Preview only show first 10 pages with watermark. For full document please download

9241 〉〉 Analog Audio Distribution Amplifier - Av-iq

   EMBED


Share

Transcript

ANALOG AUDIO DISTRIBUTION AMPLIFIER / 9000 SERIES 9241 〉〉 ANALOG AUDIO DISTRIBUTION AMPLIFIER The 9241 is an analog audio distribution amplifier with up to eight low-impedance outputs designed for broadcast use. It can be used as either a mono or two-channel (stereo) audio DA. The 9241 can provide eight copies of a single (mono) input signal or four copies each of a two (stereo) inputs. The 9241 can also sum two channels for creating a mono mix. It can also detect dead-air silence and set an alarm when no audio is present. G G -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ 2-3 -+ -+ -+ -+ - + - + - + - + -+ -+ -+ -+ G 2-4 2-4 -+ -+ -+ -+ -+ -+ -+ G CARD 1 OUT 2-2 1-4 2-1 -+ G 1-3 -+ OUT 2-1 2-2 2-3 OUT 2-1 2-2 2-3 G G 2-3 -+ OUT IN-2 G 1-1 1-2 1-3 OUT IN-2 G 1-1 1-2 1-3 RM20-9241-C/S 1-2 G -+ G IN-1 G IN-1 Note: Outputs 2-1 thru 2-3 are outputs 1-4 thru 1-6 when card used in mono DA or mono mix DA mode. CARD 1 G G G G Analog Audio Output Number of Outputs: 8 Impedance: 60 Ω balanced Max Level: +26 dBu G >0.1 dB at 20 Hz to 20 kHz -14 dB to +18 dB cont. variable <0.01% > 95 dBu CARD 2 OUT 2-2 1-4 2-1 Analog Audio Input Number of inputs: 2 balanced Impedance: >20 kΩ balanced Max Level: +27.5 dBu Common Mode Rejection: >80 dB, 20 Hz to 20 kHz Performance Freq. Response: Gain: Harmonic Dist: SNR: CARD 1 1-1 G 1-3 3 watts AN OUT 2-4 G G 1-2 〉〉 SPECIFICATIONS Electrical Power: AN OUT 2-3 G G 1-1 9241 AN OUT 2-2 G + Ethernet 10/100 (On Frame) AN OUT 2-1 G G - RM20-9241-B CARD 2 DashBoard™/OGCP Monitor/Control AN IN 2 G + DA G - Gain Mode Selection + Analog Audio In 2 DA AN OUT 1-4 Gain G - AN OUT 1-3 Analog Audio In 1 Analog Out 1-1 Analog Out 1-2 Analog Out 1-3 Analog Out 1-4 Analog Out 2-1 Analog Out 2-2 Analog Out 2-3 Analog Out 2-4 + Five year warranty Silence detection G - AN OUT 1-2 Has summing capability + AN OUT 1-1 Remote control/monitoring via DashBoard™ software or OGCP-9000 remote control panel G - AN IN 1 〉〉 FEATURES Handles mono or stereo signals - + CARD 2 G-+ G-+ G-+ G-+ IN 2 IN 1 IN 2 IN 1 Note: Outputs 2-1 thru 2-4 are outputs 1-5 thru 1-8 when card used in mono DA or mono mix DA mode. RM20-9241-D/S 〉〉 ORDERING INFORMATION 9241 Analog Audio Distribution Amplifier, 1 X 8 Mono or 1 X 4 Stereo, with Summing Control RM20-9241-B 20-Slot Frame Rear I/O Module (Standard Width) 2 Differential Analog Audio In, 8 Differential Analog Audio Outs COBALTDIGITAL.COM RM20-9241-C/S 20-Slot Frame Rear I/O Module (Split) Dual 1x3 Differential Analog Audio I/O RM20-9241-D/S 20-Slot Frame Rear I/O Module (Split) Dual 1x4 Differential Analog Audio I/O US SALES 800 669-1691 / DIRECT +1 217-344-1243 / [email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. E. & O.E. ©2013 COBALT DIGITAL INC. 3/2013