Transcript
Congratulations for buying a quality product. FERMAX ELECTRONICA S.A.E. manufactures and sells its well known prestigious equipment, designed to the most technologic and aesthetic requirements. The components of this KIT have been designed by Ramón Benedito, National Spanish Design Award winner, and developed by FERMAX ELECTRÓNICA S.A.E. We hope you will have many years of service from it. If you wish further information about FERMAX, or make any sugestion, contact us in the web (http:\\www.fermax.es).
ENGLISH Pag 16
INDEX
INTRODUCTION .................................................................................................. 18 THE CITYMAX MONITOR ................................................................................... 19 THE OUTDOOR PANEL ....................................................................................... 19 Camera Test Connector detail ................................................................ 20 MONITOR INSTALLATION .................................................................................. 20 OUTDOOR PANEL INSTALLATION .................................................................... 21 POWER SUPPLY INSTALLATION ...................................................................... 23 OPERATION ........................................................................................................ 24 INSTALLATION DIAGRAMS ............................................................................... 25 How to add terminals .............................................................................. 27 ACCESORIES ...................................................................................................... 28 Extension call .......................................................................................... 36 Stair light Relay ....................................................................................... 28 Second door control ............................................................................... 28 Connection to TV set ............................................................................... 28 TROUBLESHOOTING HINTS .............................................................................. 29
KIT VIDEOCHALET CITYMAX Cod: 94017
Pag 17
INTRODUCTION The KIT VIDEOCHALET CITYMAX is an advanced Video Door Entry professional system to be installed in bungalows or small residential complexes. It is basically made up of an Outdoor Panel, which is installed outside the house, and a Monitor, installed inside. Moreover, the corresponding Power Supply must be installed in an inner place. VERY IMPORTANT NOTES:
The Outdoor Panel is protected against humidity and atmosferical agents. In adverse conditions with permanently hard rain or salty environment, it is recommended to install the Panel with a hood or under shelter. Strong light coming straight into the camera (against the light) will produce contrast and/or brightness losses.
To install the Monitor, choose a hard and flat surface, far away from direct heat sources (radiators, heaters, ...) or very smoky environments (kitchens, etc.). We advise to install the Monitor in a place where the call could be heard all inside the house.
The Power Supply should be installed on a hard and flat surface, as inside the buiding as in the lobby, etc... but always in inner places. It can be installed in a DIN box for electric switches.
Before installing the KIT VIDEOCHALET CITYMAX, install the cables needed to Monitor (or monitors), Outdoor Panel and Power Supply, following the installation diagram.
Pag 18
THE CITYMAX MONITOR DOOR RELEASE push button
AUTO SWITCH-ON push button
1
N TIO OLU R ES ITO HR ON HIG TM FLA
1
2 2
*
2nd CAMERA connection
STAIRS LIGHT push button
BRIGHTNESS control ON/OFF switch
CONTRAST control
*
Only in installations with AUXILIARY CAMERA KIT or ADDITIONAL VIDEO PANEL (optional).
THE OUTDOOR PANEL Volume for OUTDOORPANEL AMPLIFIER mesh
T. EX
- INT. -
Volume for MONITOR
+ +
Terminals for CONNECTION
CAMERA module
VM
HIG H CC RESO D C LU AM TIO ERA N PAN &T ILT
CALL Push buttons KIT VIDEOCHALET CITYMAX Cod: 94017
0° ±1 Tilt T n & TES Pa
PAN & TILT control
CT +-
TEST connector PUSHBUTTON connector Pag 19
Camera Test Connector detail The test connector included in the CityMax camera is used for testing that both camera and Monitor are working correctly. Once the Monitor is plugged into this connector the screen will be activated automatically.
VM
TE
VM
CT +-
ST
CT +-
1. TEST connector Detail.
2. Monitor Test directly in the Outdoor Panel.
MONITOR INSTALLATION The CityMax monitors allow a quick and easy installation, without neccesity of doing any kind of building-work. Do not remove the screen protection film until the Monitor is completely installed.
3
90º
2
0mE 1.6M TH R O FR OO FL
1 1. Use a plain screw-driver to separate the base from the Monitor. Put it in, rotate and slide the Monitor up. Pag 20
2. Install the Monitor on a hard and flat surface. Mark and drill the wall at the holes in the base.
3
2 N TIO LU SO H RE NITOR HIG T MO FLA
1
2
N TIO OLU H RES NITOR HIG T MO FLA
1
2
1 90º
3. Once the wires are connected, plug in the connector and place the Monitor following this sequence: 1
Plug-in the connectors.
2
Hang the Monitor in the hooks.
3
Push down the Monitor.
4. To unhook the Monitor, insert the screwdriver in the notch , turn it a few degrees and slide up the Monitor.
OUTDOOR PANEL INSTALLATION Follow the recommendations shown in this chapter to install the Outdoor Panel correctly. Do not forget to remove the protective plastic film in the front of the camera once the installation is finished.
1.7m
1.Before embedding the box, break the flange where the cables will be passed through. KIT VIDEOCHALET CITYMAX Cod: 94017
2.Place the embedding box at the desired height (1.7m aprox.). Make sure that the box is totally flush with the wall. Pag 21
EX
T.
- INT.
+ T EX.
+
-
- IN.T -
+ +
VM
VM TE
ST
CT +-
Pa
° ±T 10 n ilt& TEST
CT +-
3.Place the waterproof tapes supplied with the KIT.
4.Use the hinges to connect the wires and handle the Panel comfortably.
VM 0° ±1 Tilt T n & TES Pa
CT +-
AIRA M ACRO L
HIG H CC RESO D C LU AM TIO ERA N PAN & TIL T
5.Push up the houvre behind nameplate the louvre and place the label. You can use the labels supplied with the Outdoor Panel.
6.Close the Panel and fasten the screws with the allen key supplied. Place the covers to finish the installation.
NOTE:
VM 0° ±1 Tilt T n & TES Pa
CT +-
Pag 22
The camera included in the Outdoor Panel has a Pan&Tilt control which allows the objetive to be moved 10° in all directions, so to focus the camera into the desired direction, during the Panel installation.
POWER SUPPLY INSTALLATION Finally, the Power Supply must be placed in a place dry and safe from the weather. Its DIN 10 format allows you to install it in any type box or directly on the wall by using the wallplugs and screws supplied.
MA DE
50-6
0 Hz.
+1
M IN
AD
E
SP AIN
50VA
8V 12 V
MAX
.
FU
1. 5A 1A
12
EN
TE AL KIT IMEN VID TACI EO ON
50-
60
Hz.
IN
SP AI
50V A MA
+18V 12V
N
EN TE A KIT LIME VID NTAC EO ION
X.
V
12
1. Drill 2 holes in the wall, place the wallplugs and fasten the screws, fixing the Power Supply to the wall.
V
2. The Power Supply can be fitted on a DIN rail inside a box pressing it as shown in figure. 50 -60
Hz.
50
+18 V 12V
M AD E
5060
+1 1
VA
FU EN TE KIT ALIM VID ENTA EO CIO N
MAX
.
IN
H A MA X.
FU
EN TE A KIT LIME VID NTAC EO ION
1.5 1A A
12
12
V
V
3. The Power Supply can be unmounted from the DIN rail by levering at the flange with a flat screw-driver.
4.Plug-in the wires in the corresponding terminals following the installation diagrams attached.
NOTE: The Power Supply must be installed in a place dry and safe from inclemency of weather. It is advisable to install it protected through a thermo-magnetic circuit breaker at the main input. KIT VIDEOCHALET CITYMAX Cod: 94017
Pag 23
OPERATION Calling * When the monitor is idle, the screen and the led indicator are off. When the call pushbuton at the Outdoor Panel is pressed a tone is heard from the monitor but also from the outdoor panel. The screen turns on and led indicator turns off. Call sound is also heard in any additional equipments in the same house. If the call is unattended the equipments will automatically turn off after 90 seconds.
ION
LUT SO H RE NITOR HIG T MO FLA
1
2
N TIO OLU H RES NITOR HIG T MO FLA
Attending the call * Picking up the handset it is possible to establish a conversation with the visitor. Conversation time is not limited. Video will turn off after 90 seconds but you can speak as long as you want or since handset is placed on the cradle.
1
2
N TIO OLU H RES NITOR HIG T MO FLA
1
2
N TIO OLU H RES NITOR HIG T MO FLA
1
2
Opening the door to the visitor * Whenever you want, you can open the door pressing the but. ton
Manual activation (autoswitch on) * It is possible to activate the monitor in any moment pressing the button 1 . The screen will turn on for 90 seconds. Then it will turn off automatically. Picking up the handset it is possible to speak with the person on the front of the outdoor panel and it is also possible to open the door (same as if a call were made).
NOTE: * The switch ON/OFF for a long period of time. Pag 24
must be ON. Switch OFF if it is not going to be used
INSTALLATION DIAGRAMS The following are the installation diagrams for the KIT VIDEOCHALET 1 and 2 lines. Check suitable wire sections with the table. WIRE SECTION AREA TABLE LENGHT (meters)
Thin lines on shematics
Thick lines on schematics
COAXIAL RG59
less than 300
0,5 mm2
1 mm2
75 Ohm
300 - 500 500 - 1.000
1
mm2
1 mm2
1
mm2
1,5 mm2
A B C I P1 P2 P3 P4 CAM1 CAM2 LE
75 Ohm 75 Ohm
M V V M + CT 1 2 3 4 6 7 E +S
CN1
VAC
+ - + PRIM 220V
SEC. 18 Vdc
EXT.
AMPLIFICADOR CITY KIT Ab Ab
+ - CT
INT.
1 2 3 6
V M
1
Wiring for KIT VIDEOCHALET CITYMAX 1/L Ref. 6002 KIT VIDEOCHALET CITYMAX Cod: 94017
Pag 25
WIRE SECTION AREA TABLE LENGHT (meters)
Thin lines on shematics
Thick lines on schematics
less than 300
0,5 mm2
1 mm2
75 Ohm
300 - 500
1 mm2
mm2
75 Ohm
500 - 1.000
1 mm2
1
1,5 mm2
COAXIAL RG59
A B C I P1 P2 P3 P4 CAM1 CAM2 LE
75 Ohm
M V V M + CT 1 2 3 4 6 7 E +S
CN1
A B C I P1 P2 P3 P4 CAM1 CAM2 LE M V V M + CT 1 2 3 4 6 7 E +S
Cut the Resistor CN1
VAC
+ - + PRIM 220V
SEC. 18 Vdc
EXT.
AMPLIFICADOR CITY KIT Ab Ab
INT.
1 2 3 6
+ - CT
V M
1
2
Wiring for KIT VIDEOCHALET CITYMAX Ref. 6006 Pag 26
How to add terminals The standard equipment in each apartment can be extended to a maximum of 2 telephones or 1 additional monitor, without adding power supplies. For installations in 2 flats (KIT CIDEOCHALET CITYMAX 2/L) a secondary Monitor may be added in one of them as well.
A B C I P1 P2 P3 P4 CAM1 CAM2 LE
R E F. 8 0 2 9
ADDITIONAL TELEPHONES (REF.8044)
CN1
101CI15B
M V V M
1 234 56
101CI15B
MONITOR
1 234 56
+ CT 1 2 3 4 6 7 E +S
Extension with 2 additional telephones ADDITIONAL MONITOR A B C I P1 P2 P3 P4 CAM1 CAM2 LE
MONITOR IN 2nd FLAT A B C I P1 P2 P3 P4 CAM1 CAM2 LE M V V M
M V V M + CT 1 2 3 4 6 7 E +S
CN1
+ CT 1 2 3 4 6 7 E +S
CN1
MONITOR 1st FLAT
MONITOR
A B C I P1 P2 P3 P4 CAM1 CAM2 LE M V V M
C U T RESIST. CN1
M V V M
C U T RESIST. CN1
+ CT 1 2 3 4 6 7 E +S
KIT1/LwithadditionalMonitor KIT VIDEOCHALET CITYMAX Cod: 94017
ADDITIONAL MONITOR 1st FLAT
A B C I P1 P2 P3 P4 CAM1 CAM2 LE
+ CT 1 2 3 4 6 7 E +S
A B C I P1 P2 P3 P4 CAM1 CAM2 LE M V V M
C U T RESIST. CN1
+ CT 1 2 3 4 6 7 E +S
KIT2/LwithadditionalMonitor(cascadeconnection) Pag 27
ACCESORIES Extension call The electronic extension call (Ref. 2040) is used for extending the call sound in a place different from the one where the Monitor is installed, for instance in the garden.
A B C I P1 P2 P3 P4 CAM1 CAM2 LE
CN1
M V V M + CT 1 2 3 4 6 7 E +S
CN1
Ref. 2040
MONITOR RELE LUZ DE ESCALERA STAIRS LIGHT RELAY
REF. 2013
Stairs light relay The relay (Ref. 2013) is used to activate an external device as stair or garden light, by means of the pushbutton in the Monitor .
A B C I P1 P2 P3 P4 CAM1 CAM2 LE
CN1
LE
3
+ 4
3
4
Max. 2A
M V V M + CT 1 2 3 4 6 7 E +S
CN1
TO THE STAIRS PUSHBUTTON
MONITOR
Second door control The relay (Ref. 2013) can also be used to control the release of a second door where there is no outdoor panel by means of the stair light pushbutton on the Monitor . It is required an additional power supply Ref. 2986.
Connection to TV set The Monitor can be connected directly to a TV set with an EUROCONNECTOR, so that the image from the Outdoor Panel is shown on the TV.
Pag 28
Vac RELE LUZ DE ESCALERA STAIRS LIGHT RELAY
REF. 2013
CN1
A B C I P1 P2 P3 P4 CAM1 CAM2 LE
PRIM 220V LE
3
+ 4
Max. 2A
REF.2986 3
4
SEC. 12Vac
M V V M + CT 1 2 3 4 6 7 E +S
CN1
CN1
A B C I P1 P2 P3 P4 CAM1 CAM2 LE M V V M
CN1
Cut the ressistor
19 17 15 13 11 9 7 5
+ CT 1 2 3 4 6 7 E +S
3 1
20 18 16 14 12 10 8 6 4 2
EUROCONNECTOR
TROUBLESHOOTING HINTS Some typical problems may be easily solved if you follow closely this chapter and you do the tests shown in the following steps. The image does not appear in the Monitor 1. Check that the Monitor is switched on (on/off switch). 2. Check that the power supply is correctly connected, and the voltage is 18 Vdc between terminals "+" and "-". 3. Verify that there is no short between "V" and "M" in the coaxial cable. 4. When a call has been performed, the voltage between terminal "-" and "CT" must be 10 Vdc or higher. There is no speech to the Outdoor Panel, but there is to the Monitor 1. Check that terminal "1" connection (the electric lock cannot be released). 2. Check the connection of terminal "2". 3. Verify that there is no shortcut between wires "1" and "2". 4. Check that there is no shortcut between terminals "1" and "3" (the electric lock will be continuously released). There is no speech to the Monitor, but there is to the Outdoor Panel 1. Check that terminal "6" is correctly connected. 2. Check the connection of terminal "3" (the door release function and the call tone will not be operative). 3. Verify that there is no shortcut between wires "3" and "6". No call tone 1. Check that terminal "4" connection is correctly connected. 2. Check the connection of terminal "3" (there is no speech from Panel to Monitor).
KIT VIDEOCHALET CITYMAX Cod: 94017
Pag 29
