D 105% Clay ry and L o and Grav ose el, D ry 110% Clay , Na tura 105% San l Be dsto d, D ry 105% Lime ne ston e , Cru 110% Clay sh and Grav er 105% San el, W d an e d Cl 115% 25% ay, L t Roc k, 75 oose 105% Gyp % Ea sum r 105% Gran , Crushe th d ite, B ro 110% Clay , Na ken tura 105% San l Be d an d, W d Gr et 110% San a vel, d, D Dry amp
ose
General Purpose Bucket Selection – Standard Lift
110%
110% 105%
105% 100%
100%
1925 (3,244) 100%
2000 (3,370)
Tip Load Full Turn*
kg
(lb)
5184
(11,425)
5112
(11,266)
5044
(11,116)
5099
(11,238)
5027
(11,079)
4996
(11,011)
kg
(lb)
5384
(11,866)
5309
(11,701)
5240
(11,548)
5219
(11,502)
5187
(11,432)
5152
(11,355)
kg
(lb)
6257
(13,790)
6182
(13,625)
6148
(13,550)
5883
(12,966)
5845
(12,882)
5741
(12,653)
Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized linkage will demonstrate fill factors greater than 100% ISO rated. Refer to the expected fill factor % per material type at the top of the table and find a matching fill factor along the side for proper bucket sizing. *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
29
Bucket Selection Tables
Pin On Coupler Pin On Coupler
914M High Lift
910M High Lift
(yd3)
1.4
(1.8)
1.6
(2.1)
1.8
(2.4)
1.9
(2.5)
1.3
(1.7)
1.5
(2.0)
1.6
(2.1)
1.7
(2.2)
1.9
(2.5)
m3
(yd3)
1.4
(1.8)
1.6
(2.1)
1.8
(2.4)
1.9
(2.5)
1.3
(1.7)
1.5
(2.0)
1.6
(2.1)
1.7
(2.2)
1.9
(2.5)
1025 (1,727)
kg/m3 (lb/yd3)
1100 (1,854)
1175 (1,980)
105% Sand ,D 105% Clay ry and L , and oo Gr av s e el, D ry 110% Clay , Na 105% Sand tural B ed, D sto ry 105% Lime ne ston e, Cr 110% Clay u s he an 105% Sand d Grave d l, W and et Cl 115% 25% Roc ay, Loos k e , 75% 105% Gyps Ear um 105% Gran , Crushe th ite d 110% Clay , Broken , Na 105% Sand tural B ed, an 110% Sand d Grave Wet l, Dr , Da mp y 115% 50% Ro 110% Sand ck, 50% Eart W et h
110%
110% 110% 110% 110%
Fill Factor Factor % %
110% 105% 110%
er, M ixed 105% Ferti liz
Material Type
m3
Coa l An thra Gy p sum cite, W , Pu as h Pea t, W lverized ed e t Coa l An thra cite , Raw Eart h, L o am Salt , Fin , Dry e Hea vy M etal Scra p, L o Sha os e le
General Purpose Bucket Selection – High Lift
1250 (2,106)
1325 (2,233)
1400 (2,359)
1475 (2,485) 115%
115% 115% 115%
110%
110% 105%
105%
110%
105%
1550 (2,612) 110%
105%
100%
115% 115%
kg/m3 (lb/yd3)
1025 (1,727)
105%
110%
110% 105%
110%
105%
105%
1175 (1,980)
115%
100%
1250 (2,106)
1325 (2,233)
1400 (2,359)
1475 (2,485)
1550 (2,612)
110% 105%
105%
110%
105%
100%
105%
1775 (2,991)
100%
100%
115%
105%
110%
1700 (2,865)
100%
115%
115%
1625 (2,738)
100%
115%
110%
100%
100%
115%
115%
105%
100%
1100 (1,854)
110%
110%
100%
115%
115%
100%
100%
115%
110%
1775 (2,991)
100%
115%
115%
1700 (2,865)
1625 (2,738)
110%
110% 105%
105% 100%
110%
105% 100%
100%
110%
105%
100%
Tip Load Full Turn*
kg
(lb)
4823
(10,629)
4764
(10,499)
4708
(10,376)
4683
(10,321)
4734
(10,433)
4674
(10,301)
4649
(10,246)
4620
(10,182)
4539
(10,003)
kg
(lb)
4928
(10,861)
4868
(10,729)
4811
(10,603)
4785
(10,546)
4651
(10,250)
4590
(10,116)
4565
(10,061)
4536
(9,997)
4454
(9,816)
Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized linkage will demonstrate fill factors greater than 100% ISO rated. Refer to the expected fill factor % per material type at the top of the table and find a matching fill factor along the side for proper bucket sizing. *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.
30
Operating Specifications
Operating Specifications with IT Forks
7
Forks – ISO 12 2
6
10 9 1
4
8 5
11 13 3
Forks – Standard Lift IT
910M
914M
Forks – High Lift IT 910M
914M
918M
mm 1200
ft/in 3'11"
mm 1200
ft/in 3'11"
mm 1200
ft/in
3'11"
mm 1200
ft/in
3'11"
mm 1200
ft/in 3'11"
600
1'11"
600
1'11"
600
1'11"
600
1'11"
600
1'11"
6719
22'0"
6706
22'0"
6927
22'8"
7259
23'9"
7259
23'9"
693
2'3"
637
2'1"
744
2'5"
1233
4'0"
1189
3'10"
78
3.1"
51
2"
23
0.9"
256
10.1"
235
9.2"
1354
4'5"
1324
4'4"
1421
4'7"
1769
5'9"
1739
5'8"
502
1'7"
472
1'6"
525
1'8"
722
2'4"
691
2'3"
1640
5'4"
1689
5'6"
1698
5'6"
1640
5'4"
1689
5'6"
9 Clearance: Full Lift
10 Height: Overall
11 Minimum Fork Spacing
3457
11'4"
3485
11'5"
3601
11'9"
3813
12'6"
3838
12'7"
4443
14'6"
4472
14'8"
4588
15'0"
4800
15'8"
4825
15'9"
300
11"
300
11"
300
11"
300
11"
300
11"
12 Carriage Width
13 Maximum Fork Spacing
1550
5'1"
1550
5'1"
1550
5'1"
1550
5'1"
1550
5'1"
1526
5'0"
1526
5'0"
1526
5'0"
1526
5'0"
1526
5'0"
kg 4652 3947 8155
lb 10,252 8,699 17,974
kg 4845 4121 8579
lb 10,677 9,081 18,908
kg 5471 4722 9314
lb 12,058 10,406 20,528
kg 4490 3775 8720
lb 9,896 8,319 19,218
kg 4022 3401 8633
lb 8,865 7,496 19,027
1 Fork Tine Length
2 Load Center
3 Length: Overall
4 Reach: Ground
5 Dig Depth
6 Reach: Level Arm
7 Reach: Full Lift
8 Clearance: Level Arm
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Full Turn, ISO 14397-1*
Operating Weight
Rated Load (% of Full Turn Tip):
50% of Tip: SAE J1197**
1973
4,349
2060
4,540
2361
5,203
1887
4,159
1701
3,748
60% of Tip: Rough Terrain EN474-3**
2368
5,219
2472
5,449
2833
6,244
2265
4,991
2041
4,497
80% of Tip: Firm and Level EN474-3**
3158
6,959
3297
7,265
3777
8,325
3020
6,655
2721
5,996
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Full compliance to EN474-3 and SAE J1197. Dimensions listed are for a machine configured with IT work tool, 80 kg (176 lb) operator and Michelin 17.5 R25 (L2) XTLA tires.
31
Operating Specifications
Operating Specifications with ISO Forks
7
Forks – ISO 12 2
6
10 9 1
4
8 5
11 13 3
Forks – Standard Lift ISO
910M
914M
Forks – High Lift ISO 910M
914M
918M
mm 1200
ft/in 3'11"
mm 1200
ft/in 3'11"
mm 1200
ft/in
3'11"
mm 1200
ft/in
3'11"
mm 1200
ft/in 3'11"
600
1'11"
600
1'11"
600
1'11"
600
1'11"
600
1'11"
6889
22'7"
6877
22'6"
7098
23'3"
7430
24'4"
7429
24'4"
863
2'9"
807
2'7"
915
3'0"
1404
4'7"
1360
4'5"
78
3.1"
51
2"
23
0.9"
256
10.1"
235
9.2"
1525
5'0"
1494
4'10"
1592
5'2"
1940
6'4"
1909
6'3"
673
2'2"
643
2'1"
695
2'3"
892
2'11"
862
2'9"
1640
5'4"
1688
5'6"
1698
5'6"
1640
5'4"
1688
5'6"
9 Clearance: Full Lift
10 Height: Overall
11 Minimum Fork Spacing
3457
11'4"
3485
11'5"
3601
11'9"
3813
12'6"
3838
12'7"
4401
14'5"
4429
14'6"
4545
14'10"
4757
15'7"
4782
15'8"
300
11"
300
11"
300
11"
300
11"
300
11"
12 Carriage Width
13 Maximum Fork Spacing
1550
5'1"
1550
5'1"
1550
5'1"
1550
5'1"
1550
5'1"
1526
5'0"
1526
5'0"
1526
5'0"
1526
5'0"
1526
5'0"
kg 4332 3672 8158
lb 9,548 8,092 17,980
kg 4515 3837 8582
lb 9,951 8,455 18,913
kg 5114 4410 9317
lb 11,271 9,719 20,533
kg 4221 3545 8722
lb 9,303 7,812 19,223
kg 3780 3192 8636
lb 8,330 7,035 19,033
1 Fork Tine Length
2 Load Center
3 Length: Overall
4 Reach: Ground
5 Dig Depth
6 Reach: Level Arm
7 Reach: Full Lift
8 Clearance: Level Arm
Tipping Load – Straight, ISO 14397-1*
Tipping Load – Full Turn, ISO 14397-1*
Operating Weight
Rated Load (% of Full Turn Tip):
50% of Tip: SAE J1197**
1836
4,046
1918
4,227
2205
4,859
1772
3,906
1596
3,517
60% of Tip: Rough Terrain EN474-3**
2203
4,855
2302
5,073
2646
5,831
2127
4,687
1915
4,221
80% of Tip: Firm and Level EN474-3**
2938
6,474
3069
6,764
3528
7,775
2836
6,250
2554
5,628
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Full compliance to EN474-3 and SAE J1197. Dimensions listed are for a machine configured with ISO work tool, 80 kg (176 lb) operator and Michelin 17.5 R25 (L2) XTLA tires.
32
Operating Specifications
Operating Specifications with IT Material Handling Arm
3 2 1
6 5 4
7 8 10
9
17 15
14
16 11 12 13
IT Material Handling Arm – Standard Lift 1
910M 1246 4'1"
914M 1213 3'11"
918M 1336 4'4"
10
910M 1784 5'10"
914M 1832 6'0"
918M 1842 6'0"
2
1705
5'7"
1673
5'5"
1828
5'11"
11
1415
4'7"
1383
4'6"
1611
5'3"
3
2165
7'1"
2133
6'11"
2321
7'7"
12
1962
6'5"
1930
6'3"
2198
7'2"
4
5495
18'0"
5510
18'0"
5600
18'4"
13
2510
8'2"
2478
8'1"
2787
9'1"
5
6382
20'11"
6390
20'11"
6469
21'2"
14
1649
5'4"
1637
5'4"
1538
5'0"
6
7270
23'10"
7271
23'10"
7339
24'0"
15
2485
8'1"
2479
8'1"
2345
7'8"
7
3161
10'4"
3129
10'3"
3229
10'7"
16
3321
10'10"
3323
10'10"
3154
10'4"
17
4826
15'10"
4868
15'11"
4983
16'4"
8
4160
13'7"
4128
13'6"
4227
13'10"
9
5160
16'11"
5128
16'9"
5227
17'1"
Operating Weight Rated Load* (50% of Full Turn Tip** SAE J1197) Minimum Extension (7)
8124 kg
910M 17,905 lb
8548 kg
914M 18,838 lb
9283 kg
918M 20,458 lb
1320 kg
2,910 lb
1383 kg
3,047 lb
1605 kg
3,536 lb
Middle Extension (8)
1034 kg
2,279 lb
1085 kg
2,390 lb
1266 kg
2,790 lb
Maximum Extension (9)
851 kg
1,876 lb
894 kg
1,969 lb
1047 kg
2,308 lb
**Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing. **Full compliance to EN474-3 and SAE J1197. Dimensions listed are for a machine configured with IT work tool, 80 kg (176 lb) operator and Michelin 17.5 R25 (L2) XTLA tires.
33
910M, 914M, 918M Standard Equipment
Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
POWER TRAIN • Cat C4.4 ACERT engine: – Common rail fuel injection – Tier 4 Final/Stage IV • Caterpillar NOx reduction system • Fuel: Ultra Low Sulphur Diesel @ <15 ppm EPA/<10 ppm EU • Engine oil: CJ-4 • Electric fuel pump with 4 micron filtration • S·O·SSM port, transmission oil • Hydrostatic transmission, 20 km/h (12.5 mph) • Lube for life universal joints • Forward – Neutral – Reverse on joystick • 100% locking differentials • Air cleaner, radial seal, dual filters • Cooling fan, on demand • Tires 17.5-25 12PR (914M and 918M only) • Tires 15.5-25 12PR (910M only) • Integrated cyclone precleaner LOADER END • Parallel lift, optimized Z-bar loader REGIONAL STANDARDS (as required) • Back-up alarm • Chocks, bucket tooth or edge • Decals, roading speed • Beacon • Reflectors, roading • Camera, rearview
34
HYDRAULICS • Two valve, single lever joystick • Diagnostic pressure taps • S·O·S port, hydraulic oil • Variable displacement piston pump (914M and 918M only) • Gear pump (910M only) • Cylinder damping at kickout and end stops (918M only) ELECTRICAL • 150 amp alternator • Single 850 CCA maintenance free battery • Roading lights • Battery disconnect switch FLUIDS • Extended life coolant antifreeze, protected to –36° C (–33° F) • Cat Advanced HYDO™ 10 hydraulic oil CHASSIS • Front fender and rear platform • Lockable engine enclosure • Recovery hitch • Vandalism protection – locked service points
OPERATOR ENVIRONMENT • ROPS/FOPS protection • Implement lockout • Electro-hydraulic implement controls • Gauges: – Engine coolant temperature – Hydraulic oil temperature – Fuel level – Speedometer – Digital hour meter – DEF level indicator • Warning system indicators: – Emission malfunction – Air filter restriction – Brake charge pressure low – Engine malfunction – Park brake applied – Electrical system voltage flow – Hydraulic oil filter bypass – Action indicator • Seat: – Fabric or vinyl – Adjustable height, backrest, armrest • Heater/defroster • Tinted front glass, laminated • Adjustable steering column • Rear window defrost • Lockable storage box • Internal 12V power source • External 12V power source
910M, 914M, 918M Optional Equipment
Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN • Axle oscillation limiter • Secondary steering • Sound suppression, EU Prep Package • Extreme temperature engine coolant • High speed option 40 km/h (25 mph) • Tire options: – Bias ply, 15.5, 17.5-25 – Radial, 15.5, 17.5 R25 – Flexport™ LOADER END • Integrated toolcarrier coupler • Linkage, high lift (910M and 914M only) • Wide (ISO) coupler
HYDRAULICS • Three valve auxiliary • Four valve auxiliary • High flow (914M and 918M only) • Screw to Connect Hydraulic Work Tool Connectors • Push to Connect Hydraulic Work Tool Connectors ELECTRICAL • Engine coolant heater (120V or 240V) • Halogen lights, front and rear • LED work lights, front and rear • Heavy duty battery package • Work tool wiring harness FLUIDS • Biodegradable hydraulic oil • Cold weather fuel CHASSIS • License plate holder • Lockable toolbox • Front and rear mud flaps • Rear fenders
OPERATOR ENVIRONMENT • ROPS/FOPS canopy or cab • Premium heated, air suspension seat • Heater and air conditioner • Feature Package: Road/Load/Road & Load • Dependent on package selection, features included are: – Adjustable Rimpull – Ride Control – Adjustable Ground Speed Control – Implement Modulation – Hystat Aggressiveness – Throttle Lock and Adjust – Automatic Loader lift and bucket
kickouts adjustable in cab
• Cat radio • Rear blind • Security system • Retractable seat belt 75 mm (3") • Rearview camera and screen (standard in EU) • Product Link
35
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com © 2017 Caterpillar All rights reserved Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.
AEHQ7972 (01-2017) (Am North, EU)
